eccentric press used for sale

Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-729

Temperature range max.: 140 °c; capacity: 900 l/hr; diesel-fired: yes; power: 7.3 kW; connection: 400 V; unused in wooden box; 4496; Auction-ID: A1-46415-241

Upgrading of the electrical system carried out in the 90s by BRUDERER. Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Dimensions of the Painting: 600 x 700 x 2400 approx. mm Capacity: 25 Ton Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-731

380V; Motor: 4000W; Max. Flow: 14L/min; Max. pressure: 200 Bar; Max. intel water temp: 50 degrees; Power cable length: 3M; Automatic stop; Filter; High-pressure hose 10M; Spray nozzle 5759 Auction-ID: A1-46415-361

Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-727

2 heated plates, table size 1300 x 2500 mm Auction-ID: A7-46472-11

Electrical panel that manages the general control of the filter; Filter plates: 610x610 mm; Hydraulic control unit for closing and opening the filter, applied to the frame. Serial: 6008 Estimated weight: 360 kg Approximate dimensions: 3500x1500x1700 mm Auction-ID: A7-46655-180

Redevelopment of the electrical system carried out in 2017. Press table dimensions: 530 × 540 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine using measuring instruments and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-723

380V; Motor: 4000W; Max. Flow: 14L/min; Max. pressure: 200 Bar; Max. intel water temp: 50 degrees; Power cable length: 3M; Automatic stop; Filter; High-pressure hose 10M; Spray nozzle 5759 Auction-ID: A1-46415-362

\"The TOX Pressotechnik X-K050.3030.400.23 hydropneumatic cylinder is an industrial equipment designed to generate precise and controlled movements in pressing, assembly or automation applications. This X-K050.3030.400.23 model from TOX Pressotechnik combines robustness and reliability, ensuring consistent performance even in demanding environments. Offered as is, it is an effective solution for professionals wishing to integrate or recommission an industrial hydropneumatic cylinder. With dimensions of 185 cm in length, 60 cm in width and 36 cm in height, and a weight of 556 kg, this cylinder offers great stability and mechanical strength suitable for heavy loads and intensive work cycles. The TOX Pressotechnik X-K050.3030.400.23 is therefore a robust and high-performance tool for operations requiring precision and controlled power.\" Auction-ID: A1-46647-320

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-46415-526

CYBELEC V-DNC-1200/B DNC 1200 Ps/B, working lengh - 4100mm, pressing force - 150 ton, max. stroke - 415mm, max. closing speed - 200mm/s, pressing speed - 1-10mm/s, Auction-ID: A7-46486-4

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-46415-523

3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-46415-404

Temperature range max.: 140 °c; capacity: 900 l/hr; diesel-fired: yes; power: 7.3 kW; connection: 400 V; unused in wooden box; 4496; Auction-ID: A1-46415-242

Maximum distance spindle-work table: 345 mm, number of speeds: 12 - no-load rpm: 200-3070 spindle connection: B16 CM2 - spindle stroke: 62 mm. Estimated weight: 70 kg Approximate dimensions: 1200x800xh1000 mm Auction-ID: A7-46655-162

CNC controller CYBELEC MODEVA 10S working lengh - 3550mm, pressing force - 150 ton, Auction-ID: A7-46486-3

Hydr broaching press including keyway pressure milling Auction-ID: A1-45502-228

crimping range 15-63mm; max opening 75mm; pressure 53.5 Mpa; force 500 T; 3000W; 380V; 5585 Auction-ID: A1-46415-346

equipped with beading rod, manually operated Auction-ID: A1-45502-10

Temperature range max.: 140 °C; capacity: 900 l/hr; power: 7.3 kW; connection: 400 V; own weight: 128 kg; overall size L: 1150 mm; overall size W: 620 mm; overall size H: 850 mm; description: unused in wooden box; 4460; Auction-ID: A1-46415-18

Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-726

3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-46415-405

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-46415-524

Upgrading of the electrical system carried out in 2019. Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Quadro dimensions: 1400 x 500 x 2400 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-728

Manual press, column passage: 651mm; plate 500 x 500mm. Serial: 515988 Estimated weight: 300 kg Approximate dimensions: 1200x800xh1600 mm Auction-ID: A7-46655-183

Key data: 5 t, 600 mm

Length 0.64 m Width 0.84 m Height 2.20 m Weight 250 kg Color: Blue Press pads Mandrels

Vertical stainless steel pressure tanks, Additional title: Vertical stainless steel pressure tanks, Capacity: 44070 l, Max. working overpressure: 3 bar, Length: 3100 mm, Width: 3100 mm, Height: 6300 mm, Material: stainless steel 1.4541 (AISI 321), Position: vertical

Vertical 6 bar stainless steel pressure tank with dished ends and various fittings and equipment., Additional title: vertical stainless steel tank, Volume: 10560 l, Max. pressure: 6 bar test pressure 7,8 bar, Max. temp.: 10 °C, Length: 1900 mm, Width: 1900 mm, Height: 4770 mm, Material: stainless steel 1.4301 (AISI 304), Base construction: vertical tank with dished bottom and pipe feet, Features: Shell-manhole, level-display-hose, tank fittings: sampler, spray ball, bunging device, pressure gauge, safety valve, vacuum flap

Vertical 6 bar stainless steel pressure tank with dished ends and various fittings and equipment., Additional title: vertical stainless steel tank, Volume: 10560 l, Max. working overpressure: 6 bar test pressure: 7,8 bar, Max. working temperature: 10 °C, Length: 1900 mm, Width: 1900 mm, Height: 4770 mm, Material: stainless steel 1.4301 (AISI 304), Position: standing on 3 pipefeet, Base construction: bottomed shells, Features: Cleaning air/valve combination, cleaning line, CIP spray head, manhole, hose level indicator, sampling tap, pressure gauge, bunging device, safety valve, vacuum flap

Two vertical stainless steel pressure tanks with jacket cooling and various fittings., Additional title: vertical, coolable stainless steel tanks, Max. content: 8578 l, Max. pressure: 3 bar, Width: approx. 1.9 m, Height: approx. 4.3 m, Material: stainless steel, Position: free-standing, Base construction: cylindrical tank with dished bottoms and square tube feet on domes, Features: Bunging apparatus, pressure gauge, 2 shell cooling zones, standpipe for content display, manhole, sampler and side inlet in the frame, automatic valve with temperature-control, central bottom outlet with shutting flap

Two vertical, partially insulated stainless steel pressure tanks., Additional title: vertical stainless steel tanks, Volume: 5000 l, Operating pressure: 12 bar, Operating temperature: 20 °C

Pressure tank with two dished heads, central outlet and manhole., Additional title: vertical pressure tank, Volume: 5090 l, Working pressure: 2 bar, Width: 1500 mm, Height: 3780 mm, Weight: 700 kg

Stainless steel pressure tank for approx. 10 hl net capacity; cooled by means of double jacket on the frame and firmly welded insulated., Additional title: coolable, insulated, clad, Gross content: 1122 l, Perm. working overpressure: 3 bar, Perm. working temperature: 20 °C, Content cooling zone: 5 l, Length: 1000 mm, Width: 1000 mm, Height: 1700 mm, Material: stainless steel, Features: Manhole in the frame, spraying head with spraying head line and shut-off flap DN 25, safety valve and manometer, outlet flap, thermometer Height-adjustable tube feet

Pressure tank with two dished heads, central outlet and manhole., Additional title: Vertical stainless steel tank, Volume: 7366 l, Working pressure: 3 bar, Width: 1850 mm, Height: 3300 mm, Weight: 400 kg, Material: stainless steel, Position: vertical, Base construction: on feet, Features: central outlet, manhole, cleaning line, CIP spray head, 2-hole RLV, bunging device, pressure gauge, sampling tap, level indicator, discharge line with hand valve

Pressure tank with two dished heads, central bottom outlet and two further lateral connections at different heights and manhole., Additional title: Vertical stainless steel tank, Volume: 10017 l, Working pressure: 3 bar, Test pressure: 4 bar, Length: 1,9 m, Width: 1,9 m, Height: 4,1 m, Weight: 850 kg, Material: stainless steel, Position: vertical, Base construction: on feet, Features: central lower outlet as well as additional side connection, manhole

Pressure tank with conical head and central outlet, additional tangentially mounted inlet/outle and manhole, upper dished head., Additional title: cylindroconical tank, Volume: 10000 l, Working pressure: 3 bar, Width: 2,3 m, Height: 4,3 m, Weight: 1000 kg, Material: stainless steel, Position: vertical, Base construction: on feet, Features: central outlet, additional tangential inlet/outlet, manhole

Pressurised tank cellar with 4 upright 324 hl stainless steel pressure tanks and with double-seat valve solution on the operating level. The tanks are cooled using ice water., Additional title: coolable stainless steel pressure tanks, Volume per tank: 32400 l, Cooling surface/tank: 25 m², Perm. working overpressure: 3 bar, Systemic volume: 324 hl, Length: 2,5 m, Width: 2,5 m, Height: 7,4 m, Weight: 2585 kg, Material: stainless steel AISI 304, Features: Tank cleaning equipment with spray head, safety valve, pressure gauge, air valve combination; sampler, level indicator with valves, outlet valve , Periphery: Inlet and outlet pipework via double-seat valves

Stainless steel brewing vessel as a wort kettle and whirlpool combination with an external boiler., Additional title: brew vessel from stainless steel, Total volume: 260 hl, Diameter approx.: 3 m , Diameter incl. insulation approx.: 3 m, Frame height: approx.: 2 m, Width: 3,4 m, Material: stainless steel 1.4301 (AISI 304), Base construction: on stainless steel pipe supports, ground pegged, Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting

Additional title: Vertical tank, Capacity: 5244 l, Max. allowable operating pressure: 5 bar, Operating temperature: 20 °C, Width: approx. 1600 mm, Height: approx. 3200 mm, Material: Stainless steel 1.4541, Position: vertical, Base construction: 3 x feet, Features: Manway; safety valve; CIP piping

This pressure vessel from Werk Steinecke is a robust and reliable solution for use as a buffer tank in breweries and beverage processing plants. With a capacity of 178 hl and an operating pressure of 4 bar, it is ideal for intermediate storage and process buffering. The tank is designed for horizontal installation and features a solid industrial construction. It is equipped with a DN80 connection and can be fitted with the desired additional fittings from the available stock after consultation. A reliable and cost-effective solution for expanding or upgrading your production system. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: puffer tank, Capacity: 17800 l, Working pressure: 4 bar, Length: 4,8 m, Width: 2,4 m, Height: 3 m, Weight: 2000 kg, Material: stainless steel, Position: horizontal, Features: DN80 , Periphery: After consultation, we can equ ...

Insulated and clad stainless steel pressure tank with various fittings., Additional title: insulated tank, Capacity: 12800 l, Pressure: 4 bar, Temperature: 20 °C, Length: 5,1 m, Width: 2,1 m, Weight: 2000 kg, Material: stainless steel, Position: hozizontal, Features: insulated and cladded, outlet DN65, manhole, 2 spray heads

High-quality, hydraulic press can be used both manually and motorically. . Cylinders can be moved sideways. Safety valve at cylinder end position. CE marking 2-year warranty Pressure 60 t Stroke 400 mm Passage between the uprights longitudinally/sideways. 820 x 300 mm Installation height 900 mm Capacity per litre 6.0 l Speed from 5.4 mm/sec Speed to 8.3 mm/sec Motor power 3.0 kW Machine weight approx. 0.725 t Space requirements approx. 1.46 x 0.85 x 2.4 m Auction-ID: A7-46642-60

Horizontal stainless steel pressure tank with a heating coil and various fittings., Additional title: horizontal pressure tank, Capacity: 15000 l, Operating pressure: 4 atm, Operating temperature: 20 °C, Material: Stainless steel, Position: horizontal, Features: Internal piping for heating; level indicator; CIP connection; thermometer; sampling valve

Dimension of press: 1400x1400x1600mm, Workshop screw press, incl. assortment of tools; for more details see photos of Regal Auction-ID: A7-46619-324

Used Homogeniser High Pressure Tetra Pak 10000 lhr Main technical features of the Tetra Pak Homogeniser Alex TA25 Tetra Pak manufactured the TA25/200BAR model in 1995 as a used high-pressure homogeniser, designed to process up to 10,000 liters per hour at a pressure of 200 bar. Currently, the machine operates at a capacity of 10,000 liters per hour, while maintaining a maximum pressure of 200 bar. In addition, the machine includes two homogenization stages, which are perfect for precise particle size reduction. Components and operation The Tetra Pak TA25/200BAR uses mushroom valve cylinders, which therefore ensure efficient control of liquid flow. The pistons have a diameter of 50 mm, which consequently allows the machine to evenly distribute pressure across the two stages. Moreover, a 37 kW motor powers the unit, with an input of 400 V, drawing 68 Amps, running at 50 Hz and 1480 rpm. Di ...

Manual press brake Bending length 300mm Material thickness max. 2mm Knife widths 25, 50, 75 and 150mm Bending angle max. 90 degrees Condition: never used / new (5) Auction-ID: A7-46642-110

Pneumatic Press Pressure max. 7.5t Table 250 x 200mm Projection 100mm incl. tools and foot pedal see pictures Auction-ID: A7-46642-219

Toggle Press • Working height adjustable by simply loosening the clamping screws on the stand • Fine working height adjustment with HK 800 = millimetre-precise adjustment of the press head to the desired working height. The fine adjustment is done forcibly in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring Pressure 8.0 kN Stroke 40 mm Projection 90 mm Working height from up to 50 - 200 mm Table surface 120 x 160 mm Machine weight approx. 22 kg Dimensions L x W x H 160 x 230 x 410 mm Condition: never used / new (5) Auction-ID: A7-46642-187

Jaw width approx. 125mm, Clamping forces: 0=direct, 1=10kN, 2=20kN, 3= 30kN, 4= 40kN Auction-ID: A7-46619-283