1000 offers

maximum number of results exceeded > 1000
please refine your search

Category: 1300: other machines and plants
New in: 1995
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Thera are two identical robots available, max. load: 30kg, controls: RC 30/51, year of construction robot 1/ 2: 1994/ 1995. more

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

5 rows, \r\ncap. approx. 12.000-15.000 pcs../h\r\ninclude\r\nheadmachine type Industrie T 5 S-1/2-85/9,\r\ndoughweightrange 35 - 95 g\r\n2 moulding drums a) 75 - 85 g /// b) 85 - 95 g\r\nintermediate proofer, moulder more

Category: 1300: other machines and plants
New in: 2006
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Max. load: 16kg, max. reach: 3102mm, number of axis: 6, controls: KR C2, weight: 700g. more

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH
Category: 1300: other machines and plants
New in: 2002
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Max. payload: 125kg, max. additional load: 120kg, max. total load: 245kg, arm length: 1000mm, number of axis: 6, controls: K C1, weight: 975kg. more

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

for making rustic-square rolls, capacity approx. 7.000 pcs./h \r\ndoughweightrange 40 - 150 g - depends on the dough,\r\nstainless steel coverplates, righthand - operation\r\n2 flour duster at the infeed\r\nwithout electrical control pane more

Category: 2301: robots
New in: 2008
Price: request quote
Location: Land-cz CZ 60200 Brno, Janska 12
Seller: AMARON s.r.o.

Operating hours: 500 h Control system: KRC V5.5.7 Low Payloads : (6-22 kg) Payload: 16 kg Total load: 16 kg Maximum reach: 1612 mm Number of controlled axes: 6 Position repeatability: (ISO 9283): ±0.04 mm Weight: 245 kg KR 16 as a console robot KR 16 in the foundry variant more

Category: 2500: miscellaneous
New in: 2009
Price: 45.500 EU?
Location: Land-pl PL
Seller: Kennedy Machines
Category: 1200: machines and plants for process engineering
New in: 2017
Price: request quote
Location: Land-de DE Ohrdruf
Seller: ENDERS Produktion GmbH

high-speed submersible mixer Propeller diameter: 650 mm Speed: 462 U/min Drive 10 kW Year of constr.: 2017 (still unused) The compact mixer with waterproof encapsulated submersible motor is suitable for numerous applications such as: mixing, mixing and recirculation in municipal wastewater treatment plants, in industry and in agriculture more

Category: 203: planing machines
New in: 2012
Price: request quote
Location: ab Standort
Seller: Gebr. Engelfried oHG

Number of spindles: 8 St. Working width: 260 mm Working height: 160 mm Length of the planing table: 2000 mm Feed motor: 7 kW Feed speed: 5-30 m/min. total power requirement: kw Dimensions (L/W/H): mm weight of the machine ca.: kg Control: Weinig PowerCom Weinig Powermat 1000 CNC, year 2012 ------------------------------- Executive Summary: ------------------------------- 8 spindles HSK / powerlock large PowerCom controller Grooved Axial and axial axes CNC controlled Detailed description: ------------------------------- Technical specifications: ------------------------------- Working width max. 260 mm Working height max. 160 mm 1. tool holder ------------------------------- First lower tool  ... more

Category: 108: welding machines
New in: 2015
Price: request quote
Location: Land-dk DK Naestved, Maglemolle 90
Seller: DenTool LTD

Stock number: 3356 INDUSTRIAL ROBOT Manufacturer: Campbell Qirox, type: QRC 410 E Machine no.: 7234.400QC6A, year: 2015 Specifications: Ansahl pods 7 PCs. Working range DIA 5100 mm Max capacity 10 kg USB interface 2 piece. Control V6 basic serial. Integrated welding interface Cleaning station Tandem burner Accessories cleaning station for tandem-writer Manipulator model WP-TC-60kN capacity 60 kN Nominally torsion moment 5500 NM Pull-out torque 6000 NM Turning RADIUS 600-2200 mm Rotary table 1060 mm Max speed 22.5 degree / sec. Turning range +/-360 degree In and out of voltage length 1000-6000 mm extended into and out of voltage length 1000 mm Welding equipment more

Category: 204: grinding machines
New in: used
Price: request quote
Location: Oberkochen
Seller: Gebr. Engelfried oHG

Number of sanding units: 4 St. sanding width: 190 mm Sanding height max.: 180 mm Control: ja weight: 3300 kg Dimensions (L/W/H): 2600x920x1890 mm Dust suction hood: 2x180 2x120 mm Double sided grinding machine Löwer DSM 2004 Double-sided four-band single-wood sanding machine for sanding Solid wood, e.g. Window wood etc. Highly stable top model with innovative details. Suitable for high Continuous load even at higher chip removal rates. - Successively arranged grinding units for rough grinding, fine grinding and finish sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberised roller and shoe 3.Finish aggregate with fiber brush - Dir ... more

Category: 107: sheet metal working
New in: 2006
Price: request quote
Location: Land-fi FI
Seller: GINDUMAC GmbH

AMADA LC 2415 ?3 (2006) OVERVIEW Brand: AMADA Model: LLC 2415 ?3 Application Type: Laser Cutting Machine Type: Laser cutting machines Availability: Immediately Production Year: 2006 Location: Finland Origin Country: France Production Hours: 31417 GENERAL DATA Measurements width: 5700 mm Measurements depth: 2500 mm Measurements height: 2275 mm Machine weight: 6700 kg CONTROL UNIT Brand: FANUC Model: Series 160i-L CNC main language: English CNC language customizable: Yes MAIN DRIVE Laser power: 4 kW Laser type: CO2 Laser brand: FANUC LASER C4000 MOVEMENT X-Axis Movement: 2520 mm Y-Axis Movement: 1550 mm Z-Axis Movement: 300 mm WORKPIECE Workpiece drm:  ... more

Category: 201: saws
New in: 1983
Price: 4.200 €
Location: Land-de DE Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Vertical Panel saw\r\nBrand: Holz-Her\r\nType: 1215\r\nYear: 1983\r\n\r\nTechnical data:\r\n\r\nMachine dimensions:\r\nLength of frame: 5555 mm \r\nWidth, freestanding (saw unit in bottom position): 1480 mm\r\nHeight to top edge of carriage: 2835 mm + 45 mm adjustment of feed\r\nHeight to top edge of saw unit in top position: 2895 mm + 45 mm adjustment of feed\r\nHeight of workpiece support: 285 mm + 45 mm adjustment of feed\r\n\r\nWorking dimensions:\r\nMax. through-feed height: 2200 mm\r\nMax. trimming height: 2100 mm\r\nMax. workpiece length: 4300 mm\r\nMax. workpiece thickness: 80 mm\r\nAccuracy of cut: 0,2 mm/m length\r\n\r\nSaw unit:\r\nMotor power (S6 - 40%): 4,6 kW\r\nSpeed of sawbla ... more

Category: 107: sheet metal working
New in: 2005
Price: request quote
Location: Land-fi FI
Seller: GINDUMAC GmbH

AMADA LC 2415 ?3 (2005) OVERVIEW Brand: AMADA Model: LC 2415 ?3 Application Type: Laser Cutting Machine Type: Laser cutting machines Availability: Immediately Production Year: 2005 Location: Finland Origin Country: France Production Hours: 44410 GENERAL DATA Measurements width: 5700 mm Measurements depth: 2500 mm Measurements height: 2275 mm Machine weight: 6700 kg CONTROL UNIT Brand: FANUC Model: Series 160i-L CNC main language: English CNC language customizable: Yes MAIN DRIVE Laser power: 4 kW Laser type: CO2 Laser brand: FANUC LASER C4000 MOVEMENT X-Axis Movement: 2520 mm Y-Axis Movement: 1550 mm Z-Axis Movement: 300 mm WORKPIECE Workpiece drm: 1 ... more

Category: 706: beverage machines
New in: used
Price: request quote
Location: Land-de DE
Seller: Seegräber GmbH

Beer production with brewing pan 500 lt, lauter tun 500 lt., Whirlpool 500 lt., 2 tanks 450/500 lt., Plate heat exchanger Alfa Laval ICS energy cooling system with 140 lt., Glycol tank, power, 21 kW, year 2016 Cooling room with cooling unit and compressor 3 pcs. SS conical tanks 2800 lt. side- and conical cooled 8 pcs. SS tanks Bottle Filler long-pipe Enzinger Germany and Crowner, 3,000 btl./hr. Labeller MEB Siphon filler 200 btl./hr. Bottle washer Scheuer Germany KEG cleaning machine, 30 KEGs / hour Industrial dishwasher Plate pasteurizer, year 2017 3 pcs. dispensing station ID5327 more

Category: 101: boring mills and machining centers
New in: 2010
Price: 7.400 €
Location: Land-it IT Brescia
Seller: Mercury Auctions s.r.l.

PROFILE MACHINING CENTER AND CUTTERS Working Center for window frames and cutters – company profile For sale exclusively at 10:30 next November 13 in Leno, Brescia from company active in the production of Windows and doors Available detailed catalogue and expertise of all machinery and items in the lot. Check out our website to download call for participation and mercury auctions complete catalogue, or contact us at 030 7751645 9-13 office hours, 14:18. Vision of the lot the next 30 October from 9, by appointment Double head MITRE saw Fom Industrie-model Blitz 500 A-LUX with the roller set (2010) # 8 cutters Hall Adige CM 500 Workshop equipment varies more

Category: 706: beverage machines
New in: 2015
Price: request quote
Location: Land-de DE
Seller: Seegräber GmbH

Was used for line performance about 12,000 bph. Higher performance is possible. Various 0.7 - 1.0 liter glass bottles for sparkling wine and wine with natural cork, polystop, longcap Closure and aluminum screw cap Control unit PRO -Color display 21 as a touch screen -Industrial PC, INTEL Multicore 3.8 GHz -Form-fitting stainless steel housing IP 65 -Working speed 12.000 bottles / hour. More then 20.000 bph is possible. -Easy to use menu navigation Remote maintenance connectable Level measuring bridge X-ray -under-filling -shapely stainless steel housing -Protection class IP 65 -Height adjustment via handwheel -Closure control optical or inductive Level measuring bridge X-ray -over-filling ... more

Category: 101: boring mills and machining centers
New in: used
Price: used machinery auction RESALE 37.800 €
Location: Land-it IT Leno, Brescia, Italy
Seller: Mercury Auctions s.r.l.

For sale by auction the next 13 November at 10:30 in Leno, from company active in the production of Windows and doors Available detailed catalogue and expertise of all machinery and items in the lot. Check out our website to download call for participation and mercury auctions complete catalogue, or contact us at 030 7751645 9-13 office hours, 14:18. Work center Hyundai 500-SPT/V30 TD including closet with tools (1998) work center Vimacchine SPT 500 d (2003) machining center Chiron FZ 12 W Magnum Dah Lih MCV-model-working Centre 720 (1998) milling machine Deckel milling machine with three heads c. Mec canica S.r.l. TFM3 model (1995) tapping drill electric drill Mechanical Milling Drillin ... more

Category: 402: packing machines
New in: 2009
Price: 66.600 EU?
Location: Land-pl PL
Seller: Kennedy Machines

The machine worked from the news for about a year, it was later dismantled. Since then stored in a heated hall, protected from dust. Inability to install and test the machines in action. Based on visual inspection found the completeness of the device. more

Category: 209: other wood working machines
New in: 2003
Price: 2.400 €
Location: Land-de DE 40721 Hilden, Neustraße 45
Seller: Achte display system GmbH

WOOD power mobile clean air suction plant RLA 200. Professional clean air extraction systems for wood shavings and wood dust. The RLA 200 clean air suction system is used, but in good condition. -Dust tested according to H2, residual dust content below 0.2 mg / m3 -Filter material from Polystyrine, aluminium coated, washable and thus high service life -Filter by category C-BIA tested & approved -Energy saving (engine power according to the device output) -Rugged, galvanized casing -Mobile thanks swivel casters with brakes Technical details - clean air extraction system - series RLA Type: RLA 200 Article number: 513 2000 Fabrication-No. / year of production: 2003 Nomin ... more

Category: 209: other wood working machines
New in: used
Price: 1.250 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
Category: 209: other wood working machines
New in: 1999
Price: 1.450 €
Location: Land-de DE 40721 Hilden, Neustraße 45
Seller: Achte display system GmbH

Aspirator AIR JET 160 (mobile) for wood shavings and wood dust. For commercial use. Technical data Nennvol.-power: 1750 m³/h Min. vol.-power: 1447 m ³/h Suction NW: 160 mm Vacuum V/min: 1320 PA Motor nominal power: 2,2 kW Nenndrehz.: 2850 1/min DL connection: Max 8,5 bar Protection class: IP 54 Filter: Cat. GEL art.-No.: 10 022 more

Category: 209: other wood working machines
New in: used
Price: 1.050 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
Category: 504: sieving machines
New in: 2018
Price: 5.390 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

MATEC-Vibrorinnen from our own development and production running lightly and quietly and transport Schuettguter and individual loads up to 250 kg with minimal energy over long distances up to 12 m at a time with a hand drill 300 w power consumption. The combined forced - and promotion of resonance stores the kinetic energy in the spring and must compensate for only the frictional resistance of the material. Sawdust, metal chips, gravel, Earth, grain, hay and grass, etc. are exactly equal soon transported with approximately 17 m / min. by means of Frequenzumforner the speed can be adjusted. The transport and screening in a single operation with a built-in sieve base perforation on reque ... more

Category: 209: other wood working machines
New in: used
Price: 2.750 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
Category: 109: other metal working machines
New in: used
Price: request quote
Location: Land-de DE 57080 Siegen, Eiserntalstr. 235
Seller: MPS Frank Müller

hydraulic highly stable scissor lift table as height-adjustable work bench / coffee table industrial design! No China ware! The table is pumped up by means of foot pedal The glaring Vice on the lift table does not belong to this (other auction) 2 of these lifting tables are in stock (other auction) Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, information and prices and subject to prior sale!) more

Category: 108: welding machines
New in: used
Price: 580 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
Category: 104: grinding machines
New in: used
Price: request quote
Location: Land-nl NL 8531 Lemmer, Kadijk 6
Seller: Valk Machines B.V.

Table speeds: 3,000 Umd.min Motor connection: 380 volts Equipped with: - emergency off - double grinding head - connection for dust extraction more

Category: 209: other wood working machines
New in: 1983
Price: 2.250 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
Category: 107: sheet metal working
New in: 2017
Price: request quote
Location: Land-in IN
Seller: GINDUMAC GmbH

OVERVIEW Brand: Hindustan Hydraulics Model: EHP 150 Application Type: Bending Machine Type: Bending machines Availability: Immediately Production Year: 2017 Location: India Origin Country: India Production Hours: 2400 GENERAL DATA Measurements width: 4700 mm Measurements depth: 1500 mm Measurements height: 2900 mm Machine weight: 12000 kg CONTROL UNIT Brand: Delem Model: DA-52s CNC main language: English CNC language customizable: Yes MAIN DRIVE Pressing force: 150 kN Bending length: 4300 mm MEDIA Main electronic connection: 400 V Power consumption: 11 kVA See full technical specifications of this machine at: abc://bit.ly/2NKVgvb more

Category: 209: other wood working machines
New in: 1988
Price: 2.750 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
Category: 503: shredders
New in: 2018
Price: request quote
Location: Land-at AT 5400 Hallein, Salzachtalstraße 51
Seller: AGICOM-Pedergnana OEG

Our industrial cutting tool range is designed for a wide range of industrial applications. The cutter of the model of ICU 10 A 10 has cable blades with special blade Guide. Therefore this cutter especially for applications is how: cable recycling and cable production: telephone cables, underground cables, electric cables and steel cable. â?¢ User friendly and ergonomic rotation system â?¢ The flat lever/hinge pin design allows optimum Range â?¢ Fast for an efficient (production) process â?¢ Longer torque thanks to permanent backup of the main Stud â?¢ Various blade types available -Cutting capacities up to ca. 24, 7 t  ... more

Category: 209: other wood working machines
New in: used
Price: 2.800 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-de DE
Seller: Pick Bäckereimaschinenhandel

It is a used, reconditioned Kemper Spiral mixer SP 50 L for sale. It is for about 80kg of dough / 50kg of flour. The machine has a stainless steel spiral and a stainless steel bowl. It is mobile, has 2 time clocks and 2 speeds. The machine has a dust cover. The spiral mixer is fully functional and runs quietly. The bearings and belts of machine are renewed. The machine has been repainted. Dimensions: Width: 75cm Depth: 110cm Height: 120cm Weight: 450kg Price on request. more

Category: 209: other wood working machines
New in: used
Price: 750 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-de DE
Seller: Pick Bäckereimaschinenhandel

It is a used Kemper spiral mixer ST 75 A with 2 x bowls for sale. The spiral mixer is for approx. 120kg dough / 75kg of flour. The machine has a stainless steel spiral and two stainless steel boiler. It is mobile, has 2 time clocks and 2 speeds. The machine has a dust cover, the machine head can lift buttons control and reduce. The spiral mixer was completely overhauled four years ago, is fully functional and runs quietly. Price on request. more

Category: 209: other wood working machines
New in: used
Price: 1.050 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
Category: 107: sheet metal working
New in: 2001
Price: request quote
Location: Land-de DE Baden Württemberg
Seller: METEC GmbH

Punch laser combination machine Make: Trump card Type: TRUMATIC 6000L-1600 Year of construction: 2001 Hours of operation: 54.341 h / 12 h 015 Control: Siemens Sinumerik 840 d Laser power: 3200 Watts Punching power: to 22. Work area: 3085 x 1650 mm Maximum sheet thickness: 8 mm Maximum workpiece weight: 230 kg Maximum punching diameter: 76.2 mm Dimensions: Lxwxh = 9100 x 7900 x 2400 mm Weight: 22,500 kg Accuracy: +/-0.10 mm Standard equipment Sturdy C frame Coordinate management with integrated linear magazine Tool places: 17 Clamps: 3 Drives: Maintenance-free three-phase servomotors Programmable presser to set up Sensor-controlled part slides 500 x 500 mm for punch ... more

Category: 1108: spare parts
New in: used
Price: 220 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
Category: 405: pillow packs machines
New in: 2013
Price: request quote
Location: Land-ch CH
Seller: MVRG UG (haftungsbeschränkt) & Co. KG

Condition: like new Availability: as of now Capacity: up to 7200 cycles/h Description For beginners in the area of flow, the flow X-e is the ideal tool. At a very attractive price, it offers all the features of the large machines such as a rotating cross welding set, a Servoachs control and an adjustable form shoulder for high flexibility. All parts that touch the product to be packed, are made of stainless steel, she can be used in the food industry. And of course also in numerous other industries. Characteristics of Hugo Beck flow X-e Length: from 30 mm Width: from 10 to 220 mm Height: up to 80 mm Capacity: up to 7200 cycles/hour more

Category: 209: other wood working machines
New in: used
Price: 150 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
Category: 201: saws
New in: 2002
Price: 7.500 €
Location: Land-de DE 40764 Langenfeld
Seller: Tischlerei Bracht GbR

Hema band saw UH 800 800 mm roll diameter and Panhans APA guides Drive motor amplified 5, 5kW with automatic motor brake Table 900 x 900 mm planed cast massive attack of widths Blade tension indicator Cutting height of 510 mm Cutting width of 780 mm Panhans APA guides above and below Blade length approx. 5600 mm 3 sharp blades and a used Dust nozzle 100 and 120 mm Chassis Operating instructions CE mark The upper hood was slightly dented and was split. Machine is partially after painted. Very well maintained condition. Dimensions CA. 1550 x 950 x 2500 mm (Lxwxh). Weight 750kg. Please the PDF file with our terms and conditions and order form. The machine can be demons ... more

Category: 209: other wood working machines
New in: used
Price: 150 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
Category: 307: rubber machines
New in: 1990
Price: request quote
Location: Land-uk UK Thornton, Hillhouse Business Park
Seller: Euro Rubber Lines

QTY 1 x Pomini VIC1.8-PX1.6 Tandem Lab mixer, Machine number 9912, date 1990, Modern frame design with unitized fabricated steel base, Anti friction roller bearings with floor lubrication, 22kW DC variable speed motor. Rotor speeds 0-230rpm Torque montioring sensors. Siemens PLC control system with S7-300 CPU (combined with original S5). Desktop computer interface. Left hand mixer: Pomini PX1.6 tangential rotor type, Volume 1.6Litre, 2 wing rotors, FY type bronze dust seals, Jacketed chamber for heating or cooling, Hard Chrome plated chamber and rotors, Chamber sides can manually swing open for cleaning/maintenance (by removing 4 bolts on each side), Pneumatic oil injec ... more

Category: 209: other wood working machines
New in: used
Price: 150 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
Category: 1300: other machines and plants
New in: 2009
Price: 15.500 €
Location: Land-de DE 51688 Wipperfürth, Hansestr. 28
Seller: Krüger Industrieautomation GmbH

ABB IRB 6640 M2004 industrial robots! -revised and tested industrial robot, available in standard or premium quality (on request 6monatige component warranty possible) -Year of construction 2009 -Control IRC 5 -Load capacity of 180 kg -Working RADIUS 2550 mm -with harness and manual control unit - tested, very good condition -several other robot types in stock Gladly, we offer the complete integration of the robot in its manufacturing process. We have always used industrial robots in many designs in stock! We perform robot training for Fanuc, KUKA, ABB robots in our home or alternatively in their operation. more

Category: 209: other wood working machines
New in: used
Price: 150 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
Category: 501: granulation plants
New in: new
Price: request quote
Location: Land-at AT 4924 Waldzell
Seller: Wilhelm Freudlinger Werkzeuge und Maschinen

Styroporshredder Styro cut 500 is a device for shredding (pelletizing) of styrofoam (EPS) The packing particles are sucked by the device automatically. The device reduces the storage space by 70-80% and thus also the storage and transport costs. Not contaminated ESP granules can be used in the production of new products from ESP as a filling material in the Furniture industry or in the field of agriculture to the loosening of the Earth. Not contaminated ESP granules can be used in the production of new products from ESP as a filling material in the furniture industry or in the field of agriculture to the loosening of the Earth. Slightly contaminated EPS granules are in the const ... more

Category: 703: meat and fish processing machines
New in: used
Price: 550 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: