dust used for sale

Manufacturer: Venti Oelde, Type: EC 35-2-AS, Year: 1992, Filter system - positive pressure: yes, Volume flow rate m³/h: 7500, Filter surface in m²: 70, Filter hoses: Polyestergewebe, Qty. filter hoses: 40, Electronic control board: 1, Suction pipe diameter 1 mm: 15, FREE TEXT: inkl. Schaltschrank, Year :1992

Manufacturer: Sorbini, Type: VA/32-AT, Year: 1999, Number of units: 1, kW Leistung Motoren: 1,2, Working width mm: 1350, Operating side: links, Wight approx. kg: 1260, Year :1999

Manufacturer: Filteranlge, Control: yes, Year: ca.2000, Filter system - positive pressure: yes, Volume flow rate m³/h: ca.30000, Filter surface in m²: 280, Number of filter filter gallerys: 1, Return air capable: yes, Vibrator motors: yes, Star feeder: yes, Electronic control board: yes, Number of fans: 2, 1st transport fan - bunker kW: yes, Suction pipe diameter 1 mm: 560, 2nd Exhaust fan kW: ca.22, Year :ca.2000

Manufacturer: Ernst , Type: AB 1 1300, Year: 1982, Control: no, Compressed air cleaning: yes, Number of units: 2, Units mounted upright: yes, Roll transport: yes, Feeding speed continous adjustable: gekoppelt an Schleifmaschine, rotor jets: Kanal, FREE TEXT: Arbeitsbreite 1400/Arbeitshöhe 80/inkl.Turbine, Year :1982

Manufacturer: R + R, Type: Unterdruckfilteranlae, Control: Siemens, Year: 2015, Filter system - negative pressure: yes, Volume flow rate m³/h: ca.22000, Number of filter filter gallerys: 2, Return air capable: yes, Cleaning of scavenging air: yes, Star feeder: yes, Electronic control board: yes, Number of fans: 1, Fans frequency-controlled: yes, 1st transport fan - bunker kW: 15, 2nd Exhaust fan kW: 37, machine ready for demonstration: yes, Year :2015

Manufacturer: Höcker Polytechnik, Type: S 200, Year: 1985, Volumenstrom m3/h: 2850, Fan kW: 3 kW, Year :1985

Manufacturer: Giardina, Type: G 84/20, Year: 1994, Control: yes, Brush type: gekordelt, Diameter of brushes: 150, Compressed air cleaning: yes, Number of units: 2, kW Leistung Motoren: ca.2, Number of rotations controlled: yes, Fast exchange device: no, Working width mm: 1400, Through running hight mm: 150, Vacuum belt: no, Feeding speed continous adjustable: yes, Feeding speed min-max m/min: 7-21, kW-Vorschub: ca.1,5, Operating side: rechts, Product detection: no, Electrical hight adjustment: yes, rotor jets: yes, Year :1994

Manufacturer: unbekannt, Type: Entstaubung, Year: ca.1990, Control: yes, Compressed air cleaning: doppelseitig, Number of units: 2, kW Leistung Motoren: ca.5, Units mounted upright: yes, Working width mm: 1300, Through running hight mm: 120, Roll transport: yes, Feeding speed continous adjustable: yes, Feeding speed min-max m/min: 5-20, kW-Vorschub: 0,5, Operating side: rechts, Ionising: eingebaut, Year :ca.1990

Manufacturer: Wipos Filteranlage, Type: ME 22 S, Year: 1995, Filter system - positive pressure: yes, Volume flow rate m³/h: 4100, Filter surface in m²: ca.50, Hose diameter in mm!: ca.150, Length of filter tubes: ca., Return air capable: no, Vibrator motors: yes, Star feeder: 3, Number of fans: 1, 1st transport fan - bunker kW: 5,5, Year :1995

Manufacturer: Astra Aspirazioni Due, Year: 2015, Volume flow rate m³/h: 24000, Filter surface in m²: 180, Qty. filter hoses: 84, Hose diameter in mm!: 200, Length of filter tubes: 3400 mm, Number of filter filter gallerys: 1, Required space L x W x H mm: 1890x7550, Weight approx. kg: 2300 + 1050 (ventilator), Year :2015

Manufacturer: IPE, Control: Programm, Year: ca. 2000, Filter system - positive pressure: yes, Volume flow rate m³/h: 4000, Filterfläche m²: 20,5, Number of filter filter gallerys: 2, Rückluftfähig: yes, Cleaning of scavenging air: Druckluft, Electronic control board: yes, 2nd Exhaust fan kW: 4, inkl Brikettpresse RSN, Year :ca. 2000

Sawdust extractor IMAS DS3/55 Number of collective bags: 3 Number of filter bags: 3 Inlet diameter fi 250mm Extraction power 4kw CE Certified Dimensions 2240x510x2250mmh

Sawdust extraction 7.5kw Number of filter bags: 4 Number of collective bags: 4 Motor power 7.5kw Capacity about 7500m3 Diameter of the spigot fi Dimensions 345x71x360cmh

Type: T 0.56-280/D Year of construction: 1995 Condition: used, cleaned and completely refurbished! Technical details: • Flow rate exhaust fan: 4150 Nm³/h • Ptot./Pa.: 3000 • Fan speed: 2900 rpm

Fritsch MSG-0700-2 Flour duster 2012, stainless flour duster, mounted on stainless frame, duster width 620mm, variable speed, mobile, 1Ph

Description: 90 x Batten light 120W LED - Daylight 6500K - 120cm dustproof - dim: 1200 x 38 x 61mm - AC (185 - 265V) 50/60Hz - Lifespan 9000 hours - Beam angle: 120 degrees - Suitable for indoor use. Approx. Onsite Dimension. (l x w x h): 800 x 1,200 x 750 mm, weight approx.: 75 kg

Description: 100 x Batten light 36W LED - 120cm - Daylight 6500K - IP20 dustproof - dim: 1200 x 38 x 61mm - AC (185 - 265V) 50/60Hz - Lifetime 30000 hours - Beam angle: 120 degrees - Suitable for Indoors. Approx. Onsite Dimension. (l x w x h): 800 x 1,200 x 1,500 mm, weight approx.: 180 kg

Description: 100 x Batten light 36W LED - 120cm - 4000K Neutral white - IP20 dustproof - dim: 1200 x 38 x 61mm - AC (185 - 265V) 50/60Hz - Lifespan 30000 hours - Beam angle: 120 degrees - Suitable for indoor use Approx. Onsite Dimension. (l x w x h): 800 x 1,200 x 1,500 mm, weight approx.: 180 kg

Description: Various random orbital sanders , with mobile extraction unit , Additional accessories Sanding discs in various grit sizes, mostly unused Vacuum cleaner bags suitable for extraction system Including cabinet Approx. Onsite Dimension. (l x w x h): 1,200 x 1,000 x 1,900 mm, weight approx.: 100 kg

Description: designation: ,pure air power: ,1.5 kW Approx. Onsite Dimension. (l x w x h): 1,600 x 650 x 600 mm, weight approx.: 200 kg

Description: Output: max. 3,150 m³/h Negative air pressure: max. 2,250 PA Voltage: 3 x 400 V Motor power: 3 kW Waste container volume: 72 l Compressed air consumption: 73 Nm³/h Suction nozzle: 1 x 160 mm / 1 x 200 mm Approx. Onsite Dimension. (l x w x h): 1,100 x 1,100 x 2,700 mm, weight approx.: 260 kg

Description: Machine no. 148-23 The machine has had 3 months of irrregular use , See attached PDF for more information on this machine. Approx. Onsite Dimension. (l x w x h): 3,147 x 1,120 x 2,380 mm, weight approx.: 1,740 kg

Rademaker Flour duster Serial: 7118-720 2007 Stainless flour duster, roller length 1000mm, discharge height 1400mm,

NNP Flour duster Stainless flour duster on mobile C frame, variable speed, 600mm duster width with insert for smaller widths, 3Ph

Extraction filter system, Manufacturer: ESTA, Type: Dustmac F-126 W3, Year of manufacture: 2019, Serial No.: 19002517, Condition: 1 stand kinked, Machine weight: approx. 630 kg, Filter area: 126 m², Dimensions (WxHxD): approx. 183x304x131 cm

intake connection: 200mm; Maximum volume flow: 1770 m³/h; nominal volume flow: 2780 m³/h; Vacuum: 1580 pa; filter area: 13 m²; filter regeneration: pneumatisch; chip bag volume: ca. 380l; motor power: 3 kW; machine length: 2000 mm; machine width: 800 mm; machine height: 2200 mm; weight: 240 kg; The deduster is suitable for extracting dry wood dust and dry wood chips on individual dust sources. this is also valid for oak and beech wood dust. Furthermore, metallic, ceramic mixed, organic dusts of the dust ex plo sions class St1 and St2 be sucked off. If the dust extractor is properly handled by a woodworking machine with a dust source (eg circular saw, milling machine, planer machine, belt grinder) and locked in accordance with the rules operated, is the necessary extraction performance and separation quality always guaranteed. When extracting a dust-proofed woodworking m ...

Multivalent steam boiler system 2 x 10 MW, AS NEW For dusty fuels or natural gas H. 2 identical lines: Single-flame tube boiler with economiser Fuel so far: lignite dust Calorific value Hu: 22,190 kJ/kg Ash content: 3.0 % – 3.5 % Rated thermal input: 19.5 MW FWL (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation Preset also for natural gas operation H Calorific value HS: 11.4 kJ/Nm³ (calorific value Hi 10.4 kJ/Nm³) Rated thermal input: 19.5 MW (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation The change of the burner operation is carried out by changing a fitting piece on the burner. Boiler 1 and boiler 2 can be fired at the same time with different fuels. If desired, the contents of both fuel silos can also be b ...

Aigner Air Jet 4 - Abrasive dust extraction Dry sanding of various materials often produces dust that is harmful to health. An effective solution for this is the use of an abrasive dust extractor. This device reduces dust emissions and helps to comply with the particulate matter limits: 5 mg/m³ in Austria and 1.25 mg/m³ in Germany. - Aigner Air Jet abrasive dust extraction - EC pipe extraction arm - Powder extinguishing system with detection line - incl. documents - Year of construction 2020 Specification - Max. air flow: 5000 m³/h - Max. pressure: 5000 Pa - Filter: 4x 13 m² - Dust: 10 g/m³ - Nominal power/current: 7.5 kW / 35 A - Nominal voltage: 3x 400 V - Net weight: 560 kg

Esta Eurosog W/H 80.299 Industrial vacuum cleaner As a powerful industrial vacuum cleaner, the EUROSOG-W is suitable for coarse, dry, fine and free-flowing dusts. The AC version is designed for sporadic use during cleaning work in workshops. Its smooth-running rollers provide the industrial vacuum cleaner with a high degree of mobility. The spacious dust collection container has a capacity of 80 litres. Thanks to the patented tipping device, the dust can be disposed of effortlessly. Areas of application for EUROSOG industrial vacuum cleaners: AC version for sporadic use For dry, coarse and fine dusts For cleaning processing machines For general cleaning work (e.g. workshop floors) Can be used in many industries (e.g. wood and metal industry) Metal industry Construction industry Wood industry Chemical Printing industry Flocculation industry Cleaning industry Ha ...

KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization)  ...

General SKU308T739 LocationBarneveld MakeAllgaier Werke TypeWS-GT-0,75 No.280 Year of construction2004 Main Features MaterialStainless steel Surface0.44 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surfaceapprox 0,44 m2 With fancheck With dust filtercheck Heating unit (steam)check Max. temperature300 °C MaterialStainless steel, Stainless steel 1.4301 (304) Information CEcheck With switchgearcheck (as is) Extra SpecificationsFluidized Bed Spray Granulators from Allgaier can be used to produce solid and dust-free granules from liquid starting materials such as suspensions and solutions. The remaining dust and powders can be further processed into easily soluble instant products. The machine is particularly suitable for processing urea granules, yeast, gelatin granules, and water jars. Functionality:During granulation, the solids-c ...

Specifications: Tested load capacity: 1,000 kg according to ANSI MH 26.2 Clear span: 1,000 mm for stand depth: 1,100 mm Assumed truss width: 50 mm Indoor use only The scope of delivery includes: Wireframe, new Material color: sendzimir galvanized Design: placed shelf gratings, folded on both sides Width: 1,112 mm Length: 890 mm Mesh size: 106 x 53 mm Wire thickness: 3.8 mm Number of beams: 7 pcs. Unit weight: approx. 7.53 kg Application: Compartment size/ modules required per subject 1,100 x 1,800 mm/ 2 pcs. 1,100 x 2,700 mm/ 3 pcs. 1,100 x 3,600 mm/ 4 pcs. Heat dust leche: On request we can provide you with heat dust (see pictures) offer for sale; Prices on request. Fire protection places special requirements. Therefore, the wire mesh can be provided with a welded heat dust lech. And if you need a slip-through protection for cardboard boxes, the  ...

Specifications: Tested load capacity: 500 kg according to ANSI MH 26.2 Clear span: 1,000 mm for stand depth: 1,100 mm Assumed truss width: 50 mm Indoor use only The scope of delivery includes: 01x wireframe, new Material color: sendzimir galvanized Design: placed shelf gratings, folded on both sides Width: 1,112 mm Length: 890 mm Mesh size: 106 x 72.5 mm Wire thickness: 3.8 mm Number of beams: 4 pcs. Unit weight: approx. 5.14 kg Application: Compartment size/ modules required per subject 1,100 x 1,800 mm/ 2 pcs. 1,100 x 2,700 mm/ 3 pcs. 1,100 x 3,600 mm/ 4 pcs. Heat dust leche: On request we can provide you with heat dust (see pictures) offer for sale; Prices on request. Fire protection places special requirements. Therefore, the wire mesh can be provided with a welded heat dust lech. And if you need a slip-through protection for cardboard boxes, ...

The new 19-inch Rack PC SIMATIC IPC847C is equipped with the latest 2010 Intel Core processor technology (Intel Core i). The high computing power and PCI-Express technology make the IPC847C the perfect platform for high-performance applications, such as in measurement technology in test benches or in industrial image processing. The SIMATIC IPC847C also offers maximum system availability, expandability and compactness in 19" IPC technology: - optimal storage space utilization and data security with RAID5 - optional redundant power supply (AC) - Extensive diagnostic and monitoring options - Universal use for industrial workstation and server applications - Variety of integrated interfaces and expansion slots - Lower installation depth for installation in space-saving control cabinets of only 500mm depth The Rack PC is available as a control cabinet device for horizontal and ver ...

System Components: ​ Control Panels (in control room) Washing Unit - 1 set Control Panel Centrifugal Ventilator - 22KW Booster Pump System - 15HP Pre-Heater - 780,000Kcal/hr - 1 set Control Panel Shot Blast Machine - 1 set Control Panel Bucket Elevator - 2 sets Air Receiver Tank - 3cu.m Dust Collector - 1000cu.m/min Dust Collection Buckets Water Paint Booth - 1 set Control Panel Air Motor - 100PSI - 3 units Air Diaphragm Pump - 1 unit Mixing Bucket - 2 units Paint mixing tools and jigs Activated Carbon Tower - 400cu.m/min 1 set Dry Oven - 300,000Kcal/hr Control Panel Marking Unit - 1 set Control Panel Rectifier IN/OUT Conveyor - 4.6MW x 230.95ML Control Panel ​ Accessories/other items included: Portable Vacuum Recovery - 1 unit Fan - 11KW; 3P; 440V; 60Hz Exhaust Fan - 1,646W; 220V CO2 Mag Welders - ProPAC600A - 3 units Gouging Machine - LH ...

: 1860 m³/h : Pressung 2.900 Pa : 1,1 kW filter surface area: 10 m² : 72 dB(A) : 400/50 V/Hz : 665 x 1100 x 1495 mm : 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system --------------------------------------- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class W3 (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good clean ...

BYSTRONIC BYSTAR 3015 4.4 kW laser, manufactured in Switzerland in 2012 is designed for cutting metal sheets made of black steel, stainless steel and aluminium. Workpieces with a maximum thickness of 25 mm (black steel), 20 mm (stainless steel) or 12 mm (aluminium) are machined with the highest precision and quality, using a 4.4 kW laser beam emitted by a reliable BYSTRONIC ByLaser 4400 laser source. The laser cutting machine is characterised by a large working area made of high-quality steel, with a length of 3000 mm and a width of 1500 mm, allowing for easy loading of workpieces with a maximum weight of 890 kg and ensuring high stability during the cutting process. The machine is controlled via an arm-mounted control panel with installed BYSTRONIC ByVision numerical control. The laser has been continuously repaired – the following components have been replaced during the use of ...

MAZAK SUPER TURBO X48 MK II laser was built in 2001 in Japan. The compact laser cutting machine is designed for precise cutting of pre-programmed shapes in sheet metal made of structural steel, stainless steel and aluminium. The machine’s small dimensions and components integrated into the machine frame, such as the chip conveyor and the MAZATROL L32B CNC control, allow it to be used to its full potential both in small factories and in series production. The MAZAK ST-X 48 MKII gas cutting machine can process sheets with a maximum thickness of 15 mm (S235 structural steel), 6 mm (stainless steel) and 3 mm (aluminium). High cutting speed as well as excellent machining quality and accuracy over the entire working area at low operating costs are achieved thanks to the YB-L150A 8M resonator, characterised by high energy efficiency, allowing the laser beam power to be adjusted in the rang ...

TECHNICAL SPECIFICATIONS Manufacturer: BENNINGHOVEN (WIRTGEN GROUP) Designation: Filter dedusting for asphalt plants Version: Stationary Year of construction: 2016 Power (volume flow): 72,000 Nm3/h Drive motor exhaustor: 132 kW (incl. frequency converter) Filter throughput: 100,994 Bm3/h Filter area: 1,109/1,072 m2 Ration: ≤ 1,6 m3/m2 min. Dust emission: max. 20 mg/Nm3 (with a maximum raw gas dust load of 250 g/Nm3 Füllertrogschneke (capacity): 25 t/h Number of filter bags: 480 pcs. SPECIFIC COMMENT Complete dust collector for asphalt mixing plants essentially consisting of: - Raw gas channel - Fresh air flap - Pre-separator - Filter unit - Dust collecting hull - 2 x filler snails - Filter bags - Support pistons -Cleaning - Clean gas duct - Extraction fan - Filler screw - Electric cabinet and control systems - Stairs, stage and accessories

One (1) PER-FIL® Industries Model MF MICRO-FILLER, portable Auger Filler. The MF is designed for safe, accurate and dust-free dispensing of customer's product nto designated container. STANDARD FEATURES: Variable speed auger and agitator drive system, 0.5 hp permanent magnet, totally enclosed and non-ventilated motor with heavy duty gear reducer. 12" diameter, 20 liter stainless steel hopper mounted with quick disconnect hand knobs. Hopper is positioned with locating pins for convenient removal and positive assembly. Stainless steel NEMA 4X dust and water proof electrical enclosure securely mounted to the frame of the filler. Enclosure includes PLC and touchscreen operator interface for simple adjustment of all filler parameters and allows operator to save settings as a "RECIPE." Up to 30 recipes can be stored in the operator interface. Variable speed auger drive control ...

1) Powder Mixing Plant Consisting Of: -n°2 Powder Dispensers+clochee For Dust Extraction; -n°1 Horizontal Mixer For Dosing Powders, Complete With Extraction Vents And Dust Filters; -n°2 Horizontal Mixer Accumulation Dust Materials Mixed, Complete With Extraction Vents And Dust Filters; - Support frame plus ladder. -almost new, used for a few hours. 2) Bl Packaging Machine For Plastic Bags 5/30 Kg: - Packaging Machine With Horizontal And Vertical Sealing Bars; - Complete With Electrical Panel And Support Frame. 3) Vertical Bucket Elevator: - Bevini brand; -mod. et4; - Measures 1.15m x 0.55m; - Height 6.70 m; - Almost new, used for a few hours.

0: 250 mm 0: 3530 m³/h 0: 2500 pa Dimensions (L/W/H): 3.350x1.020x2.290 mm engine output: 5,5 kW turning speeds: 2800 U/min compressed air: Pmax 8,0 bar weight: 1100 kg Nestro dust extractor NE 250 W For sale on behalf of the customer ex location -------------------------- Manufacturer description: Dust extractor with pneumatic shaking and automatic water extinguishing system Including suction nozzle d=300 mm, 5 m cable with plug and reversing switch, electric motor 5.5 kW 400V/50 Hz, on/off switch, potential-free Contact for machine monitoring, motor protection switch, Pressure difference display, 3 mobile dust bins Clamp bracket, 3 chip collection bags (PE) 600x600 mm, i=1100mm Housing made of galvanized sheet steel Technical data: Nominal volume flow 3,530 m3/h associated negative pressure 2,500 Pa Suction side connection d=250 mm Continuous operation mode Type of current: three-phas ...

Thank you for your interest in our gum extruder system we offer you as follows: many thanks for your interest on our new chewing gum extruder plant, please follow our offer find: AUTOMATIC EXTRUDING; ROLLING AND SCORING MACHINE 7 ´ ´ /. COMPLETE LINE for production of chewing gum sticks and Chiclets Manufacturer: WLS Type: Chewing gum Extrudier-, rolling and cutting machine gum extruder, rolling and cutting system Product: Chewing gum sticks and Chiclets Size (working width): 7 ´ ´ / 177mm other dimensions are possible on demand Type: WLS RAS 7 "with manual take-off Capacity: Approx stick gum. 200-250 kg / h / Chiclets approx. 250-350 kg / h Number of rolling stations: 4 Number of cutting stations: 2 Electrical: 400V 3 ph 7 "ROLLING AND SCORING MACHINE incl. EXTRUDER Conveyor belt is covered with powderin ...

RLA 160 Extraction system Dust nozzle diameter: 160 mm Engine: 2.2 kW 400 V 50 Hz Nominal volume flow at the nozzle: 1448 m ³/h Maximum flow rate: 2400 m3/h Filter surface: 9,21 m² Dust class M Residual dust content: H3 Chip collecting volume: 2 x 165 (193) l The maximum sound pressure level: 73 dB (A) Dimensions (L x W xH): 1755 x 830 x 1654 mm Weight: 267 kg G & pieces 5131620

1 PAAL horizontal tunel press type PAC, year 1997, tunel section 60 x 70 cm, bale measuring, tying through 4 horizontal wire insertion, machine was used for pressing textile waste dust, with dust suplying cyclone, by removing dust cyclone it can be used for pressing any material

Ref.-No. 00579 Z1 Description Used intensive mixer Manufacturer Eirich Type R08 Built in 1995 maximum filling 60l / 90kg Industry 7322 Granulating zinc oxide dust Control Not available Machine description - R08 (mixed material temp. max. 80°C) - Star-tangle tool; 4-stage; Li.-Run - Wirbler drive power: 5.5kW - Wirbler drive speed: 1000 rpm - Wirbler rotation direction: Left-hand run - Wirbler speed: 340 rpm - Wirbler circumference speed: 6.2m/s - Wirbler drive type: V-belt - Mixing container drive: friction wheel Type of wear - mixing container with soil wear segments + Wear wall - Star-wire tool with armor - Wall scrapers with armor Accessories - Storage vessel V=115l with Ebro shut-off valve DN200 and Vibration motor - Ebro shut-off valve DN150 on mixing container cover mounted (transition) - Dosing conveyor screw for zinc oxide filter dust, incline  ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Mikro Classifier CC22, from our former generation previous to our current technological evolution. This air classifier can operate off-line as a stand alone system or in-line as the perfect companion for a Hosokawa Alpine ACM 10 or ACM 15 impact classifier mill, to ensure no undesired fine dust particles are present in the final micronized product, usually in the ...

PONAR ŻYWIEC SG-180FE-2B plastic mill built in 2011, is designed for crushing of plastic waste. Made of high quality steel, the plastic mill with dust exhaust ensures high rigidity of construction, high efficiency and long service life. The main advantages of the device are its comfortable operation and low noise level during machine’s work. SG 180FE 2B granulator is equipped with 9 rotary knives and 2 fixed knives with a length of 180 mm, capable of milling up to 30 kg of plastic elements per hour. The machine is offered with dust extraction. Total weight of the machine is 120 kg. Technical data of granulator PONAR ŻYWIEC SG-180FE-2B - length of blades: 180 mm - number of rotary blades: 9 - number of fixed blades: 2 - capacity: 30 kg/h - maximum rotation speed: 940 rpm - throat depth: 200 x 220 mm - dust extraction - motor power: 1,5 kW - power supply: 380 V; 50 Hz - ...

BLASTING & PAINTING SYSTEM DMK Co. CONSISTING OF: Air Blast Units, Vacuum Recovery System, Silo Tank. Dust Collector, Bucket Elevator, Rotary Separator, Storage Tank, Chute Hopper, Vacuum Recovery, Collection Tank, Ventilation System; MAIN CHARACTERISTICS: SHOP B (2008/2009); DMK Co.; This system consists of blasting, conveying, restoring, and impinging facility; Room size: W: 50.000 x L:50.000 x H: 17.000; 16 Nozzles, cap 32 ton/hr; Turbines 1509 KW; Abrasive: Steel Grit 0,5mm -1,0mm; Initial Charge Grit: 300 Ton; PAINTING SHOP; Room size: W: 50.000 x L:50.000 x H: 17.000; Dry filtering method; Motor 960KW BLASTING SHOP Ventilation System Dehumidifier (YDHM-CDH-15,000-100) - 1 Unit Fan and blower 120hp - 2 Units per exhaust pipe - 4 units total Exhaust pipe for 120hp fan- 2 units Fan and blower 40hp - 1 Unit Exhaust pipe for 40hp fan - 1 unit Dust Collector Ma ...

VA stainless steel tank approx. 4000L with frame frame used Pressure tank filter tank suction air filter dust filter Tank height total approx. 2600 mm - of which approx. 700 mm funnel Tank diameter approx. 1600 mm Volume approx. 4000 litres Connection openings approx. 300 mm Connection flanges approx. 445 mm Flap on the side approx. 800 x 500 mm with lattice insert/dust grate in the inner bottom and top with bracket for dust filter very stable design Total L/W frame approx. 3100 x 2130 mm Total height approx. 3600 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.