eccentric press used for sale

for soft doughs

General SKU400X1196 LocationBarneveld CEcheck Pressure Working pressure3 Bar Main Features MaterialStainless steel Volume5000 Ltr. Motor1.5 KW Specified Features - Eccentric Screw Pump PumpProgressive cavity pump / eccentric screw pump Number of pumps:1 Capacity0.50–5 m³/h With motor1,5 kW 400 V 1500 rpm (Pump speed: 30–190 rpm) With frequency inverter(as is) InletDN65 OutletDN65 Eccentric Screw Pumps MaterialStainless steel 1.4404, Stainless steel 1.4571 (316Ti) General MakeSeepex TypeBCSO 10-6L /J0-A7-A7-Q1-G66-X Mach.No.198504 Floorspace1,35 x 0,20 m Total height0,25 m Weight75 kgStarchOther chemicalRubberAgrochemicalsPlastic & polymersEccentric Screw PumpsFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicPaints & coatingsSeepexIndustries > Food & Feed > StarchIndustries > Chemical > Other chemica ...

General SKU221Y083 LocationBarneveld Main Features MaterialStainless steel Volume50 Ltr. Motor0.75 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity50-80 l/h With motor0,75 kW (400 V 1415 rpm (215 rpm)) InletDN25 OutletDN25 Eccentric Screw Pumps MaterialStainless steel General MakeNetzsch SerialD4095257/6300005469/0100 Year of construction2021StarchOther chemicalRubberAgrochemicalsPlastic & polymersEccentric Screw PumpsFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicPaints & coatingsNetzschIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersPumps > Eccentric Screw PumpsIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Ind ...

ECCENTRIC ROUNDER

General SKU284Y448 LocationBarneveld MakeVan Wijk &: Boerma Main Features MaterialStainless steel Volume360 Ltr. Motor0.37 KW Specified Features - Eccentric Screw Pump Capacity360 l/h With motor0,37 kW 230/400 V Inlet2x ø 23 mm Outletø 6 mm Eccentric Screw Pumps MaterialStainless steel 1.4552 General TypeNM011BH02S12F Mach.No.218768 Floorspace0,2 x 0,8 m Total height0,25 m Weight50 Extra SpecificationsInternal SKU U421StarchOther chemicalRubberAgrochemicalsPlastic & polymersEccentric Screw PumpsFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicPaints & coatingsVan Wijk & BoermaIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersPumps > Eccentric Screw PumpsIndustries > Food & Feed > ...

General SKU284Y450 LocationBarneveld MakeVan Wijk &: Boerma Main Features MaterialStainless steel Motor0.37 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 With motor± 0,37—1,1 kW Inletø 23 mm Outletø 23 mm Eccentric Screw Pumps MaterialStainless steel 1.4306 (304L), Stainless steel 1.4571 (316Ti) General Type2NL 15A Mach.No.241596 Year of construction1992 Mounted on framecheck Mounted on wheelscheck With switchcheck Floorspace1,5 x 0,5 m Total height0,75 m Weight60 kg Extra SpecificationsInternal SKU U490StarchOther chemicalRubberAgrochemicalsPlastic & polymersEccentric Screw PumpsFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicPaints & coatingsVan Wijk & BoermaIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries >  ...

General SKU291Y484 LocationBarneveld MakeMaso Main Features MaterialStainless steel Motor1.5 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 With motor1,5 kW, (400 V, 1430/139 rpm) InletDia. 65 mm OutletDia. 65 mm General TypeSPS-2,5” Mach.No.101920104 Mounted on framecheck Floorspace1,1x0,3 m Total height0,45 m Weight250 Extra Specifications3 piecesGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersEccentric Screw PumpsFeed additivesSolventsDetergent & surf.OrganicsOther pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPaints & coatingsOils & fatMasoIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Fine chemicalsIndustries > Chemical  ...

General SKU291Y498 LocationBarneveld MakeMaso Serial1210497 Pressure Working pressure15 Bar Main Features MaterialStainless steel Volume25000 Ltr. Motor7.5 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity± 25 000 l/h (25 m³/h) With motor7,5 kW, (400 V, 1440 rpm) With variable speed drivecheck Inletø 100 mm Outletø 100 mm Eccentric Screw Pumps MaterialStainless steel 1.4435 (316L) General TypeSPS 3” (Sine Eccentric Screw Pump) Year of constructionUnknown Mounted on framecheck Mounted on wheelscheck With switchgear(as is) Floorspace1,65 x 0,7 m Total height0,7 m Weight300 kgGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersEccentric Screw PumpsFeed additivesSolventsDetergent & surf.OrganicsOther pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfe ...

General SKU291Y510 MakeMaso TypeSPS 4” Mach.No.54300196 Year of constructionUnknown Pressure Working pressure15 Bar Main Features MaterialStainless steel Volume37800 Ltr. Motor11 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity37,8 m³/h With motor11 kW (400 V, 1460 rpm) With frequency inverter(max. 319 rpm) InletDia. 100 mm OutletDia. 100 mm Eccentric Screw Pumps MaterialStainless steel 1.4435 (316L) General Mounted on framecheck LocationBarneveld Mounted on wheelscheck With switchgear( as is) Floorspace1,7x0,4 m Total height1,3 m Weight500 kgGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersEccentric Screw PumpsFeed additivesSolventsDetergent & surf.OrganicsOther pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectionerySolid pharmaceuticsBevera ...

General SKU291Y519 MakeMaso TypeSPS-4” Mach.No.31260692 Year of constructionUnknown Pressure Working pressure15 Bar Main Features MaterialStainless steel Volume37800 Ltr. Motor11 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity37,8 m³/h With motor11kW, ( 400 V, 1450 rpm.) InletDia. 100 mm OutletDia. 100 mm Eccentric Screw Pumps MaterialStainless steel 1.4435 (316L) General Mounted on framecheck LocationBarneveld Floorspace1,6 x 0,6 m Total height0,6 m Weight450 kgGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersEccentric Screw PumpsFeed additivesSolventsDetergent & surf.OrganicsOther pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPaints & coatingsOils & fatMasoIndustries > Ph ...

General SKU291Y482 MakeMaso TypeSPS 4” Mach.No.89700602 Pressure Working pressure15 Bar Main Features MaterialStainless steel Volume21.78 Ltr. Motor7.5 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity21,78 m³/h With motor7,5 kW (400 V, 1455 rpm) Inletø 100 mm Outletø 100 mm Eccentric Screw Pumps MaterialStainless steel 1.4404 (316L) General Mounted on framecheck LocationBarneveld Floorspace0,50 x 1,50 m Total height0,60 m Weight380 kgGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersEccentric Screw PumpsFeed additivesSolventsDetergent & surf.OrganicsOther pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPaints & coatingsOils & fatMasoIndustries > Pharmaceutical > Generic medici ...

General SKU291Y828 MakeMaso TypeSP-2:: Mach.No.111 05 0205 Main Features MaterialStainless steel Volume1200 Ltr. Motor1.5 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity600 - 1200 l/h With motor1,5 kW (220/415 V 1465/430 rpm) InletDN50 OutletDN50 Eccentric Screw Pumps MaterialStainless steel 1.4401 (316) General LocationBarneveld Floorspace0,9 x 0,21 m Total height0,3 m Weight100 kgStarchOther chemicalRubberAgrochemicalsPlastic & polymersEccentric Screw PumpsFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicPaints & coatingsMasoIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersPumps > Eccentric Screw PumpsIndustries > Food & Feed > Feed additivesIn ...

General SKU291Y830 MakeJohnson LocationBarneveld Main Features MaterialRubber Lined Volume20000 Ltr. Motor1.1 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity± 20 m³/h With motor1,1 kW (230/400 V 680 rpm) InletDN40 OutletDN40 Eccentric Screw Pumps MaterialRubber, Stainless steel 1.4408 General Floorspace0,75 x 0,36 m Total height0,4 m Weight50 kgStarchOther chemicalRubberAgrochemicalsPlastic & polymersEccentric Screw PumpsFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicPaints & coatingsJohnsonIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersPumps > Eccentric Screw PumpsIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & s ...

General SKU291Y528 LocationBarneveld MakeAllweiler Main Features MaterialStainless steel Motor18.5 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 With motor18,5 kW 380 V 1480 rpm InletDN100 OutletDN100 Eccentric Screw Pumps MaterialStainless steel 1.4301 (304) General TypeUnknown Mounted on framecheck Floorspace3 x 0,45 m Total height1 m Weight500 kg Extra Specifications2 pumpenStarchOther chemicalRubberAgrochemicalsPlastic & polymersEccentric Screw PumpsFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicPaints & coatingsAllweilerIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersPumps > Eccentric Screw PumpsIndustries > Food & Feed > Feed additivesIndustries ...

General SKU291Y811 MakeAllweiler TypeSNZP 380.1 HX1 P11 Mach.No.7610158 Year of construction1998 Main Features MaterialStainless steel Volume167 Ltr. Motor3.6 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 With motor3,6 kW (400 V 1430 rpm (Ex)) InletDN 300 OutletDN 100 Eccentric Screw Pumps MaterialChromed steel General Mounted on framecheck LocationBarneveld Floorspace2,35 x 0,45 m Total height0,70 m Weight300 kg CEcheck Extra SpecificationsQ= 30—167 l/min, N=60—220 l/minStarchOther chemicalRubberAgrochemicalsPlastic & polymersEccentric Screw PumpsFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicPaints & coatingsAllweilerIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemi ...

General SKU315Y649 LocationBarneveld MakeIMAX T&:E TypePharma Press I Main Features Tablet Diameter14 mm Specified Features - Single stroke tablet press Single stroke tablet presscheck Tablet diameterø 2 — 14 mm With hoppercheck Capacity5.500 pill/h With motorcheck Material1.4713 (Sicromal 8 / X10CrAlSi7) General No.- Floorspace0,47 x 0,4 m Total height0,86 m Weight100 kgGeneric medicinesSingle stroke tablet pressesConfectionerySolid pharmaceuticsIMAX T&EIndustries > Pharmaceutical > Generic medicinesPresses > Single stroke tablet pressesIndustries > Food & Feed > ConfectioneryIndustries > Pharmaceutical > Solid pharmaceuticsBrand > IMAX T&E What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. ...

Weingarten Excenter Press

Used Membrane Filter Press, Chamber Filter Press for sludge dewatering Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix-Paket) Plate size: 1000x1000mm Cake thickness: 40 mm length: 5500 mm Number of Plates: 60 filter pressure: 8 Bar Membrane pressure: 15 Bar Plate transport: manuell filterclothes: optional Membranmix-Paket The machine is in a goog condition and 15 machines like this availabe.

The BTS-Bag Press is ideal for compacting your dry and wet waste into a garbage bag. Large bulky rubbish, but also recyclable materials can be compacted easily and safe to a minimum of its size. The bag compactor impresses with its ease of use and its enormous volume reduction. By compacting these waste and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 3 Ton Compaction: up to 90 % (material depending) Machine size: 1861 H x 1200 W x 630 D mm Machine weight: 325 kg Transport height: 1861 mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into bins Reduces fre ...

VERTICAL PRESSURE: 2 x 315 T, HORIZONTAL PRESSURE: 2 x 200 T, VERTICAL STROKE - UPPER PISTON: 200 MM - BOTTOM PISTON: 150 MM, HORIZONTAL STROKE: 200 MM, OPERATION PRESSURE: 280 BAR,

Ironing Pressing Line composed by In feeding Belt System Hot Press Cold Press Out Feeding Belt System

To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm Max 700 x 2,500 mm

Schubert Press The platen size is 1390 mm (52”) x 2490 mm (98”) Electric heaters Make - Schubert Daylight – 305mm Floor standing Total number of rams: 16 Ram diameter: 2 ¾” Working pressure 3500 PSI The overall dimensions are length 3850mm x width 1500mm x height 2200mm Operational The condition of the hydraulics and pump unit along with ram seals is good Spare seals maybe possible (video link available on request)

Hydraulic glue press with heating base, infinitely variable temperature setting, stuffenlose setting of the adhesive holding time, Power: 5 kW, 380 v 50 Hz; Two-hand operation.

Qty. 1 Second-hand extrusion press Mfc.: Kobe Steel Built: 1985 Force: 1500 MT Type: Horizontal 4 cylinders, indirect press, independent Control Billet dimensions: dia. 175 mm x 400 – 800 mm Length Application: Extruded?Copper?Alloys

PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM

Veneer Press Dryer Manufactured by BABCOCK Model: BDI420/12 Working Width: 4200 mm N. of Heated Sections: 6

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of the force adjustment: . . . . . . . . . . . . . . . . . Maximum opening speed: 50mm/s Approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing f ...

PressOne P1S-8 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-8 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 80 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Progra ...

PressOne P1S-10 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-10 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 100 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - P ...

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Program ...

Tool cases for press-fit machines Tool holder type Haeger (compatible) 22 press-in tools for press-fit-in contact-press-persefesters Manufacturer: PressOne - Made in Finland

pressure:15 t stroke:160 mm weight of the machine ca.:330 kg Oil tank capacity:10 l

was used to fill sugar cane molasses into containers open lubrication Dimensions 700 x 500 x 1200 mm

used cabinet press Manufacturer: HSM Type: V-Press 825 plus pro Year of construction: 2018 Machine no.: 6152.324. Series No.: 570001118 specifications: Pressing force: 25 t Filling opening: 1,195 - 540 mm (W x H) Press box dimensions - 1,200 x 780 x 1,300 mm (L x W x H) Bale size: 1,200 x 780 x max. 700 mm Bale weight: up to 280 kg Drive power: 4 kW Cycle time at idle (theoretical): 39 sec. Binding: 4-fold - vertical with polyband Machine dimensions: 1,700 x 1,248 x 2,370 mm (W x D x H) Machine weight: 1,210 kg (Subject to errors in the technical data)

Hydraulic press Pellegrini Hot water Pressing area 4000 mm x 1300 mm manual glue application incl. Insertion table Acceptance: Vacuum - Gantry forklift SIRIO

Vertical baler HSM V-Press 860 plus, built in 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of Make: 2021 Hours: 423 Pressing force: 60 t Drive power: 4 kW Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (WxDxH) Weight: 2213 kg Materials: foil, paper, cardboard boxes Note: The press is in good condition. It has been checked and tested by us. You can find a video on our website or Youtube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. Th ...

SERGIANI 2 - Floor Continuous Press Model Leopida/Leomatic Slide-in table 6,000 mm x 1,400 mm Press 5,000 mm x 1,400 mm Discharge roller conveyor 4,000 mm x 1,400 mm

HF Press Manufacturer Ormamacchine High-frequency continuous belt press Manual glue application incl. Laying table / filling bed 5000 x 1400 mm Press 4600 x 1400 mm Roller conveyor outlet 5000 mm Workpiece thickness max 200 mm Side printing cylinder 10 Pressing force 110 t RF Generator 40 Kw Dimension: 16000 x 3200 mm

Used press for pre-pressing cheese. Technical data: - producer TEWES BIS Barczewo - year of production 2006 - dimensions: overall length 4780 mm, width 1560 mm, height 3850 mm - pressing area 4.33 m3 - internal dimensions of the bath: length 3700 mm, width 1170 mm, depth 730 mm - mass of pressed cheese approx. 1000 kg - thickness of the cheese layer after pressing approx. 250 mm

Manufacturer: HSM Model: HSM V-Press 1160 eco Type of machine: Cabinet Press Year of manufacture: 2011 Pressing force: 532 kN Voltage: 3 phase, 400 V, 50 Hz Motor: 7.5 kW Rated current: 15.5 amps Find more here - .ucymachines/ Contact us at - sales@ucymachines

For sale is a TOX Pressotechnik press of type MBG 004.124. The machine has a pressing force of 40 kN, equivalent to about 4 tons, and is suitable for industrial press-fitting, joining, assembly, riveting, embossing and caulking work. Particularly noteworthy is the existing examination: The machine is still tested until 04/2027. Technical data Manufacturer: TOX Pressotechnik Type: MBG 004.124 Product Type: Press/Press-Fit Machine/Joining Machine Press force: 40 kN Maximum air pressure: 5 bar Total stroke: 200 mm Power stroke: 80 mm Year of Make: 2001 Machine serial number: 210192.1 Machine number / electrics: 210193.1 Nominal voltage: 230 V AC Control voltage: 24 V DC Frequency: 50 Hz Power: 0.2 kW Rated current: 0.5 A Fuse: 16 A Degree of protection: IP65 Standard: DIN EN 60204 Circuit diagram: STE 325-26 Country of manufacture: Germany Exam valid until: 04 ...

A small Alfred Reith bench punch is available. Punching force: 50kN, max. round hole diameter: 60mm, max. square hole dimensions X/Y: 46mm/46mm, max. mild steel sheet thickness: 3mm, max. stainless steel sheet thickness: 2mm, max. aluminum thickness: 4mm, throat depth: 500mm, stroke: 66mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible.

Used Used Engel Pet preform presses: Year: 2004 Condition: As Is Model: MacPET 4550-320 maszyna nr 52890 Year: 2004 Speed: preform 24,5g ca 21.900 pcs/hrs preform 29,0g ca 20.100 pcs/hr Number of molds: 72 Code: W 111 More details: https://bottlingscout.com

used cabinet press Manafacture: HSM Type: V-Press 840 plus Year of construction: 2011 Machine No.: 6147.244. Serial No.: 340001635 Z specifications: Pressing force: 36 t / 356 kN Transport length approx. 1,780 m Transport width approx. 1,247 m Transport altitude approx. 2,985 m Insertion opening width approx. 1,195 m Insertion opening height approx. 0.65 m Drive power 4 kW Weight approx. 1.8 t Bale weight up to approx. 360 kg Binding: 4-fold vertical (Subject to errors in the technical data)

Steel PS 46.2 Pressing Delivery Age: 1993

Key data: 750 kN, 150 mm

Control: STE 328-89-1 1/2" complete TOX Powerhouse: S75.160.200.12D Table size: 996 x 695 mm Installation height: 600 mm Total stroke: 150 mm Power stroke: 10 mm Weight: 5700 kg Electrical connection 230 V

CNC Hydraulic Press Brake manufactured in 2005. This GASPARINI X-Press 100 features a press force of 100 t and a bending length of 3,100 mm. It is equipped with a Delem DA60 control and a dynamic hydraulic crowning system for enhanced precision. If you are looking to get high-quality bending capabilities, consider the GASPARINI X-Press 100 machine we have for sale. Contact us for further details regarding this machine.

Cabinet press incl. tilting device Manufacturer: HSM Type: V-Press 860 TimeSave Year of construction: 2021 Specifications Press force: 594 kN Specific pressing force: 63.46 kN/cm² Drive power: 7.0 kW (4.0 + 3.0 kW) Voltage/Frequency: 400 V / 50 Hz Press capacity idle (theoret.): 26.25 m³/h Bale dimensions: 1,200 x 780 x 1,200 mm Bale weight: up to approx. 430 kg Type of feeding: autom. Lift-tilt device with lattice trolley Machine dimensions: 2,202 x 3,584 x 3,004 mm (W x D x H) Binding: manual with quick-link wire Suitable for: cardboard + mixed paper

Mechanical stamping press manufactured in 1984. This KAISER V50W High-Speed Press underwent a complete mechanical and electrical overhaul in 2022, featuring a new Siemens control system and a SEW 59 kW main motor. It offers a pressing force of 500 kN and a stamping speed of up to 400 strokes/min. If you are looking to get high-quality stamping capabilities, consider the KAISER V50W High-Speed Press we have for sale. Contact us for further details.