ehp used for sale

It is in good condition. it was only used 3 months a year. if you need more details, contact us.

Key data: 200 t, 3100 mm, 2550 mm

Darley EHP 200 Press Brake Manufacturer: Darley Type: EHP 200 31/25 Year of manufacture: 1990 Control System: Delem Technical Specifications Effective length: 3100 mm Capacity: 200 t Distance between columns: 2550 mm Main motor power: 15 kW Dimensions: approx. L 3.3 x W 1.7 x H 2.5 m Weight: approx. 9 t Accessories Documentation for the machine A set of tools

CNC press brake make DARLEY type EHP 50-25 / 20Machine -No: 12940 Year 1988Max. Press force: 50 tNumber of cylinders: 2Working length: 2550 mmPassage between the uprights: 2050 mmlateral. Discharge: 250 mmTable width: 100 mmLowering speed: 100 mm / sec.Working speed: 13.5 mm / sec.Retraction speed: 75 mm / sec.Drive power: 5.5 kWWeight approx: 3.6 tOutside dimensions approx: 2750 x 1100 x 2050 mmWith- 1 cpl. upper tool- 1 cpl. lower tool- hydr. Clamping the upper tool- CNC control DELEM DA 42 X / Y- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC press brake make DARLEY type EHP 200/43/37Year of construction 1989Max. Pressure force: 200 tMax. Working length: 4300 mmNumber of cylinders: 2Stroke: 225 mmPassage between the stands: 3700 mmlateral. Discharge: 300 mmLowering speed: 80 mm / secPress speed: 8.5 mm / secRetraction speed: 50 mm / secDrive power: 15 kWDimensions L x W x H: 4420 x 1680 x 2800 mmWeight approx: 18 tWith- CNC control DELEM DA 42- 2 axes controlled X, Y- shared universal die- to U-rail- Sharp pointed tool- Rehfoot tool shared- Footswitchused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC press brake make DARLEY type EHP 110 31/25Year of construction 1990Press force: 110 tWorking length: 3100 mmPassage between the uprights: 2550 mmStroke length: 150 mmLowering speed: 100 mm / sec.Max. Press speed: 8.0 mm / sec.Retraction speed: 65 mm / sec.Drive power: 7.5 kWWeight approx: 8700 kgOutside dimensions approx: 3220 x 1290 x 2440 mmWith- CNC control Delem DA 22- Bombing device- universal die- Split goat foot tool- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure boosting cylinders -Hydraulic cylinder: from press brake EHT type EHP 11-40 -Piston rod: Ø 155 mm -Stroke: 250 mm -Number: 2x cylinders available, 1x left / 1x right -Price per piece -Dimensions .: 855/285/380 mm -Weight: 311 kg / pc.

Stop for press brake, edging bench, guillotine shears, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40 2 pieces -Length: 515 mm -Socket: Ø 25 mm -Price: complete -Dimension: Ø 50 x 515 mm -Weight 5.1 kg / pc.

Hydraulic press brake prod. by Darley Holland, type EHP 50 25/20 rb. 1986. Pressure 50 t, working length 2500 mm, Between sides 2650 mm. Loading depth 250 mm. Stroke 150 mm. CNC Delem DA42 control, controlled axes; Y1-Y2-X. Installed power 5.5 kW, machine weight 4000 kg. Full technical documentation DTR, safety instruction in Polish.

Hydraulic press brake prod. by Darley Holland, type EHP 150.36/31 rb. 1996. Pressure 150 t, working length 3600 mm, Between sides 3150 mm. Loading 350 mm. Stroke 240 mm. CNC Delem DA58 control, controlled axes; Y1-Y2-X-R. CNC table deflection arrow compensation. Stamp mounting - Wila. Multi-groove die 110x110 mm with the largest groove V=90 mm. Installed power 12,7 kW, machine weight 12000 kg. Simple and powerful press brake for heavy processing-bending of thick metal sheets in 3 shifts. Full technical documentation DTR, safety instructions in Polish.

Used horizontal pearl mill Oliver Battle model Supermill EHP-50. The stainless steel grinding chamber is equipped with a duplication and has a volume of about 51 liters. The shaft is equipped (13) with grinding discs and is driven via el. motor 36 kW, 1480 rpm, 50 Hz, peripheral speed 10 and 15 m / s (according to the processed product). Separation of grist (balls) using a sieve. It includes an integrated control panel and switchboard with power elements, as well as a pump with a flow rate of 0-923 l / h, which is driven by el. motor 0.75 kW, 230/400 V, 1400 rpm, 50 Hz.

Description: SPECIFICATIONS Character: Geuma Type: EHP-1000 Year of construction: 1999 Capacity: 100 T Distance between columns: 1,300 mm Slag: 700 mm Motor power: 11 kW Tilting: 90 ° Machine dimensions (lxwxh): 5,000 x 2,500 x 1,400 mm Machine weight: 8,000 kg Approx. Onsite Dimension. (l x w x h): 5,000 x 2,500 x 1,400 mm, weight approx.: 8,000 kg

Force of pressure: 150 t working width: 4500 mm clear stand width: 3050 mm stand projection: 300 mm rear gauge: 1000 mm Electr. Supply: 380 V, 18.5 kW weight: 14.8 t space: 4200 x 2000 x 3000/3150 mm

Force of pressure: 250 t working width: 3550 mm clear stand width: 3050 mm stand projection: 300 mm rear gauge: Yes Electr. Supply: 400 V, approx. 26 kW weight: 20 t space: 2100 x 3800 x 3100 mm

pressure: 150 t chamfer lenght: 3550 mm distance between columns: 3050 mm Control: Cybelec DNC 880S stroke: 700 mm throat: 350 mm weight of the machine ca.: ca. 15.000 kg height of the machine: 3.900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1500 kN chamfer lenght: 3550 mm distance between columns: 3044 mm Control: Cybelec 34 PS-CN column arm: 350 mm max. ram stroke: 220 mm dimensions of the machine ca.: 3200 x 4200 x 2100 m sheet support: hinten / back number of support arms: 2, verschiebbar / adjust. die shift: hydraulical tool clamping: upper tool quick change system: crown: 3 sets of tools included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 t chamfer lenght: 7250 mm distance between columns: 6550 mm Control: throat: 400 mm ram - range of adjustment: 270 mm stroke: 270 mm table surface area: 7250x400 mm dayligth: 560 mm fence: 5-1000 ja /nein total power requirement: kW weight of the machine ca.: 53 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: -maximum working length 1250 mm -Stand round 1050 mm -Max pressing force 80 t -Stroke 250 mm -Stand RADIUS 300 mm -Max height betw. Table - press bar 560 mm -Lifting speeds -Backward speed idle max 100 mm / sec. -Forward speed 100 mm / sec. -Backward press speed max. 12 mm / sec. -Total power 15 kW -Space requirement approx. B 1750 x H 3400 X 2000 mm -Weight approx. 8500 kg -with: - CNC - control CYBELEC DNC 7400 PSGY -controlled X - axis back gauge 5-1000 mm -Pneum. Z - axis in three stages. height-adjustable -manually movable and foldable stop fingers -controlled pneumatic die shift - hydr. Tool clamping -Manual crowning - 2 piece support arms -Pointed tool shared H 320 x L 1000 mm -Foot tool H 320 mm x L 1000 mm - universal matrix L 1000 mm

pressure: 200 t chamfer lenght: 6050 mm distance between columns: 5500 mm Control: Cybelec type: ModEva 12 S total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t chamfer lenght: 4050 mm distance between columns: 3550 mm Control: CYBELEC ModEva Pac throat: 350 mm distance between table / ram: 430 mm table width: 250 mm stroke: 250 mm total power requirement: 18,5 kW weight of the machine ca.: 16500 kg dimensions of the machine ca.: 4400x2100x3200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t chamfer lenght: 4050 mm distance between columns: 3050 mm column arm: 350 mm dayligth: 430 mm piston stroke: 220 mm table width: 300 mm oil volume: 390 ltr. pressure: 265 bar total power requirement: 18,5 kW weight of the machine ca.: 13.000 kg range L-W-H: 4900 x 2250 x 3200 mm from a maintenance workshop Furnishing: - CYBELEC CNC control, model DNC 30 - Swivel control, right front - controlled axes Y1 + Y2 + X + R - CNC motorized table crowning - hydraulic upper tool clamping - Pneumatic lower tool clamping - 2x front pneumatic bending aids - 2x free-moving 2 hand controls/foot controls - lateral protective device (protective grille) - rear protective device (protective grille) - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3100 x 110t.

pressure: 110 t chamfer lenght: 2550 mm quantity of oil: 390 l The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Delem CNC control (DA65w) Y1, Y2, X and R axis CNC controlled CNC crowning Hydraulic WILA NS top clamping Laser system front (bridged) 1 set of complete tools incl.

CNC press brake Manufacturer EHT Type EHPS 20-35 Year of construction 1995 Control DNC800 Bending length 3550mm pressing pressure 200t Block matrices and segments are also available Documentation and operating instructions available Machine was overhauled 3 years ago and put aside. No longer energized.

Capacity 4300 x 230 tons Delem DA 66W CNC control CNC Bombing Y1, Y2, X1, X2, R1, R2, Z1 and Z2 axis CNC controlled Hydraulic Wila New Standard top and bottom clamping

This EHT EHPS 25-30 Bending machine was manufactured in the year 1991. The machine has a pressing force of 2500 kN.

Working length: 4300mm, pressing force: 2000kN, connected load: 15kW, weight: 18t, including tools.

Working length: 3050mm, pressing force: 2500kN, number of operational hours unknown, including set of tools and documentation, on-site inspection is possible.

pressure: 200 t chamfer lenght: 3050 mm distance between columns: 2550 mm throat: 300 mm stroke: 350 mm ajustment speed: 80,0 mm/sec working feed: 10,0 mm/sec return speed: 58,0 mm/sec dayligth: 450 mm table width: 300 mm work height max.: 1140 mm control: DNC 60 oil volume: 180 ltr. total power requirement: 18,5 kW weight of the machine ca.: 15.500 kg. range L-W-H: 4200 x 2200 x 3200 mm Ausstattung: - elektro-hydraulische CNC Abkantpresse letzte Pressenprüfung - durchgeführt 2022 - CYBELEC CNC Steuerung - Modell DNC 60 PS (Umbau 2012) - schwenkbare Bedienung, Anbauseite vorne rechts - elektrischer Hinteranschlag, mit Kugelumlaufspindeln (X Achse) - elektrisch-pneumatische Höhenverstellung vom Hinteranschlag (R Achse) - manuelle Matrizenverschiebung, inkl. Matrizenschuh - elektro-hydraulische Oberwerkzeugklemmung - elektro-pneumatische Unterwerkzeugklemmung - EHT - geteilte Oberwerkz ...

pressure: 150 t chamfer lenght: 4050 mm distance between columns: 3050 mm column arm: 350 mm dayligth: 430 mm piston stroke: 220 mm table width: 300 mm oil volume: 390 ltr. pressure: 265 bar total power requirement: 18,5 kW weight of the machine ca.: 13.000 kg range L-W-H: 4900 x 2740(1890) x 3310 mm from a maintenance workshop Furnishing: - CYBELEC CNC control, model DNC 30 - Swivel control, right front - controlled axes Y1 + Y2 + X + R - CNC motorized table crowning - hydraulic upper tool clamping - Pneumatic lower tool clamping - 2x front pneumatic bending aids - 2x free-moving 2 hand controls/foot controls - lateral protective device (protective grille) - rear protective device (protective grille) - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 t chamfer lenght: 3200 mm distance between columns: 2740 mm stroke: 400 mm Center of spindle to wall or column: 420 mm dayligth: 650 mm engine output: 32,5 kW oil volume: 350 l Control: total power requirement: kW weight of the machine ca.: 20 t dimensions of the machine ca.: 4,75 x 2,80 x 3,60 m Only 5406.9 operating hours read • Delem DA-65W control • LazerSafe light barrier • Controlled axes: Y1, Y2, X, X1 (oblique), Z1, Z2 • 2 x support arms with parking position on the side • CNC controlled crowning • Hydraulic tool clamping at top + bottom • Extensive tool set, with very large dies for machines / steel construction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 80 t, 3050 mm

Pressing force 800 kN Bending length 3050 mm Plunger stroke approx. 160 mm Installation height up to 340 mm Dimensions LxWxH: 3750 x 1600 x 2850 mm Weight approx. 7500 kg including tools (see photos)

Pressure 110 t, working length 3100 mm, between sides 2650 mm. Loading depth 250 mm. Stroke 150 mm. Delem DA42 CNC control, controlled axes; Y1-Y2-X+ hydraulic tool clamping Installed power 7.5 kW, machine weight 7000 kg. Full technical documentation, OHS manual in Polish.

The machine is in good technical condition, inspection possible upon agreement. Specifications: Max. bending length 4300 mm Distance between columns 3700 mm Max. pressing force 300 T Dis. Beam - Table 485 mm Beam stroke 300 mm. Dimensions (Estimate) Length 5200 mm Width 2200 mm Height 3600 mm Weight 21500 kg

Manufacturer: Olaer Parts: Euro-Hydro - Brook Compton 3 Phase Cooler Matrix Maximum Static working pressure: 21BAR Maximum dynamic working pressure: 14 BAR (Tested according to ISO/DIS 10771-1 Heat transfer allowance: +-6% Maximum fluid temperature in the cooler matrix: 120 Celsius degrees Maximum Cooling capacity: 160kW Fluid compatibility Mineral oil: HL/HLP Oil/water emulsion: HFA/HFB Water Glycol: HFC Phosfatester: HFD-R Material Cooler matrix: Aluminium Fan housing: Steel Fan blades/hub: Glass fibre reinforced polypropylene/aluminium Fan guard: Steel Other parts: Steel Surface treatment: Electrostatic powder coated 3Phase Motor Insulation class: F Rise of temperature: B Protection class: IP55 1Phase Motor Insulation class: B Rise of temperature: B Protection class: IP 44 3Phase Motor LAC 004 Rated voltage: 230/400 50/60 Hz Insulation class: ...

pressure: 50,0 t chamfer lenght: 2050 mm distance between columns: 1550 mm dayligth: 320 mm stroke: 120 mm ajustment speed: 100 mm/sec working feed: 10,0 mm/sec return speed: 75,0 mm/sec column arm: 250 mm work height max.: 900 mm table width: 100 mm connected load: 7,2 kW oil volume: 90 ltr. weight: 2600 kg range L-W-H: 2250 x 1100 x 2050 mm Furnishing: - DELEM CNC control model DA 24e - swiveling control panel - electrical backgauge (X axis) - 2x manually adjustable stop fingers lateral + vertical adjustment (R + Z axis) - 2x front support arms - SICK light barrier in front - 2 hand / foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 150 t, 3600 mm, 3100 mm

Capacity: 150 ton Bending length: 3,600 mm Stand width: 3,100 mm Back gauge: 600 mm Stroke length: 240 mm Projection: 400 mm Controls: Delem 52 Equipped with: - 1 set of bending tools - Hand/foot control Country of origin: Netherlands Motor power: 11 kW Machine LxWxH: 3750 x 1500 x 2900 mm Machine weight: 14.500 kg

pressure: 110 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 250 mm dayligth: 375 mm stroke: 150 mm ajustment speed: 100 mm/sec working feed: 8.0 mm/sec return speed: 65.0 mm/sec table width: 160 mm work height max.: 900 mm oil volume: 130 ltr. total power requirement: 7.5 kW weight of the machine ca.: 8700 kg range L-W-H: 3220 x 1290 x 2550 mm well maintained / good condition () Furnishing: - electro-hydraulic CNC press brake - DELEM CNC control - model DA 58 Swivel control panel, front left 2D graphical programming & product display Tool & program library - CNC axis adjustment Y1 - Y2 - X axis - CNC electro-motorized back gauge incl. 2x manually adjustable stop fingers (R+Z axis) - manual table cambering, adjustment via hand crank including analogue value display - 1x split pointed upper tool (manufacturer UKB) - 1x universal rotating Multi-V die block i ...

Description: CNC press brake folding long 4300 mm between steander 3700 mm max. pressure 300 tons Power 33.5 kW stroke 300 mm Projection upright 400 mm DELEM DA-65W control system CNC crowning Hydraulic tool clamping no tools weight approx.: 21,500 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 2,200 x 3,600 mm

fabric-no.: 202 395 working length: 2550 mm output: 2000 KN tracking travel: 13 mm safety distance: 176 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Year of construction 1989 Pressure 150 t Bending length 4050 mm Stand width 3050 mm Stand projection 350 mm Installation height 430 mm Piston stroke 220 mm Table width 300 mm Oil content 390 liters Pressure output 265 bar Total power requirement 18.5 kW weight approx.: 13,000 kg, Approx. Onsite Dimension. (l x w x h): 4,900 x 2,740 x 3,310 mm

Capacity: 340 t Folding length: 4300 mm CNC Brand: Delem CNC Model: DA 24 E Make Darley EHP 34 Type EHP 340 43/31 Year 1996 CNC Abkantpresse Pressbrake kantbank plooibank Capacity (metric tons) Force = 340 T Folding length (mm) L = 4.300 Down stroke or Up stroke H = 3.100 Tandem type DELEM DA 24 E Y1/Y2/X/R1/R2/V Crowning Under power by client !  

Capacity: 50 t Folding length: 2550 mm CNC Brand: Delem CNC Model: DA 65 Make Darley CNC 50 T Type EHP 2550 / 50 Year 1997 Darley ehp kantbank with Delem DA 65 abkantpresse Capacity (metric tons) 50 Folding length (mm) 2550 Down stroke or Up stroke boven Tandem type singel Troath = 400 Stroke = 150 Die height = 435 CNC Delem DA 65 Darley kantbank Darley Pressbrake Darley Abkantpresse  

Capacity: 80 t Folding length: 2550 mm CNC Brand: Delem CNC Model: DA 23 MACH-id     5558 MAKE          Darley Holland          TYPE            EHP 80 25/20 YOP              1991 SPECIFICATIONS Max. bending length         2550 mm Distance between column       2050 mm Max. pressing force        80 T Dis. Beam - Table           410 mm Beam stroke                     225 mm Table Width                      160 mm Troth beam                       400 mm Approch speed    ...

Capacity: 150 t Folding length: 3100 mm CNC Brand: Delem CNC Model: DA 56 MACH-id     5081 MAKE          Darley Holland TYPE            EHP - L YOP              2000 SPECIFICATIONS Throat      250 mm Controll     Delem DA 56 Pressbrake / Folding / Mech. / Hydr.      Hydraulic Pressbrake Hydraulic / Mechanical        Hydraulic Bending length       3100 mm Distance between column       2500 mm Press force      150 Ton Stroke        175 mm Die height        400 mm Backgauge stroke X in mm       1000 mm Power        14 Kw DIMENSIONS  Length    ...

Capacity: 110 t Folding length: 3100 mm CNC Brand: Delem CNC Model: DA 56 MACH-id    5080 MAKE        Darley Holland TYPE          EHP - L YOP            2000 SPECIFICATIONS Throat      250 mm Controll     Delem DA 56 Pressbrake / Folding / Mech. / Hydr.      Hydraulic Pressbrake Hydraulic / Mechanical         Hydraulic Bending length         3100 mm Distance between column        2500 mm Press force        110 Ton Stroke          150 mm Die height       375 mm Backgauge stroke  X  in mm     1000 mm Power         7.5 Kw DIMENSIONS Length  ...

Capacity: 150 t Folding length: 4300 mm CNC Brand: Delem CNC Model: DA 23 MACH-id    5019 MAKE         Darley Holland TYPE           EHP 150 43 /37 YOP              1993 SPECIFICATIONS Controll        Delem DA 23 Pressbrake / Folding / Mech. / Hydr.       Pressbrake Hydraulic / Mechanical         Hydraulic Bending length      4300 mm Distance between column       3700 mm Press force      150 Ton Throat     300 mm Stroke         175 mm Die height         400 mm Backgauge stroke  X in mm      1000 mm Number off controlled axis         4  ...

Capacity: 50 t Folding length: 1550 mm CNC Brand: Delem CNC Model: DA 66 W MACH-id     4471 MAKE         Darley TYPE          EHP LS 50 . 15 CL YEAR         2010 SPECIFICATIONS Controll        Delem DA 66 W Pressbrake / Folding / Mech. / Hydr.     Pressbrake Hydraulic / Mechanical         Hydraulic Bending length          1550 mm Distance between column         1250 mm Press force         50 Ton Throat          400 mm Stroke           225 mm Die height       410 mm Backgauge stroke       X in mm       1000 mm Number off co ...

Capacity: 340 t Folding length: 6200 mm CNC Brand: Delem CNC Model: DA 42 MACH-id   3446 MAKE   Darley Holland TYPE   EHP 340 / 62/51 YEAR   1989 SPECIFICATIONS   Controll   Delem DA 42 Pressbrake / Folding / Mech. / Hydr.  Pressbrake   Hydraulic / Mechanical   Hydraulic Bending length   6200 mm Distance between column   5100 mm Press force   340 Ton Throat   350 mm Stroke   250 mm Die height   500 mm Backgauge stroke X in mm  1000 ? mm Number off controlled axis   4 Power 33.5 kW DIMENSIONS   Length   6400 mm Width   2075 mm Height   3680 + 1470 Ground mm