ein used for sale

Technical data: To 800Liter juice/STD (for apples) weight approx. 650 kg and 500mm power band width easy cleaning of the machine of EU funding possible state: as good as new

1 factory-tested, well-preserved single-girder ceiling crane Load approx. 3,200 kg Wingspan approx. 6.280 mm Hook path about 12,000 mm Make DEMAG Year of production/workshop testing 1991/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

Technical data: Fruit 750 mm tape speed press power up to 1500 kg / hour yield to 75% bandwidth continuously adjustable incl. Incl. air compressor high pressure cleaner Condition: new

Cardboard packer with 3 heads

Counting machine for bread rolls, Fabr. P + S

This is a Combi Rack Type 10-1/1 suspension rack from Rational, for the iCombi Pro and iCombi Classic 10-1/1 models. With this suspension frame, it is possible to use Bäckernorm 600x400 trays and Gastronorm trays. The RRP is €599 net. The price quoted is gross including 19% VAT (Net price: 494,96€) OUR SERVICE FOR YOU: High-quality brand-name appliances at fair prices Professional overhaul / inspection & expert cleaning tested & fully functional - or money back Shipping or self-collection can be flexibly selected Competent advice - before and after the purchase Provision of operating instructions, connection diagrams and spare parts Testing according to DGUV V3 seal ARTICLE NUMBER: 60.11.563 Condition: New VERSAND / SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations o ...

1 factory-tested ceiling crane girder Lifting capacity 3000 kg Wingspan approx. 6,800 mm Hook way approx. 8,000 mm Make MAN GHH Year of production/workshop testing 1988/2016 equipped monorail trolleys, short type, freely movable floor control Working speeds: Hoist around 0.8/8.0 m / min Trolley gear approx. 4.0/16.0 m / min Crane chassis approx. 8.0/32.0 m / min

1 neuwertiger, factory-tested single overhead travelling crane with angle trolley Oblique cord stabilization for traverse operation Payload 10.000 kg Span approximately 15,850 mm make VOITH Year of production/workshop test 1995/2016 Lasting only 1 year equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation (magnetic control prepared, but not included in the delivery), trolley with frequency control operating speeds, cradle frame, radio remote control: Hoist load approx. 0 8.3 m / min Load approx. 0 22.0 m / min Trolley gear 0-40.0 m / min Crane chassis 0-60.0/90.0 m / min

1 factory-tested, very well-preserved single-girder crane Lifting capacity 3,200 kg Span approximately 6,000 mm hook path Max 12,000 mm Make DEMAG Year of production/workshop test 1993/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist CA. 1.0/6.3 m / min trolley gear approx. 14.0 m / min crane chassis 10.0/40.0 m / min

10,000 pieces of grating gratings for pallet shelves galvanized Insertion grids available in different sizes, mesh widths, support rod and weight load: Negotiation price: from € 5,-- net per piece from stock Price with € 5,-- refers to the insert ingerate with the size 24.5 x 104.5 cm Larger quantities on request! Insertion grid Mesh width 80 x 89 cm 2.5 x 2.5 cm 99.5 x 49.5 cm 3 x 3 cm 99.5 x 99.5 cm 3.5 x 3.5 cm 100.5 x 98.5 cm 4.5 x 1.1 cm 104.5 x 24.5 cm 6.5 x 3 cm 108.5 x 111 cm 6.5 x 6.5 cm 120 x 89.5 cm 7 x 3.5 cm 120 x 109 cm 7 x 4.5 cm 125.5 x 59 cm 7 x 7 cm 128.5 x 81 cm 129 x 118 cm support rod 132.5 x 111 cm 20 mm x 2 mm 134 x 76.5 cm 25 mm x 2 mm 134 x 92 cm 30 mm x 2 mm 134.5 x 99.5 cm 35 mm x 2 mm 134.5 x 122 cm 40 mm x 2 mm 143.5 x 124 cm 45 mm x 2 mm 157.5 x 81 cm 170 x 150 cm 179 x 121 cm Used goods, very good condition, see  ...

Offer of a drive-in shelf with about 500 parking spaces. Max load per pallet approx. 800 kg More information against request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error a ...

1 factory-tested, very well-preserved single-girder crane with angle trolley load approx. 4,000 kg Load trolley CA 5,000 kg Wingspan approx. 7.100 mm Make steel Year of production / workshop testing 1986/2016 Crane radio control equipped with angle trolley for a perfect hook road, Working speeds: Hoist 0.5/3.25 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

1 factory-tested single girder overhead travelling crane lifting capacity 5000 kg Span around 10,000 mm Hook way max. 5.000 mm Make steel Year of production/workshop test 1983/2016 Crane equipped with steel monorail trolley, freely movable floor control Working speeds: Hoist 0.5/3.4 m / min Trolley gear 16.0 m / min Crane chassis 4.0/16.0 m / min

Features • Condition: as good as new • Colour: galvanised • Dimensions: 875 x 1115 x 45 mm • Mesh size: 50 x 112 mm • Load: 500 kg per grid • For beam length 1800 mm: 2 pieces required • For beam length 2700 mm: 3 pieces required • For beam length 3600 mm: 4 pieces required Price € 16,- net excl. VAT From 1,000 pcs. € 12,- net per pc. • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Viewing and pick-up: possible at any time by appointment Over 5000 linear metres of pallet racks from numerous manufacturers in stock at all times (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

1 factory-tested, very well preserved single girder crane angle load approx. 5,000 kg Wingspan approx. 10,000 mm Hook path about 7,500 mm Make steel Workshop examination 2016 Floor control equipped with angle trolley for optimal hook path, freely movable working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 4.0/16.0 m / min

Pressure: 16 bar

Pressure: 14 bar

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -single acting -Piston rod: Ø 40 mm, M16 x 2 -Stroke: 710 mm -Total length: retracted 850 mm -Hole: Cylinder: Ø 40 mm -Price: per piece -Quantity: 4 pieces -Dimensions: 850/156/H110mm -Weight: 19 kg/piece

1 factory-tested, well preserved double girder crane Load capacity 5000 kg Span width 14.780 mm Hook path maximum approx. 8,000 mm Make RÖTTGER/Demag Workshop examination 2016 Floor control freely movable with DEMAG double girder trolley, Working speeds: Hoist approx. 0.8/8.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

Platform trolleys, transport trolleys, heavy trucks, table trolleys, assembly trolleys -Material: stainless steel -for: pump transport -Area: 300 x 1610 mm -External dimensions: 2160/580/H400 mm -Own weight: 58 kg

Microprocessor controller, temperature controller, injection molding machine -Number: 11 control loops -Control connections -Weight: 20 kg

Cup hinge drilling machine -Stops: pneumatically controlled with program selection -Drilling pattern: see the pictures -Dimensions: 4000/1100/H1800 mm

1 plant be certified, very well received. Single girder overhead travelling crane with angle trolley Load approx. 5,000 kg Wingspan approx. 16.750 mm hook path maximum approx. 8,000 mm Make VOITH Year of production/workshop test 1993/2016 equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation including load beam, with frequency control, maintenance Jetty, radio control Working speeds: Hoist up to 20.0 m / min Trolley gear up to approx. 26.0 m / min Crane chassis up to approx. 90.0 m / min

1 factory-tested single angle crane in design with laterally movable carrier trolley Load approx. 5,000 kg Span approximately 33,000 mm Hook way max. 9000 mm Make AUMUND/steel Year of production/workshop test 1981/2016 with steel angle trolley for maximum hook path, DEMAG Kranfahran- drove, corridor control freely movable Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear 10.0/40.0 m / min Crane chassis up to 60.0 m / min

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, immersion pump -Cooling water pump: coolant pump -Engine: Cantoni 3.0 kW -Immersion depth: 450 mm -Dimensions total: 500/340/H880 mm -Weight: 74 kg

electric motor, drive motor, engine -Manufacturer: Einhell, electric motor from column drill TB 13/5 EK -Power: 0.25 kW / 1420 rpm -Shaft: Ø 14 x 30 mm -Number: 6x motor available -Price: per piece -Dimensions: 185/123/165 mm -Weight: 4.6 kg/piece

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 14,200 mm Hook path about 8.000 mm Fabrikat DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

Machine reamers, reamer, reaming tool, locating knife cutting set -Manufacturer: Loewe, adjustable machine reamer -Diameter: Ø 26 mm -Recording: MK1 -Dimensions: Ø 26 x 290 mm -Weight: 0.6 kg

Machine reamers, reamer, reaming tool, locating cutter set, attachment reamer -Machine reamer: adjustable, 2 pieces -Diameter: Ø 32/55 mm -Mounted holder: MK3 -Submission/Price: complete -Transport dimensions: 360/90/H60 mm -Weight: 3.6 kg

Machine reamers, reamer, reaming tool, locating knife cutting set -Machine reamer: adjustable, 3 pieces -Diameter: Ø 28/30/38 mm -Recording: MK2 -Submission/Price: complete -Transport dimensions: 340/100/H40 mm -Weight: 2.7 kg

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 19.134 mm Hook path about 8.000 mm Fabrikat ABUS/DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

Machine reamers, reamer, reaming tool, locating knife cutting set -Manufacturer: Kahaco, Adjustable machine reamer, 6 pieces -Diameter: Ø 24/26/31/32/33/38 mm -Recording: MK3 -Submission/Price: complete -Transport dimensions: 380/180/H45 mm -Weight: 6.8 kg

Machine reamers, reamer, reaming tool, locating knife cutting set -Manufacturer: Kahaco, adjustable machine reamer -Diameter: Ø 62 mm -Recording: MK4 -Dimensions: Ø 62 x 455 mm -Weight: 4.3 kg

2 factory-tested, well preserved single girder cranes Payload 7000 kg Wingspan approx. 16.650 mm Hook way approx. 4,000 mm Fabrikat DEMAG/MAN-SWF Workshop tests 1987/1991/2016 Cranes equipped with DEMAG and SWF monorail trolleys with short design, freely movable floor control Working speeds: Hoist CA. 0.3/3,1 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

2 factory-tested, well-preserved single girder suspension cranes Payload 10.000 kg Gauge approximately 17,700 mm Lifting height Max approx. 9,300 mm Make MAN / SWF Year of construction/workshop test 1987 1990/2016 Service life approx. 3 years with SWF monorail trolleys short type, long travel rate programs, freely movable floor control Working speeds: Hoist CA. 0,8/8 m / min Trolley gear approx. 20 m / min Crane chassis approx. 40 m / min

1 factory-tested, absolutely like new single angle crane Payload 10.000 kg Wingspan approx. 26.610 mm Hook path about 10,000 mm Make DEMAG Year of production/workshop test 2001/2016 Crane equipped with electric wire rope hoist moving on the side of the vehicle, cross and long travel frequency controlled remote control, Working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear (FU) approx. 0-30,0 m / min Crane chassis (FU) approx. 0-40.0 m / min

1 factory-tested, very well-preserved single-girder crane Load trolley CA 10,000 kg Lifting capacity crane approx. 20,000 kg Wingspan approx. 39,500 mm hook path approximately 15,000 m Make helper / ABUS Year of production / workshop testing 2012/2016 Crane equipped with floor control as emergency steering, ABUS monorail trolley, radio control Working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear infinitely variable approx. 1.0 20.0 m / min Crane chassis approx. 10.0/40.0 m / min

Pull-off trolley with 9 cloth pull-off apperates suitable for Heuft VTR Thermo Roll / Daub RDTO Thermo Roll oven. The pullers can be used for ovens with 2 times deep sheet metal mass 80x60cm. With this pull-off appress and a stone slab trolley, they can also bake in the Thermöl wagon oven on stone served by a Man.Option we also have the stone slab cart for two times deep oven in the warehouse. with 9 pullers on rolls Stainless steel trolley Dimensions wagons: Height: 196 cm Width: 160 cm Depth: 90 cm

1.Powder curing furnace 2,000 x 1,900 x 2,000mm, manufacturer Kigo O.E.! 1 Inner dimension length 2,000 mm 2 Inner dimensions width 1,900 mm 3 Inner dimension height 2,000 mm 4 Outer dimensions incl. thermoblock length 2,300 mm 5 Outer dimensions incl. thermoblock width 2,300 mm 6 Outer dimensions incl. thermoblock height 2,700 mm 7 Substructure 1 set of steel profile 50 x 50 mm 8 walls 1 set of double-sided galvanized sheets 1mm, outside RAL 5005 9 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 10 floor stove gets 2 entry rails for tray wagons 11 Temperature 220°C 12 fans 1 pc. 6,000 m³/h 13 electric motors 1 pc 1.1 kW , 1450 rpm, 3 F, 50 Hz 14 Thermal output 36 kW = 30,960 kcal/hour 15 wing doors on one side 2 pcs insulated with rock wool 150mm 70Kg/m² Heating Indirectly via thermoblock Thermoblock 1 set stainless steel INOX AISI 316 heat-resistant fa ...

Powder curing furnace 2,000 x 1,900 x 2,000 mm 1 Inner dimension length 2,000 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m³/h 10 electric motors 1 pc 2.2 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 33 kW 12 hinged doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set of stainless steel INOX with heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc oven is electrically operated 15 Exhaust air 1 pc device for exhaust air pipe, manual flap guide

Bottling line for breweries – capacity: 15,000 bottles per hour This bottling line was installed in 2015 by the German manufacturer Hormes as part of a complete brewery. The entire bottling line has been dismantled and is available. The production capacity is 15,000 bottles per hour, ideal for 0.33-liter non-returnable glass bottles. Components of the filling line: New glass lifters | Hormes • Pallet size: Suitable for new glass pallets measuring 1000 mm x 1200 mm • Drive: Electrically operated chain hoist for efficient lifting operations • Truss length: approx. 4,500 mm Fully Automatic Rinser | Hormes • Capacity: Up to 15,000 bottles per hour • Nozzles: At least 36 spray nozzles, matched to a specific bottle size • Cleaning: Cleaning the inside of the bottles with fresh water, spraying time approx. 1.5 sec., draining time approx. 5 sec. Automatic Bottle Fi ...

screw ø:: 120 mm screw length:: -- screw speedl:: -- U/min drive power:: 36 kW Condition: used - Specification: Single screw TPE extruder type 120 - second-hand - Screw diameter: 120 mm - Dimensions length approx.: 3.000 mm Width approx.: 1,700 mm Height approx.: 1,900 mm - Output approx.: 215 kg/h - Motor power: 36 kW - Weight approx.: 2,300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Drill Diameter: 1.5 - 3 Drill chuck holder: B16 Spindle stroke: 50 mm Projection: 150 mm Column diameter: 46 mm Motor power: 350 W Connection: 230 V Dimensions (WxDxH), approx.: 220 x 450 x 590 mm Weight, approx.: 55 kg Equipment: - Machined foot with T-slots - Sprocket chuck

Manual hand unit: Nein J/N Automatic for single pieces: Ja J/N Automatic for frames: Nein J/N Clip set 351 on the loose item ------------------------------------ Manufacturer description: - Base frame in stable welded construction - Clip container as tipping conveyor with separation and feeding the clips - Screwdriver with tipping conveyor for the screws to be separated, feed screwdriver pneumatic with depth adjustment - Conveyor belt length approx. 4,000 mm as NC axis - Contact and clamping cylinder - Electro-pneumatic control via PLC It can programs with different Initial and distance dimensions can be entered - Workflow automatically in flow -------------------------------------- Technical specifications: - Screw height 50-120 mm - Profile length 350-3,500 mm - Table height approx. 950 mm -------------------------------------- Total price of the machine ex works: on request! Frei ...

Manufacturer: Homag aus Homag KF 20, Type: Ein und Ausgangskarten Streckensteuerung,

Manufacturer: Pilz Netzteil C-P-EA4 Ein und Ausgabegerät , Type: C-P-EA4, Model: 24 Entstörfilter, Serial number: 306176,

Manufacturer: NUM 1060 Telemecanique komplette Einheit mit Bildschirm, Type: 44BE, Serial number: 205202101/1453, Year: 2001, Hz: 50-60, Year :2001