edge used for sale

This 6-axis Bi Matic CH 2.2 edgebander was manufactured in 2010, featuring a glue pot capacity of 2 liters and dual vertical saws for end trimming at 12,000 rpm. It supports edge thickness up to 3 mm and requires an air pressure of 6 bar. If you are looking to get high-quality edgebanding capabilities, consider the Bi Matic CH 2.2 machine we have for sale.Contact us for more information.

Hydropneumatic mode of operation Profile height: 200 mm under hold-down Max. Punch Height: 150 mm Wither height: 150 mm Weight: approx. 400 kg

Code: 0298 Brand: OSAMA Model: S1R-250 - CE Standard Manual 1 roller gluing machine for edges and block wood, carpentry, furniture, laminated wood beams, and various - CE Standard Technical data: Max working length 250 mm Roller diameter 150 mm Feed speed 28 m/min Motor power Hp 0,25 Working table height 800 mm Overall dimensions mm 1500 x 700 x 850 h Weight kg 100

Inv. Num. : 8966 Type: Optimat KAL 210/A3/S Producer: HOMAG Created: 2008 Parameters: Control System: Power Control PC 22 Binding height: 950 mm Edge thickness: 0.3-3 mm Part thickness: 12-40mm Feed speed: 18-25 m/min Minimum. Material width: 60 mm Machine dimensions: 8300 × 1300 × 1800 mm

Code: 0316 Brand: HIRZT - ITALY Model: MIREA - CE Standard Automatic edge bander with hot melt glue for panels, furniture, custom-made furnishings, wooden doors, kitchens, bathroom furniture and various - CE Standard Technical data: Glue application on the panel Panel height 10/50 mm Max edge thickness 1 mm Minimum panel dimensions 70 x 140 mm Automatic feed with belt drive - Feed speed 4 mt/min Power consumption 4 Kw Copying trimming unit: cutters mm 70 x 14 x 12 Z4 15 degrees Knife end trimming unit Extendable front support - Inlet extension - Worktable height 900 mm Overall dimensions mm 1900 x 1100 x 1250 h Weight kg 300

A high-performance Homag Edgebanding Line paired with a Ligmatech Automatic Return System. This combination allows for a one-man operation, where the machine applies the edges and then automatically sends the panels back to the operator for the next pass. Below is a professional draft for an online listing. --------------------------------------------------------------- For Sale: 2007 Homag Optimat Edgebanding Cell Featuring: Homag KAL 310 Edgebander & Ligmatech ZHR 05 Return System This is a complete, industrial-grade edgebanding solution manufactured in Germany. The set consists of a high-speed Homag KAL 310 single-sided edgebander and a Ligmatech ZHR 05 Boomerang return conveyor. This setup is designed for high-volume production, significantly reducing labor costs by allowing a single operator to manage the entire infeed and outfeed process. Machine 1: Homag Optimat KAL 310/10/S ...

Edge banding machine Type: KDF 220 Manufacturer: Brandt Year: 2012 Pre-milling machine Radius Rondomat Radius cidliny Scrapers Machine in good condition, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

This BRANDT OPTIMAT KDF 670 edgebander was manufactured in 2005. It features a comprehensive range of processing units including pre-milling, glue application, edge feeding and cutting, and polishing. Capable of handling workpiece thicknesses from 8 to 60 mm and edge bands up to 15 mm. Feed speed reaches up to 20 m/min, optimizing productivity. Consider the opportunity to buy this BRANDT OPTIMAT KDF 670 edgebander. Contact us for more information about this machine.

Table dimensions X/Y: 1000mm/350mm, grinding belt length: 2600mm, grinding belt width: 150mm, belt speed: 20m/min, grinding beam swivel range: 90°, machine dimensions X/Y: 1650mm/900mm, weight: approx. 300kg. An inspection on site is possible.

This STEFANI Solutions 86 edgebander was manufactured in 2009. It features Nordson equipment, a maximum glued edge thickness of 25 mm, and a maximum panel thickness of 60 mm. The machine includes electric height adjustment, upper belt pressure, and a preheating zone. It also boasts interchangeable roller storage with 12 positions and a replaceable glue pot. Consider the opportunity to buy this STEFANI Solutions 86 edgebander. Contact us for more information about this machine.

This Felder FORMAT 4 Tempora60.06LX edgebander was manufactured in 2019. It features an x-motion PLUS control system, chain feed with a speed of 10 m/min, and a Teflon-coated gluing unit for EVA or PUR granulate. The machine supports edge thicknesses from 0.4 to 3 mm and includes a multifunctional milling unit. Consider the opportunity to buy this Felder FORMAT 4 Tempora60.06LX edgebander. Contact us for more information about this machine.

BIESSE ARTECH edgebander mod. Used Akron 430 A T Technical data: panel length min/max mm. 140-3200 panel width min/max mm. 85-3200 panel height min/max mm.10-60 edge thickness in rolls min/max mm. 0,4-3 Edge thickness in strips min/max mm. 0,4-8 edge height min/max mm. 14-64 work line height mm. 900 protrusion of the panel from the towing track mm. 25 Towing track forward speed 12 m/min Suction air speed 30 m/sec Supply pressure 7-10 bar SINTRA LT Control entrance guide with mechanical visor -Correction group: nr. 2 KW 1.8 motors with skid copiers Vertical adjustment of tool position - Gluing unit: glue tank capacity kg. 2 nr. 3 compressed air back pressure rollers Numerical display Edge thickness - Shear unit with 2 thrust pressure positions according to the thickness of the edge - Automatic strip edge loader - Trimming unit : nr. 2 motors KW 0.50 copier with ski ...

This 5-axis SCM Stefani MD HP edgebander was manufactured in 2013. It features a robust steel construction, high-frequency motors, and a Startouch control system with a 12 touchscreen. Capable of handling solid wood edges up to 15 mm and rolls up to 3 mm, it includes a pre-milling unit, interchangeable glue pot, and a feed speed of 25 m/min. Consider the opportunity to buy this SCM Stefani MD HP edgebander. Contact us for more information.

Automatic edgebander machine HOLZHER STREAMER 1057 second hand machine working condition : Excellent , like new declaration of CE-conformity conformity marking CE mark with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , solid wood max.mm.6 for furniture, furnishings, kitchens, bathrooms, doors, panels and various Control HOLZ-HER KPL volt. 400/50 technical details: min. height of gluing panel mm.8 max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 min. panel width mm.65 min. panel length mm.160 max.feed speed: 10 mt./min. support for large panels soundproof cabin glue system cartridge composition machine . units : 1.Magazine for single strips HOLZ-HER Edge magazine 1903 2.Premilling unit . HOLZ-HER Premilling unit FG 201 3.Trimming saw 2 motors . HOLZ-HER Trimming saw 1918 PNEU ...

This HOMAG KAL 330/6/A3/S2 was manufactured in 2009. A used edgebander featuring a gluing unit for EVA hot melt adhesive, pressure zone, cutting unit, copy milling, scrapers, and a buffing unit. Includes a LIGMATECH workpiece returning system. Consider the opportunity to buy this HOMAG KAL 330/6/A3/S2 edgebander. Contact us for more information.

Used machine Without pre-milling Edge Caps Front/Rear Milling Rounding Top/Bottom Milling Rounds Front/Rear Scraper Blade: Top/Bottom Polishing Top/Bottom

Edge banding machine Sumbel Perkeo 90; cleaned and tested; Working width 90mm; 1 roller; suitable for cold glue. Edge gluing machine Sumbel Perkeo 90; cleaned and checked; working width 90mm; one roller; used for cold glue.

Hydropneumatic mode of operation Profile height: 180 mm under hold-down Max. Punch Height: 145 mm Wither height: 150 mm Weight: approx. 400 kg

Edgebander manufactured in 2005. This OTT Twister features a hot-cold melt adhesive application process and can handle edge thicknesses from 0.3 to 10 mm. It supports workpiece thicknesses of 8 to 60 mm and has a feed speed of 14-20 m/min. If you are looking to get high-quality edge banding capabilities, consider the OTT Twister edgebander we have for sale. Contact us for further details.

Hydropneumatic mode of operation Profile height: 180 mm under hold-down Max. Punch Height: 145 mm Wither height: 150 mm Weight: approx. 400 kg

Edge banding machine Type: Sprint 1317 Manufacturer: Holz-Her Year: 2006 Edge Control with 18.5 16:9 color touch screen rotary control panel, memory for programs, motorized adjustment of the pressure beam, feed using a transport chain, feed 8–18 m/min extendable support surface for workpieces Trimming milling unit 1961, diamond cutting cutter in right- and left-hand operation, automatic adjustment to the height of the workpiece Edge feeding 1903 Pre-cutting up to 3 x 45 mm (depending on the material) Adhesive system 1905 Multi-System automatic adjustment of the glue height using the touch nozzle, Pressure regulator for adjusting cartridge pressure, the possibility of using PUR adhesives, pressure device 1913 MOT, 1. cylinder driven Trimming unit 1918 with pneumatic adjustment Pneumatic cut-off saw rotating Multifunctional unit 1824 MOT 4 with a multifunctional  ...

Hydropneumatic mode of operation Profile height: 210 mm under hold-down Max. punching height with 2-way adjustable punching heads: 145 mm Wither height: 150 mm Weight: approx. 400 kg

: 0,4-3 / 8 mm Workingpiece thickness from to: 8 - 50 mm Total length: 5.360 mm Feed speed: 11 m/min. total power requirement: 7 kw Weight: ca. 2.500 kg Premilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Buffing unit: Ja Spraying device: Ja : Elektrisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4 ROLL HYDRAULIC DUAL PRE-PINCH 3000x15 MM PLATE BENDING MACHINE NEW Brand MG model M3015 -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat -safety and emergency systems installed -manuals and schematics along with the machine

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Manufacturer: Himmel, milling motor from Okoma table router -Type: 2 LS 80 -Power: 1.5/2.2 kW 11770/17790 rpm -Voltage: 110/165 V/200/300 Hz -Dimensions: 460/240/H150 mm -Weight: 25 kg

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, profile holder edge banding machine -Manufacturer: Homag, profile holder from edge banding machine BRANDT KM 35 -Individual components: see photos -Dimensions: 665/540 / H375 mm -Weight: 30 kg

Edge banding machine, edge banding machine, edge banding machine, finishing unit, buffing unit, modular assembly kit, format processing unit, double-end profiler, edge processing machine, sanding unit, edge banding unit -Unit: from edge banding machine BRANDT KM 35 -Motor: Groschopp type PM1 72-35 - Mot 180 V / 54 W. -Individual components: see photos -Dimensions: 425/270 / H260 mm -Weight: 24 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Gear ratio: 1:2.5 -Voltage: 220/380 volts -Receiving shaft: Ø 30 mm -Tool: Ø 180 x 12-20 mm -Dimensions: 570/340/H195 mm -Weight: 56 kg

Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with: copying device -Equipment: 1 grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Dimensions: 1200/1420/H1520 mm -Weight: 656kg Compact linear milling and grinding machine for any profile on strips and panel edges. Extremely short changeover times to a stationary grinding machine. Corner processing on MDF and solid wood workpieces with different radii (R = 1 to R = 30 mm) and corner angles. Manual creation of corner angles from 25 to 170 degrees. The grinding process for corner processing takes place in one clamping (approx. 10 seconds).

Gluing unit, gluing section, gluing head, heating tank for edgebanders, edgebanding machine, melting unit with granule container -With the pre-melting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0600 -electrically heated -Dimensions: 460/160/H340 mm -Weight: 19.5 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0600 -electrically heated -Dimensions: 470/175/H385 mm -Weight: 20.3 kg

Gluing unit, gluing section, gluing head, heating tank for edgebanders, edgebanding machine, melting unit with granule container -With the pre-melting device, you always have enough hot melt adhesive available. -Manufacturer: HOMAG -Type: 0-380-03-0497 -Type: 2-006-51-2870 -electrically heated -Dimensions: 400/70/H225 mm -Weight: 10.6 kg

Gluing unit, gluing section, gluing head, heating tank for edgebanders, edgebanding machine, melting unit with granule container -With the pre-melting device, you always have enough hot melt adhesive available. -Manufacturer: ENA -Type: 4-060-15-0660 -electrically heated -Dimensions: 410/140/H220 mm -Weight: 8.2 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Voltage: 165 volts -Power: 0.22 kW 17250 rpm at 300 Hz -Collet holder: Ø 8 mm -Thread: right -Number: 3x engines available -Price: per piece -Dimensions: 200/80/H90 mm -Weight: 1.8 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Voltage: 165 volts -Power: Motor 0.22 kW 17250 rpm at 300 Hz -Socket: Ø 15 mm -Thread: right -Number: 5x motors available -Price: per piece -Dimensions: 200/70/H90 mm -Weight: 1.8 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Voltage: 133 volts -Power: 0.15 kW 11160 rpm at 200 Hz -Recording: Ø 15 mm -Thread on the left -Number: 6x motors available -Price: per piece -Dimensions: 200/70/H90 mm -Weight: 1.7 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Manufacturer: Perske, milling motor type VS 31.09/2 -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Shaft mount: Ø 20 x 10 mm -Number: 3x engines available -Price: per piece -Dimensions: 250/60/H155 mm / 240/60/H140 mm -Weight: 3.4 kg/pc.

Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with copier -2x: milling heads -Power: 1.5 kW -Speed: 3000-6000 rpm -1x: grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Milling and grinding heads in thickness: adjustable -Max. Workpiece thickness: 40 mm -Max. Corner radius: 40 mm -Dimensions: 1200/1600/H1520 mm -Weight: 782 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor, electric motor -1x motor: 0.6 kW 18,000 rpm at 300 Hz -Voltage: 165 volts -Shaft holder: Ø 16 mm -Tool: Ø 70 x 20 mm -with: copy unit -with: quick change holder -Number: 3x spindle motors available -Price: per piece -Dimensions: 310/175/H250 mm -Weight: 6.5 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Quantity: 1x unit available -Dimensions: 400/180/H500 mm -Weight: 32 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container - Manufacturer: HOMAG - Scope of delivery: see pictures -electrically heated -Number: 1x glue basin available - With the premelting device, you always have enough hot melt adhesive available -Dimensions: 480/220 / H200 mm -Weight: 30 kg / piece

Double end profiler, edge processing machine, flush milling cutter, edge milling cutter, spindle motor, milling motor -1x motor: 1/1.5 kW 2670/5710 rpm at 50/100 Hz -1x motor: 5.5/8 kW 2870/5880 rpm at 50/100 Hz -Motor: mounted on guides -Motors: swiveling -Mill: with inserts -Dimensions: 900/1100/H1000 mm -Weight 274 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 15 mm -Tool: Ø 160 x 3.5 mm -Number: 3x motors available -Price: per piece -Dimensions: 200/85/H70 mm -Weight: 3.3 kg

Double end profiler, edge processing machine, scoring motor, hogger motor, spindle motor, milling motor -Manufacturer: Peske, milling motor type VS 31.09-4 -Power: 0.37 kW 8540 rpm at 300 Hz -Voltage: 165 volts -Take-up: collet -Tool: Ø 8 mm -Number: 2x motor available -Price per piece -Dimensions: 260/60/H140 mm / 255/60/H155 -Weight: 3.5 kg/pc.

Double end profiler, edge processing machine, scoring motor, hogger motor, milling motor, spindle motor -Power: 0.4 kW 12000 rpm at 200 Hz -Voltage: 133 volts -Take-up shaft: Ø 20 mm -Tool: Ø 70 x 20 mm -with indexable milling cutter -Number: 1 piece available -Dimensions: 285/60/H170 mm -Weight: 5kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 0.55 kW 2700 rpm at 50 Hz -Power: 0.95 kW 5360 rpm at 100 Hz -Voltage: 220/380 volts -Acquisition shaft: Ø 20 mm -Tool: Ø 175 mm -Number: 4x engines available -Price: per piece -Dimensions: 430/170/H185 mm -Weight: 15 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges -Power: 0.15 kW 11160 rpm at 200 Hz -Power: 0.22 kW 17250 rpm at 300 Hz -Voltage: 133/200 volts -Admission: -Tool: Ø 150 mm -Dimensions: 560/220/H240 mm -Weight: 16 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Admission: -Tool: Ø 150 mm -Dimensions: 880/260/H300 mm -Weight: 18.5 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW at 11160 rpm at 200 Hz -Power: 0.22 kW at 17250 rpm at 300 Hz -Voltage: 133/200 volts -Receiving shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 3 kg