dust used for sale

width of the strips: 75 mm band length: 2000 mm band speed: 29,0 m/sek grinding width: 460 x 75 Plantisch mm Dust suction hood: 100 mm total power requirement: 3,0 kW 100% ED weight of the machine ca.: 66,0 kg range L-W-H: 1080 x 440 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding a ...

width of the strips: 150 mm band length: 2000 mm band speed: 29,0 m/sek grinding width: 460 x 150 Plantisch mm Dust suction hood: 100 mm total power requirement: 4,0 kW 100% ED weight of the machine ca.: 84,0 kg range L-W-H: 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding ...

Hörger SKU 1500 Artificial Grass Cleaning Device Artificial Grass Cleaner SKU for sand-filled or granule-filled artificial grass. The artificial turf cleaner consists of a cleaning attachment in the front attachment and a tank-pump unit in the rear attachment. The rear tank is divided into a fresh water and a dirty water area. The PTO-driven high-pressure pump sucks in the fresh water and transports it via hoses to the front of the front cleaning attachment. Due to the large working brush diameter of 500 mm, the machine can be used for three different working procedures are carried out. 1. Maintenance cleaning: Depending on weather conditions, every 14 days to monthly; Coarse dirt and dust that has settled in the meantime as well as pole abrasion are removed. 2. Intensive cleansing with loosening: About every 3 months; Coarse dirt is removed, fine particles consis ...

Hörger SKU 1500 Artificial Grass Cleaning Device Artificial Grass Cleaner SKU for sand-filled or granule-filled artificial grass. The artificial turf cleaner consists of a cleaning attachment in the front attachment and a tank-pump unit in the rear attachment. The rear tank is divided into a fresh water and a dirty water area. The PTO-driven high-pressure pump sucks in the fresh water and transports it via hoses to the front of the front cleaning attachment. Due to the large working brush diameter of 500 mm, the machine can be used for three different working procedures are carried out. 1. Maintenance cleaning: Depending on weather conditions, every 14 days to monthly; Coarse dirt and dust that has settled in the meantime as well as pole abrasion are removed. 2. Intensive cleansing with loosening: About every 3 months; Coarse dirt is removed, fine particles consis ...

Styrofoam shredder MAXI XL 1400 x 560mm MAXI 1400 x 600mm JUMBO 1800 x 800mm Insertion opening: L x W Polystyrene shredder MAXI XL: 1400mm x 560mm Polystyrene shredder MAXI: 1400mm x 600mm Polystyrene shredder JUMBO : 800mm x 800mm Dimensions: L x W x H (dimensions without blower) Polystyrene shredder MAXI XL: 2.4m x 0.9m x 1.6m Polystyrene shredder MAXI: 1.9m x 0.8m x 1.8m Polystyrene shredder JUMBO: 2.4m x 1.1m x 1.8m Motor power/connection/power conveying fan: Pre-shredder / conveyor blower Polystyrene shredder MAXI XL: 5.5 kW | Blower 2.2 kW Polystyrene shredder MAXI: 6.2 kW (with built-in screw under the pre-crusher) | Blower 2.2 kW Polystyrene shredder JUMBO 11.2 kW (with built-in screw under the pre-crusher) Conveyor blower 5.5 kW Throughput (EPS) Polystyrene shredder MAXI XL: 8-10 m3/h Polystyrene shredder MAXI: 25-30 m3/h Styrofoam  ...

Clean room pass box. 2-doors Pallet air Shower UV. Pass boxes Air Shower UV is aimed at dust removal and disinfection processes using ultraviolet light (UV) without wastes. Thanks to the fans in the unit and the induction nozzles, dust is removed and collected in the equipment’s filters.

Compact copper granulating plant with a total weight of 3.500kg dust aspiration in the primary mill conveyor belt and another one in the separation table, at the back we have a drawer with several filters where the dust accumulates to work without mask, also comes with 2 vibrating tables to obtain a purity of copper of 99.9% in the conveyor belt we find an electromagnet frequency inverters Siemens brand the primary mill is 30cv the machine in total makes a sum of 48kw with an hourly production of 400kg/h.

- Exhibition unit - Filter generation motorized, mobile, suction side right or left, convertible, height reduction for transport possible ---------- Technical data ---------- Test mark: H3 / BGHM HO 143034, Suction nozzle: 1 x 140 / 160 mm, Nominal volume flow: 1,450 m³/h, Volume flow: 1,593 m³/h, Max. vacuum: 2,200 Pa, Filter area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,715 x 900 x 2,130 mm, weight: 324 kg, sound pressure level: 69 dW(A), dust class M: AWN 16 ; new exhibition machine

Mobile dust extractor SCHUKO Type: Vacomat 200 XP Technical data: Connection Ø: 200 mm Filter cleaning: pneumatical (manual start) Volume flow: 2262 m³/h Motor power: 4,0 kW Filter surface area: 14,5 m² Test sign H3 / BGHM HO 123027 Dust level M, AWN 16 Noise absorbation: 73 dB(A)

Mobile dust extractor SCHUKO Type: Vacomat 180 XP Technical data: Connection Ø: 180 mm Filter cleaning :pneumatical (manual start) Nominal volume flow: 1832 m³/h Motor power: 3,0 kW Filter surface area: 13,5 m² Test sign H3 / BGHM HO 163002 Dust level M, AWN 16 Cone Sound absorbation: 74 dB(A)

Mobile dust extractor SCHUKO Type: Vacomat 180 XPe Technical data: Connection Ø: 180 mm Filter cleaning: motorical Filter surface area: 13,5 m² Nominal volume flow: 1832 m³/h Motor power: 3,0 kW Dust level M, Test sign H3 / BGHM HO163002 AWN 16 Cone Noise absorbation: 74 dB(A)

Expected particle size: 0.5-50µm, dust consistency: dry and free-flowing. Operating temperature:

working hours machine: 59,000 h (stand 11-21) working hours laser: 20,000 h (stand 11-21) working range X x Y x Z: 3048 x 1524 x 170 mm laser laser type: Raycus Fiber RFL-C 3000 S (single module) laser capacity CW: 3000 Watt laser range capacity: 300 - 3000 Watt cutting head: Raytools with auto-focus Machine CNC-control: CNC Bystronic Byvision cooling unit: S&A CWFL-3000 ANS dust extraction: Donaldson Torit DCE – DFPRO 6 electrian capacity total: approx. 37 KW machine + 5 KW dust extraction space needs approx.: 12,900 x 4,000 x 2,350 mm total weight approx.: approx. 13,000 KG cutable materials and thicknesses mild steel ( EN 10027-1 S 235JR+AR or rec. Raex quality) 25 mm inox ( EN 10027-2 1.4301 (X5CrNi18-10 ) 20 mm aluminum (e.B. 3.3535 AlMg3 ) 12 mm brass 10 mm machine description standard options: • cutting machine with operator safety advice ...

Delta New Poluclean P30 Dust Extraction System Delta New Poluclean P30 Dust extraction system 400 V 5.5 kW 3500 m³/h 95 liters Weight: 361 kg Metrics: HxWxD = 300 x 100 x 97 cm Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. Further extraction systems in other sizes - new and used - can be found in our shop! International shipping costs on request!

High speed 5 axes CNC machinning center CMS Concept 40/155/25 PX5 was built in Italy in 2020. CNC gantry milling machine characterised by outstanding robustness and reliability, is designed for precision milling, drilling and 3D machining of parts made of materials such as sand, epoxy and phenolic resin, carbon fibre, fibreglass and aluminium. Dimensioning of workpiece structures is performed by an advanced calculation programme based on the finite element method (FEM), ensuring high geometric accuracy and reliability, even under heavy workloads. Applicable to a variety of industries, the machining centre for composites and aluminium, features a mobile bridge with a PX5 5-axis workhead running on two electrically welded rigid guideways. All five interpolated axes of the head (X,Y,Z,C,A), are equipped with high-performance servomotors and pneumatic brakes. The high-speed electro-spindl ...

Welding fume extraction table Welding table DCE UMA150HG5 dedusting Welding table with integrated suction with filter Manufacturer dust control equipment dust collectors Type UMA 150H G5 Rest according to photos

Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? One cutting head strategy ? Chiller ? Automatic pallet changer, lengthwise installation ? Longitudinal conveyor ? Ergonomic control panel with Touchscreen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 5000 with optimized standby, purged with nitrogen and LensLine ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Gas mixer (integrated) ? Laser control TASC ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device (UTI) incl. bus connection ? ControlLine: Height regulation and ...

working area: 3000x1500 mm : 20 mm : 15 mm : 10 mm max. workpiece weight: 900 kg : 4000 W Machine comes WITHOUT LIFTMASTER! Standard equipment Machine: - Closed machine frame with integrated laser unit - Motion unit for high-precision machining - Torque drive in combination with linear direct drives - Closed beam guidance - Single cutting head strategy - Cooling unit - Automatic pallet changer in longitudinal direction - 19 touch colour screen - Longitudinal conveyor belt - Work area lighting - Position laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine Cutting head: - Lens cutting head with 250mm focal length - Universal quick-change device (UTI) - LensLine with condition check - ControlLine: Height control and sheet outer edge detection - Lens with RFID chip Control system: - SINUMERIK 840D SL control system - Simple workshop programming - Fast post-product ...

New machine 24 months warranty Advantages: + tested by our master baker and confectioner with various doughs + very solidly built, power transmission with belt drive + no high voltage current necessary - operation with 230V possible! + with 4 feet and permanently installed boiler + mobile machine, on swivel wheels with parking brake + short kneading times with excellent results + with reverse gear, for mixing the ingredients before the kneading process + 10 kneading speeds, for particularly gentle to intensive kneading + 2 timers, with automatic switchover & switch-off + ideal for smallest batches + Stainless steel boiler, central rod and spiral + transparent flour dust cap with automatic switch-off + fast spare parts supply within 1-2 working days Specifications: - Flour capacity: 1 - 8 kg - Dough capacity: 1.5 - 12 kg - Boiler volume: approx. 20 litres - Motor p ...

Surface Grinding Machine JONES & SHIPMAN 540 X, capacity 450x150 mm, magnetic plate, dust extractor, OPTIDRESS E Factstor 2, Max working dimensions: 450x170 mm, Longitudinal travel x axis: 470 mm, Cross travel y axis: 171 mm, Clearance between worktable and spindle axis: 502 mm, Feed rate x axis: 2-25 m/1, Feed rate y axes: 0 - 1 m/1, Wheel speed: 2640 rpm, Wheel dimension: 200x20x31,75 mm, Spindle motor power: 1,5 Kw, Weight: 1.200 Kg, Accessories: Coolant tank, dust extractor, magnetic plate, OPTIDRESS E Factstor 2

volume capacity: 1600 m3/h feed volume: 99,9 % length: 3.000 Absaugschlauch mm motor: 230 Volt motor: 1,1 KW weight: 80,0 kg range L-W-H: 580 x 580 x 900 mm Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class W3 (degree of separation:> 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surchar ...

Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-150 mm Hess Junior single wood sander --------------------------------- basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated bracing for optimal vibration damping. Staggered grinding units with large dimensioned Belt drive drums for slip-free belt travel. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet belt run. All guides as a ball linear set on hardened and polished waves. Lasting precision thanks to protection against dust and dirt of the sphere linear sets. Contact roller and sanding pad in a balanced ratio to the grinding belt grain load. The large dimensioned drive drums guarantee the full tr ...

width of the strips: 75,0 mm band length: 2000 mm band speed: 29,0 / 14,5 m/sek grinding width: 460 x 75 Plantisch mm Dust suction hood: 100 mm total power requirement: 3,0 kW 100% ED weight of the machine ca.: 72,0 kg range L-W-H: 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 75 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operators body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just ...

width of the strips: 150 mm band length: 2000 mm band speed: 29,0 / 14,5 m/sek grinding width: 460 x 150 Plantisch mm Dust suction hood: 100 mm total power requirement: 3,0 kW 100% ED weight of the machine ca.: 90,0 kg range L-W-H: 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 150 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operators body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is jus ...

Machine name: Cassette filter Manufacturer: Infastaub Type: MKR 4/20 - 4/20 RO Year of construction: 2004 Dimensions: Length 3800mm (4200mm) x Width 1150mm (1400mm) x Height 2300mm (2700mm) Empty weight: approx. 4 tons Tech. Documentation: Yes Remark: Dust type: pharmaceutical dust, particles: 1 -10 my Operating voltage 400V 50Hz Control voltage 24V DC Volume flow max. 6000 m/h Operating temperature max +80 'C Compressed air pressure 6 bar 1 filter area 80 m2, 2 filter area 80 m2. Filter resistance max. 1 25 mbar max. 2 15 mbar Raw gas collection channel ∅ D6: 315 mm, M6: 700 mm Without filter cassettes Accessories: Control Condition: Used good Price: On request

Shaw Intermix K4 MK5 Mixer Body and Hopper Foot-Center of Shaft= 700mm. Diameter of Shaft: 180mm. With dust seal holders and drop door motor Without brass dust seal rings

Extraction, dust extractor DUST COLLECTORS PULSNITZ Sto 5 / 125-1 Flow rate: 400 m3/h vacuum: max. 1250 Pa ( 0,0,0125 bar ) Density: 1.2 kg/m3 Operating temperature: max. 50 °C Suction connection ( inner diameter ): Ø 70 mm Motor: IM B5-71x0.37x3000 0,37 kW 2850 rpm 220 / 380 V 3AC used, checked! Dimensions: 550 x 550 x 1130 mm

Trotec SP1500 Co2 Laser 400 Watt incl. water cooling Year of construction: 2013 Included: software + license key, connection cable, manuals. The laser system is in very good condition and is immediately ready for use. Only 145 operating hours Increase your profit with the SP1500 The combination of maximum productivity, Processing surface in standard plate size, highest system lifetime and lowest Maintenance costs result in an unbeatable Calculation that made the SPl 500 the most profitable Best-in-class laser cutting and engraving system make. Properties: Machining area: 1500 x 1250 mm Czxlyoic Machine dimensions: 2850 x 2200 x 1300 mm Material size: 1700 x 1600 mm Material height: 185 mm Laser power: 400 watts – water-cooled Speed: 165 cm/sec Weight: 1300 kg Accuracy: +/- 0.1 mm Addresable accuracy: Encoder +/- 0.001 mm Entrained suction on the wo ...

1pcs gebr. Automatic blasting machine - Manufacturer: OTI Oberflächentechnik GmbH - Model: IG-P - For rotary workpieces (max. Drm. 800mm and max. length 1,500mm) - Weight: 760kg - Motor power: 4.0kW / 400V / 50Hz / 3,850m³/h / 1,800 pa - Residual dust quantity: recirculation mode < 2 mg/m³ - 4 cartridge filters à 16sqm / total filter area: 64m² - Description of the system in PDF on request - technical data according to manufacturer's information - Price on request from location We receive new items every week. Not all of them are immediately available online. However, if you are looking for something specific, you can simply send us an inquiry or feel free to call us. ------------------------ 1pc used automatic blasting machine - Manufacturer: OTI Oberflächentechnik GmbH - Model: IG-P - for rotary workpieces (max. drm. 800mm and max.  ...

Number of sanding units: 4 St sanding width: 190 mm Sanding height max.: 4-180 mm weight: 4200 kg Hess Expert 4-belt single wood sanding machine -------------------------------------- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimen ...

Key data: 4000 mm, 2000 mm, 4400 W

BYSTRONIC ByStar 4020 laser cutting machine was built in 2006 in Switzerland. The machine, designed to cut workpieces made of among others stainless steel and aluminium, uses a laser beam with a power of 4.4 kW and a thickness of just a few μm, which guarantees the highest precision and energy efficiency at low operating costs. Laser cutting of workpieces with a maximum thickness of 25 mm takes place on a stable work table designed to provide unobstructed operator access to the workspace. After machining, the edges of the workpieces are distinguished by their unparalleled smoothness and absence of irregularities. The BYSTRONIC laser cutting machine is offered complete with equipment consisting of among others a BYSTRONIC CNC controller, a dust extraction unit and an EF COOLING cooling unit. The total weight of the machine is 18300 kg. Technical specifications of the BYSTRONIC BySt ...

Manufacturer: Venyeskob Venspray Perfect, Type: Lackierstrasse mit Trocknung, Year: 2015, Control: Venyeskob/, Spraying line: yes, Work piece width min-max mm: 50-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-80, Belt conveyor: yes, Dust exhaust (number): yes, work piece cleaning: yes, Spraying machine: Venspray Perfect, Farbmanagment: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 1, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, Lackrückgewinnung über Band: yes, Wäscheranlage: 2 Stück, Dry exhauster: yes, Dust exhaust (number): yes, Year :2015

Manufacturer: Venyeskob, Year: 2007, Control: CNC-6300, Spraying line: yes, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-80, Working widht max mm: 1300, Belt conveyor: yes, Brushing machine: no, Dust exhaust (number): yes, work piece cleaning: yes, Spraying machine: Venyeskob, Spraying heads - total: 2, work piece detection: yes, Conveyour system: Band, Spraying stations: 2, Laquer circles: 3, Laquer system - airless: yes, Laquer system - airmix: yes, Lackrückgewinnung über Band: yes, Wäscheranlage: 2, über Band: yes, by rollers: yes, Dry exhauster: yes, Senkrechtrockner 1: Düsentrockner, Dust exhaust (number): yes, UV dryers - 1 lamp (number): 2 Lampen/schräg, Year :2007

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 3.6 kW -Speed: 1415 rpm -Volume flow: m³/h -Pressure: Pa -Connection input: Ø 510 mm -Connection output: Ø 570 mm -Impeller: Ø mm -Dimensions: 1230/950/H1400 mm -Weight: 240 kg

Centrifugal fan, dust extractor fan, fan, extraction fan, dust fan, painting extractor fan -for paint wall, paint booth -Motor Ex protected -Motor power: 2.5 kW -Speed: 1450 rpm -Volume flow: 5000 m³/h -Pressure: 800 Pa -Connection input: Ø 500 mm -Connection output: Ø 450 mm -Dimensions: 1065/850/H1390 mm -Weight: 186 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow: 10,000 m³/h -Total pressure: 3500 Pa -Connection input: Ø 350 mm -Connection output: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg

Extractor fan, welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor, -Manufacturer: Esta, small dust extractor extraction fan for smoke extraction -Type: Esta 100 -Drive: 0.55 kW / 2850 rpm -Fan wheel: Ø 280 mm -Connection: Ø 100 mm -Volume flow: Max. 1000 m³/h -Dimensions: 425/420/H845 mm -Weight: 35 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan, blower -Manufacturer: Airheat, centrifugal fan with soundproof housing -Type: RDH-500-11.0 -Volume flow: 20000 m3 / h -Motor: Hoyer 15 kW 1460 rpm -Dimensions: see techn. Drawing with the photos -Dimensions: 1800/1110 / H2900 mm -Weight: 584 kg

Industrial vacuum cleaners, vacuum cleaners, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners, filter bags, dust bags -Manufacturer: cfm, Antistatic safe bag system -Type: 8 40874 -Number: 17x dust bags available -Price: per piece -Dimensions packed: 170/210/H80 mm -Weight: 0.2 kg/piece

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: Elektra power 7.5 kW -Speed: 1435 rpm -Connection input: Ø 350 mm -Connection output: Ø 350 mm -Dimensions: 1160/1900/H1770 mm -Weight: 390 kg

Welding smoke filter, welding smoke extraction, soldering smoke extraction, small dust extractor -Esta: Small dust extractor OM-8 -Drive: 0.37 kW -Extraction arm: 3400 mm -Dimensions: 500/1330/H1550 mm -Weight: 76 kg

Ventilation duct, ventilation flap, ventilation system, filter system, dust extraction, dust extraction, extraction system, ventilation ducts and fittings -Outer frame made of galvanized sheet steel -Dimensions 1575/1275/H175 mm -Weight 50 kg

centrifugal fan, dust extraction fan, fan, suction, dust blower -Motor power: 15 kW -Speed: 2925 rpm -Total pressure: Pg 33 m bar -Total pressure: Pst 30 m bar -Volume flow: 9660 m3/h -Inlet connection: O 400 mm -Outlet connection: O 400 mm -Dimensions: 1090/860/H1200 mm -Weight: 238 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -for: painting wall, painting booth -Motor: Ex protected -Motor power: 3.6 kW -Speed: 1440 rpm -Connection input: O mm -Connection output: 450 mm -Dimensions: 1260/1100 / H815 mm -Weight: 188 kg

centrifugal fan, dust extraction fan, fan, suction, dust blower -Motor power: 37 kW -Speed: 2940 rpm -Inlet connection: O 420 mm -Connection output: 450 x 300 mm -Dimensions: 1700/1300/H1080 mm -Weight: 500kg

Centrifugal fan, dust extraction fan, fan, extraction, dust blower, welding fume extraction -Motor power: 0.37 kW -Speed: 2800 rpm -Connection input: Ø 115 mm -Outlet connection: Ø 115 mm -Impeller: Ø 300 mm - Connection: 400 volts -Dimensions: 400/600/H450 mm -Weight: 21kg

centrifugal fan, dust extraction fan, fan, suction, dust blower -Motor power: 0.4 kW -Speed: 1276 rpm -Total pressure: 260 Pa -Volume flow: 3200 m³/h -Inlet connection: Ø 400 mm -Connection output: 360/470 mm -Dimensions: 1130/560/H780 mm -Weight: 106 kg

The mixer combines hot and cold mixing. After hot mixing, the material automatically enters the cold mixer for mechanical cooling. -hot tank 800 l. - cooling tank 2000 l. - hot stirring time from 6 to 10 min. - cooling time from 10 to 15 min. - engine power 110 kW The device is adapted to the production of WPC terrace boards. Components needed for the product, such as PVC and wood dust or MDF dust, can be combined.

ID2809 Teka Mixomat 3000 year/Year of construction 1999 Semi-mobile concrete mixing plant, 80 cbm/h, high-performance compulsory mixer THZ3000 (3000 litres), insulated housing, row dispensers, binder scales, water scale, dust extraction, silos (4 x 35 cbm, 1 x 28 cbm), Pikotomatik control renewed in 2019, automatic high-pressure cleaning for mixers, optional with electric aggregate Semi-mobile concrete batching plant, 80 cbm/h, high-performance forced action mixer THZ3000 (3000 litres), enclosure insulated, in-line feeders, binder scale, spirit level, dust removal, silos (4 x 35 cbm, 1 x 28 cbm), control picomatics renewed in 2019, automatic high-pressure cleaning for mixers, optionally with power generator

Starting product : car and truck tyres (excluding forklift and loaders tyres) max diam. 1.200 mm, (larger tyres need pre splitting), Final product : 2-4 mm.crumbs, 1-2 mm.crumbs, 2 operators per shift, calculated on a 220 days/year 8 h/day = 1.760 T/year - 16 h/day = 3.520 T/year, Required space : about 25 x 15 mt., Harmonized steel as a residual product., Average throughput rate of granulate : 1 Ton/h (throughput rate depends on feeding rate and on the kind of tires), installed power : about 380 kw used at 65%, Delivery time : about 6 months from confirmation, Main machines:, Debeader - manual (20-25 tyres/h) for truck tyres only, feeding conveyor belt, Dual shaft shredder 1.300 mm wide, transport belt, transport belt for fine material, transport belt to return oversized material to shredder, High speed granulator 1.300 mm wide rotor, extraction belt, vibrating table, Overbelt magnetic  ...