eccentric press used for sale

- Dimensions of the work table approx. 2200 x 1200 mm. - Maximum workpiece dimensions approx. 1950 x 1000 mm. - Perforations in the table every 60 mm in the 2 directions. - 5 positionable hydraulic clamping cylinders. - 1.50 KW-1400 rpm hydraulic pump. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-95

Electric Powered Hydraulic Pump Reservoir 20 liters Hydraulic components from Holmatro Auction-ID: A1-47366-285

working width 3200 mm Extension 220 mm Retraction speed 125 mm/sec. Printing speed 60/14 mm/sec. Stroke 110 mm. Oil pressure 225 bar Auction-ID: A1-47366-36

The electronic digital tire pressure gauge is a modern device that allows you to quickly and accurately check your car's tire pressure. Auction-ID: A7-50796-39

An air dryer with filter and regulator, equipped with a standard 1/4\" air inlet connection. The device is designed to purify the incoming air from most liquid and solid particles. It is equipped with a pressure regulator that allows precise adjustment of the outlet air pressure, from 0 to 150 PSI. Auction-ID: A7-50796-62

The electronic digital tire pressure gauge is a modern device that allows you to quickly and accurately check your car's tire pressure. Auction-ID: A7-50796-139

Mobile high-pressure water mist fan (extinguishing fan) Specifications: Type: Mobile High Pressure Water Mist Fan Fan drive: hydraulic Application: Smoke & Heat Extraction, Water Mist Dispersion, Fire Suppression & Refrigeration Features: Large hydraulically driven fan Hose for water supply Front spray nozzle for spreading a fine water mist Particularities: Technical condition and operation not specified. Auction-ID: A1-47394-196

Pressure 20 bar, max flow rate 360 l/h, never used Overall dimensions: 300 x 300 x 700 mm Weight: 10 kg Auction-ID: A7-50796-355

Pistol grip with 30 cm rubber hose with grease fitting Foot lever Steel drum cover Steel bucket with 6 liter capacity 180 cm high-pressure rubber hose Auction-ID: A7-50796-149

CONTROLS   PLC SIEMENS S7-400 PRESS DESIGN   drive system: hydraulic   number of suspensions: 1   slide ejectors / cushion: no   table cushion: no   opening in table: no   feedstock transport direction: back-front PRESS FORCES   total force (nominal): 1000 to PRESS TABLE   table surface (left-right): 2066 mm   table surface (front-back): 2000 mm   height above floor level: 630 mm SLIDE   stroke: 900 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 600 mm/s   working velocity min.: 15 mm/s   working velocity max.: 40 mm/s   return velocity max.: 390 mm/s   return force: 100 to TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1710 mm   distance table - slide max.: 1700 mm ELECTRICAL SPECIFICATIONS   total power consumption: 160 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   height above ...

CONTROLS   PLC SIEMENS S7 300 PRESS DESIGN   drive system: hydraulic PRESS FORCES   total force (nominal): 800 to PRESS TABLE   table surface (left-right): 2000 mm   table surface (front-back): 2000 mm   height above floor level: 700 mm SLIDE   table surface (left-right): 2000 mm   table surface (front-back): 2000 mm   stroke: 900 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 400 mm/s   working velocity min.: 5 mm/s   working velocity max.: 160 mm/s   return velocity max.: 300 mm/s TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1700 mm   distance between columns (H-frame): 2100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 370 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 81000 kg ATTACHMENTS (PRESSES)   press automation: yes   gripper transfer system ...

PRESS DESIGN   quick die change system: yes SLIDE   total force (nominal): 100 to   stroke: 20 mm   stroke rate (max.): 80 /min TOOL DIMENSIONS   lower table (left-right): 430 mm   shut height max.: 220 mm Approx. 79 million strokes

CONTROLS   PC controller BECKHOFF PRESS DESIGN   drive system: servohydraulic   frame design: H-frame, tie rod   quick die change system: yes   feedstock transport direction: left to right SLIDE   total force (nominal): 1100 to   stroke: 130 mm   stroke rate (max.): 60 /min COUNTER RAM   nominal force: 330 to   stroke: 40 mm V-RING   nominal force: 500 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 960 mm   lower table (front-back): 960 mm   upper table (left-right): 960 mm   upper table (front-back): 960 mm   shut height max.: 470 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 16 mm   coil weight max.: 8 to   feedstock transport direction: left to right COIL CHAIR   coil weight max.: 8 to   stroke: 700 mm DECOILER   coil weight max.: 8 to   max. diameter of coil: 1800 mm   m ...

PRESS DESIGN   drive system: hydraulic SLIDE   total force (nominal): 40 to   stroke: 45 mm   stroke rate (max.): 110 /min TOOL DIMENSIONS   lower table (left-right): 300 mm   lower table (front-back): 280 mm   shut height max.: 90 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1835 mm   space requirements -front/back-: 1500 mm   total height: 1800 mm   total weight approx.: 2500 kg

SLIDE   total force (nominal): 40 to   stroke rate (max.): 110 /min TOOL DIMENSIONS   lower table (left-right): 300 mm   lower table (front-back): 280 mm   shut height max.: 180 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1835 mm   space requirements -front/back-: 1500 mm   total height: 1800 mm   total weight approx.: 2500 kg

SLIDE   total force (nominal): 80 to   stroke rate (max.): 120 /min V-RING   stroke: 90 mm TOOL DIMENSIONS   lower table (left-right): 420 mm   lower table (front-back): 420 mm   upper table (left-right): 420 mm   upper table (front-back): 420 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 2970 mm   space requirements -front/back-: 1665 mm   total height: 242 mm   total weight approx.: 6000 kg

CONTROLS    SIEMENS SIMATIC PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 160 to PRESS TABLE   table surface (left-right): 1200 mm   table surface (front-back): 970 mm SLIDE   stroke rate (max.): 90 /min SLIDE (MECHAN. PRESS)   slide adjustment: 120 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3200 mm   space requirements -front/back-: 1600 mm   total height: 4400 mm   total weight approx.: 32000 kg

CONTROLS   conventional PRESS FORCES   total force (nominal): 160 to PRESS TABLE   table surface (left-right): 1000 mm   table surface (front-back): 850 mm SLIDE   stroke: 705 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1205 mm Machine hours: 78571

CONTROLS   PLC SIEMENS SIMATIC OP 47-12 PRESS FORCES   total force (nominal): 200 to PRESS TABLE   table surface (left-right): 2440 mm   table surface (front-back): 1500 mm SLIDE   table surface (left-right): 1500 mm   table surface (front-back): 1100 mm   stroke: 180 mm SLIDE (MECHAN. PRESS)   slide adjustment: 150 mm   stroke rate (min.): 20 /min   stroke rate (max.): 120 /min   main drive power: 45 kW OVERALL SPECIFICATIONS (COIL LINES)   sheet thickness max.: 2.5 mm DECOILER   sheet width max.: 300 mm   sheet width (min): 30 mm   coil weight max.: 3 to   max. diameter of coil: 1500 mm   mandrel expansion range from: 460 mm   mandrel expansion range up to: 530 mm LEVELLER UNIT   sheet width max.: 30 mm   sheet width (min): 300 mm   number of leveller rolls: 9   diameter of leveller rolls: 30 mm   number of intermediate rolls: 11   feed  ...

Factory Number 056-005/1 Machine Type Hydraulic Single-Column Press Press Force 1,600 kN / approx. 160 t Table Size 900 × 630 mm Ram Surface 750 × 450 mm Max. Installation Height / Opening 800 mm Min. Opening 300 mm Ram Stroke 500 mm Hydraulic Pressure 160 bar Connected Load 11 kW Connection Voltage 400 V / 50 Hz Control Voltage AC 230 V Rated Current 24 A Supply Line Fuse 50 A CE Marking

PA 30 ist eine Pneumatische Presse, ausgelegt auf Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsfähigkeiten: Hublänge 35 mm; Ausladung 61 mm. Hauptspezifikationen: Hublänge 35 mm, Tiefenmaß 61 mm. Erreicht enge Toleranzen; typische Einsatzbereiche: Automobil, Uhrmacherei, Werkzeugmaschinen, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

USED NOVAXESS SPRINKLER UNIT TYPE HP70B PRO WITH OIL COOLING Serial No.: 6694 Year: 2018 Equipped with 1 HP 70 bar pump with flow rate 30 liters/minute 1 930 liter oil tank 1 Hydraulic lifting kit 1 Duo of cartridge filters mounted 90μ + 10μ series 1 Hyfra cooling unit type Gama 13 Dimensions and weight 2500x1100xH1600 mm - weight 450kg Auction-ID: A1-50950-60

Additel 681 20 Bar Digital Pressure Gauges; ; Pressure Range: 0 to 20 Bar (300Psi); Accuracy: ± 0.2% FS; Surcharge: 24 Bar; Media: Gas/Liquid (GL); ; Internal reference: FA-1297; Auction-ID: A1-50994-1149

USED PROMECAM PRESS BRAKE 35T Year: 1986 Serial No.: T2 035 20 440 Power: 350 KN (35 Tons) Bending Length: 2000 Passage Between Upright: 1700 Maximum Stocked: 105 Equipped with 1 Electric Stop 1 MBC Programming Controller 1 Bending Lot V Dimensions and Weight 3350x2100xH1750mm - Weight: 2500 kg Auction-ID: A1-50950-64

Used LBM BR101 PRESS Serial No.: 10838 Max ram speed: 440 mm/s Slide stop time: 18 ms Max. ram stroke: 200 mm Max force: 10000 daN (10 tons) Dimensions and weight 1300x1000xH2450mm - weight 1500kg Auction-ID: A1-50950-36

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed: Highly resistant to torsional forces, of ample size ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic downstroking drive with 4-cylinder technology ⦁ Modern block hydraulics with control valves mounted on the cylinder ⦁ Electronic pressure balance ⦁ Measuring system ⦁ Control panel with LCD panel, footswitch für Emergency up, down and E-STOP ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design Backgauge system ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Manual upper tool clamping ⦁ Hydraulic lower tool clamping Crowning ⦁ Manual crowning Lower tool shifting ⦁ Lower Tool Adjustment Safety ⦁ Standard Safety equipment: Emergency Stop button, manual roller shutte ...

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic downstroking drive with 4-cylinder technology ⦁ Modern block hydraulics with control valves mounted on the cylinder ⦁ Electronic pressure balance ⦁ Measuring system ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design Backgauge system ⦁ Backgauge system 2-axes Tool holder ⦁ Manual upper tool clamping ⦁ Shifting: programmable Crowning ⦁ Manual crowning: Integrated in the table, manual adjustable crowning via wedges Lower Tool Adjustement ⦁ Lower tool adjustment CNC, programmable Safety ⦁ Standard Safety equipment Control ⦁ TRUMPF TASC 6000 Operation ⦁ Communication Track  ...

Working width: 3550 mm Working height: 2550 mm Number of cylinders: 5 St. Hess Quickstep Frame Press ---------------------------------- Summary of Technical Specifications (Please inquire regarding any additional accessories that may be included) --------------------------------------- General --------------------------------------- Working width: 3550 mm Working height: 2550 mm - Siemens S7-1200 control system (replaced in 2024) PLC control for automated pressing cycle, (optional: configurable for specific pressing cycles, such as for counter-dowels or mortise-and-tenon joints) manual control mode also available - Hydraulic power unit and hoses replaced in 2024 Features: --------------------------------------- > Hydraulic: Yes > Number of vertical pressing cylinders: 3 > Number of horizontal pressing cylinders: 2 > Vertical adjustment method: Electro-hydraulic (long-stroke cylinders) >  ...

pressure: 300 t passage width: 2050 mm stroke: 1200 mm total power requirement: 55 kW weight of the machine ca.: 55 t dimensions of the machine ca.: m Hydraulic Try-Out Press (Four-Column Press) Pressing force: 3.000 kN Maximum slide stroke: 1.20 mm Table size: 2.050 x 1.300 mm Distance between columns: 2.050 mm (long side), 700 mm (short side) Maximum distance from mounting surface to slide: 1.350 mm Minimum shut height: 250 mm Power requirement: 55 kW Tank capacity: 1.200 l Total weight: 55.000 kg Press height: 5.800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 17700 € : 339.84 € : 100 to : fix : 300 mm : 680 mm : 1520 mm : 8 mm/s : 5 mm/s : 10 mm/s : 500x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2350 mm : 2500 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand control table height adjustable according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 21500 € : 412.8 € : 150 to : fix : 300 mm : 610 mm : 1520 mm : 9 mm/s : 5 mm/s : 10 mm/s : 600x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2470 mm : 3200 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand control table height adjustable according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 5500 € : 106.15 € : 30 to : fix : 775 mm : 5 mm/s : 10 mm/s : 1500 mm : 700 mm : 2015 mm : 400 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

• Pneumatic press • Table dimensions 125 x 125 mm • Actuating by pedal • Operating conditions of this machine: unchecked. • Transport dimensions approx. 1200 x 800 x 600 mm. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-118

HAN10R press container from 2016. The press was only used for paper/cardboard and was not outdoors most of the time. It is therefore in good condition. The press is equipped with an electric swivel lid. At the push of the head, this opens, you throw the waste into the press and press another button. Then the swivel lid closes and the press is started. The two rails in front of the insertion should only prevent the disposal of cardboard boxes that are too large. These can be unscrewed. The entire drum housing can be removed by loosening 8 screws. Then the press can be used normally. The press has published a current UVV of 22.09.2026 We will be happy to answer any further information. The press must be picked up in 58730 Fröndenberg. The sale is exclusively to commercial buyers. The price indicated is a net price (exw).

3 x Trumpf bending machines (hydraulic press brakes): • TrumaBend V50 | Year of manufacture 1997 • TrumaBend V85 | Year of manufacture 1997 • TrumaBend V85 S | Year of manufacture 2001 Condition & Maintenance: As can be seen in the attached pictures, all machines were fully serviced as part of the annual UVV inspection. The last inspection took place for all plants in the summer of 2026. The machines are currently still in ongoing production operation and are fully operational.

Hammelmann HDP 164 Pompe Pression : 2 400 bars Débit : 35 l/min Moteur : Volvo Penta Différents accessoires disponibles : pièces détachées, tuyaux, câbles, arme, etc. Machine toujours entretenue et surveillée Factures d’entretien disponibles Équipement prêt à travailler

Auction-ID: A1-50846-312

• Lot of 4 manual die press • Piston diameter approx, 38 mm Auction-ID: A7-50834-617

Dowel and slotted hole drilling machine GANNER JUNIOR 320 LBM very good condition, as good as new, the machine comes from a small carpenter's shop and was used there very little This allows slotted holes to be milled and dowel holes to be drilled in 2 planes without reclamping 380V, 1500W Speed: 2800 rpm Year of Make: 1990 with the machine you can mill slotted holes for e.g. lock cases and similar things or make all kinds of frame and dowel connections, at right angles, blunt and mitred ideal for the production of dowel joints in timber frame construction, furniture, doors, windows and stairs construction and for similar things by drilling on 2 levels, by the grids and stops and by the construction of the machine, dowel connections are made in the shortest possible time, which makes the machine very economical the machine requires a compressed air connection of 6bar (the air  ...

Technical data Maximum pressure: 16 tons Power connection: 400V / 4kW Press force: 2.08 kg/cm² Year of Make: 2006 Bale size: 1100x700x800 mm Productivity: approx. 3 bales/hour Bale weight: approx. 150-250 kg Machine is fully functional after technical supervision.

Maximum permissible pressure: 3.0 bar / 0 bar and 0 / –1 bar, Permissible temperature: 0 °C to +40 °C, Test pressure: 3.3 bar, Test medium: compressed air. Auction-ID: A1-50340-81

Technical data Maximum pressure: 54 tons Power connection: 400V / 7.5 kW Pressing force: 5.62 kg/cm² Year of Make: 2004 Bale size: 1200x800x1200 mm Productivity: approx. 2 bales/hour Bale weight: approx. 500 kg Bale tying only with wire Machine is fully functional, after technical inspection and after renovation

General Description High-speed mechanical stamping press manufactured by JELŠINGRAD under licence from Hermann Raster KG, Germany, model BPA-75 . Heavy-duty press designed for high-volume progressive-die stamping, punching and blanking from coil. Technical Details Manufacturer: JELŠINGRAD Model: BPA-75 Year: 1985 Serial number: 8510917 Nominal pressing force: 750 kN / 75 t Stroke rate: Infinitely variable 120–600 strokes/min Ram stroke: 10 / 50 mm Working hrs: aprox. 13000 Ram adjustment: 80 mm Maximum daylight: 400 mm Table: 1,250 × 750 mm Distance between uprights: 730 × 620 mm Maximum strip width: 300 mm Strip feed height: 100–130 mm Feed length per stroke: 5–15 mm Motor power: 15 kW Power supply: 3 × 380 V, 50 Hz Air clutch and brake Compatible with pneumatic strip feeding equipment, which is installed on machine Electrical cabinet and controls inc ...

Technical data Maximum pressure: 50 tons Power connection: 400V / 4 kW Press force: 5.2 kg/cm² Year of construction: 2013 Bale size: 1200x800x1100 mm Productivity: approx. 2 bales/hr Bale weight: approx. 500 kg Price: on request Machine is fully functional, after technical inspection and after renovation

- Strength 2700 kg. - Pedal actuation. - The table on which it is resting and a manual rectangular hole punch are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-611

Technical data Maximum pressure: 20 tons Power connection: 380V / 2.2kW Pressing force: 2.6 kg/cm² Productivity: approx. 6 bales/hour Bale size: 1100x700x800 mm Price: on request Bale weight: approx. 200 kg Year of Make: 1991 Machine is fully functional, after the technical inspection.Price also includes the paint renovation

1000ml capacity 5 bar design pressure 50°C design temperature Auction-ID: A1-50846-52

Key data: 100 t

Manufacturer: Hidroliksan Model: CFSS 100t Year: 2022 Condition: Used Stock number: 9614 Operating hours: 800 h Compressive force: 100 t Table length: 800 mm Table width: 500 mm Stroke: 400 mm Machine height: 2930 mm Machine length: 1600 mm Machine width: 1700 mm Machine weight: 6000 kg

1000ml capacity 5 bar design pressure 50°C design temperature Auction-ID: A1-50846-51

Code: 0499 Brand: COMAFER Model: DINAMIC 70/60 - CE Standard Hydraulic briquetting machine for compacting sawdust and wood shavings, for joinery workshops, furniture, bespoke furnishings, wooden joinery and other applications – CE Standard Technical data: The advantages of briquettes are: Twice the calorific value of wood Almost no residue after combustion Much cleaner boilers Briquette diameter 65 mm Output 30/80 kg Pump motor 7,5 Hp Wood chip hopper diameter 1000 mm Overall dimensions mm 1100 x 1800 x 1650 h Weight kg 800