edge used for sale

EDGE GLUING MACHINE Manufacturer: OTT Austria Type: Euromatic Year built: 1998 CE standard Function : glue-cap-pre-fraesen-fine-fraesen-round-under-round-copy-zieklinen-pol ishing

Edge grinding machine for solid wood . approx. 1 m grinding pad, 1.8 m axle dimension heavy casting machine

with technical advice, Affordable housing Low-cost housing, cmodul austria low cost housing • Pallet circulation systems for filigree and double wall elements NEW & USED • Machines and systems for prefabricated parts - battery formwork, tilting tables and special moulds • Stationary concrete block paving stone and edge stone installations + shapes as NEW • Mobile concrete stone machines + moulds as NEW • Concrete pipe and shaft ring machines and parts thereof • KS - Lime sandstone works • Dry mortar plants and parts thereof • Brickworks and parts thereof our used lines meets after reinstallation by us the Definition RETROFIT

New extractor frame 900 mm on steel construction. 2 winding capoles are used underneath for edge-straight Winding positioned. The winding capoles are fitted with new pneumatic Expansion winding shafts for 76 mm bobbins. with electric drives

1 piece snow shovel (presentaion unit,2 x used so Mint) > Quick recording with forks > Protection against unintended slippage > Clearance angle 2 x to the left or right adjustable > Rubber cutting edge attached 150 x 20 mm, thus it is faster Change later possible > Surface painted RAL 2000 (yellow-orange) > technical data: -Blade width: 1500 mm -adjustable space width: 1,100 / 1,300 / 1,500 mm -Plate height: 620 mm -Fork cross sectional area: 150 x 50 mm -Fork distance: 420 mm -Tare weight: 175 kg -incl. 1 year p + K.-warranty included > MSRP manufacturer: Recommended Manufacturer Price Euro 1.275 export price (delivery inside Germany + 19% Tax) PICK up price from 71116 Gaertringen (Shipping extra on request, possible) save over 37 % compared to Manufacturer price Be ready, because the next winter / weat ...

Schwingkipptisch 1 / tilting table We offer: 6 used vibration table / table We offer: a used Schwingkipptisch 1 / tilting table 1 3.50 x 8.00 Technical data: Manufacturer: unknown Type: 8 x 3.5 m Machine number: unknown Year of built: unknown Documentation: not available Schwingkipptisch 3000 x 8000 x 8 mm designed for a traffic load estimated p 500 kp / m² = m², with formwork upper part completely stored on vrwindungssteifen Kippramen. Under construction from solid shape Weldment for establishing free to carry firm, level floor. Fully fitted with built-in tilting hydraulic for tilt at approximately 80 °, with 2 cylinders, electrical pump unit with oil tank, control and limit switch device and piped inside the tilt table construction. Ingredients: Vibration / vibration motors: 6 pieces Manufacturer: VEB Baustoffmaschienen Ludwigslust Type: A 800/3 28/71 No. o.a. 43190 ...

Milling / Beveling aggregate Serial No.: IMA -for double-sided edge banding machine (1 Unit left right side page / 1 units)

The fishing and packing plants have a simple and this stable and torsion-free construction. The machines are characterized by ease of use, flexibility, reliability and low maintenance requirements. The CAMBORIT clip has a capacity of up to 125 packs / min. 1 x 2 bottles can be packed with the CAMBORIT clip. To do this from flat so called "bars" cut to shaped, that get caught under the edge of the bottle. The machine can be operated automatically or manually. Display and operating elements are located on the control panel. All functions are controlled from the control panel and controlled. Errors of the cycle are displayed on the control panel. Action: At the beginning of production the magazine must first cut to be filled. The minimum level is cut to the magazine below, the machine will not turn on. After switching on the machine when existing minimum level of bottles with a capac ...

manual casemaker CMC LPA (machine like CMC Q-cover 1) format: max 50x70cm; min. 12x15 cm Machine comprising of: - Gluer suitable for use of warm and coldglue (PVA) - Vacuumtable with spotting guides for 1-3 boards - Edge turning in device (1 side) - Niproller press - Delivery table machine is reconditioned in 2016 Available: immediately/sofort

Extension table pull-out extension table with roller rail Roll diameter 25 mm Length 1200mm Excerpt way 170 mm Supplement for edge grinder, milling machine, band saw, long drilling machine, etc. WJ R00201

The aspirator Wetzikon weather is 3 pieces in good condition, ready to use. It consists of intact plants, which have operated until now following machines: CNC machine Striebig vertical panel saw Planing machines Wide-belt sander Table circular saw Edge glue machine Moulding machine The exhaust system consists of 3 installations: 1 system with filter and 2 bag system 2 + 3 system with wooden box below and filter system various pipes and branches, 1 fan 3 HP, 1 fan 2 HP etc. Weight 350 kg Built in 1975 Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

R26097/16 EDELMANN reel offset printing machine model: COLOR PRINT V72 SL age: 2008 paper web width: max. 720 mm printing width: max. 710 mm available: about 12/2011 Servo- drive microprocessing control reel/reel, reel/ sheet unwinder: reel diameter max. 127 cm BST web edge – and centre control Web length control 2 offset printing units automatic ink unit wash-up web turn hole punch device cross cutter UV dryer plow fold system Available: nach Absprache

CONVEYOR BELT CONVEYOR BELT, FEED DIRECT FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -Stable conveyor belt / conveyor belt for many applications in industry, agriculture, wood u.v.m. with textile plies, coated on one side, underside of fabric! -New, endless welded, 2-ply reinforced, with Central wedge guide rail on the underside, grooved profile 8 mm x 12 mm wide! -Dimensions: 7480 mm x 300 mm width x thickness mm 2 with 26 piece PVC T studs 30 mm high x 240 mm long (edge distance 30 mm each), obliquely set, -Band will be shipped with UPS! On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Additional versions, with pimples, Stollen or structured surfaces available. Not is your de ...

size 700 x 1020 mm R26060/18 SAKURAI Siebdruckmaschine model: SCA 102 age: 1989 max. printing size: 700 x 1020 mm available: immediately automatic screen printing line, high speed cylinder special: min: 500 x 350 mm sheet transfer unit optical leading edge control mechanicaldouble sheet control PERFECTION high-performance dryer 1120/4: infeed 1100mm, 2 warm – and 2 cooling zones with UV-dryer MIRUS sheet stacker model SV etc. Available: sofort

Preliminary operating machine for year QIV/2013, 100 operating hours Basic 1530 Basic Waterjet Processing Centre 1530 Working area: X-axis 3050 mm Y-axis 1550 mm Z-axis 150 mm The abrasive water jet cutting requires the addition of a supplied abrasive cutting head. This reduces the distance between cutting head and factory tool. drives: drive side, reverse play-free linear drives in X and Y are used with stoeration-free CAN-BUS communication as well as guide well-known manufacturer. This This means maintenance and wear-free operation of the system and the long -term Drive unit X-axis is mounted on granite. Individual linear units are protected by folding beam and covers in addition to the ingress of dust and water. Accuracy: 0.05 mm / Working area Max.Speed: 15,000 mm/min Z axis German-speaking operator software for machine control Abrassiv de-sludge plant ...

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HPR260XD plasma system is suitable for use in sheet thicknesses up to 64 mm. The system delivers a high-quality cutting quality, high productivity and reliance with low operating costs. Equipment: ? CNC control system Pierce-19 with 19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HPR260XD for cutting structural steel up to a material thickness of 64 mm, hole piercing up to 38 mm, beard-free cut up to 32 mm, manual gas console ? Two three-burner autogenschraegschneidkoepfe with electrical finishing and burner attachment control for  ...

complete system from 4Jet to the edge deletion of thin film Solarzellengehoert originally, to the 2 sputtering equipment offered by us by Lakkoju H3200Randentschichtung • non-contact procedure without damage to the substrate, no micro-cracks • dry process with no grit, no chemicals, wenigerEntsorgungsvolumen, eco-friendly • effective decoating of TCO, semiconductors undRueckkontakten - 1000V-Test > 10 GOhm • no additional cleaning necessary • reproducible results • optional laser cleaning of the cut edges! • discharge layering zones can be flexible - Glastoleranzangepasst • all metal front or rear contacts (MO , Al, AG) • all major semiconductor (a-Si single junction/tandem junction, CIS, CIGS, CdTe) • all TCO layers (ITO, ZnO, SnO2) MEX molybdenum  ...

3 tube feet standing stainless steel container made of V2A, 1.4301 WSt Containers with upper edge reinforcement Manufacturer: API Schmidt-Bretten Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: approx. 1,560 mm Open top containers. Container with lower convex base on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 In very good condition!

Used standing on 3 feet of pipe stainless steel container made of V2A, 1.4301 - WSt - container with upper edge reinforcement Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: 1.500 mm Open top containers. Container with bottom cone base. on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 otherwise com. photo in very good condition!

Hydraulic C-frame press Tool testing press / straightening press Pressure power hydraulic unit approx. 400kg/cm2 Printing capacity of the press approx. 270to Partially overhauled! Hydraulic cylinder sour overhauled, recoat Table clamping area 1.300x500mm Flat of the printing plate 700x400mm Number of T-slots 2 pcs with width 22mm Piston rod diameter 290mm maximum installation height 750mm Piston path 350mm Extension C-frame to center piston 270mm Extension C-frame to front edge pressure plate 480mm Width C-frame 500mm Aeussere Dimensions Depth 1,800mm Width 1,300mm Rxvukelzy Height approx. 3,000mm Weight approx. 5to Rest according to photos Special price

with rotary tower for sieve-edge presses (except EBP350) For cleaning and grinding fruit. The pre-washing system is an absolute must for the hygienic processing of fruit. Thanks to the built-in ratz mill with interchangeable sieves, you get the ideal mash consistency for the respective pressing method. Technical data: Rated power up to 6 000 kg/h Power: Elevator 2.2 (3.0) kW (PS) Mill 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 750 mm Width 870 mm Height 2 700 mm Delivery or insertion height 800 mm Weight 420 / 450 kg Material 1.4301 / AISI 304 Connections: Connection for cleaning 1/2" inside Connection for washing container 2" outside Height mash ejection 1 730 mm / with transition 1 510 mm can be used for core fruit Scope of delivery 7, 9 and 12 mm cutting sieve

Starter air Ingerssol overtaken edge

Qty. 1 Second-hand JCO pipe welding line Mfc.: Korean Company Installation date: 11 - 2008 Production types: KS, JIS, ASTM, API, Material: API 5L. 2B.X-80under mild steel Product capacity: 70,000 ton/year Product size O.D.: 406 – 1676 mm - 16”~66” Length: 5~16 m Wal Thickness: 9~80 mm Voltage supply: 440 V or 380 V, 220 V, 60 Hz Manufacturing process: Plate stacking Edge Milling Pre Bending Press Forming Tack Welding Welding Calibration Machining Pipe Ends Hydro Static Test NDT (RT & UT)

Manufacturer: Expert Systemtechnik GmbH Make: cutEXPERT Type: Variojet Year of manufacture: 2009 Features: single table with the dimensions: length = 6500mm; Width = 3300 mm; Height = 1850mmGewicht: 1500kg Power consumption: 7,0 kW Cutting head number 2 manufacturer: AllfiType: V high SpeedHochdruckpumpe : Manufacturer: UhdeTyp: HP19/37-SBaujahr: 2009 Capacity 3, 8 l / min Design pressure: 4000 bar Motor power: 37kW Weight: 1450kg Single table, work room (cutting edge) dimensions: Length = 2200 mm; Width = 1300 mm; Height = 200 mm Special features: · Programmatically, motorized adjustment of the head distance. No tedious, manual adjustment necessary. Minimization of set-up time and avoid errors · Machine designed for high workpieces (up to 200 mm). Ideal for the cutting of foam materials. · Ergonomic software: simple and very fast creating of cutting programs, tak ...

CA 1962 Rotation slot - and die-cutting machine, strength of cardboard: 0,5-4 mm, thickness of the corrugated board: 3-7 mm, capacity (speed): until 3600 single cuts per hour, slots and booklet edge at side performed in a single pass, soil or cover can in one Operation individually, and with Zentralo cut twice, produced, additional delivery one cutting and creasing device can corrugated cardboard in a single punched, slotted, and grooved in one direction and cropped, automatic Waste ejection device, line 5301, Max: 1300x1200mm, min: 250 mm, 3600/hours

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer : roundtable / turntable diameter : 800mm / 1000mm/1200mm/1400mm/2000mm electrical : 230 VAC / on request 400V/3ph - Legs adjustable - Stainless steel construction - Speed control with frequency converter - CE confirmation - Manual and electr. draw - driven with geared motor - edge high 30mm The base frame has a support for the lift truck transport I offer this machine in NEW condition Round table in Stainless steel Ø mm Round table 800 Round table 1000 Round table 1200 Round table 1400 Round table 2000 Example fotos, with additional parts

Bearing platform 4,000 x 15,000 mm, load capacity 500 kg / m2 Included in the scope of delivery are: 4 stands, one side 100 x 100 x 3 mm 4 stands, double-sided 100 x 100 x 3 mm 6Main carrier C+300 x 3 x 4,190 mm 15 cross member S+300 x 2 x 4,800 mm 30 Mounting angle 4 Cross Associations 27 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural UK white, OK nature incl. fastening material incl. load signs Dimensions, technical data Steel construction: 4,000 x 15,000 mm Floor area: approx. 60 sqm Height top edge floor covering: up to 3,500 mm freely selectable ( other heights on request ) light height underside: OK minus 338 mm Capacity: 500 kg / m2 Columns: 100 x 100 x 3 mm Main carrier: C-Profile C+300 x 3 mm Cross member: Sigma profiles S+300 x 2 mm Flooring: 38 mm chipboard, white on one side Columns in the following standard colors: Ral 7035,  ...

Complete Line Consisting of 1.Sheet material unwind station (let off stand) 2. Iddon 1320mm x 450mm dia wide 4 roll inverted L calender manual nip adjustment, even speed gears, auto lubrication system with 45kW AC right angle drive motor and gearbox, Steam heated bowls up to 150c Bowl temperature monitoring system, fabricated bedplate. Overhauled in 2007 (by Iddon) with new side frame and rolls precision ground 3. Edge Trim - make: Mario Cotta 4. Guillotine - Make: Pasquato SNC 5. Wind up

Control SIEMENS 805 TECHNICAL DATA: WORK AREA / DIMENSIONS Swing over bed [mm] 820 Swing over facing slide [mm] 515 Displacement of the plan slide [mm] 520 Displacement of the upper support [mm] 250 Turning length [mm] 2000 Tip height on flat railway [mm] 400 Bed width [mm] 560 Bed sleigh length [mm] 800 Facing slide width [mm] 320 Plan valve length [mm] 1005 Upper support width [mm] 200 Turning tool cross section according to DIN 770 hxb [mm] 40 x 25 MAIN SPINDLE Spindle nose according to DIN 55 027 [Gr.] 11 Spindle diameter in front bearing [mm] 170 Spindle bore [mm] 128 Inner taper of main spindle [metr.] 136 MAIN drive infinitely adjustable three-phase motor (AC motor) Power 60% / 100% ED [kW] 46/37 Torque max 60% / 100% ED [NM] 5,300/4.260 Torque max 60% / 100% ED [NM] 5,300/4.260 Total speed range [min-1] 6.3 1,600 Transmission levels 2 Speed rang ...

LOCATELLI- model BIG-ARIETE- Hi production- automatic copy lathe fully hydraulic cycles and tooling advances: automatic hopper feeds squares or round blanks Station #1...blank is advanced...first trim knife trims to blank to fit thru hollow chuck Station #2...(1) roughing knife follows template...to rough to basic shape Station #3...(1) finishing knife makes the first finish cut Station #4...(1) finishing knife (set slightly deeper) makes finish cut Station #5 & #6 end boring or shaping the outer edge (if needed) Station #7...(1) parting tool ...mills the finished part off the blank finish part drops.head stock advances to scheduled stop ...cycle continues 400+ parts per hour are possible complete with lots of tooling and various size steady rests

1 KUSTERS 2-bowl rolling calender type 212.70-3200, 3200 mm Working Width (3400 mm face roller width), year 1993, top bowl chromed steel (thermal oil heated) diameter 450 mm, bottom bowl Racolan (S-roll) diameter 500 mm, Pressure 300 Newton/mm = 96 tons, maximum speed 100 m/min., maximum heating temperature 250 ºC, entry with metal detector, ELECTROTEX seam detector with automatic seam passage, exit by A-frame contact winder max. 1800 mm diameter, blower for cooling the bottom roller, water cooling system for edge of racolan sleeve, cooling rollers before exit, machine is controlled through SIEMES PLC, electronic speed control through MENTOR II digital drive, voltage 380V, 50 Hz, machine supplied with spare racolan sleeve and technical documentation

Vickers hardness tester of the extra class Modular design - as stand alone hearing tester or as a fully automatic machine. cheapest fully automatic machine worldwide As a full automatic incl. - 6-fold turret - 5 MP camera - 2 lenses (2 more optional) - motorized XY table - Overview camera - first-class hardness testing software IMPRESSIONS - incl. automatic hardness course CHD, NHT, RHT - additional software - modules for 2D / 3D mapping, screw testing ISO898, edge finishing, etc. - motorized lifting spindle - Autofocus, auto brightness + contrast ... This is THE quality machine at a fair price request now without obligation!

automatic baling press Manufacturer: PAAL Type: KONTI 275 F Built: 2007 Main parts of the press: 1 automatic duct press (without wire winding devices) 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force: 800 kN / 80 t at 300 bar Specific pressing force: 9.70 kg/cm2 Channel cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,600mm Number of connecting wires: 4 pieces vertically Drive power: Main pump: 1 x 45 kW Pump delivery capacity: 1 x 380 l/min Throughput: up to approx. 280 m3/h under operating conditions Performance at: - 35 kg/m3 bulk weight: approx. 9.5 t/h - 60 kg/m3 bulk weight: approx. 16.5 t/h - 100 kg/m3 bulk weight: approx. 26.0 t/h Hydraulic oil tank volume: 2,100 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other equipment: Operator Panel MP 270 auto ...

Size max 220 x 297 mm Speed max 2.700 c/h Equipment o automatic feeder o 2 cutting stations o 3 edge corner cutting station o delivery ; working condition

working width: a) single lane: max. 2100 mm b) double lane: 2 x 902 mm number of length wire: max. 12 distance of cross wire: 6\", 12\", 18\", 24\", 30\", 36\" distance of length wire: 1/2\" to 1/2\" wire diam. length wire: max. 2,5 mm wire diam. edge wire: max. 3,0 mm wire diam. cross wire: max. 2,5 mm wire diam. knot wire: max. 2,75 mm; ready for operation

Horizontal baler Manufacturer: MEPAC Type: 30-18 Operating hours: approx. 10 Built: 2014 technical data: Pressure: 220 kN/22 to Filling opening: approx. 1,500 x 900 mm E-connector: 7.5kW 400V 50Hz, 3 Ph/N/PE Connection: CEKON plug 32A Bale dimensions: 970 x 770 x approx. 1,150 mm (W x H x L) Bale output height: 200 mm from the ground Bale weight: up to approx. 450 kg depending on material and length Machine dimensions: approx. 5900x1700x2000 mm (L x W x H) Machine weight: approx. 2000 kg Colour: light blue according to RAL 5012 Execution with: - hyrdaulian front door and - 2 pieces of hydraulic lids for closing the filling box - Binding by hand with polyester tape Description: Stable all-steel welded construction with edge profiles in a compact design. Robust electro-hydraulic, maintenance-free drive ensures easy and effo ...

pressure:200 t distance between columns:2900 mm stroke:800 mm dimensions of the machine ca.:3300 x 2700 x 3100 mm Table dimensions:2500 x 2000 mm :4000 mm :33 mm/sec :33 mm/sec distance table - lower edge of ram:1100 mm table height over floor:750 mm :2300 mm return capacity:25 t total power requirement:15 kW Oil Cooling:1 kW stroke speed:18 mm/sec down speed:2 - 10 mm/sec :200 l table plate:100 mm distance between columns:2400 mm open height:1000 mm weight:9 t Table Height:750 mm :34 Lt./min. Impact leper extension removable (200 mm long):550 ? Table top flattened, with or without T-slots:7900 ?

Working width: 2,000 mm Number of laengsdrahte: max. 16 Shot wire spacing: 6, 12, 18, 24 or 36 Wire wire spacing: 1/2 to 1/2 Wirestaerke Laengsdraehte 2.5 - 3.25 mm Wirerodedge edge dandinehte max. 4.0 mm Wirestaerke Shot Draehte max. 3.25 mm Wirestaerke Knotdrae max. 3.25 mm

Manufacturer: Neolt Model: Electro Power Trim PLUS 250 Year: 2003 equipment: - electric rotary cutter with rotating circular knife - Cutting thickness up to 1.6 mm - Triggering of the cutting process by hand contact strip or foot pedal - Transparent pressure rail with which the material to be cut is held during the cutting process is automatically pressed - Illuminated cutting edge - Collection bag for clippings - Connection: 230 V/ 50 Hz - Dimensions: 2,950 x 500 x 1,050 mm (WxDxH) - Weight: approx. 100 kg Ideal for cutting paper, pop-up and other displays, laminated Printing, banners, tarpaulins and self-adhesive foils. The device works and was used very little. Availability: In stock Defects: none Price: on request

working width: 2.000 mm number of line wires: max. 16 distance of cross wires: 6\", 12\", 18\", 24\" od. 36\" distance of length wires: 1/2\" to 1/2\" wire diam. length wire: 2,5 - 3,25 mm wire diam. edge wire: max. 4,0 mm wire diam. cross wire: max. 3,25 mm wire diam. knot wire: max. 3,25 mm; ready for operation

Gastro Griddle plate with cabinet Gastro grill plate Griddleplate Cabinet with 4 countertop with 4cm edge Mass: HxBxT= 87x170x97cm Formore items can be found in our shop.

Description mobile height-adjustable Gura scissor roller conveyor 1200-425 2KUX from year 2009 Scissor roller conveyors are used in all areas of general cargo transport in operation. Especially when a permanently mounted system is not desired, this mobile variant is used. Own logistics structures can thus be optimally adapted and expanded as desired. The tracks are individually adjustable in length and height, at the same time curves up to 180 can be formed. – gloss-galvanized version – web top edge from 720 – 1150 mm height-adjustable. – For conveyed goods up to 425 mm – Axle distance with extended web 150 mm. – Rollers ( 50 mm) ball bearing on 8 mm axes – End stop at the end of the roll Number of support feet 3 pieces (+one extension) Web length 1600 – 5500 mm Load capacity/support foot distance 100 kg Roll material Plastic Rolls per axle 2 pieces Roller design Plastic

The ZAKMET FIRECUT CNC 1325 13000 X 2500 gas plasma cutter was produced in 2011. The machine is equipped with Hypertherm EDGE'Pro digital control. The burner's working area is 13,000 mm long and 2,500 mm wide. The running elements of the cutter are lubricated with the Memolub 3.0 central lubrication system. Technical data of the plasma burner: - machine working area (L x W x H): 13,000 x 2,500 mm (additionally 700 mm) x 200 mm - maximum table load: 15 kN / m2 - machine supply voltage: 3x400V AC 50 Hz - central lubrication: Memolub 3.0 - minimum temperature of the working environment: +5 degrees C - maximum temperature of the working environment: +60 degrees C - machine dimensions (L x W x H): 14500 x 5500 x 2000 mm Plasma cutter equipment: - CNC control: Hypertherm EdgePro - ventilated section table: 1550 x 2600 mm - 9 segments - gas burner: type MS 3452 \ 250-PM (x2) - ...

Resonance screening machine, Screening machine, Vibrating screen, Linear screening machine used Manufacturer: Binder + Co AG TYPE: SL1000GX.6.7 Year of construction: 1999 Sieve: 2 levels each approx. 4.2 x 0.9 m Upper level: Longitudinal grid with approx. 13 mm distance Lower level: plastic screen with approx. 9 x 9 mm mesh size Insertion height approx. 1.5 m Dimensions without drive approx. 6800 x 1700 x 1800 mm Resonance screens are used in the dry and wet screening of round and edge grain as well as leafy materials. They work according to the throwing principle. This machine was used in a glass recycling plant. Changes and errors in the technical data, information and prices as well as prior sale reserved.

Work table with round front edge length 4,0 m fitted with the following devices: CERAN induction stove without oven, hotplates 4 x 3, 5KW inductive Connected load: 400V 14,0 KW electric Grill Pan Pan: 500x500x100mm, content: ca 24 litres

Vertical Bevel-Cutting Machine Manufacturer: Hyma Model: VSL.A.75 Manually operated roller table with aluminium covered table-too Hand-wheel operated rest-plate with ratchet mechanism for repetitive cutting of same width: 0-130mm Inclinable cutting section with four dynamic balance blade-wheels, each suspended between two adjustable bearings Motorised angle-adjustment for cutting section: +/- 60 degrees. Electric blade drive motor Twister double-edge ground bank knife for cutting in forward and reverse movement of roller table Blade tension control with indication lamp and automatic cut-off on blade slackness and breakage Manually height-adjustable blade guard and fine-adjustable blade guide rollers above and below table Friction grinding apparatus with two adjustable cupstones Electrical control box mounted on table front, adjacent to operator Standard dimensions: Cuttin ...

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Hydr. Universal Cylindrical Grinding Machine WMW SU 240×800 manufacturer: WMW SU 240×800 build type: Reinecker type: SU 240×800 mach.-nr.: 02910 year of construction: ? comm.-nr.: 3990699/009 stock-nr.: 1865 + Regular Price: 5.800,- € > Reduced Price: 2.900,- € BN + All prices are shown without taxes (net price) The machine can be used for: outer grinding surface grinding cone grinding edge grinding chamfering plunge grinding Technical Data (According to manufacturer) height of tip: 120 mm swing – Ø: 240 mm width of tip: 800 mm grinding wheel: diameter: 300 mm bore diameter: 76 mm max. width of full grinding wheel during ...

capacity: 250 EURO pallets / h Presently equipped for EURO pallets 1200 x 800 mm short side leading as well as for half pallets 600 x 800 mm. Pre-Treatment: Cleaning of the pallets through a rotating brush Inspections: Roller pressure check for deck and running boards for detection of missing or broken boards and the pressure resistance of the blocks Check of the pallet width, length and height Block scanning of the inner and outer blocks from both sides for completeness Edge zone check of the deck and running boards‘ outer edges from the top and the bottom for damages and dimensional accuracy Fork clearance Deflection and nail connection check Sorting of the checked pallets according to quality criterias (3 criterias: damaged pallets, usable pallets and pallets suitable for high rack storage) After-Treatment: Usable pallets and pallets suitable for  ...

Many thanks for your interest on our new cooling table for chocolate or sugar-, candydough, please find follow our offer: cooling table / working table for sugar or chocolate mass Dimensions (lxbxw) : 2000 x 1500 x 750mm Or : 2500 x 1000 x 750mm (after customers request we are able to produce other dimensions) Execution completely in stainless steel: - folded plates made of stainless steel - Standing on 4 feet, (square tube 80 x 80 x 5) - foldable edge from square tube 40x40, - 1 x safety valve 0.5 bar) - 1 x Pipes for water circulation I offer this machine as New machine

M. No.: 13-6-193497 // Ser.No. : 985286 // Power : 3000 – 10`000 B / h Format (cm): A3+ Equipment / Additional information: Printing area: 297 mm x 420 mm Sheet sizes: min. 55 x 75 mm max. 315 x 445 mm Paper weights: 30 - 400 g / m2 Gripper edge: 8mm Sheet feed system: Suction feeder Paper delivery system: chain delivery including powder applicator and air shower Ink rollers: 2 applicator rollers 11 distributor rollers Dampening unit: Integrated inking / dampening system Electric connection: 220 V, 50 Hz, 16 A