e b used for sale

Automatic Foamfoil - Packing machine EASY 250 Special The Easy 250 Special is wrapping your precious workpiece with a foamfoil. So the surface is protected in a perfect way, also in a hardpaper box. The wrapping is in throughfeed and independed of any different width. Made for Batch1. Different length and width in the mix ! The line is mainly existing of: -infeed transport belt with Servodrive for precise positioning, length 2800 mm -First welding station with fast positioning in the width -Center transport belt with Servodrive, length 2800 mm -Second welding station with fast positioning in the width Foil width top and bottom: 260 - 600 mm Foil roll diameter: top and bottom: 800 mm Foam foil thickness appr. 1,0 mm Workpiece length appr. 1500 - 2600 mm Workpiece width appr. 300 - 1400 mm Workpiece thickness appr. 35 - 90 mm

Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat. No. 13-0029 in a very good condition Testing water by 22°C back pressure at 1 bar pressure: 0,4 bar capacity: 7800 l/h motor: 0,55 kW Connection: iniet: DN 65/outlet: DN 50 according to DN 32676 can be changed on request for an additional charge surcharge: infinitely variable via frequency converter Measurements and Weight: Length: 60 cm 45 cm Width: 25 cm 21 cm Height: 74 cm 40 cm Weight: 40 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Complete chipping plant EWD, capacity 30-40 m3 of logs per hour. The plant was dismantled in Germany. Located in Moscow. Technical data and price on request.

Hi here sell a Schmitt enertec BHKW which is immediately ready for use and for sale also can be tested Data: Motor you E2876 R6 210 KW generator LEROY SOMER year: 2006 Hours of operation: ca 11000 CHP is until was run very well to expand only expanded because some customers have not finished it to pay bills. If you have questions I am under to you available: Andreas.Peters89@gmx.de

Electrically heated chamber furnace, make VEI type: KA_EB_TO external dimensions (w x h X d): 2500 x 2900 x 1700 mm usable dimensions (w x h X d): 1250 x 2000 x 1250 mm temperature: 250 ° C heating power: 24 kW

Iddon HRX 4.5? (120mm) Cold Feed Rubber Extruder Year 1994 LD ratio 17:1 Bostock & Bramley Gearbox ABB Motor: 1994, 95kW, 1870 rpm, 419 amps, 360 volts With 1 x spare vacuum screw With Control Panel

electrical heated tempering continuous furnace external dimensions: lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

New (second hand) pumps Centrifugal pump Ebara 2CDX_120-40 (photo 1): -400v -3 phase -3 kw -2900 rpm -Suction 1 1/4" PUMP TECHNICAL DATA • Maximum working pressure: 8 bar • Maximum temperature of the liquid: -5°C ÷ +60°C for standard and E version -5°C ÷ +110° for H-HS-HW-HSW version • G1½ suction connection for 2CDX 200, G1¼; for the rest of the range • G1 discharge connection 3SHS 50-125/3.0 centrifugal pumps close coupled (photo 2)

New (second hand) pump Ebara CRN 1-2: Vertical, multistage centrifugal pump with suction and discharge ports on the same level (in-line) enabling installation in a horizontal one-pipe system. Pump materials in contact with the liquid are in high-grade stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy service and access. Power transmission is via a split coupling. Suitable for many industrial and commercial applications (water pressure boosting, industrial water supply & transfer, machining, and etc.)

System: piston diaphragm pump Manufacturer: Emmerich Type: SP521 2075 Machine number: 0275 Year of construction: 1977 Performance: 5m 3 with 16 bar Pressure: 16 bar Engine: BBC, 14.9 kW, 50 Hz Inlet connection: DN 50 Durckseite connection: DN 50 Dimensions: approx. 1600 mm L

Amperage range maximum: 0 A Amperage range minimum: 0 A aligning for sections of a growing line ideal for wind tower, vessel, pipemills with rail bogie driven Load capacity per section:30 + 30 T Vessel range Minimum:    1500Ø Vessel range Maximum:    6500Ø No of wheels per section:4 Number of matching pieces:2 Length:                  4.500 mm  Width:                   2.200 mm  Height:                  1.000 mm  Weight:                  2885 + 3885 kg 

Manual Edger Esterer EWD DKV with task table good condition ! Immediately available !; Well

J. Engelsmann mobile lifter for containers etc., max. weight 300kg, fork length approx 700mm, fork diameter 50mm, fork gap approx. 600mm, max. lift approx. 1700mm from the floor.

Electrically heated circulating air furnace (horizontal air flow) max. temperature: 550?C useable dimensions (w x h x d): 900 x 1300 x 1800 mm charge weight: 800 kg gross heating power: 72 kW circulation fan: 1 x 7,5 kW

Te Koop: Endress & Hauser Flow monitor (droogloopbeveiliging) T trend type: Att12-A11D11B6D1. Bestelnummer 700.1

1 aseptically filling Elo-Pak line suitable for ESL milk and fruit juice Int. Designation: new hall composed of: a.) 1 aseptically filling Elo-Pak filling machine Int. No. II 103 built by Fa: Shikoku Type: U-980 A Serial No. 455 Year of construction 2007 with 3 format options, 0.33, 0.5 and 1.0 l Output: 11,000 U/h for fruit juice in use in operation until the end of January 2019. The following annexes to the Elopak line are: 3 rows of individual packaging transport lanes from polycetting, length to Meuerer carton packing system approx. 23 m with curves 3 Elopak ceiling stackers Year of construction 2004; with screw cap magazine with Yet stream transport railways into the 3 lid storage containers 1 carton pack vending machine for 6 units in the box, partially open at the top Type: Ba-6-30; Serial No. 50325-210 Manufacturer: Meurer Year of construc ...

Technical data: -Equal water-cooled AC unit TIG TR 4,. -water-cooled MIG-MAG system DV - IV - XT - E. welding plant STH 400 for welding of: stainless steel, steel, aluminum, etc. -16 x welding program be selected with: -. Setting selection: Stick welding, Tig - welding AC / DC, MIG-MAG welding -Digital Volt + amp display -Welding current continuously adjustable by 10 A / 15 V to 400 A / 34 A - max welding current of 400 A max 60% ED 315 A 100% ED -Power 400 V / 43 A / 16 kVA -Heart monitor -Welding current rise - and welding power descent setting -Back fire setting -Gas before. - current setting -water cooled Tig welding - torch 8 m, lightweight design -E - welding cable + ground cable - water-cooled MIG - MAG torch â separate wire feed case DV - IV - XT for MIG - MAG welding -4 wheels - wire feed -Intermediate package welder - wire feed case 4500 mm -P ...

KF Pasteuristationsanlagen Capacity 6600 liters per hour Control technology of the revised 2007 -Full documentation -Fully serviced

For the loading or unloading of drums from trucks and containers, for the discharge palletizing or converting barrels in a shop or a factory site. Technical specification -SWL: 750 kg - introduction of the fork:-weight: 80 kg

Nr. 03 SINGLE-OVITE EXTRUDERS DIAMETER 100 Nr. 01 HEAD CONSTRUCTION 2 LAYERS

Electrically heated continuous furnace, make VEI-Engineering type: DLNTO-EB 830-500 heat treatment: tempering temperature max. 500°C working temperature: 220-450°C clear dimensions (w x h): 800 x 210 mm heated length: 4.950 mm heating power: 2 x 30 kW fans: 2 x 5,5 kW Cooling water for 2 heat exchangers: inlet max. 2 bar PLC: Siemens S7

Suction system suitable for the offered plasma cutting system. New condition. Installation indoors and outdoors possible. Receptacle with quick release. Technical data â?¢ Connection power 11A â?¢ Air capacity 5000 m3/h 46 sheet metal processing machines for the production of angular and round air ducts, e.g. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.

2 X DEUTZ MARINE ENGINES V12 816 626 HP@1800 RPM WITH TWINDISC MG5202 2.48:1

Suction slot duct system for passenger cars and trucks, exhaust extraction duct unit Npnfl Complete system with suction duct, trolley, suction hose, suction blower. Length approx. 20m, 3 suction hoses Aspirator

Turning + Thread cutting semi-automatic M32 The machine was never used for production. Suitable for internal and external threads max. diameter 90 mm max. turning length 45 mm max. thread pitch 1.5 mm max. thread length 14 mm Max. Thread pitch multi-speed 3 mm largest thread length multi-speed 21 mm Drive motor approx. 3 hp Machine weight 800 Kg

Drawer fitting machine husband Type: XII LOD 2 oscillating abrasive belts Grinding wall surface 760 mm long x 280 mm high max. drawer width - fit width 1000 mm maximum drawer height 250 mm Width adjustment by handwheel Support tables on each grinding wall outside Support table size 650 mm x 235 mm Engine strengths 1 x 4.8 kW and 1 x 7.5 kW Dimensions 1900 mm x 1300 mm x H 1200 mm

<b>Features:</b> Used pallet roller conveyor Condition: Top condition with slight traces of use Material: steel (galvanized) Color: galvanized Professionally dismantled and packaged 10 pieces in stock Price per meter <b>Technical data</b> Manufacturer: Euroroll Condition: Used Colour: galvanised Total length: 2.520mm Removal length: 1,300mm Roller track length: 1.220mm Frame: steel/galvanized Height: 80mm Width: 40mm Incl. 2 brake rollers Diameter: 80mm Pallet namhe and feed element by forklift <b>Pallet roller conveyor</b> Thanks to the excellent workmanship of the pallet roller web, your material glides gently to its destination, even under high loads. <b>Tailor-made logistics for your intralogistics</b> We are your competent contact for roller conveyors, belt conveyors, inclined conveyors o ...

Two three-phase motors 380-415 V - 50 Hz 0.9 KW - 2820 RPM Protection class IP 20 Never been in use

Te koop Endress + Hauser Flowmeter Type: Promass 83F Serial number: 79097A02000 Inclusief test certificaat Number: 1.06 Voor meer info graag bellen of mailen. email: wh.derikx@gmail.com Tel: +31620758459 De nu kopen prijs is excl. 21%btw

Te koop Endress + Hauser Flowmeter Type: Promass 80F DN 150 Serial number: 7A00BE02000 Inclusief test certificaat Number: 2.05 Voor meer info graag bellen of mailen. email: wh.derikx@gmail.com Tel: +31620758459 De nu kopen prijs is excl. 21%btw

Hand Terminal KeTop Panel C 35 for ENGEL Robot Viper

Etipack Sistema 2 tamper-evident labeller for the application of 2 self-adhesive tamper-evident seals on the closure points of formed cartons and 1 vignette/bollini label on the upper face of the carton, label dispenser model SUPER 1.3 with coding device for printing the variable data on the labels, carton size range from 32 x 85 x 15 mm up to 150 x 220 x 65 mm (AxBxC), label reel maximum diameter 280mm, reel core diameter 40/75 mm, labelling speed up to 40m per minute, infeed height approx. 900 mm, electrical connection 230V/50-60Hz, maximum load 4 kW, compressed air 4-6 bar (4 machines available).

- max welding current: 200 A - max welding voltage: 27 V - Total power: 10.6 kW - Machine weight: 88 kg - Weight wire feed unit: 17 kg - Space requirement (W x D x H): 376 x 684 x 381 mm Details with wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version is manual power source

Elobau Configurable safety evaluation unit 471M41H31 - how new - was never in operation

EDI Autoflex Extrusion Die width 900 mm.

Grinding machine • For grinding curves and internal radii

No. 4929: 1 gebr. Eccentric press 22 - 26 to Fabr. EBU, type 25, with stroke number 130 min-1 Arb.-Ber.: Stroke adjustment 80 mm,

Angular cup unit, elevator, continuous conveyor used Manufacturer: GOUGH ENGENEERING Height approx. 7 m Shaft approx. 900 x 630 mm Stainless steel chain Plastic cup approx. 600 x 220 x 130 mm Gearmotor North 1.5 kW Thanks to our own special machine construction, changes are also possible according to your wishes. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Angular cup unit, elevator, continuous conveyor used Manufacturer: GOUGH ENGENEERING Height approx. 7 m Shaft approx. 750 x 620 mm Plastic chain Plastic cups approx. 450 x 200 x 120 mm Gearmotor Bauer 0.75 kW 27 rpm Thanks to our own special machine construction, changes are also possible according to your wishes. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale. Search terms: Becherlevator, Becherwerk, Winkelbecherwerk

The following materials are available: Cover Liner Piston Water Jacket Connecting Rod Fuel Pump Any Parts

high-quality front foils for industrial use for IPC10.8 104168006 and IPC10.7 104168010

Machine details Stock number 1105-03330 Machine type guide and pull spindle lathe Make ERNAULT-SOMUA Type Cholet 550 Year of construction 1990 Control type conventional Storage location FRANCE Country of origin France Delivery time immediately Freight base EX WORK price Technical details Turning diameter over bed 550 mm Turning diameter via support 500 mm Turning length 1100 mm Tip height 250 mm Spindle bore 52 mm Inner cone 136 Spindle speeds 32-1800 rpm Feeds - bed slide / lengthwise 0.05-07 mm/w Feeds flat slide 0.033-0.45 mm/min Total power requirement 13 kW Weight of the machine ca. 2,3 t Space requirement approx. 2870 x 940 x 1400 m Information accessories: PARAT steel holder 4 STUCK 3 bake lining dia 250mm 2 AXIS DIGITAL

All welding machines are tested for function. Supplied with operating instructions and circuit diagram. Technical data can be found in the attached data sheet. If you have any questions, please do not hesitate to contact me.

Reference Num.: 3463 Brand: Kuvertanleger / Envelope Feeder Type: UEK 335 Construction year: 1988 Available: directly Status: In production Location: Deutschland

pressure: 63 t throat: 275 mm stroke: 8-120 mm no. of strokes: 30-120 Hub/min ram - range of adjustment: 85 mm hole in the table: 220x100 mm table surface area: 750x540 mm ram surface: 400x260 mm table height: 820 mm tool hole in ram: Ø 50 mm total power requirement: 7,7 kW weight of the machine ca.: 5 t dimensions of the machine ca.: BxTxH 1500x2000x2450 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

6-piece sedimentation oscillator with watches New condition, never used

Capacity: 0 t CNC Brand: 0 CNC Model: 0 Technical data Pressure: 4 to Execution: number of columns: 2 Machine frame: fixed Circulary table diameter: 220 mm diameter: 80 mm Number of strokes: from: 50 s/min up to: 150 s/min Adjustment of the slide: 40 mm Fixed stroke: 27 mm Tool height: 148 mm Distance between columns: front: 230 mm Voltage 50 Hz 3x: 400 Volt Power: 0.75 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1100 mm Width: 900 mm Height: 1600 mm Various accessories: Security/savety device Lamp Sound insulation cabin