ein used for sale

Lippert belt conveyor GF 1290-650-500 RA1392 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1290 mm Frame width (NB): approx. 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37  ...

Transnorm curved belt Conveyor 45° links 670-500 IR1100 RA1083 The Transnorm curved belt is from 2017. It is as good as new (used) and fully functional. It has an engine of the brand SEW. Columns are not included in the scope of delivery. These are optionally available. curved belts are often used in intralogistics for in-house transport of piece goods and are indispensable for modern distribution centers. Transnorm curved belts convince with performance and reliability. Long operating times are no problem thanks to a low-voltage drive over the entire belt width. Conical drums and a specially developed belt guidance system ensure maximum smooth running. Technical data: Manufacturer: Transnorm Type: TS 1600-105 FH2 curved belt 45° links Built: 2017 Condition: as good as new (used) Engine: fully functional Angle: 45° Running direction: left Inner radius (IR): 1100 mm Nominal/out ...

Siemens Dematic conveyor roller conveyor roller conveyors can be individually plannedRA1287We plan your individual conveyor system from second-hand goods! The Siemens Dematic roller conveyors are in good (used) condition. The roller conveyors are available in different versions, e.g. as:gravity conveyors - roller conveyors without driveRoller conveyors - roller conveyors and curves with driveTraffic conveyors with RSPN without RSPN (space brakes pneumatic)Available Cutting lengths (FL): 3000 mm, 2000 mm, 1500 mm, 1000 mmAvailable nominal/outer width (NB): 600 mm, 500 mm, 400 mmFollowing accessories is optionally available e.g.:Motors with and without frequency inverters of the brand SEW Eurodrive / Movimotsupports variably Side guidesFurther informationManufacturer: Siemens DematicType: Roller conveyorYear:unknownState:good (used) Roll width (RB):540 mm 440 mm 340 mmRoll clearance:625-12 ...

Transnorm Roller Curve Conveyor 45° links 565-500 IR 750 RA1283 The Transnorm roller curve is from 2004 and in a good (used) condition. It has a sEW mid-engine with brake. Supports are included in the scope of delivery. Technical data: Manufacturer: Transnorm Type: TS 2712 Roller curve 45° left Built: 2004 Condition: good (used) Engine: fully functional Angle: 45° Inner radius (IR): 750 mm Nominal/outer width (NB):565 mm Belt width (GB): 500 mm Engine Type: SEW Gear motor with brake Engine Power: kW 0.37/0.37/S1 Hz 50 A 2.15/1.24 Drive: Center drive Funding speed: 30 m/min Weight: 84 kg Scope of delivery: incl. 2 supports (height adjustable) Price: plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Features: Für eine individuelle, fachmännische Be ...

Gebhardt roller curve conveyor 90° right 610-550 with 2x straight piece RA1282 The Gebhardt roller curve is from 2007 and in a very good (used) condition. It has an engine of the brand SEW. Supports are included in the scope of delivery. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 014.15 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Length straight frame: 1 x 300 mm + 1 x 150 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.37 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 110kg Scope of delivery: with supports 670 mm total high Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Deliver ...

Gebhardt Powered roller conveyors roller conveyor 6000-610-550 RA1909 Make: Gebhardt Roller width (RB): 550 mm, Steel rolls Nominal/outer width (NB): 610 mm length: 600 mm Rolls diameter: 50 mm Roller distance 100 mm Overall height frame: 130 mm Drive: motor type W30DT71D4/IS Power: 0.37 kW Scope of delivery: without supports Optionally available: Supports Side guides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 6000 Nominal / outside width in mm: 610 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 2,00/1,15 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mai ...

Knapp roller conveyor accumulation roller conveyor 1050-660-600 RA1897 Make: Knapp Running direction: both directions Roller width (RB): 600 mm Nominal/outer width (NB): 660 mm Length: 1050 mm Roller diameter: 50 mm Roller distance: 75 mm Motor Roller conveyors: 2x Interroll EC300 24V Accumulating stations with light barriers and own drives: 2 Height frame: 90 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) scope of delivery: ohne Lichtschranken, without supports and side guides Driven: YES Roll width in mm: 600 Roll division in mm: 75 Conveying length in mm: 1050 nominal voltage: 24V Engine type: Interroll EC 300 Conveyor speed m / s: frei einstell ...

Roller Conveyor Gravity Roller Conveyor 2200-650-640 Omnidrive All Directions RA1988 Technical data: Type: omnidrive Roller conveyor Condition: good (used) Conveyor length (FL): 2200 mm Nominal/outer width (NB): 650 mm Usable width (NUB): 640 mm Height Side Profile: 80 mm Spacing: 75 mm in convoying direction and 100 mm between the wheels Stop: with handover roller Scope of delivery: without supports (if necessary please enquiries) Optional: supports Price: plus VAT from central warehouse Dr. Sonntag KG 97076 Wuerzburg Features: condition: good (used) Conveying length in mm: 2200 Nominal / outside width in mm: 650 Roll width in mm: 640 Roll division in mm: 75 / 100 Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wi ...

AMI pallet roller conveyor ARF89 KÜ 1477-1262-1050 RA2015 Pallet roller conveyor segment, continuous design length: 1477 mm Roller width (RB): 1050 mm, Steel rolls Nominal/outer width (NB): 1262 mm roller distance / pitch 160 mm (pitch 130mm on request, as on pictures) Overall height frame: 90 mm Totall height: 500 mm with stop on both sides for pallet weight up to 1000 kg From pallet racking to pallet flow racking - ideal for retrofitting existing racking systems Pallet racking support structure available on demand, please inquire The shown supports are included in delivery. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2003 condition: good (used) Conveying length in mm: 1477 Nominal / outside width in mm: 1262 Roll width in mm: 1050 Driven: NO scope of delivery: including supports without side guides Für eine individuel ...

AMI pallet roller conveyor ARF89 KÜ 1397-1262-1050 RA2014 Pallet roller conveyor segment, continuous design length: 1397 mm Roller width (RB): 1050 mm, Steel rolls Nominal/outer width (NB): 1262 mm roller distance / pitch 160 mm (pitch 130mm on request, as on pictures) Overall height frame: 90 mm Totall height: 500 mm with stop on both sides for pallet weight up to 1000 kg From pallet racking to pallet flow racking - ideal for retrofitting existing racking systems Pallet racking support structure available on demand, please inquire The shown supports are included in delivery. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2003 condition: good (used) Conveying length in mm: 1397 Nominal / outside width in mm: 1262 Roll width in mm: 1050 Driven: NO scope of delivery: including supports without side guides Für eine individuel ...

Data sheet of retrofit POS. GE 14.45 Gebhardt roller conveyor (without drive), FB = 550 mm, 3000 mm = FL Type: Gebhardt roller conveyor type 330.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: 14 kg/m = G Length: FL = 3000 mm Conveyor width: FB = 550 mm Overall width B = FB + 60: B = 610 mm Side profile: Aluminium Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Support: ask without support, if needed Condition: functional and visually good condition Features: Construction year: 2007 condition: very good (used) Conveying length in mm: 3000 Nominal / outside width in mm: 510 Roll width in mm: 450 Roll division in mm: 100 Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telef ...

Data sheet of retrofit POS. GE 20.25 Gebhardt roller conveyor (without drive), FB = 1,260 mm, 2000 mm = FL Type. Gebhardt roller conveyor type 330.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Net weight: 25 kg/m = G Length: FL = 2.000 mm Conveyor width: FB = 1.260 mm Overall width B = FB + 60: B = 1,320 mm Side profile: Aluminium Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Support: ask without support, if needed Condition: functional and visually good condition Features: Construction year: 2007 condition: good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 1320 Roll width in mm: 1260 Roll division in mm: 100 Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfa ...

Data sheet of retrofit POS. GE 10.10 Roller conveyors, FB = 550 mm Gebhardt, 7,000 mm = FL Type: Gebhardt roller conveyor type 310.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: G = 17.5 kg / m Length: FL = 7,000 mm Conveyor width: FB = 550 mm Overall width B = FB + 60: B = 610 mm Side profile: Aluminium Conveyor speed: v = 0,35 m/s Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Drive: motor type W30DT71D4/IS Power: 0.37 kW Speed: 42 Design/wave: M1 B, 20 x 40 Voltage: 230/400 V Power: 1.15 A Support: ask without support, if needed Condition: functional and visually good condition Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 7000 Nominal / outside width in mm: 610 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Amper ...

Data sheet of retrofit POS. GE 13.25 Roller conveyors, FB = 550 mm Gebhardt, FL = 2.000 mm Type: Gebhardt roller conveyor type 310.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: G = 17.5 kg / m Length: FL = 2.000 mm Conveyor width: FB = 550 mm Overall width B = FB + 60: B = 610 mm Side profile: Aluminium Conveyor speed: v = 0,35 m/s Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Drive: motor type W30DT71D4/IS Power: 0.37 kW Speed: 42 Design/wave: M1 B, 20 x 40 Voltage: 230/400 V Power: 1.15 A Support: ask without support, if needed Condition: functional and visually good condition Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 2000 Nominal / outside width in mm: 610 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Amper ...

Data sheet of retrofit POS. GE 40.40 Gebhardt roller conveyor (without drive), FB = 450 mm, 8.900 mm = FL Type: Gebhardt roller conveyor type 330.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: 14 kg/m = G Length: FL = 8.900 mm Conveyor width: FB = 450 mm Overall width B = FB + 60: B = 510 mm Side profile: Aluminium Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Support: ask without support, if needed Condition: functional and visually good condition Features: Construction year: 2007 condition: very good (used) Conveying length in mm: 8900 Nominal / outside width in mm: 510 Roll width in mm: 450 Roll division in mm: 100 Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach tel ...

Pallet roller conveyor segment 2550-888-800 RA1078 Pallet roller conveyor segment, continuous design length: 2550 mm Roller width (RB): 800 mm, Steel rolls Nominal/outer width (NB): 888 mm roller distance / pitch 160 mm (pitch 130mm on request, as on pictures) Overall height frame: 90 mm with stop on both sides for pallet weight up to 1000 kg From pallet racking to pallet flow racking - ideal for retrofitting existing racking systems Pallet racking support structure available on demand, please inquire For pallet width 800 mm and bay width 2700 mm 3 roller track segments are possible side by side The shown supports are NOT included in delivery. --> suitable supports or substructure on request Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) Conveying length in mm: 2550 Nominal / outside width in mm: 888 Roll width in mm: 800 ...

Budde roller conveyors, FB = 540 mm, FL = 1.850 mm Type: roller conveyors with vertical shaft on castors, swivelling round piece Weight: 135 kg Length: FL = 1.850 mm Conveyor width: FB = 540 mm Total width: 560 mm Support roller pitch: 75 mm Conveyor speed: v = 0.5 m/s Drive: SEW Power: 0.37 kW Voltage: 230/400 V Support: Including restraints swivel castors with Stoppers OK height role: + 850 mm Transport dimensions: L x W x H = 2000 x 700 x 850 Shipping weight: 135 kg Features: condition: very good (used) Conveying length in mm: 1850 Nominal / outside width in mm: 560 Roll width in mm: 540 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,5 scope of delivery: including supports with castors and brakes Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefon ...

Rolling curve 45° curve conveyor Conveyor angle: 45° Conveyor width: 500 mm Total width outside: 560 mm Role: slide stored with conical plastic molding Installed power: 0.18 kW constant conveyor speed: v = 0,3 m/sec. Support: ask without support, if needed Shipping weight: 70 kg on euro pallet Transportmasze: L x B x H = 850 x 800 x 500 mm Features: condition: very good (used) Nominal / inner radius in mm: 1030 Nominal / outside width in mm: 560 Roll width in mm: 500 angle: 45° Driven: YES KW: 0,18/S1 Conveyor speed m / s: 0,3 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. ...

Dematic roll curve 90° , curve conveyor Year of manufacture: 2007 Conveyor angle: 90° Conveyor width: 430 mm Total width outside: 500 mm Inner radius: 1270 mm Role: slide stored with conical plastic molding Support: ask without support, if needed Shipping weight: 100 kg on euro pallet Transportmasze: L x B x H = 1800 x 800 x 400 mm Features: Construction year: 2007 condition: very good (used) Nominal / inner radius in mm: 765 Nominal / outside width in mm: 500 Roll width in mm: 430 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,25/S1 Ampere: 1,19/0,68 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freu ...

Rolling curve 90° , conveyor curves Make: Transnorm Type: TS 2712 Year of construction: 1994 Conveyor angle: 90° Conveyor width: 700 mm Total width outside: 770 mm Role: slide stored with conical plastic molding Support: ask without support, if needed Shipping weight: 120 kg on euro pallet Transportmasze: L x B x H = 2200 x 800 x 400 mm Features: condition: very good (used) Nominal / inner radius in mm: 800 Nominal / outside width in mm: 770 Roll width in mm: 700 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 2,25/1,30 Conveyor speed m / s: 0,55 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. M ...

Gebhardt timing belt pusher straight + 90° right 200-550-100 Year of manufacture: 2007 Machine number: 1070.113 POS. 013.10 354.21 Max. Weight: 30 kg Design: built in 2 cars (parallel running, B = 610 mm) driven roller conveyor feeder railway L = 2, 0 m, optionally up to 10 m expandable Conveyor roller conveyor without drive L = 1, 70 m, on demand expandable with drive up to 5m conveyor width: 550 mm Excavation: 15 mm Conveyor speed: v = 0.35 m/sec. Support roller pitch: 100 mm Drive: Motor type WA20DT71D4BMG/IS Power: 0, 37kW Speed: 96 Design 7 shaft: hollow shaft 20 mm Voltage: 230/400 V Current: 1,25 A Transportzmasze: L x B x H = 2,05 x 1.70 x 0.70 m Weight: 230 kg Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 2000 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 1,25 Conveyor spe ...

Budde roller conveyors, FB = 540 mm, 2000 mm = FL Type: roller conveyors with vertical shaft Weight: 135 kg Length: FL = 2.000 mm Conveyor width: FB = 540 mm Total width: 560 mm Conveyor speed: v = 0.5 m/s Support roller pitch: 75 mm Drive: SEW Power: 0.37 kW Voltage: 230/400 V Support: Including restraints swivel castors with Stoppers Features: condition: very good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 560 Roll width in mm: 540 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,5 scope of delivery: including supports with castors and brakes Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit ...

Gebhardt roller curve conveyor 45° 610-550 with inclined inlet 45° RA1279 The Gebhardt roller curve is from 2007 and in a good (used) condition. It has an engine of the brand SEW. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 010.05.1 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 45° Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.35 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 45 kg Scope of delivery: without supports and side guide (if necessary please enquiries) Optional Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment  ...

Dematic roll curve 90° , curve conveyor Year of construction: 1999 Conveyor angle: 90° Conveyor width: 540 mm Total width outside: 600 mm Inner radius: 1370 mm Role: slide stored with conical plastic molding Support: Please ask without support, if needed Features: Construction year: 1999 condition: very good (used) Nominal / inner radius in mm: 1370 Nominal / outside width in mm: 600 Roll width in mm: 540 angle: 90° Driven: YES scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Datasheet Transnorm Roller Curve Conveyor 180° RIGHT 770-700 IR 800 RA1253 The Transnorm roller curve with side guides is from 1994 and in a good (used) condition. It has a mid-engine of the brand SEW with MOVIMOT inverter. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Transnorm Type: TS 2712 curved belt 180° RIGHT Built: 1994 Condition: good (used) Engine: fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 770 mm Clamping length: 700 mm Side guide: inside and outside Engine Type: SEW Gear Motor + MOVIMOT Inverter Engine Power: kW 0.37/0.075 S1 Hz 50 A 1.30 Drive: Center drive Conveyor speed: adjustable from 2 to 90 m/min Weight: 210 kg Scope of delivery: without supports (if necessary please enquiries)? Payment: after invoicing with advance payment Delivery time: a ...

Rolling curve 90° , conveyor curves Make: Schulz Conveyor angle: 90° Usable width: 490 mm Total width: 580 mm Inner radius: 780 mm Drive Center Conveyor speed: v = 0.30 m/s Role: Type: G6/50 sliding bearing with tapered plastic molding Optionally available: support Inrqduvum Transport dimensions: L x W x H = 1900 x 900 x 400 mm Shipping weight: 100 kg Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Conveyor curves Make: Transnorm Type: TS 2712 Year of construction: 2005 Order No. N124592 POS. 35 Conveying speed V = 0.58 m/sec Conveyor angle: 90° Conveyor width: 600 mm Total width outside: 680 mm Inner radius: 816 mm Drive Center Role: slide stored with conical plastic molding without posts Optional: inside Side-guide Shipping weight: 130 kg on euro pallet Transportmasze: L x B x H = 1800 x 900 x 450 mm Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Rolling curve 45° with a criminal Conveyor curves, drive Centre Make: Transnorm Type: TS 2712 Year of construction: 1995 Project A49993 POS. 665 Conveyor angle: 45° Width: 500 mm constant speed V = 0.78 m/sec Role: slide stored with conical plastic molding and metal rollers without posts Optional columns Shipping weight: 120 kg on euro pallet Transportmasze: L x B x H = 1800 x 700 x 400 mm Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Schulz roller curve 90° roller curve conveyor with driven straight section 450-390 IR1400 + 250-450-390 RA1186 Roll curve: Manufacturer: Schulz Angle: 90° Useful width: 390 mm Nominal/outer width: 450 mm Inner radius: 1400 mm Speed: v = 0.35 m/s Straight piece: Conveying length: 250 mm Useful width: 390 mm Nominal/outer width: 450 mm incl. lateral guides on both sides rollers: plain bearing with conical plastic moulding Transport dimensions: L x W x H = 1900 x 450 x 400 Transport weight: 100 kg Scope of delivery: without supports (if required, please inquire) Optional: Supports Features: Running direction: LEFT condition: very good (used) Nominal / inner radius in mm: 1400 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: 0,35 scope of delivery: without supports and side guides Für eine individuelle, fac ...

Conveyor belt angle: 90 width: 490 mm Total width: 530 mm Inner radius: IR = 1200 mm Conveyor speed: v = 0,33 m / s Rollers: plain bearing with conical plastic molding optionally available: 2 supports transport dimensions: L x W x H = 1800 x 700 x 400 transport weight: 60 kg Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Rolling curve 90° straight piece 830 mm Make: Transnorm Type: TS 2712 Year of construction: 2005 Project: N124592 Conveyor angle: 90° Width: 600 mm Outer width: 665 mm Inner radius: 800 mm Division of roles: straight piece 85 mm Curve 100 mm Speed.: 0.5 m/sec Optional: 3 supports Shipping weight: 120 kg on euro pallet Transport dimensions: L x W x H = 2800 x 700 x 500 mm Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Transnorm roller curve 2 x 90Â ° 670-600 IR816 + straight unit 900-670-600 RA1219 The Transnorm wheel curves with straight gear are from 2006 and in a good (used) condition. It has a central engine of the SEW brand. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Transnorm Type: TS 2712 Roller curve 2x90Â ° + straight frame Built: 2006 Condition: good (used) Engine: fully functional Angle: 90Â ° Inner radius (IR): 816 mm Nominal/outer width (NB): 670 mm Usable width (NUB): 600 mm Conveyor length straight section: 900 mm Motor Type: SEW three-phase motor Engine power: kW 0.55 S1 Hz 50 A 3.05 / 1.75 Funding speed: 0.7 m/sec Drive: Center drive Weight: 360 kg Scope of delivery: without supports (if necessary please enquiries) Optional: supports 70,00â ?¬ per piece Price: â ?¬ 3240,00 plus  ...

920 mm straight piece + 30° roles curve left as a combination Rolling curve: 30° serial link Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm Straight piece: Length: 920 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Drive: round curved belt + straight piece double-sided edge guide included 2 double support included Height role OK 800 +/-100 mm Features: Running direction: LEFT condition: very good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 30° Driven: YES scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir  ...

1,350 mm straight piece + 90° roller curve right as a combination Rolling curve: 90° right running Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1350 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece double-sided edge guide included Support: optional, 3 piece double support Height role OK 800 +/-100 mm Features: Running direction: RIGHT condition: very good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES KW: 0,25/S1 Conveyor speed m / s: 0,3 scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Ve ...

90° roller curve right Make: Dematic Direction: 90° right serial Width: 440 mm Nominal width (overall width incl. sidewalls): 500 mm Inner radius of the curve: 765 mm Guide on both sides including 2 support: optionally available Height role OK 800 +/-100 mm Features: Running direction: RIGHT condition: very good (used) Nominal / inner radius in mm: 765 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

TS 3115 - gravity roller curve Year 2018 new, unused without posts Width width: 400 mm Angle: 90° Inner radius: 800 mm Blue plastic rolls 19, 10 x 8 rolls + 9 x 9 rolls,. Rolls axle distance: 50 mm Division inside: 65 mm Division outside: 110 mm option 2 supports: OK rolls + 700 mm, height-adjustable available: 2 identical rolls curves. Features: Construction year: 2018 condition: new Nominal / inner radius in mm: 800 Roll width in mm: 400 angle: 90° Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intra ...

90° roller curve left + 880 mm straight piece as combination Make: Dematic Rolling curve: 90° link running Width: 440 mm Nominal width (overall width incl. sidewalls): 500 mm Inner radius of the curve: 765 mm Straight piece: Length: 880 mm Width: 440 mm Total width: 500 mm Roles, bright zinc-plated Scale: 70 mm Gearmotor: Make Franz Bangert optional Guide on both sides 3 support Height role OK 800 +/-100 mm Features: Running direction: LEFT condition: very good (used) Nominal / inner radius in mm: 765 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES Engine type: Franz Bangert Getriebemotor scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung  ...

90° roller curve left + 1.600 mm straight pieces with chains above slide as a combination Rolling curve: 90° linkslauf Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1,600 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm including 90° pull chains, chain clearance 450 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Guide: both sides included as shown Support: optional, 3 piece twin supports Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr ...

90° roller curve left + 1,875 mm straight piece as combination Rolling curve: 90° link running Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1,875 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Page management: optional Support: optionally available Height role OK 800 +/-100 mm Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Int ...

90° curve roller + 1,350 mm straight piece as combination Rolling curve: 90° right running Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1350 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Page management: optional Support: optional, 3 piece double support Features: Running direction: RIGHT condition: very good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,25/S1 Conveyor speed m / s: 0,3 scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontak ...

90° roller curve right + 650 mm straight pieces with chains above slide as a combination Rolling curve: 90° clockwise rotation Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 650 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm including 90° pull chains, chain clearance 450 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Siding: on both sides including Supports: 3 piece double support including Features: Running direction: RIGHT condition: very good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,25/S1 Conveyor speed m / s: 0,3 scope of delivery: including side guides without supports Für eine  ...

90° curve roller + 750 mm straight piece as combination Rolling curve: Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 750 mm Usable width: 400 mm Total width: 450 mm 10 rolls, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Siding: on both sides including Optionally available: 2 piece double supports Features: Running direction: RIGHT condition: very good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,25/S1 scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach tele ...

RA1187 Schulz roller cam 90° right 450-390 IR1570 + 2 x 250-450-390 Roller curve conveyor with 250 mm driven straight section at the beginning and end of the curve. Roll curve: Manufacturer: Schulz Useful width: 390 mm Nominal/outer width: 450 mm Inner radius: 1570 mm Speed: v = 0.33 m/s Straight piece: Conveying length: 2x 250 mm Useful width: 390 mm Nominal/outer width: 450 mm rollers: galvanized Pitch: 75 mm incl. lateral guides on both sides rollers: plain bearing with conical plastic moulding Transport dimensions: L x W x H = 2000 x 800 x 400 Transport weight: 120 kg Scope of delivery: without supports (if required, please inquire) Optional: Supports Features: Running direction: RIGHT condition: very good (used) Nominal / inner radius in mm: 1570 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES, Conveyor speed m / s: 0,33 scope of delivery: includin ...

Schulz roller curve 90° roller curve conveyor 450-390 IR1220 RA1185 Make: Schulz Angle: 90° Useful width: 390 mm Nominal/outer width: 450 mm Inner radius: 1220 mm Conveyor speed: v = 0.35 m/s incl. lateral guides on both sides Roll type: G6/50 plain bearing with conical plastic moulding Transport dimensions: L x W x H = 1600 x 550 x 600 Transport weight: 100 kg Scope of delivery: without supports (if required, please inquire) Optional: Supports Features: condition: very good (used) Nominal / inner radius in mm: 1220 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES Conveyor speed m / s: 0,35 scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihr ...

Roller conveyor 2750/2180-420-350 with chain drive RA2003 The roller conveyor with chain drive is in good condition (used) and fully functional. It has a Geared Motor of the SEW brand. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Condition: good (used) Conveyor length (FL): 2750/2180 mm Nominal width (NB): 420 mm (outer width) Roll width (RB): 350 mm Usable width (NUB): 355 mm Sidewalls: stainless steel Rolls: galvanized, d = 50 mm Roll division: 65 mm (distance) Engine: SEW Eurodrive with chain overshoot on drive chain Drive: Chain drive continuous chain guided via clamping device Power: 0.75 kW 3.7 A Scope of delivery: without supports and side guides (if necessary please enquiries) Optional: supports Side guide Availability: 3 identical tracks - individually customizable and combinable Price plus VAT from cen ...

Transnorm Roller Conveyor / Gravity Roller Conveyor 2140-700-600-40 RA1781 Transnorm\s gravity roller conveyor has a two-sided side guide and a transfer roller on the stop. It is supplied without supports. These are available as an option. Gravity roller conveyors are a common alternative or complement to driven conveyor technology in the field of intralogistics. The fields of application are manifold. Roller conveyors in the shipping and picking area, shelving and loading zones are commonly used, either as a slope or a sliding track. Use gravity and save energy! The advantages are obvious, cost-effective, low-maintenance and durable. In addition, there is a low installation effort and low-noise operation. Technical data: Manufacturer: Transnorm Type: Roller conveyor Built: 2009 Condition: very good (used) Conveyor length (FL): 2140 mm Nominal/outer width (NB): 700 mm Usable widt ...

Manufacturer: Kuhnke Steuerung, FREE TEXT: mit CPU Karte, Free text 1: mit RAM Karte, Free text 2: inkl Einsteckmodule,

Manufacturer: Homag , Type: KAL 310/8/A20/S2, Year: 2005, Control: PC 22, Work piece width min-max mm: min 55/100, Min.-max. workpiece height in mm: 12 - 60, Min-max feed m/min: 18 - 24, Einlauflineal gesteuert: yes, Premilling: 2 x 3kW, Application of separation agent: yes, Coil magazine: 2, Mitre stations: Fase / Gerade, Pre-milling: 2 x 1,5 kW, Bevel milling: FK 13 - 8Fach, radius milling: 4 kW, Corner tracing type: MN 21, Flat scraper: FA 11, Bonding part EVA: A 20, Top pressure belt/roller: Band, Work piece refeeding: vorinstalliert, FREE TEXT: Frreiplatz, Year :2005

Manufacturer: Bürkle, Type: TRUV, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 120, Number of lamps: 1, kW power 1 lamp: ca.10, Lampen gerade eingebaut: yes, Power per lamp watt UV: 120, od distance mm: 120, Feedin speed m/min: 5-25, Year :2002

Manufacturer: Meinert Arbeitsplattenlage, Year: 1995, Control: Ferrocontrol, Storage program: yes, Lagerabmessung Meter: ca.35 X 6, Plattenstärken min-max mm: 10-55, Plattenlängen min-max mm: 2070, Plattenbreite min-max mm: 1200, Beschichtet Platten: yes, Dünnplatten bis mm: no, Einlagerplätze: 1, Auslagerplätze: 1, Min-max stack dimensions length: ca.4500 X 1400, Transport roller conveyor: 1, Span length mm: 6000, Fahrträgerhöhe mm: 3800, Drehvorrichtung Hubsytem : yes, Hight of stacks max mm: 1400, Weight measurement: 150, Feeding speed max m/min: yes, Feeding speed continous adjustable: yes, Year :1995