eigenbau used for sale

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Eigenbau, Control: hand, Work piece width min-max mm: 480, Min.-max. workpiece height in mm: 10-80, Milling spindles vertical: yes, Milling engine 1 hours power: 0,75, FREE TEXT: Bohrgerät für Halogen Bohrungen<CRLF>die Kabelzuführung muss mit einer separaten Bohrmaschine von vorne<CRLF>gebohrt werden, über die angeflanschte Bohrbrille.<CRLF>,

Gross volume approx. 18 litres, net volume approx. 12 litres Mixer shaft heatable and coolable Double jacket heatable and coolable Product-contacted parts: stainless steel VA Drive is carried out by chain drive and gearmotor Subject to prior sale - Errors possible

Grinding machine • For grinding curves and internal radii

Two-decker sieve 1200 x 2500mm with water spraying Scoop wheel with 2m diameter new steel structure, operating platform with ascents Capacity: up to 50 t/h

container volume: 600 l internal dimension: 1500 x 740 x 780 mm dimensions of the machine ca.: 1900 x 810 x 860 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

container volume: 600 l internal dimension: 1500 x 740 x 780 mm dimensions of the machine ca.: 1900 x 810 x 860 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Workbench, work table, assembly bench -Width: 1000 mm -Depth: 800 mm -Height: 800 mm -Weight: 110 kg

: 1950 mm : 950 mm : 400 mm : 4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working widths: Eingangsbreite 400 mm Clouth speed: 20 m/min Fabric content: 50 m air pressure - required: 6 bar voltage: 380 V / 50 Hz Crushing-machine for getting crush-effects in warp-direction. The cloth is feeded into a funnel by a setting unit. The pneumatical controlled plunger puts the fabrics into the guide tube vertically and horizontally. The fabrics will be pushed into the hose which is slipped over the guide tube and then pressed. Afterwards the closed hose will be treated by saturated steam. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Continuous mixer in stainless steel As good as new Motor drive 7.5 KW Capacity up to 15 t/h Liquid addition up to 3%

: . : . : . dismantled: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight of the machine ca.:620 kg dimensions of the machine ca.:1000 x 920 x 1550 mm

Tool Grinding Machine Twist Drill Pointing Machine Make EIGENBAUExternal dimensions W x D x H: 600 x 650 x 1500 mmlargest grinding wheel diameter: 200 mmThe machine has been prepared to tip out twist drills with MK2 shank.usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure: 10 t distance between columns: 425 mm dayligth: 380 mm spindle diameter: 50 mm weight of the machine ca.: 200 kg dimensions of the machine ca.: 1,3 x 0,8 x 2 m Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deburring machine, hole deburrer, bore deburrer, deburring device -Drive: 0.30 kW -Countersink -Speed: 585 rpm -Dimensions: 500/300/H460 mm -Weight: 31 kg

Bushing drilling machine, row drilling machine -Support table: 2200 mm -mobile -Stops: adjustable -Dimensions: 2300/600/H1350 mm -Weight: 240 kg

Profile bender, bender, angle bender, tube bender, ring bender -Manufacturer: self-made -Motor: 0.25 kW/20 rpm -Rollers: Ø 177/116 x 70 mm -Roller spacing: 145mm -Dimensions: 660/510/H1670 mm -Weight: 186 kg

Polishing bench grinder, grinding machine, polishing bench, double bench grinder, bench grinder, column grinder, column grinder -Drive: 2.2 kW -Speed: 1420 rpm -polishing discs: max. mm -Assembled brush: 150 mm -Dimensions: 700/800/H1300 mm -Weight: 73 kg

diameter range 8 mm shaft length under head 60 mm output pieces/min 100

max. coil diameter 700 mm carrying weight 150 kg

Coil width max. 1,250 mm

wheel diameter: 240 mm turning speeds: 2500 U/min turning speeds: 1600 U/min chuck diameter: 160 mm table-size: 300x260 mm centre height: 120 mm total power requirement: 0,55 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 0,8x0,8x1,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 0 bar liter capacity: 0 l power capacity: 4 kW operating pressure: 150 bar : weight of the machine ca.: 200 t dimensions of the machine ca.: 1,1 x 0,7 x 1,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic double acting pipe pulling and reducing machine Fabr. OWN CONSTRUCTIONFor connection of outer and inner tubeConsisting of:1.) Vertical hydraulic double acting pressxa0xa0xa0xa0xa0 Table size: 565 x 450 mmxa0xa0xa0xa0xa0 Installation height: 800 mmxa0xa0xa0xa0xa0 Distance between the stands: 700 mmxa0xa0xa0xa0xa0 lateral. Passage: 285 x 200 mmxa0xa0xa0xa0xa0 Piston diameter: 90 mmxa0xa0xa0xa0xa0 External dimensions: 1400 x 650 x 2100 mmwith separate hydraulics2.) Horizontal hydraulic double-acting pressxa0xa0xa0xa0xa0 Power: 450 atmxa0xa0xa0xa0xa0 Installation height: 800 mmxa0xa0xa0xa0xa0 Cylinder diameter: 100 mmxa0xa0xa0xa0xa0 External dimensions: 2400 x 1500 x 1200/3000 mmwith attached crane jib and STEEL chain hoist 600 kg3.) large lot of tools (about 30 pieces)xa0xa0xa0xa0 from 21.3 to 407 mmxa0xa0xa0xa0xa0 with intermediate sizes of 50, 57, 60, 60.3 mmusedPrice on request ...

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer diameter: 210 mm above -Outer diameter: 220mm under -Number: 2 sets of milling cutters -Price: complete -Weight: 16 kg

2 Stueck hand lever fraesmachines brand EIGENBAU