eagle h used for sale

EAGLE EVISION 1530 F2.0 AF FIBER laser, manufactured in 2013 in Poland with its excellent rigidity and high stability, achieves the highest precision and quality in machining stainless steel, structural steel and aluminium sheets. The EVISION 1530 F2.0 AF laser cutting machine uses a high-quality 2 kW laser beam, which makes laser cutting smooth and trouble-free. The edges of the machined sheet metal are distinguished by their extraordinary smoothness, and the workpieces themselves are free of any irregularities. The large work table with a length of 3000 mm and a width of 1500 mm, together with the state-of-the-art EAGLE CNC control, make the machine capable of handling even the most demanding machining operations. The fibre laser weighs approximately 20 tonnes. Technical specifications of the EAGLE EVISION 1530 F2.0 AF laser - laser beam power: 2 kW (2000 W) - CNC control: EAGLE  ...

EAGLE eVision 1530 F3.0 AF fiber laser was manufactured in 2012 in Poland. The machine used in the cutting process of workpieces made of structural steel, stainless steel, aluminium and copper, guarantees the user excellent dimensional and shape precision during the cutting process. The low cutting edge and small heat-affected zone ensure that the geometry of the workpiece does not change during processing at the edges of the material. The EAGLE fibre laser uses the energy-efficient and trouble-free IPG YLS-3000 laser source to supply the PRECITEC cutting head with a high-quality 3 kW laser beam. The cutting head is equipped with overload and collision protection, which automatically shuts down all machine axis drives if a collision with the workpiece is detected. Thanks to the special head positioning system (HRS), a constant distance is maintained between the head and the sheet meta ...

Eagle Pro Bulk415 X-ray machine Serial: E313401 2020, Eagle Bulk415 Xray machine maximises contamination removal while cutting product waste and reducing downtime to boost line efficiency for dry bulk product applications like nuts, grains, granola, sugar, cereals, coffee and more, 15" TFT colour touch screen, comes with a brand new separate control panel and comes with a an additional Bakker magnetics magnet, ask for full technical spec, 3Ph

EAGLE eVision 1530 F4.0 4kW fiber laser built in 2016 in Poland, is designed for machining sheet metal made of among others stainless steel and aluminium. The state-of-the-art 4kW fibre beam cutting technology, combined with a stable work table and a specially designed cutting head, achieves excellent dimensional and shape precision over the entire workpiece area, regardless of the cut material. The low cutting edge and small heat-affected zone additionally ensure that the workpiece geometry is not altered during machining at the edges of the material. The eVision 1530 F4.0 fiber laser is offered with equipment consisting of, among others, an intuitive BECKHOFF CNC controller and a DONALDSON TORIT DCE multi-chamber extraction system. The total weight of the machine is approximately 18000 kg. Technical specifications of the EAGLE eVision 1530 F4.0 laser cutting machine - laser power:  ...

Machine Details Warehouse number 1105-03727 Machine Type Machining Center - Vertical Make YANG EAGLE Type MCV 1000 Year of construction 1998 Control type CNC Control Fanuc O-MD Storage location FRANCE Country of origin Taiwan Delivery time immediately Freight base EX WORK Technical details x-travel 1015 mm y-travel 500 mm z-travel 500 mm Control Fanuc O-MD Clamping surface table 1070x500 mm Table load - central/maximum approx. 250 kg Tool holder BT 40 Spindle speed: 24...6000 rpm Operating hours 5617 h Tool magazine with 20 seats/places Total power requirement 12 kW Information Equipment: CNC FANUC OMD -Cooling device BT 40 Copy of user manual available! Machine can be demonstrated! I.d..

Eagle Gearbox Reduction : i = 1 : 85 Dimensions : 1100 mm x 800 mm x 400 mm Outgoing shaft : avm. 50 mm, with pulley SPC 400-3 Incoming shaft : avm. 100 mm, with clamping bushing

Table length: 900 mm Table width: 500 mm Longitudinal X: 610 mm Cross Y: 500 mm Vertical Z: 610 mm Positions ATC: 24   Positions APC: 0   CNC Brand: Fanuc CNC Model: OI MB SPECIFICATIONS X - Travel  610 mm Y - Travel   500 mm Z - Travel  610 mm Controll  Fanuc OI - MB Table Length x Width   900 x 500 mm Table load in kG  500 Kg Spindle Taper   Sk 40   kW power on spindle  7.5 kW Spindle speeds / ranges   6000 Rpm ATC tool changer   24   Number off controlled axis  3  

Maximum Diameter: 3000 mm // Minimum Diameter: 500 mm

The NEXUS of 7501 is the cheapest universal hardness testing machine with currently available technology: This hardness testing machine sets the benchmark in quality and price in the device class with proven swivel mechanism (motor switch between Indenter and lens): never get a comparably-equipped machine of this quality at such a fair price. In the standard version are already integrated: USB camera + software for the automatic measurement of impression of hardness -electronically controlled test load application with load cell in closed-loop -integrated boxed PC (WIN 7), LAN connectivity, result export, hardness testing software IMPRESSIONS -integrated touch-screen monitor for a simple, direct touch control -LED lighting, Brinell with ring light The machine is universally suitable for all classic metal hardness testing (test loads 0.5 250 kg). Due to the modern, quality equip ...

NEMESIS 9000 are high-quality, modern, by INNOVATEST developed and produced hardness tester. These versatile machines combine groundbreaking technologies and extensive facilities in a machine body with a modern design. The basic function of the hardness concept is based on a settled on the test piece nose cone's mounted a turret with up to 8 positions. The desired hardness test method can be choiceed conveniently on the large touch screen monitor by means of Visual, intuitive user interface (control and evaluation software IMPRESSIONS. Now, the operator presses START and starts the automated testing: -automatically the turret swivels the correct Indentor / lens -using search drive, the specimen surface is contacted and focused (Vickers / Brinell) -now the impression generated power-regulated -then the integrated image analysis software automatically evaluates the impression of h ...

NEMESIS 5100 - Universal hardness tester with turret head (saves changing indenting bodies and lenses) THE ultimate universal hardness testing machine - all-rounder: stand-alone or fully automatic hardness gradients (requires motor XY table) This hardness testing machine sets the reference in the current state of the art. The basic function is based on a test head lowering to the test piece on which a turret head with up to 8 positions is installed. This is particularly advantageous if the test piece is very heavy or if an automatic feeding system is to be used. In addition, the user does not have to worry about focusing: The automatism finds the correct test height / focus distance automatically (detecting search). The desired hardness test method can be conveniently selected on the large touchscreen monitor. Now the operator presses START and the automated test begins: - aut ...

Brinell hardness tester with fully automatic test sequence, automatic Brinell hardness impression measurement The machine is equipped as standard with a motorized 6-fold turret head (3 penetration bodies, laser positioning system and 2 lenses with ring light). The video measuring system with 18-MP video camera delivers excellent images, the automatic evaluation of the Brinell-Calotte impression is extremely fast and very precise. With this fully automatic hardness tester, only START has to be operated after the focus: The impression and the evaluation are fully automatic. At the touch of a button, a test certificate is automatically generated. The IMPRESSION™ hardness test software with digital zoom function, offers numerous functions for converting Brinell hardness results into other hardness scales or tensile strength. Highlights of the machine: - Hardness scales: All Brinell  ...

Micro hardness tester Vickers HV0,001 to HV 30 (depending on type) from 1 gram - all force levels force-controlled The FALCON 400 series are micro-hardness testers for a test force range of 0.001 to 30 kgf (depending on the type) for the micro Vickers, Knoop and Micro-Brinell hardness testing methods. The unique test force load system includes an electronic control system in the closed control circuit and sensor technology with force feedback. In addition to the electro-mechanical test force load, the FALCON is equipped with first-class mechanical and optical components. The innovative software functions of the I-Touch™ "control" allows the storage of results, creation and storage of test programs, overwashing of results (limit input), conversion to other hardness scales and curvature corrections for measurement on unplanned test surfaces. The digital / optical hardness impressio ...

asdfasdfasdf

Vertical milling head, milling head, angle milling head CCCP / USSR STANKO Type 1905 Product No: 393 Year of construction 1974 Tool holder: MK4 Hole spacing Machine flange plate: 245 x 185 mm Mounting hole: 17 mm Centering diameter on the machine flange plate: 190 mm - Drive via carrier, centric in centering diameter - Degree scaling on the flange plate 4x 90 rotatable - Degree scaling on the angle head +/-90 swivel Weight: 65 kg good condition Slot butt head bearing number 58166 and vertical milling head bearing number 58164 of identical STANKO milling machine.; used

Handling device, handling system JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 200 Horizontal movement: 450 mm Vertical movement: 600 mm Payload: 4 to 10 kg Projection: 150 to 600 mm Guide column vertical: 25 mm Guide columns horizontal: 16 mm Tool holder: 33 x 33 mm Screw clamping - Can be moved in three axes (horizontal, vertical, rotatable) - Encoder KÜBLER for the rotary movement type 8.5873.5320.B311. S003 - BALLUFF displacement transducer for horizontal movement type BTL6-A110-M0450-A1-S115- 2 pieces balancer for vertical movement CP DESOUTTER, type 10 D Adjustment range 2 to 5 kg per balancer - for weightless hanging of small appliances - load capacity gradually adjustable - constant pulling force Space requirement L x W x H: 770 x 310 x 1200 mm Net weight: 19 kg good condition; used

Handling device, handling system JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 200 Horizontal movement: 500 mm Vertical movement: 600 mm Payload: 4 to 10 kg Projection: 120 to 620 mm Guide column vertical: 25 mm Guide columns horizontal: 16 mm Tool holder: 51 x 45 mm Screw clamping - Can be moved in three axes (horizontal, vertical, rotatable) - pneumatic screwdriver DESOUTTER type SD 140-AR510-S4Q - 2 pieces balancer for vertical movement CP DESOUTTER, type 10 D Adjustment range 2 to 5 kg per balancer - for weightless hanging of small appliances - Payload adjustable - constant pulling force Space requirement L x W x H: 770 x 310 x 1150 mm Net weight Pneumatic screwdriver 2.8 kg Net weight handling device: 16 kg good condition; used

Handling device, handling system JÄGER HANDLING manipulator for screwdriving technology Type: Handy-flex 200 Horizontal movement: 300 mm Vertical movement: 370 mm Payload: 10 to 14 kg Projection: 250 to 550 mm Guide column vertical: 25 mm Guide columns horizontal: 16 mm Tool holder: 26 mm oval with screw clamping - Movable in three axes (horizontal, vertical, rotatable) - 1 piece balancer for vertical movement TECHNA, type 9340, adjustment range 10 to 14 kg- adjustable snap-in latch for vertical movement, manual release via Bowden cable - for weightless hanging of small appliances - load adjustable - constant pulling force Space requirement L x W x H: 880 x 500 x 1120 mm Net weight: 23 kg good condition; used

- Hand & foot control - integrated ambos - solid substructure Specifications: - Hammer weight: 40 kg - Lifting height: 230 mm - Projection: 240 mm - Cylinder Ø: 140 mm - Motor power: 4 kW - Voltage: 400 V - Dimensions WxHxD: 700 x 1900 x 1200 mm - Weight: approx. 900 kg

Sensor, write head, read head, read/write head -Manufacturer: Turck Blident, read/write head -Type: TNLR-Q80L400-H1147 -Voltage: 24 VDC -Dimensions: 415/80/H25 mm -Weight: 1.1 kg

Working length: 3.200 mm Machine is equipped with: -3 drilling units from below with 3 spindle-head - 2 holders from above -1 pressure cylinder on the side The control was by the customer through a control, serial: Siemens,. newer built; replaced.

High pressure - piston pump Flow water pump Manufacturer: UDOR Type: GAMMA 162 TS 1C. Detailed information on the manufacturers page, see pictures. Condition: Used, fully functional Scope of delivery: see the pictures.

Two hydraulic valves from Rexroth, two hydraulic pumps and 5 hydraulic cylinders are offered, all new and indispensable as spare parts 1. 2 Stueck Rexroth Valves MNR: R900912485 DBW 10 B2-52/315-6EW230N9K4 FD: 48121 2. Voac Parker Hydraulics made in Sweden Part No. 3708719 Type F11-058-M8-CF-K-000 Ser No. 2000180541 3. Brueninghaus Hydromatik D-72160 Horb A10VSO 71 DR / 31R PPA12N00 FabrNr: 1117486 Bauj. 04/96 DR = 280 bar Vo =71 cm3 n=1500 min 4. 5 unused, two-sided hydraulic cylinders with bearings Type 70/50-280-625 Length from middle hole to middle hole approx. 625mm Total length approx. 750mm Piston diameter 70mm Rod diameter 50mm Piston path 280mm Special price

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - continuous grilling line - Total length outside: 6 m - Total width: approx. 1.300 mm - Height of the gallows: 1.200 mm - Gallows for chain hoist - 5 floors above each other - Conveyor belt of wire belt: 600 / 2,35 / 7 / 12,7 - Double-walled floor and hood, isolated

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - serial: Sprematec - length: approx. 10 m - width: 1350 mm inside / 1518 mm outdoor - heated thermal oil - year: 10/2003

E. - Chain hoist / hoist Offer number: 20056 Make: DEMAG Type: PK 1 N-F Machine number: 2388876 Built: 1978 Technical data: - Load capacity 250 kg - Lifting height - chain path approx. 2 m - 2 lifting speeds 1 + 4 m/min - top-sided hanging hoe - Operation of the chain hoist via hand remote scanner - Cable length hand remote scanner approx. 1.5 m - Drive 400 V - Weight approx. 20 kg

Used nipple holders Nipple holder with internal voltage, up to 2", self-exciting

Used nipple holders Nipple holder with internal voltage, up to 2", self-exciting

specifications: - Load capacity 2000 kg - Lifting height – chain travel approx. 4 m - Weight approx. 60 kg

Specifications: - Load capacity 2500 kg - Lifting height – chain travel approx. 28 m - Lifting speeds 5.3 m/min - Running chain 11.2 x 34 - Operation of the chain hoist via hand remote button 19.5 m - Drive 400 V / 3.0 kW - Space requirement W 600 x H 500 x D 350 mm - Weight without chain approx. 90 kg - Weight with chain 200 Kg - Transport box W 1150 x H 700 x D 800 mm

THOFEHRN 3 to Crane Hoist / Wire Rope Hoist Cable winch, incl. control, gearbox + motor, German Crane

E-chain hoist, electric hoist, crane STEEL type R 12 Fabr. No. 3437532 Year of construction 1979 Payload: 1250 kg Hook travel: 2.4 meters Lifting speed: 8 m/min. Fine lifting speed: 2 m/min. 2 load trains = 1250 kg Engine power: 1.25 / 0.25 kW mains connection 380 Volt, 50 Hz - chassis self-made - without chainbag good condition; used

Hydraulic power pack, hydraulic unit BOSCH REXROTH Order No: 983885 Year of construction 1982 Tank capacity: 150 litres Operating pressure: 60 bar nominal pressure / max. 100 bar Volume flow: 20 litres /min. Motor power pump: 3 kW Mains connection: 380 volts, 50 Hz. - 1 piece hydraulic pump BOSCH REXROTH, type 1PV2V3-40/25 RAO1MC63 - 2 pieces hydraulic valve BOSCH REXROTH with electro solenoid coil, type E6 E51/AG24NZ4- 2 pieces hydraulic valve BOSCH REXROTH with electro solenoid, type 4WE10D10OFLG24NZ4 - 1 piece pressure accumulator - various throttle valves, pressure regulators and pressure gauges - return line filter with indicator - hydraulic tank with maintenance cover Space requirement L x W x H: 950 x 750 x 1100 mm Weight: 400 kg good condition; used

Heat exchanger, shell and tube heat exchanger FUNKE Safety heat exchanger for system separation type SWF 301-6-B13-4 Series No. 659839 Drawing No. 748 924 0850 Year of construction 2011 Operating pressure max. Shell chamber 16 bar Pipe space 10 bar Safety room 16 bar Volume jacket chamber = 1.2 liters Pipe space = 0.7 liters Safety room = 0.3 liters Temperature max. 100C jacket pipe 80 mm- leakage indicator via ALCO pressure switch- 2 pieces pipe fittings on the jacket pipe M30 x 2mm thread for 22 mm pipe- outer diameter (hydraulic oil)- 2 pieces pipe fittings on the lid 3/4 (cooling water) Dimension L x W x H: 580 x 220 x 130 mm Net weight: 16 kg good condition; used

Electric chain hoist, crane, hoist KONECRANES type XN 20 1608 B2 Fabr. Nr: 1016304318 Year of construction 2010 Load capacity 1600 kg Hook path 9 meters Main lifting speed approx. 8 m/min. Fine lifting speed approx. 2 m/min. Chain size 11,3 x 31 DAT Motor power main stroke 3,5 KW Motor power fine stroke 0,86 KW Mains connection 400 Volt, 50 Hz - 1 load line good condition; used

E-chain hoist, electric hoist, crane GIS/SWF type 150 / F Fabr. SKU: 15739 Year of construction 1970 Load capacity 1500 kg Hook travel 4.5 meters Main lifting speed 4 m/min. Fine lifting speed 1 m/min. - Electric carriage with one speed for double T-beams - 2 load trains good condition; used

E-chain hoist, electric hoist, crane GIS type EM 200 / F Year of construction approx. 1999 Load capacity 2000 kg Hook travel 3.9 meters Main lifting speed 4 m/min. Fine lifting speed 1 m/min. Mains connection 400 Volt, 50 Hz - Electric carriage with 2 speeds for double-T-carrier - 2 load trains good condition; used

E-chain hoist, electric hoist, crane GIS type 150 / F Fabr. Product no.: 1502802 Year of construction 1981 Load capacity 1500 kg Hook travel 4 meters Main lifting speed 4 m/min. Fine lifting speed 1 m/min. - Electric carriage with one speed for double T-beams - 2 load trains good condition; used

Hand - Swivel bending machine KRAMER type AMS 650 x 1.5 Hand swivel bending machine, bending bench Year of construction approx. 1985 Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper cheek opening approx. 60 mm Bending cheek adjustment approx. 0-25 mm Bending angle 0-180- Upper cheek adjustment via hand crank - Pre-screw rail for the bending clamp - one-piece sharpening rail 135 Space requirement L x W x H 1200 x 600 x 1100 mm Weight 160 kg good condition; used

E-chain hoist, electric hoist, crane YALE type 5-10/10-5 series. No. 8526 Year of construction 1979 Payload: 1000 kg Hook travel: 3 meters Lifting speed: 5 m/min. Fine lifting speed: 1.3 m/min. 2 load trains = 1000 kg mains connection: 380 volts, 50 Hz. - Suspension eyelet on the top of the crane good condition; used

E-chain hoist, electric hoist, crane DEMAG type DKES 2-200 K V2 DI with Dematik BUS control via crane system control Fabr. No.61456646 Year of construction 2003 Payload: 200 kg Hook travel: 4.0 meters Main lifting speed: 14.0 / 19.2 m/min. Fine lifting speed: 0.20 m/min. Chain size 4.2 x 12.2 mm 1 load line = 200 kg - with control logic DKES2/5 500V - without crane operation - Dematik BUS control via crane system control - without roller chassis Mains connection: 400 volts, 50 Hz Rated power: 750 W Rated current: 2.4 A good condition; used

E-chain hoist, electric hoist, crane STEEL type T 201-10/2,5 1/1 Product no.: 1204075 Year of construction 1989 Load capacity 125 kg Hook travel = lifting height 4.7 meters Lifting speed 10 m/min. Fine lifting speed 2.5 m/min. 1 load rank = 125 kg cable length control bottle approx. 2 meters mains connection 400 volts, 50 Hz. - Suspension eyelet on the top of the crane Weight: 20 kg good condition; used

Hydraulic unit with hydraulic pump BOSCH REXROTH / HYDRONORMA Hydraulic unit Year of construction approx. 1985 Operating pressure: max. 65 bar Volume flow: 20 litres/min. Tank capacity: 110 litres Engine power: 3 kW Engine speed: 1440 rpm. Mains connection: 400 Volt, 50 Hz - 1 piece Hydraulic vane pump MANNESMANN REXROTH, type 1PV2V3-40/25RA01MC63A1 - 1 piece drive motor KATT, type FFN 100L - 1 piece pressure reducing valve BOSCH REXROTH, type DR 8 G433/100 YM - 1 piece return filter - 1 piece 4/2-way manual valve (e.g. for extending and extending a double-acting hydraulic cylinder) - Hydraulic tank with maintenance cover and oil level sight glass Space requirement L x W x H 900 x 550 x 1150 Net weight: 142 kg good condition; used

Hydraulic unit with hydraulic pump RACINE / VICKERS Hydraulic unit Operating pressure: max. 44 bar Volume flow: 13 litres/min. Tank capacity: 40 litres Engine speed: 950 rpm. Motor power: 0,75 kW Mains connection: 380 Volt, 50 Hz - 1 piece Hydraulic vane pump PVQ-PSS=-06CR-J11 - Hydraulic tank with maintenance cover and oil level sight glass - 2 pieces hydraulic hoses with 12L connections, length = 950 mm Space requirement L x W x H:: 700 x 400 x 750 mm Weight: 97 kg (without oil content); used

Coil hook YALE - TIGRP Type: TCK 2.0 / 300 / SN Efficient and safe transport of coils, rollers, rings, bushings and much more Year of construction: approx. 2016 Load capacity: 2000 kg Coil width: 300 mm Hook support: 320 mm Usable height: 500 mm Net weight: 62 kg good condition 2 pieces available, price per piece; used

E-chain hoist, electric hoist, crane STEEL type Si T 201-10/2,5 Product code: 1202373 Year of construction 1989 Load capacity 250 kg Hook travel = lifting height 3.5 meters Lifting speed 10 m/min. Fine lifting speed 2.5 m/min. 2 load ranks = 250 kg cable length Control bottle approx. 1.4 meters Mains connection 400 volts, 50 Hz. - Suspension eyelet on the top of the crane Weight: 22 kg good condition; used