edge used for sale

Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with: copier -Number: 1x grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Sanding head in thickness: adjustable -Max. Workpiece thickness: mm -Max. Corner radius: mm -Dimensions: 1200/1420/H1520 mm -Weight: 656 kg

Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with copier -2x: milling heads -Power: 1.5 kW -Speed: 3000-6000 rpm -1x: grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Milling and grinding heads in thickness: adjustable -Max. Workpiece thickness: 40 mm -Max. Corner radius: 40 mm -Dimensions: 1200/1600/H1520 mm -Weight: 782 kg

Key data: 3 mm, 50 mm, 4150 mm

I am selling a fully equipped edge banding machine BRANDT Ambition 1220, built in 2010: Configuration: Manually adjustable entrance stop Manually adjustable joint milling Edge Banding EVA Glue Manually adjustable material pressure zone Pneumatically adjustable cross-cut saws Radius milling top + bottom manually adjustable Round unit 1 motor manually adjustable Radius scraper R2 pneumatically shut-off Control panel Working height adjustable by servo motor Material height 8-50mm Edge material thickness 0.4-3mm Feed speed 10m/min. Overall length including feed plate 4150mm Total weight 1320kg Very good condition, fully functional!

Key data: 8 mm, 50 mm, 5860 mm

I am selling a fully equipped edge banding machine BRANDT Optimat KDF 550 C, built in 2006: Configuration: Manually adjustable entrance stop Manually adjustable joint milling Edge banding EVA Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Radius milling top + bottom manually adjustable Round unit 2 motor manually adjustable Radius scraper R2 pneumatically shut-off Scraper blade surface Polishing brushes Control panel Power Control PC20+ Working height adjustable by servo motor Material height 8 - 50mm Edge material thickness 0.4 - 8.0mm Feed speed 11m/min. Assembly length including feed plate 5860mm Total weight 2660kg Very good condition, fully functional!

Wood Her UNO 1304 FÜ + PU Edge thickness 0.4 - 6 mm Control panel with selector switches for adjusting the units Pre-milling unit for attachment in front of the gluing part Fully automatic edge magazine for rolls and strips Glue Application Station: Cartridges + PU Gluing Workpiece height 6-55 mm Printing unit pneumatic Cross-cut unit 1918 for rolls and strips up to 8 mm edge thickness with pneumatic changeover of 0-10° incline of the cross-cut saws Milling unit flush milling 6 mm, radius milling - bevel milling - 15° Scraper unit for chamfers and radii with 2 scraper blade carriers pneumatic indentation and disengagement Surface Scraper Unit - Finish Machine is WORKSHOP OVERHAULED in TOP CONDITION from a craftsman's workshop

Sale of a gebr. edge banding from the manufacturer Hebrock. Specifications: Year of construction:1992 Edge thickness:0.4-8.0 mm Min. workpiece length:300 mm Min. workpiece width:70 mm Extraction connection Ø:140 mm Weight (kg):800 Dimensions (L x W x H mm):4100 x 1400 x 1300 mm Workpiece height:8-50 mm Chain feed:11 m/min Cross-cut saw unit:Yes Flush & Radius Milling Unit:Yes Hot melt glue container Support plates Roller capping pneumatically up to 3 mm edge thickness Flush milling unit

Lot 6000 pcs protection bracket for packaging Edge protection bracket made of cardboard, dimensions approx. 150 x 60 x 60 x 3mm The brackets are very stable and ideal for packing pallet goods and as corner protection, edge protection when lashing. Dimensions approx. 1200 x 800 x 600mm (LxWxH). Weight approx. 290kg. The edge protector brackets are from a stock clearance and are unused. Sold as lots only, no smaller quantities possible. The goods can be presented by appointment at our site.

Panel thickness: 12 - 60 mm Feed speed: 18 - 24 m/min Edge thickness: 0,4 - 3 mm for coil edges, 0,4 - 20 mm for strips / solid wood Equipment: Help carriage feeding the panels rectangular automatic fence at the infeed Squaring device: 2 x 3,0 KW Panel edge pre-heater Hot melt unit: QA34 / A20 edge magazine Lateral pressure rollers, thickness programmable, 1 driven, 6 non-driven rollers End trims HL83, programmable change straight/chamfer, 2 motors 0,5 kW Rough trimming: 2 x 1,5 KW Top/bottom fine trimming, tilting, 2 x 0,4 kW Contour trimming FK 13, 2 x 0,4 KW, with 8-fold toolchangers Universal milling motor 4kW Profile scrapers Flat scrapers Buffing unit with oscillation Controlls: HOMATIC NC16

CNC controlled edging machine serves to edge curved and shaped panels Panel thicnkess: 16 - 50 mm. Edge thickness: 0,8 - 3 mm. Dimensions: min 400 x 400 mm, max 1800 x 1800 mm 650 x 2500 mm unit 1: glue roller with edge coil magazine Glue pot with 3 l capacity. Unit 2: end trimming motor motor 0,8kW Unit 3: Trimming unit motor 2 x 2.2kW

EDGE BANDING machine BIMATIC B 220 IR-S second hand machine for edging veneer, PVC, Abs , wood volt. 220 ( 3 phases ) . by applying a 9 kW electric transformer the machine operates at 380 volts. composed by : 1. glue pot 2. edge cutting shear 3. end trimming unit 4. trimming unit / tilting chamfering unit technical details : edge thickness min. / max. mm. 0,4 / 10 panel height mm. 60

•Compact design - edge thickness 0.4 - 6 mm •Control panel with selector switch for adjusting the units •Pre-milling unit for attachment in front of the gluing part •Fully automatic edge magazine for rolls and strips •Adhesive application station cartridges + PU gluing •Workpiece height 6-60 mm •Printing unit pneumatic •Cross-cut unit 1918 pneumatically for rolls and strips up to max. 6 mm edge thickness •with pneumatic changeover from 0-10° inclined of the cross-cut saws • Milling unit flush milling 6 mm, radius milling 3 mm, bevel milling - 15° •Scraper unit for chamfers and radii with 2 scraper blade carriers •pneumatic engagement and disengagement •Surface Scraper Unit - Finish •Machine WORKSHOP overhauled in TOP CONDITION from stock Lieboch

I am selling a fully equipped edge banding machine BRANDT ProfiLine KDF 790, built in 2006: Configuration: Input stop can be adjusted by menu Manually adjustable joint milling Edge banding with preheating tank Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Heavy milling at the top + at the bottom manually adjustable Radius milling top + bottom servo motor adjustable Groove saw unit at the bottom Round unit 2-motor servo motor adjustable Radius scraper blade R2 pneumatically adjustable / second set R1 included Scraper blade surface Polishing brushes Separator injection at the front Clean injection at the rear Working height adjustable by servo motor Material height 6-60mm Edge material thickness 0.4-12mm Feed speed up to 20m/min. Overall length including feed plate 7860mm Mileage status 1,650,000 meters glued. Incl ...

Description: serial number: 6294 , edge thick: 0,4 - 3 mm edge thick with L-Tec: 0,7 – 3 mm min. panel lenght without rounding unit: 70 / 120 mm min. panel lenght with rounding unit: 95 mm installed power: 10 kW min. panel width without roundin unit: 95 mm min. panel width with roundin unit: 120/250 mm max panel thick with pre-milling Unit: 60 mm max panel thick with rounding unit: 60 mm max panel thick without pre-milling and rounding unit: 60 mm min panel thick: 10 mm working speed: 11 - 18 mt/1’ dust outlets: Nr. 02 Ø 150 mm pneumatic operating pressure: 6 ATM , supply 400 V, 3 phases, 50 Hz , current 9 A d please also have a look at the pdf files of this machine serial number: 6,294, edge thickness: 0.4-3 mm, workpiece thickness: 10 mm, feed: 11-18 m/min, control: BM PCS12, total power approx: 10 kW, Approx. Onsite Dimension. (l x w x h): 5,700 x ...

Description: Max. board thickness 15 mm, max. solid wood height 50 mm, min. panel length 150 mm, min. workpiece width 50 mm, max. feeding speed 20 m/min, total power 10 KW, Glueing unit complete with edge press rollers End cutting unit Trimmer unit Edge trimming unit Edge scraper unit Brush unit Approx. Onsite Dimension. (l x w x h): 4,500 x 1,200 x 1,450 mm, weight approx.: 1,200 kg

Description: Edge height max 51 mm Minimum workpiece length mm: 180 Electro-motor height adjustment: yes  , edge thickness: max 13 mm, workpiece width min.: 60 mm, feed: 11 m/min, gluing unit: YES, snipping unit: YES, rough trimming unit: YES, fine trimming unit: YES, profile scraping unit: YES, edge buffing unit: YES, Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 0 x 0 x 0 kg

Holz Her Sprint 1321 FÜ + PU heavy-duty version - edge thickness 0.4 - 15 mm PLC Screen Control Edgecontrol Motorized, positioning-controlled bridge height adjustment Pre-milling unit for fastening upstream of the gluing station Fully automatic edge magazine for rolls and strips Glue application station cartridges + PU gluing Car. Glue height adjustment / tactile nozzle Printed plant 1913 pneum. Cross-cut unit for rolls and strips 1918 - 15 mm with pneumatic changeover of 0-10° incline of the cross-cut saws Multifunctional milling unit with mot. Adjustment: Flush milling - 15 mm, radii and bevel milling -15° Frommilling unit - corner rounds 1833 Scraper unit for chamfers and radii 1929 pneum. pneumatic indentation and disengagement Surface Scraper Unit - Finish pneum. Buffing unit for replastering and edge polishing with 2 textile discs HIGH-END spraying device Compl ...

Code: 0259 Brand: HOLZHER Model: TRIATHLON 1425-420V - CE Standard Edge bander with grinding unit for wood, pvc, veneer, abs, melamine, solid wood, formica, solid wood and various - CE Standard Technical data: Edge thickness min/max mm 0,4/25 Panel height mm 60 Glue in cartridges Composition: Grinding unit for panel grinding - N° 2 cutters with adjustable infeed - Suction diameter mm 120 Gluing Unit with cartridge - Cartridge loader - N° 3 pressure rollers End cutting unit with 2 motors - Rpm 12000 Tilting trimming unit Tilting bevelling unit Edge Scraping Unit Rounding UnitAutomatic revolving Spindle Unit - Motor Kw 3,8 - Rpm 12000 Oscillating Brush Unit - Brush diameter mm 150 Hanging control panel Protection cabin Removable support roller conveyor Compressed air 6-7 atm Overall dimensions mm 7500 x 1000 x 1750 h Weight kg 3500 MACHINE NOT RECONDITIO ...

Description: - Hot use of pre-glued strips for finishing linear and shaped panels - Main motor 3.95 kW - Accidental burn protection - Height adjustable edge guide - Rubber pre-tape roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.8 - 2 mm - Min/Max panel thickness 12/43 mm - Working speed: 7 m/min The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 470 kg

Description: With Homag workpiece feeder TBL 100/25/12/F and Ligmatech workpiece return unit ZHR 30L/155/F  , edge thickness: 3 mm, workpiece thickness: 12 -60 mm, feed: 18 m/min, gluing unit: Ja, snipping unit: Ja, rough trimming unit: Ja, fine trimming unit: Ja, profile trimming unit: Ja, universal milling unit: Ja, edge sanding unit: Ja, flat scraping unit: Ja, profile scraping unit: Ja, edge buffing unit: Ja, control: powerControl NC 21, return system: Ja, total power approx: 40 kW, Approx. Onsite Dimension. (l x w x h): 10,000 x 6,000 x 1,700 mm, weight approx.: 4,000 kg

Description: - Hot gluing of pre-glued strips for finishing linear and shaped panels - Main motor 3.59 Kw -Protection against accidental burns - Height adjustable edge guide - Pre-tape rubber roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.4 - 2 mm - Min/max panel thickness 12/43 mm - Working speed: 7 m/min Approx. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 485 kg

Description: Serial n°: 200.07.006.15 maximum adhesive thickness in 10 mm maximum panel thickness 60 mm maximum thickness of rolled material 3 mm minimum piece length 140 mm minimum workpiece width 70 mm maximum feed rate 12 m/min electric height adjustment pre-heating zone granular gluing system glue container below the food chain changeable glue tank suitable for PUR glue spraying system straightening unit End cutting unit 2 motors flush/radial/bevelling stations 1 Edge copying unit 1 motor scraping unit Edge scraper, Flat scraper polishing unit strip magazine synchronised aggregate NC axis(es) machine model from left to right machine length in 5.140 mm FORMAT 4 E-MOTION control Loading cost to be defined serial number: 200.07.006.15, edge thickness: 10 mm, workpiece thickness: 60 mm, feed: 12 m/min, control: FORMAT 4 E-MOTION, total power approx: 11 kW, Approx. Onsite Dimension. (l x ...

Description: - Edge banding machine - Serial number 02352 - Total installed power 21 KW - Edge thickness from 0.40 mm up to 12 mm - Workpiece thickness from 10 mm to 45 mm - Minimum workpiece length 150 mm - Feed motor 2.20 KW - Control system - IMA 08.376 joint trimming unit, 2 x motor 3 KW-12000 rpm - IMA 283.08 Gluing unit with pot for granulated hot melt adhesive - Pressure unit with (1+5) rollers - IMA 08.415 Cross-cut unit, 2 x motor 0.66 KW-11100 rpm, swivels up to 8° - IMA 08.0555 Rough trimming unit, 2 x motor 1.80 KW-12000 rpm (upper motor missing) - IMA 08.346 Profile trimming unit, 2 x motor 0.50 KW-18000 rpm - IMA 08.519 Profile scraper unit - Flat scraping unit - Milling unit, motor 2 KW-12000 rpm - IMA 08.612 Edge buffing unit, 2 x motor 0.25 KW-1320 rpm IMPORTANT: The return system shown in the photos is NOT included in the scope of delivery Approx. Onsite Dimension.  ...

Description: High-perfomance Edegbanding machine with PU-gluing and return conveying system. Worked only for approx. 1 year in single-shift workshop: infeed area with long infeed fence, 5-roller infeed unit and squared infeed table (500 x 500 mm) with controlled fence. Spraying unit for separating agent top/bottom. per-milling unit 2 x 4,5 kW ,incl. horizontal positioning controlled gluing unit with PUR-pre-melter BALTI Dual Pur. 2 times automatic glue-quantity dosing. 6-roll pressure zine, per-heating table pre-milling unit for premilling of edge projection on the top side snipping unit 2 x 600 W with automatic lateral scanning and pneumatic inclination 0 and 25° rough trimming unit 2 x 1,85 kW with HSK-25 retainer corner rounding unit KFA x30 - 0,5 kW mit HSK retainer multi profile scraping unit flat scraping unit buffing unit return conveying system Feddback 100 for ma ...

Description: Rubber pads conveyor belt renewed approx. 2022 Annual maintenance by HOMAG incl. various new parts (see photos) Second glue pot (serviced annually) Single-sided machine for joint trimming of straight workpiece edges, gluing and finishing of various edge materials from the roll or as strips, up to 20 m edge thickness, with longitudinal and transverse throughfeed. Fixed stop side on the left. BRIEF DESCRIPTION OF THE BASIC EQUIPMENT: BASIC MACHINE WORKPIECE TRANSFER DEVICE - TOP PRESSURE CONTROL power control PC22 FREE SPACE Joining unit GLUING PART A20 BASIC for rolls up to 3 mm and strips up to 20 mm NOISE PROTECTION CAPPAGGREGATE FREE SPACE for further processing units BASIC MACHINE: Continuous machine stand for setting up the processing units Workpiece support with extendable roller rail approx. 800 m Glue roller drive for feed stop Glue container lift ...

Description: - Hot use of pre-glued strips for finishing linear and shaped panels - Main motor 3.95 kW - Accidental burn protection - Height adjustable edge guide - Rubber pre-tape roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.8 - 2 mm - Min/Max panel thickness 12/43 mm - Working speed: 7 m/min The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 470 kg

STEGHERR 2, 5 m Edge press 2, 5 m length on one side from the bottom with edge - preheating rail Driving device Space requirement approx. L = 2900 B = 600 H = 900mm G &-2789

480 m2 steel construction stage used, good condition, see pictures Length approx. 21 m Width approx. 23 m Height lower edge 2.45 m Height top edge 2.9 m fastened with screws and nut Grid distances adjustable in length without shelf shelves Negotiation price: € 14,000.00 net from stock Disassembled and loaded from stock Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 3000 lfm pallet racks in stock by numerous manufacturers Changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock Purchase / Sale We are looking for, or offer numerous items from various areas on an ongoing broom-pure company clearances Operational resolutions Fast- flexibl ...

Edge gluing machine - see picture Next: Edge gluing machine NEY-SENIOR SKM 100/3 gemaess Pictures

Edge banding machine OTT Type: ATLANTIC V 6 B.J.: 1998 Glue unit / also polyurethane adhesive can be Cut from the edge Green cut front and rear Simple milling Profile milling Profile cyclin Simple cyclin Speed 12 m / min Overall dimensions: 0.400 cm, 95 cm wide, 130 cm high; Weight: 1,400 kg

Automatic Edge Banding machine type OCMAC BS 21 . second hand composition : - glue pot - edge-trimming unit (2 motors) Kw 2 each one . rpm 12.000 with cabinet with HF converter Hp 5 volt. 380/50

Edge bander type STEFANI BRT UNIVER with trimming unit and automatic feeder for straight, curved and shaped panels . application of melaminic, Pvc, veneer edges, in rolls and strips Technical details: Max panel height mm 60 Edge thickness mm 0,4 - 1,5 Trimming unit 12000 rpm Automatic feeder Overall dimensions: mm 1350 x 1000 x 1150 h Weight kg 480

Edge gluing machine Sumbel Coronel; good condition; cleaned and tested; Working width 60mm; 2-rollers; suitable for hot or cold glue; Glue basin height-adjustable. Edge gluing machine Sumbel Coronel; good condition; cleaned and checked; working width 60mm; two rollers; used for hot or cold glue; glue reservoir adjustable in hight.

Edge chamfering machine make PULLMAX type X 93Machine -No: 70270-06, built in 1982for optimum beveling for perfect weld preparationexact, deformation-free, metallically pure and chemically unaffectedTechnical specifications:Feed rate 1.5 / 3.1 m / minBevel angle 25 - 55 °smallest straight edge 3 mmMax. Sheet thickness 50 mmExternal dimensions 1360 x 1110 x 1510 mmWeight approx 1300 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

• Workpiece thickness: 8 - 55 mm • Workpiece width min.: approx. 30 mm • Workpiece length min.: approx. 130 mm • Edge thickness: 0.4 - 1.0 mm • Roller separation max.: 0.8x60 mm • Inner radius: 25 mm • Heating time: max. 2 min • Temperatures: approx. 260 - 400°C • Diameter foil plate: 600 mm • Table depth min.: 465 mm • Table depth max.: 955 mm (extended) • Table length: 1400 mm • with edge cutter • Working height: approx. 230 mm • Weight: approx. 87 kg • Changeable location, as equipped with 2 wheels! Electrical connector: • 230V/ 50/60Hz Total connection: • 3.3 kW Heating: • 3.0 kW Dimensions (WxDxH): approx. 1700 x 1600 x 1100 mm Transport dimensions (HxWxD): approx. 1100 x 1400 x 750 mm (without pallet!) The machine has been completely reworked, cleaned and thoroughly tested in our company. (Changes a ...

Edge gluing machine Sumbel Coronel 120; good condition; cleaned and tested; Working width 120mm; 2-rollers; suitable for cold glue; Glue basin adjustable in height. Edge gluing machine Sumbel Coronel 120; good condition; cleaned and checked; working width 120mm; two rollers; used for cold glue; glue reservoir adjustable in hight.

Edgethickness: 0,3 - 20 mm Edge height: 14 - 65 mm Edge length: minimum 160 mm Feedrate: 6 - 30 m/min Workpiece thickness: 8 - 60 mm Workpiece width: minimum 65 mm Workpiece length: minimum 150 mm

Edge glue Brandt Type: KD 86 Built: 1993 Edge thickness up to 12 mm Glueing of roll up to 3 mm with pneumatic cross-cut station Glued part with Quickmelt pre-melting tank Heavy pressure zone with one driven and three reprint rollers Saw cutting station for the front and rear overstanding Milling station flush / chamfer Second milling station radius milling R 3 mm Corner copying with pass Radius drawing blade R 3 mm Chip catching box Schwabbelstation Pneumatic package for post-processing agregates Extendable support for large parts Control panel at eye level Space requirement approx. 6100 mm

Panel thickness: 12 - 60 mm Feed speed: 18 m/min Edge thickness: 0,3 - 3 mm for coil edges Equipment: Programmable fence at the infeed Squaring device: 2 x 3,0 KW Glue application unit: A34 double edge magazine for 2 coils Lateral pressure rollers, thickness programmable, 1 driven, 2 non-driven rollers End trims HL84/85, programmable change straight/chamfer, 2 motors 0,18 kW Rough trimming: 2 x 0,55 KW Contour trimming FK 13, 2 x 0,55 KW Profile scrapers PN10 Flat scrapers Buffing unit Controlls: HOMATIC NC21

Pre-milling unit: yes; Pre-milling unit material removal: 0 - 2 mm; Plastic edges: 0.4 - 3 mm; Workpiece thickness: 10 - 40 mm; Workpiece length min.: 90 mm; Workpiece width min.: 120 mm; Glue unit: granules / glue container quick change kit; Chopping knife: yes; Flush cross-cut unit: yes; Flush radius milling unit: yes; Radius Scraper Aggregate: yes; Surface scraper unit: yes; Power consumption: 8 kW; Machine Length: Machine Width: Machine height: Weight: Prima 5.2 r. â€" Partnership Edition Aggregates: Joining milling unit incl. AIGNER Diamant jointing cutter heads, with DIA interchangeable knife system Konstantin and controlled edge blow-out nozzle behind the 2nd joining cutter head. Cross-cut saw unit 1 motor, 2 saw blades radius milling unit, with Easy Set adjustment system Radius puller blade unit can be inserted and removed, incl. extraction device with chip c ...

Pre-milling unit: yes; Pre-milling unit material removal: 0 - 2 mm; Plastic edges: 0.4 - 3 mm; Workpiece thickness: 8 - 50 mm; Workpiece length min.: 130 mm; Workpiece width min.: 80 mm; Glue unit: granules / glue container quick change kit; Chopping knife: yes; Flush cross-cut unit: yes; Corner copying unit: yes; Flush radius milling unit: yes; Radius Scraper Aggregate: yes; Surface scraper unit: yes; Buffing unit: yes; Power consumption: 9 kW; Machine Length: Machine Width: Machine height: Weight: Prima 7.3 r.a. PLUS â€" Partnership Edition Aggregates: Joining milling unit incl. AIGNER Diamant jointing cutter heads, with DIA interchangeable knife system Konstantin and controlled edge blow-out nozzle behind the 2nd joining cutter head. Cross-cut saw unit with suction device incl. pneumatically swivelling saw blades, adjustable and programmable from the control pa ...

Hot air moulded part edge banding machine, pre-coated edges, Roller separation, stencil preference, second blower for edge heating.

Edge banding machine Sumbel Perkeo 60; good condition; cleaned and tested; Working width 60mm; 1 roller; suitable for cold glue. Edge gluing machine Sumbel Perkeo 60; good condition; cleaned and checked; working width 60mm; one roller; used for cold glue.

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Non-stick spray system Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication Powertouch control

Band width: 200mm; Tape length: 3000mm; Table size: 960mm x 352mm; Additional table: 330mm x 330mm; Veneer grinding device: yes; Oscillation: yes; Swivel grinding unit: yes; Suction connection: 120mm; Motor power: 3 kW; Machine length: 1900mm; Machine width: 900mm; Weight: 310kg; Grinding unit can be swivelled up to 45Â via lever The machine stand made of welded steel guarantees high torsional rigidity and vibration-free working. Oscillating sanding belt with separate geared motor for better sanding results oscillation optionally switchable Abrasive sole with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table for utilising the entire abrasive belt width Height-adjustable additional table with suction for grinding radii The spring-loaded belt tension automatically compensates for belt length differences. With double suction Extenda ...

Equipment: - Quickmelt gluing part for hot melt adhesive - Automatic edge magazine for rolls and fixed lengths - Heavy pressure zone with driven, pneumatically applied main pressure roller and 2 free-running repressure rollers. (adjustable by program) - motor-adjustable upper pressure. - Control panel on the machine inlet. - Electronic control power control PC 20+ - Feed variable 8-14 m/min - PU overpressure rollers - Inlet ruler adjustable by program - Joining milling unit 2 x 2.2 kW - Bevel cross-cut unit/straight 2 x 0.18 kW - Milling unit 2x0.55 kW (adjustable by program) with multiple roller pressing - Mould milling unit top+bottom, 2 x 0.35 kW - Drawing blade with quick-change heads and additional device for pointed workpieces - Glue joint drawing blade - Schwabbelaggregat - Automation package for 1-milling machines, consisting of: 3175 - Pneumatic Adjustment Caps ...

Edge banding machine with joint/form milling machines Brandt Highflex 1220 FC YOC 2015 Workpiece thickness 8 - 60 mm Edge thickness 0.4 - 3.0 mm Feed speed 10 m/min Joining Milling – DIA Tools Gluing unit Contact heating shoe Pressure zone Pneumatic Package Cross-cut unit Flush milling unit Profile drawing blade unit Schwabbelaggregat Electronics control Machine length 4200 mm Machine dimensions W x H 1300 x 2180 mm Weight 1400 kg

Edge banding machine Brandt Optimat KDF 1600 GC YOC 2009 Edge thickness 0.4 - 12 mm Plate thickness 8 - 60 mm Feed 12 m/min Inlet ruler adjustable Pneumatic package Automation package Quickmelt Premelting Unit Joining milling unit 2 x 2.2 kW Cross-cut unit chamfer / Straight 2 x 0.35 kW Milling unit 2 x 0.55 kW Mould milling unit 2 x 0.35 kW (2 units) Drawing blade unit with quick-change heads Surface drawing blade for glue joint Schwabbelaggregat 2 x 0,18 kW Electronics control Connection value 11.5 kW Machine length approx. 6600 mm Weight 2900 kg

Wood power KSO 150F Edge Grinder Grinding unit can be swivelled up to 45° via lever The machine stand made of welded steel guarantees high torsional stiffness and vibration-free operation. Oscillating sanding belt with separate gear motor for better grinding results Oscillation optionally switchable Abrasive sole with graphite coating for a longer service life of the sanding belt Height-adjustable grinding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii The spring-loaded belt tension automatically compensates for belt length differences. With double suction Extendable roller table widening With rubberized grinding roller Veneer edge grinding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved inlet ruler for veneer protrusions Quick changeover from veneer edg ...

Holzstar KSO 750 Edge Grinder With oscillating sanding belt for good removal performance, a clean grinding pattern and a longer service life of the sanding belt With height-adjustable grinding table Standard with -45° to +45° infinitely adjustable miter and workpiece stop Infinitely inclined grinding unit (0°-90°) for vertical and horizontal grinding Table height adjustment by means of handwheel Robust work table made of cast iron with T-grooves, stable stand of the machine when working With height-adjustable additional table for contour grinding Fast and easy sanding belt change via quick clamping system Spring-loaded clamping device for uniform belt tension Abrasive sole with graphite coating as standard Suction nozzle Ø 100 mm With lockable storage option in the standard substructure Equipment details: Thanks to the infinitely variable grinding unit, the edge gri ...

Holzstar KSO 850 Edge grinding machine With oscillating sanding belt for good removal performance, a clean grinding pattern and a longer service life of the sanding belt With height-adjustable grinding table Standard with -45° to +45° infinitely adjustable miter and workpiece stop Infinitely inclined grinding unit (0°-90°) for vertical and horizontal grinding Table height adjustment by means of handwheel Robust work table made of cast iron with T-grooves, stable stand of the machine when working With height-adjustable additional table for contour grinding Fast and easy sanding belt change via quick clamping system Spring-loaded clamping device for uniform belt tension Abrasive sole with graphite coating as standard Suction nozzle Ø 100 mm With lockable storage option in the standard substructure Equipment details: Thanks to the infinitely variable grinding unit, the ...