edge used for sale

Kantenanleimmaschine - Edge Gluing Machine Traenklein KAM 60 Working width max. 60mm Kaltleim / Cold Glue system -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Kantenanleimmaschine - Edge Gluing Machine Jagenberg KAM 60 Serial-No. 12.30124/11 Working width max. 60mm Kaltleim / Cold Glue system Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Edge banding machine, manufacturer Holzher, type Streamer 1057XL C, year of manufacture 2022, max. working length approx. 4,000 mm, with integrated scraper unit, radius scraper ZK 301, surface scraper FK 701, buffing unit 1940, spraying device front and rear TR201, extendable workpiece support 600 mm, extraction line to the first slider, operating hours 15 (read)

Volpato LBK 200 3P edge grinder 2.5kw main motor Two-speed sanding belt Mechanical sanding belt oscillation Sanding belt height 200mm Sanding belt length 2640mm Grinder table at 0 – 35 angle Electric lifting and lowering of the sanding unit Additional attachment for curvilinear elements CE Certified

CEHISA BRYKO EDGE BANDING MACHINE Glue tank Clipping the back of the front of the ball Milling up and down milling cutters Compact dimensions - length 1900mm

OTT Pacific V12-F PLUS PLC Comp. Control LCD display Pre-milling unit immersion-controlled Full car. Roller and edge magazine High-speed gluing station / overhead Double roller top pressure with electr. Positioning Auto. Inlet ruler Flush caps pneum. 0-3° Flush milling/bevel milling 15/30/45° - 12 mm Radius milling R-2, R-5 Corner rounds Radius Scraper Blade Surface scraper blade Soundproof booth with room extraction Machine from a small business with very few linear meters in TOP CONDITION

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor, electric motor -Power: 1.5 kW 12000 rpm at 200 Hz -Holding shaft: Ø 16 mm -Dimensions: 380/75/H160 mm -Weight: 8kg

Edge sanding machine Make: Kündig Model: Basiq Year of construction: 2015

Gebr. Edge sanding machine Wild + Gap NFSB1 Motor power: 2.6 / 3.2 kW (2 speeds) Table size: 30 x 100 cm Table adjustment height + depth by handwheel Swivel grinding unit Veneer grinding device Support table for radius grinding (diameter roller: 100 mm) Sanding belt height: up to 200 mm Suction connection: 140 mm Feed console incl. various sandpaper Dimensions: L: 180 cm W: 95 cm H: 120 cm Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

Edge Sanding Machine Belt Sander SCHMID Height-adjustable support table Support table can be tilted Additional support table on the deflection roller for contour grinding. Integrated extraction fan incl. receptacle device for feed. suitable feeds can be found in my other articles. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline, depending on the distance and unloading option, they may vary.

Code: 0241 Brand: HOLZHER Model: 1402 MF - CE Standard Automatic edgebander for wood, furniture, veneer, Abs, melamine, PVC, solid wood, and other materials - CE Standard Technical data: Edge thickness mm 0,3 - 3 Max panel height mm 45 Min panel length mm 180 Min panel width mm 60 Glue loader Double end cutter: N° 2 motors 0,22 Kw - Rpm 9000 Tilting trimmers: N° 2 motors 0,6 Kw - Rpm 18000 Brush unit: N°2 motors Kw 0,15 - Brush diameter mm 150 Protection cabin Compressed air Bar 6 Overall dimensions mm 3250 x 1220 x 1200 h Weight kg 680

Code: 0772 Brand: DE STEFANI Model: MVT 1000 Edge sander with 1 group for flat and shaped edges, solid wood edges, Mdf, veneered, melamine paper covered, varnished, for furniture, doors, panels, etc. Technical data: Tilting sanding group suitable to sand rough or finished mouldings with pad for flat and shaped surfaces 2 speed motor rpm 660/1450 Max working height mm 100 - Adjustment by handwheel Feed track speed variator from 6 to 20 mt/min Extractable roller conveyor for panel support Abrasive belt cleaning blower N° 1 suction mouth diameter mm 120 N° 1 suction mouth diameter mm 100 Compressed air 6-7 atm Overall dimensions mm 2100 x 1300 x 1400 h Weight kg 1100

Description: Edgebander with glue pot, edge trimming unit, trimming unit, feed with various speeds, suitable for gluing solid wood up to 3 mm Approx. Onsite Dimension. (l x w x h): 3,000 x 1,500 x 1,400 mm, weight approx.: 780 kg

Description: Edgebander with glue pot and the following units: End trimming Roughers Fine trimmers Edge scraping Brushes Complete with bar for holding particularly large workpieces Approx. Onsite Dimension. (l x w x h): 4,000 x 1,800 x 1,600 mm, weight approx.: 1,800 kg

Description: For veneers and solid wood Working units with end trimmer, rough trimming unit, fine trimming unit The machine can working up to 4/5 mm edge and solid wood Approx. Onsite Dimension. (l x w x h): 5,000 x 1,800 x 1,600 mm, weight approx.: 1,500 kg

double-sided edge processing line, manufacturer: IMA, type: Combima PU/II/R75/1220/F/V/R3, year of manufacture: 1999, serial no.: 13286, control IMA Imatronic 100, working width max. approx. 1,500 mm, 1x milling, 2x form milling, mould gluing unit, 2x cross-cutting unit, flush milling unit, mould scraper blade, groove unit, 2 polishing units, outlet roller conveyor, L approx. 6,000 mm, transition bridge 8 stages, (award is subject to reservation, sum of bids 334-350 or collective bid of item 333 will be accepted after expiry of the Auction)

Description: serial number 209/1-506 series KAM15V3 ordernumber 15506565 control PPC 315 with Touchsreen feed rate: 10 - 18 m/min workpiece length: min. 160 mm workpiece width: min. 60 mm workpiece thickness: 8 - 60 mm edge thickness: 0.4 - 8 mm serial number: 209/1-506, workpiece thickness: 8 - 60 mm, feed: 10-18 m/min, control: PPC 315, Approx. Onsite Dimension. (l x w x h): 5,340 x 1,823 x 2,030 mm, weight approx.: 1,750 kg

Description: HOMAG OPTIMAT Edge Bander (incomplete) Approx. Onsite Dimension. (l x w x h): 10,230 x 1,150 x 2,080 mm, weight approx.: 3,500 kg

Description: FRAVOL Edge Bander for Shaped Pieces(incomplete) Approx. Onsite Dimension. (l x w x h): 1,280 x 990 x 890 mm, weight approx.: 500 kg

Description: HOMAG OPTIMAT KAL 310 Edge Bander (incomplete) Approx. Onsite Dimension. (l x w x h): 8,060 x 1,010 x 1,870 mm, weight approx.: 3,500 kg

Description: HOMAG KL 76/A20 Edge Bander (incomplete) Approx. Onsite Dimension. (l x w x h): 8,400 x 1,060 x 2,100 mm, weight approx.: 4,500 kg

Description: BRANDT T-55 Edge Bander Approx. Onsite Dimension. (l x w x h): 1,300 x 900 x 800 mm, weight approx.: 150 kg

Description: IMA COMPACT PC/F/DV/6220 Edgebander Panel thickness: 10 mm Pre-Milling Unit Edge thickness: 12 mm End trimming unit Rough Milling unit MFA Milling unit (fine trimming + Corner rounding) Profile Scraper + Flat Scraper + Buffing unit Feed advance: 12 m/min Cut shear to: 0.2 - 3 mm Working height: 873 mm Max plate thickness: 45 mm serial number: 07048, control: IMA, Approx. Onsite Dimension. (l x w x h): 7,450 x 1,000 x 2,000 mm, weight approx.: 3,000 kg

Edge banding machine, Manufacturer: HOLZ-HER, Type: Sprint 1317-2, Year of manufacture: 2002, Serial No.: 135/0-209, Operating pressure: 6 bar

edge thickness: 0,5 - 3 mm, workpiece thickness: 10 - 45 mm, gluing unit: ja / yes, snipping unit: ja / yes, fine trimming unit: ja / yes, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,500 x 1,800 mm, weight approx.: 700 kg

Description: Indumasch Siegen edge milling machine Deburring machine, installed on a roller transport carriage, milling depth 6 mm Approx. Onsite Dimension. (l x w x h): 700 x 500 x 1,300 mm, weight approx.: 75 kg

Description: Technical data: tape thickness: 0.3 - 3 mm material thickness: 8 - 60 mm conveyor speed: 18 - 25 m / min The edgebander consists of the following aggregates: • 2 pre-milling machines for material processing (3 kW each) • material heating lamp • glue heating vessel • container with roller for applying glue to the material • push rollers • 2 stripping units (each 0.8kw) • 2 units with radial cutters for processing the upper and lower edges (1.5 kw each) • 2 postforming aggregates • 2 cyclings • polishing brushes with liquid injectors The edging is fully automated, which means that the height of the beam, pre-milling machines, rollers and all the settings of the cutter depending on the thickness of the material and the strip are adjusted on the main monitor. serial number: 0-200-19-0792, edge thickness: 0.3 - 3 mm, workpiece thickness: 8 -  ...

Joining unit: Yes; Edge thickness: maximum 3mm; Workpiece thickness: from 8mm - 45mm; Workpiece width: minimum 90mm; Glue basins: alternating granulate basins; Cross-cut shears: yes; Cutting / flush sawing: yes with corner round function; Milling station: chamfer/radius; Flat - Scraper: Yes; Radius Scraper: Yes; Inlet ruler adjustment: manual; Workpiece thickness adjustment: manual; Power consumption: 5 kW; Machine length: 2300 mm; Machine width: 1020 mm; Weight: 420 kg;

Description: machine number 0-261-20-6375 edgeband thickness max 3 mm thickness of coiled edgeband max , ,  ,3 mm feedrate max 10 m/min corner rounding unit 1 motor scraper unit , ,  ,Profile scraper control , ,  ,BRANDT EASYCONTROL EC 10+ edgeband height max , ,  ,54 mm workpiece length min , ,  ,70 mm preheating zone , ,  , glue system granulate glue pot below feeding chain quick-change glue pot , ,  , trimming saw 2 motors flush/radius/chamfer milling units , ,  ,1 buffing unit , ,  , magazine for single strips , ,  , type right-side machine supply 400 V/230 V, 3 phases, 50 Hz max. operating full load current 8 A, fuse 16 A control voltage 24 V , total connection , ,  ,5,5 kW  , serial number: 0-261-20-6375, edge thickness:  ...

Edge banding machine Felder G480 The following units are available: Cutting, joining, flush milling, corner rounding, scraper blades, surface scraping blades Year of construction 2016 The machine is in top condition, ready for operation. Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Description: Machine-nr.: 0-261-26-5028 Control: EC 10+ Speed-controlled control with optical start-stop indicator sensors Operating switch: ergonomic LCD switch mounted on the head Border thickness: 0.3 mm / max. 8.0 mm Band cutting device: 0.4 - 3.0 mm (Max. 3.0x30 mm / 1.0x55 mm) Band width edges: max. (1x) 55 mm / (3x) 45 mm Workpiece thickness: 8 - 50 mm . Workpiece width: min. 60 mm Workpiece overhang: min. 38 mm Performance: 11 m/min Workpiece pre-heating Roll magazine: Max. ø800 mm Cut-off shear: 3 mm Glue aggregate1: Hot melt granule Glue pot under glue output roller Gluing roller in travel or - in counterflow Glue aggregate 2: Airteq Hot-Air glue aggregate Pressure zone: Pneumatically driven (1st pressure roller, 2nd roller running freely ensures good compaction) Air supply units: (2x) 2.2 kW, 200 Hz Includes mounted DIA cutters Gluing unit: workpiece p ...

Single-sided automatic edge banding machine with joining unit, hot melt adhesive specification for straight workpieces (EVA-PUR glue basin with outlet function optional), HF cross-cut saw station, HF milling unit, chain feed, double roller top pressure, extendable workpiece support rail and signal lamp for workpiece sequence. For ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 mm and from 8 – 50 mm workpiece height.

Used Edge Sanding Machine Int. Art. Ref. m3526 Manufacturer: Frommia Type KSB 68 Power 3 kW Built in 1977 Tape dimensions 2,280 x 150 mm Weight approx. 250 kg Location: 59425 Unna The machine can be viewed and tried out under electricity. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carr ...

Machine with full equipment: Add Glue up to 15 mm Flat saws Preliminary vessels Chamfer milling Rounding threads and corner copying Grinding unit Flat and rounding drawing blade Smooth with return belt

- with lateral Kappsaege

Table dimensions: 850 x 300 mm. abrasive belt width: 150 mm. abrasive belt length: 2510 mm. abrasive band speed of 16 m/s. Ver ? laipsn suportas angle is 90. Engine power: 2.1 kW. Stakl ? weight: 148 kg. Made In Austria.

Work table: 750 x 290 mm, table height: 185 mm band length: 2600 mm strap width: 150 mm abrasive belt rear: 850 x 200 mm grinding unit swiveling: 90°-45° belt speed: 20 m / sec. Additional table: 330 x 330 mm oscillation stroke: 20 mm Oszilationsmotor: 0.25 (0.34 kW) suction connection Ø: 120 mm motor power output S1 100%: 3.0 kW (4,0 PS) motor power S6 40%: 4,5 kW (6.0 HP) voltage: 400 V machine dimensions (W x D x H): 1700 x 700 x 1080 mm weight approx.: 180 kg

Tool cabinet for bending tools pull-out drawers, allows the two-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated, in any colors of the RAL pallet -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) . number of drawers: 4 squares - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1050mm - mass of the faeces set in a drawer: compartment heahe on 210mm (is varriabel) technical height can be used in total without intermediate boeden 990mm compartment width usable 130mm depth usable 980mm - number of intermediate boeden: 3 stubs ; ready for use

Tool cabinet for bending tools Suitable for WILA/TRUMPF Tools or type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -extendable drawers, allows the two-sided access to the tools -arbitrary adjustment of the inserting roofs -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) run drawers Roller slide rails (serve as additional stabilization) - the cabinet can be disassembled - number of drawers: 4 sets - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1180mm - Mass of the Fa echer in a drawer: compartment hoehe set to 210mm (is varriabel) technical height total usable without intermediate boeden 990mm - specialist width usable 130mm depth usable 1100mm - Number of intermediate boeden: 4 Stueck / completely continuous; new ready for use

equipped with: -2 milling units -1 long belt sanding unit -3 buffing units/profile grinding units

Tool cabinet for bending tools / exhibition object suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg - for AMADA/Promecam tools -extendable drawers, allows double-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated -side fork rails for transport by forklift (cavity under the cabinet) -the drawers run on roller slide rails ( serve as additional stabilization) -the cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Fachbreite usable 130mm - Technical depth usable 980mm - Number of intermediate boeden: 3 stueck

Tool cabinet for bending tools suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allows the two-sided access to the tools -any adjustment of the inserting -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) Cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: compartment hhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Tray width usable 130mm - Depth usable 980mm - Number of intermediate boeden: 3 stueck

Angle cutting machine. NEW.

Type SE-360D Thickness of panel 10-60 mm Edging thickness 0,3-3 mm Feeding speed 13-22 m/min Air pressure 0,6 MPa Voltage 380V/50Hz Total install power 10,5 kW Min. panel dimensions 150(L)x150(W) mm Made in 2017 y. Transport dimensions 4420x900x1560 mm Weight 1400 kg

Manual Edger Esterer EWD DKV with task table good condition ! Immediately available !; Well

Technical data: -Plate thickness up to 6-40 mm -Pipe Beveling min. Ã? 100 mm -Max bevel in one run 10 mm - speed 2.6 m / min -Drive 400 V / 2,2 kW -Space requirement approx. B T 550 x 500 x H 700 mm -Weight approx. 65 kg

Type HLP Voltage 220 V Power 400 W Length 120 mm Diameter 8 mm Made in Germany Weight 70 g

Technical description: -Trimming unit -Milling unit -Fine trimming unit -Scraper -Buffing unit

Type MM2617 Sand Pad Size 3120170mm Sanding belt line speed 18m/s Working table angle 45 ? Working table size 1200240mm2 Motor 4 kW