1000 offers

maximum number of results exceeded > 1000
please refine your search

New in: 1995
Price: 1.980 €
Location: Land-DE Germany, 59846 Sundern
Seller: Czech Industrie Service

Mind. flow: 1830 m 3 / h Nominal flow rate: 2200 m 3 / h Air pressure: 6 bar Max for vacuuming combustible dusts Cleaning system: pneumatic Number d. cartridge filters: 4 PCs Type: B 1 = suitable of dust explosion class St 1 + St 2 Total power: 4 KW / 380 V Machine weight: 500 kg Equipment / Accessories: Chassis All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake. Each party has the opportunity to test the extraction system before making a purchase in our factory under power. more

New in: used
Price: request quote
Location: Leipzig 3
Seller: WMW AG

air flow rate: - m³/h,suction stud diamter: 160x45 mm,drive power: - kW,weight of the machine approx.: 68 kg,dimensions L x W x H: 650x600x2300 mm,dust suction device without fan (without suction mechanic) installed on a steel fram with 4 base stands, Filter: filter drum Dia.=360x520mm, rotatable manual, space of filter size W:580xWB:560xH:750mm -intake (suction) conection diameter 160x45mm (sideways) - dirt ejection diameter = 280x110mm , bottom opening - exhaust opening diameter=160mm ( ceiling) via flange bolted diameter=250mm and angular adapter dia. = 145mm more

New in: 2008
Price: 30.000 €
Location: Land-it IT Brandico (BS)
Seller: NTK EUROPE SPA

ABB FLEXPICKER: no. 4 x 4 IRB340 with controller no. 4 x room no. 1 x pendant no. 1 x machine housing more

New in: used
Price: request quote
Location: Leipzig 3
Seller: WMW AG

air flow rate: - m³/h,suction stud diamter: 150x80 mm,drive power: - kW,connection electric: 380-420 V,total power requirement: 0,35 kw,Dimensions (LxWxH): 950x500x680 mm,dust suction device with fan fan: size diameter 500x300mm, exhaust openning dia.=160mm Filter: 2 pieces size 300x120x500mm, space of filter size W:300xW:260xH:520mm intake (suction) diameter 150x80mm more

New in: 2005
Price: request quote
Location: Land-de DE
Seller: Andreas Fabig Maschinenhandel

Power: 9210 kW Live-steam pressure: 73 bar Live-steam temperature: 520° C Extraction pressure: 16 - 20 bar Exhaust steam pressure: 1,5 - 2,5 bar Generator: LDW GmbH 14040 kVA Trafo 15000 kVA more

New in: used
Price: request quote
Location: Leipzig 4
Seller: WMW AG

max. dia. of grinding wheel: 315 mm,revolution per minute: 1400 U/min,grinding wheel width: 40 mm,electrics - voltage/frequency: 380/50 V/Hz,with handrail: ja / yes / sí / sim,palm rest: ja / yes / sí / sim,total power requirement: 1,1 kW,weight: 230 kg,dimension machine approx.LxWxH: 1,0x0,55x1,15 m,At the moment installed grinding disc on the machine: diameter=220x40mm dust suction connection for tube diameter right/left= 1000x40mm last check 12/2010 more

New in: 2009
Price: 15.900 €
Location: Wipperfürth
Seller: Krüger Industrieautomation GmbH

KUKA KR 150-2 industrial robots! -revised and tested industrial robot, available in standard or premium quality (possible on request 6 months lasting component warranty) -Year of construction 2009 -Control KUKA KRC-2 Edition 5 -Load capacity 150 kg -Working RADIUS 2700 mm -with harness and manual control unit - tested, very good condition -several other robot types in stock Gladly, we offer the complete integration of the robot in its manufacturing process. We have always used industrial robots in many designs in stock! We perform robot training for Fanuc, KUKA, ABB robots in our home or alternatively in their operation. more

New in: used
Price: request quote
Location: Leipzig 1
Seller: WMW AG

grinding wheel diameter: max. 200 mm,voltage: 380/50 V / Hz,with handrail: jes,total power requirement: 0,9 kW,weight: 140 kg,dimensions L x W x H: 0,45 x 0,70 x 1,20 m,technical description: - dimension of grinding disc who is mounted on the machine Ø 190 x Ø 140 x 45mm (Cup wheel/disc) - grinding support approx. 10° swiveable LxB: 250x210mm - grinding protection left/right fixed - grinding dust suction Ø 40mm right/left accessories: - grinding disc dressing device On Sale as is! more

New in: 1986
Price: request quote
Location: Land-fi FI
Seller: ACONI Oy

Year 1986 75 kW motor. Feeding conveyor with metal detector. Dust collector. Available in August. more

New in: used
Price: used machinery auction RESALE 250 €
Location: Land-it IT Italy, 10061 Cavour
Seller: Surplex GmbH

Weight approx.: 20 kg Dimensions (l x w x h) approx.: 900 x 500 x 1800 mm Description: Power 1500 W more

New in: 2007
Price: 2.000 €
Location: Land-ro RO Oradea
Seller: Kuhn & Partner Romania SRL

Description Eco Brand Refrigerazione IDE 43B10 model ED ID 555804 Status Active Price €2,000 + VAT Year of manufacture 2007 Location Oradea, Romania Dual discharge industrial unit coolers Eco IDE 43B10 ED manufactured in 2007, recommended for applications in large cold rooms and refrigerated storerooms. Maximum air flow: 12300 m3/h, air throw: 2 x 14 m, heat exchange surface (ext./ext.): 83 m2, 3 fans (450 mm), electronic defrost (1500W). Lowest temperature: 35oC. ExWorks. Price is negotiable. Contact Tel.: + 359/40-175.575 Fax: + 40-259/426.248 Mobile: + 40-743/177.040; + 40-740/221.698 Technical inspection can be organized at least 24 hrs before the due dates W ... more

New in: 2005
Price: request quote
Location: Land-uk UK Manchester
Seller: PostIndustry

This listing is for a 2005 IMPACT AIR SYSTEMS 400PBL F/S Dust Extraction Fan. more

New in: 1999
Price: request quote
Location: Land-ee EE
Seller: IS Engineering Service

-industrial -year 1999 -3 bowls -2 tools -scraper -capacity 400L -condition seems clean and good Pictures on request. more

New in: 1988
Price: request quote
Location: Land-uk UK Manchester
Seller: PostIndustry

This listing is for a 1988 AIRMASTER RJX Dust Extractor with RHF MPCB8 Fan and Explosion Protetion System. Fan Speed: 2240 Fan Volume: 5400 more

New in: new
Price: 6.500 €
Location: D - Nordrhein-Westfalen
Seller: CNC Servicetechnik Sperling

Laser vapor extraction and filter systems FILTER BLOC TFK LA Series Special Central suction and filter systems for laser smoke the FILTER BLOC TFK LA series and CQC certified manufacturer according to ISO 15012 and CE drawing. FILTER BLOCK LASER 30/40/60 3KW/4KW/5 power, 5KW 2500/4000/4500 air volume m3 / h m2 filter surface 93/124/186 x 84 liter dust container 3/4 x 84 liters / 6 x 84 liter automatic jet cleaning system with testing for welding fume category W3 24 Months Warranty The price refers to the TCF laser 30 for more information on request; ready to use more

New in: 1988
Price: request quote
Location: Land-uk UK Manchester
Seller: PostIndustry

This listing is for a 1988 AIRMASTER RJX Dust Extractor with RHF MPCB8 Fan and Explosion Protetion System. Fan Speed: 2240 Fan Volume: 5400 more

New in: used
Price: request quote
Location: Land-ba BA
Seller: Unipak

KOLBACH fire place for hot water 120C 2,5mW with auto cleaner Very small working hours Auto feeding with saw dust Chimney All pipes and valves Electronic BRUKS hammermill 75kW With infeeder and outfeeder (input and output transporter) Section for iron detection Silo 200m3 with KOLBACH pushing out system All 4 fans and pipes and cyclones Price on request more

New in: 1988
Price: request quote
Location: Land-uk UK Manchester
Seller: PostIndustry

This listing is for a 1988 AIRMASTER RJX Dust Extractor with RHF MPCB8 Fan and Explosion Protetion System. Fan Speed: 2240 Fan Volume: 5400 more

New in: 2005
Price: request quote
Location: Land-tr TR Istanbul
Seller: Almetay Makine Plastik Metal Yapi Elm.San.Tic.LTD.

Automatic saw SA 73/36 Description Suitable for high-volume cutting of aluminium profiles for window manufacturing and industrial applications Material infeed (cycling) protects the surface of the workpiece by means of a single-stage profile lifting system One, two or three-stroke feed can be selected using a selector switch Reliable material feed using two horizontal clamping cylinders Automatic machine shut-down at the end of the profile Pulsed coolant system Equipped with saw blade as standard Technical specifications Cutting range 150 x 110 mm Saw blade diameter 380 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW Compressed air supply 7 ... more

New in: 2007
Price: request quote
Location: DE-34414 Warburg
Seller: Tipp Umwelt- und Verfahrenstechnik GmbH

WAM GROUP dust filtration unit with cartiges and cleaning unit; used - good more

New in: 2006
Price: request quote
Location: Land-tr TR
Seller: Almetay Makine Plastik Metal Yapi Elm.San.Tic.LTD.

Double mitre saw DG 104 Description The optimal double mitre saw for series production as well as for special applications The universal pivoting and tilting of both saw units allows cutting of high and wide profiles as well as every type of compound mitre. Consequently, many profiles can be cut without support blocks External-dimension cuts possible for all cutting variants. Consequently, no complicated length calculations are necessary. This is a big advantage when cutting special angles Pivoting range with digital angle display Safety hoods Equipped with saw blades as standard Equipped with digital display E 111 as standard Pulsed coolant system Technical specifications Min ... more

New in: 2000
Price: request quote
Location: Land-de DE
Seller: Kiesel Worldwide Machinery GmbH
New in: 2015
Price: request quote
Location: Land-tr TR Istanbul
Seller: Almetay Makine Plastik Metal Yapi Elm.San.Tic.LTD.

SELECTA 3 - Double head cutting off machine Home / ABCD Machinery – Machines for processing Aluminum Steel and PVC / SELECTA 3 – Double head cutting off machine SELECTA 3 High quality double head cutting off machine with a fixed sawing head on the left and automatic right head movable by numeric control with upstroke blades. Rotation and tilting of both blades for compound cuts. Brushless motor for the positioning of the movable head. Automatic pivoting inwards/outwards heads by brushless motor 22,5°90°-140°. Automatic tilting range inwards of the saw blades 90°-45°, with 2 TCT Saw blades Ø600mm. Motor power 3Kw each, lubrication by micro drop with pure oil, full prot ... more

New in: used
Price: used machinery auction RESALE 180 €
Location: Land-it IT Italy, 46040 Guidizzolo
Seller: Surplex GmbH

Weight approx.: 100 kg Dimensions (l x w x h) approx.: 500 x 900 x 1600 mm Description: Tabletop size 390 x 360 mm, spindle vertical stroke 80 mm, engine power 3 HP more

New in: used
Price: request quote
Location: Rottenburg
Seller: Ostertag-Plastic

Ausdrehmaschine.auf the machine were rotated out hubs, Maaschine comes from an Automobilhersteller.Durchn store longer which is machine zwischzeitlich rusty and dusty. more

New in: 2007
Price: request quote
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Veneer press, platen press, plate sizing press, gluing press, gluing unit, adhesive melter, gluing machine, hot glueing machine, industrial hot glue gun -2x robot movable on portal travel approx 12 m -1x loading robot KUKA type KR500-2 with multi-function gripper -1x adhesive robot KUKA type KR150-L130 with application head ICO Ak 87 1 PFU40 -2x barrel melting equipment manufacturer ICO type ICO FS 20 -Portal plate press volcano -Plate dimensions 4600 x 1300 mm -Max. Opening width mm -4x hydraulic punch -Plant is complete with security enclosure -Systems Dimensions 14750/6000 / H5300 mm more

New in: 2012
Price: request quote
Location: Land-fr FR mouvaux
Seller: Europ-Equipement

The GEA PowerGrind 280 is a powerful industrial grinder for fresh and frozen goods, which minimizes dust and fines, and manages the meat up to-25 ° C. There is less dust and fines, and not suiffage. The great feeding area minimizes the risk of formation of arch and allows loading the machine with up to 10 standard meat blocks (30 kg) of a sudden The machine comes with a reducer in advance, a screw of new grinding, many grills and knives. more

New in: 2005
Price: request quote
Location: Nord-Italien
Seller: GK Werkzeugmaschinen GmbH

turning diameter:630 mm turning length:2850 mm control:Fanuc 0i-mate MGI swing diameter over slide rest:350 mm bed width:550 mm spindle nose:D11/1:20 spindle bore:104 mm spindle speeds::17-1000 U/min transmission ratio:autom. 4-stufig rapid power traverse in X-and Z direction:4/8 m/min tailstock quill taper MT:5 Morse Quill travel:200 mm diameter of quill:100 mm workpiece accuracy:6-7 ITF x-travel:320 mm z travel:3000 mm chuck size:315 mm dimensions:5200 x 1900 x 1900 mm :6 t power capacity:11 kW CNC controller:FANUC 0i mate TC 3 jaw chuck Ø:315 technical documentation in German language: hydr. tailstock quill movement: steady rest:2 Stück coolant system: : align center: Tools: live cente ... more

New in: 1965
Price: 400 €
Location: D - Thüringen
Seller: Fa. Uwe Schlammer Handels- und Vermittlungsagentur

Wheels: 400 x 50 mm Speed: 2.146 / 2.878 U/min Connection: 4 kW Support surfaces: Equipment: dust nozzle condition: good Weight: 0.34 t Dimensions: 1000 x 750 x 1200 mm more

New in: new
Price: request quote
Location: Italien
Seller: GK Werkzeugmaschinen GmbH

:Omicron 600 R | Omicron 1000 R grinding diameter:315 mm grinding length:600|1000 mm centre height:160 mm swing over bed:315 mm max. workpiece weight:120 kg grinding headstock: xx grinding wheel size:450x127xmin.20-max.50 mm peripheral speed:33 m/sec grinding spindle speed:600-1600 1/min grinding head swivellable +/-:±180 ° infeed each handwheel rotation/division line:2 (0,05)/0,01 (0,002) mm automatic feeds:0,01/0,02/0,03/0,04 mm/min workhead: xx workhead - spindle speed:0-600 1/min swiveling workpiece drive:±90 ° workhead - center taper:4 MK tailstock: xx tailstock quill adjustment:25 mm tailstock quill diameter:43 mm taper in tailstock:4 MK table: xx table speeds:0-5000 mm/min swivell ... more

New in: 1983
Price: 450 €
Location: D - Thüringen
Seller: Fa. Uwe Schlammer Handels- und Vermittlungsagentur

Wheels: 400 x 50 mm Speed: 2.146 / 2.878 U/min Connection: 4 kW Support surfaces: Equipment: dust nozzle condition: good Weight: 0.23 t Dimensions: 1000 x 750 x 1200 mm more

New in: new
Price: request quote
Location: Taiwan
Seller: GK Werkzeugmaschinen GmbH

:FSM 2550|FSM 3060|FSM 4080 grinding length:500 | 600 | 800 mm grinding width:250 | 300 | 400 mm Distance table/spindle center:500 (Option 600) | 500 (Option 600) | 550 (Option 650) mm table-size:250x500 | 300x600 | 400x800 mm max. table load:250 | 300 | 400 kg table speed -stepless-:5-25 m/min rapid traverse cross:900 mm/min cross feed:0,1-20 mm cross feed on handwheel:5 mm/U vertical feed on handwheel:5 mm/U autom. vertical feed:0,005 | 0,01 | 0,01 mm vertical rapid traverse:450 mm/min vertical infeed, min.:0,001 mm dimensions of grinding wheel:200x20x31,75 | 355x38x127 | 406x50x127 mm spindle speed:2900 | 1450 | 1450 1/min spindle drive:1,5 | 3,7 | 3,7 kW hydraulic motor:0,75 | 0,75 | 1,5 ... more

New in: used
Price: 2.000 €
Location: Basel
Seller: Firma Gomez

Industrial furnace Borel, control during the 3-4 year more

New in: 2011
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: MB Busch , Type: RB 300-80/SR -Holz, Year: 2011, Control: Programm, Monting of the machine: 1 X Schleifbürsten<CRLF>1 X Profilschleifköpfe, Number of units: 4, Working widht mm: 300, Through running hight max mm: 200, Diameter of brushes: Bürstenband, Number of rotations controlled: yes, Units mounted upright: 1, Units mounted inclined: 1, Through running hight max mm: 200, Polishing width mm: 300, Axle-diameter: 30, Hight of polishing axle: 50, Vacuum belt: no, Feeding speed continous adjustable: yes, Dust removal brush: yes, Exhaust diameter mm: 300, Weight approx. kg: 2000, Required space L x W x H mm: ca.4500, Type of use: Rohholzschliff, FREE TEXT: Maschine wird v ... more

New in: 2004
Price: request quote
Location: Land-uk UK
Seller: CNC Management Ltd

Make: Nederman Model: Nederman Filterbox Year: 2004 Condition: Used Machine type: Other Location of machine: United Kingdom Ancillaries: 3 phase plug included Ducting included Service details: Part History Is the equipment viewable under power? Yes Condition info: Full working condition. Machine Details Nederman self cleaning Filterbox dust and fume extractor. 2004 stored unused for the last 10 years in our workshop. Full working condition. 3 phase plug included Ducting included more

New in: new
Price: request quote
Location: Standort
Seller: GK Werkzeugmaschinen GmbH

:HBM-130 | HBM-130L | HBM-130XL spindle diameter:130|130|130 mm x-travel:1600|2000|2000 mm y-travel:1400|1800|1800 mm z-travel:2000 mm U-axis:250 mm W-axis (spindle longitudinal):900 mm max. torque on the spindle:3200 Nm B-axis (table):360x1 ° rapid speed:X/Y/Z/W: 2500 mm/min table load:8|10|10 t table-size:1600 x 1400|1800 x 1600|2200 x 2000 mm T-slots:9/11/12 Stk. T-slot - width:28 mm transmission ratio:4 Stk. spindle speed:4-800 1/min spindle taper:50 ISO faceplate:Drehmoment: 4900 Nm faceplate:2.5-125 1/min faceplate:Umdrehung stufenlos einstellbar faceplate:Ø:750 mm weight of the machine ca.:22,5|24,5|25,5 t main drive:22 kW Machine size (LxWxH):6995/3647/342|7030/4665/3800|7030/4665/ ... more

New in: 1990
Price: request quote
Location: Bavaria
Seller: THAL BAUSATZHALLEN

Rigid steel building erected in 1990, now up for deconstruction. Possible future use: Office Building with two levels, Commercial-/ Industrial Hall, Warehouse, Retail Hall, Workshop and many other uses. STRUCTURAL STEEL WORK: The steel structure consists of six clear span steel frames made of hot rolled, primed/ coated euro profiles IPE 450 and two end wall frames with intermediary columns made of hot-rolled steel profiles. The supporting structure of the suspended mezzanine floor consists of euro steel beams HEB 500. The longitudinal stiffness of the Hall is achieved by horizontal bracings in the roof level and vertical bracings in the side walls. The roof substructure consists of tra ... more

New in: new
Price: request quote
Location: Taiwan
Seller: GK Werkzeugmaschinen GmbH

:FS-C 80150/100150AHD | FS-C 80200/100200AHD | FS-C 800300/100300AHD | FS-C 800400/100400AHD grinding length:1500 | 2000 | 3000 | 4000 mm grinding width:800/1000 mm distance spindle nose and table:800 [Option: 1000] | 800 [Option: 1000] | 800 [Option: 1000] | 700 [Option: 900] mm max. table load:800x1500 (2000kg)/1000x1500 (2400kg) | 800x2000 (2650kg)/1000x2000 (3200kg) | 800x3000 (3950kg)/1000x3000 (4800kg) | 800x4000 (5000kg)/1000x4000 (5500kg) kg table-size:800/1000x1500|800/1000x2000 | 800/1000x3000 | 800/1000x4000 mm table speeds:3?25 m/min table guideways:V- und Flachführung automatic cross feed adjustable:0.5?20 mm/Hub rapid traverse cross:900 mm/min cross feed on handwheel:5 (Umdreh ... more

New in: 1990
Price: request quote
Location: Bavaria
Seller: THAL BAUSATZHALLEN

Prefabricated steel Hall erected in 1990 now up for deconstruction. Possible use: Industrial building, Warehouse, Retail/ Sales Hall, Workshop and many others. STRUCTURAL STEEL WORK: The clear span portal frames consists of hot rolled primed/ coated euro profiles IPE 450. The substructure of the mezzanine floor consists of steel beams HEB 500. The longitudinal stiffness of the structure is achieved by bracings in the roof level and in the side walls. The roof substructure consists of trapezoidal sheet steel. FOUNDATION: on point - / Strip reinforced concrete foundations. APPROXIMATE DIMENSIONS: Covered surface area: approx. 784 m²; Hall length: approx. 49.00 meters outside wal ... more

New in: used
Price: request quote
Location: Kleinostheim
Seller: FLECKENSTEIN Werkzeugmaschinen GmbH

x-travel:2600 mm y-travel:900 mm z-travel:850 mm control:HEIDENHAIN ITNC 530 Number of axles:5 St. tool taper :SK 50 tool places:60 Tool changer:60-fold max. Speed:9.000 min-1 integrated NC-rotary table:diam. 1.500 mm max. feed range X, Y - axis:1-9.999 mm/min max. rapid feed X,Y-axis:40 m/min max. feed range Z-axis:30 m/min max. feed force X-, Y-, Z-axis:9.000 N milling spindle dia. in forward position:100 mm Equipment, accessories: 5-axis machining centre with X-, Y-, Z-, B- and C-axis AXA rotary table RTA 5S ? Ø 1.500 mm, 0,001° positionable CNC-control HEIDENHAIN iTNC 530 Electronical hand wheel Touch probe RENISHAW Milling spindle SK 50, 56 kW, 9.000 min-1 1-axis swiveling milling hea ... more

New in: used
Price: 924 €
Location: Weilheim Teck
Seller: A-Z Maschinenwelt

Description: You offer Kaltenbach, which is known for excellent quality of your noble brand here on a super functional under floor saw. It is in good condition. There are small traces of use. This machine provides you with a precise and powerful processing. It is very easy to handle and to use. It is sturdy and very stable. Also very difficult. No comparison to traditional hardware store machines at all. This is a high quality industrial machine. Technical data: Brand: Kaltenbach Type: TL 400 Saw blade diameter: 400 mm Bevel cutting possible. Under floor saw weight 280 kg more

New in: 2012
Price: request quote
Location: Land-de DE
Seller: Kiesel Worldwide Machinery GmbH
New in: 1994
Price: request quote
Location: Land-DE Germany, 40885 Ratingen
Seller: MSI Elmar Reith

Profile Machining Center Edit area x = 6400 mm y = horizontally 300 mm - y = 600 mm - vertical z = 200 mm --------------------------- Process areas x = 6900 mm y = 850 mm z = 480 mm --------------------------- Positioning speeds x = 40 m / min (Portal) x = 20 m / min (clamping units) y = 40 m / min z = 20 m / min --------------------------- Max tool diameter 120 mm -9-speed linear tool changer, driving with -8 pneumatic CNC controlled workpiece clamping units -Infinitely variable speed control up to 24,000 1/min -High-performance 9 KW high speed unit -Integrated tool failover -Milling unit on faster vector axis with Swivel range-95 ° / + 95 ° -Tool holder ISO 3 ... more

New in: 2012
Price: request quote
Location: Land-de DE
Seller: Kiesel Worldwide Machinery GmbH
New in: 2002
Price: request quote
Location: Land-DE Germany, 74243 Langenbrettach
Seller: imc solutions GmbH

TECHNICAL DATA: Work area: 4,000 x 2,000 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Maximum sheet thickness mild steel: 20 mm Maximum sheet thickness stainless steel: 15 mm Maximum sheet thickness ALU: 10 mm NEW RESONATOR IN 2013! STANDARD EQUIPMENT: -Closed machine frame with integrated laser system - laser unit: CO2 laser, high-frequency excited, reflecting telescope, cooling unit - automatic pallet changer and longitudinal conveyor belt - drives: maintenance-free three-phase servomotors automatic Focus position adjustment of AutoLas plus - HI-LAS high pressure cutting - Plasmasensorik PMS - fast processing with SprintLas - ContourLas for making sma ... more

New in: 2015
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Cefla Durchlauflackieranlage, Year: 2015, Control: Cefla, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 3 - 80, Working hight mm: ca 980, Spraying line: yes, work piece cleaning: yes, work piece detection: yes, Conveyour system: band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer circles: 3, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, by rollers: yes, Sanding machines (number): 1, Brushing machine: 1, Design sanding machine no 1: Costa mit Tellerbürsten und Längschleifaggrgat, Dust exhaust (number): 1, 2 UV lamps qty.: yes, IR dryers (number): yes,  ... more

New in: 1999
Price: 16.000 €
Location: AG
Seller: ARTE FERRUM

DECKEL MAHO DMU 50 m 5 axis cnc milling machine The DECKEL MAHO DMU 50 m 5-axis cnc milling machine is a small-scale 5-axis milling machine; the strokes X 500, Y 400, with 400 mm, year of construction 1999, CE standards, with CNC HEIDENHAIN TNC 310 m, iso 40 spindle with 4.500 revolutions and optical lines. It has 3 axes controlled and interpolated to CNC while the 2 rotary axis of the table are manually operated by means of special mechanical handwheels and the relative dimensions are shown on the control display; reconditioned exercise machine. The DECKEL DMU 50 m 5-axis cnc milling machine is a CNC machine particularly suitable for general machining of medium/small dimensions, su ... more

New in: 2012
Price: request quote
Location: Land-de DE
Seller: Kiesel Worldwide Machinery GmbH
New in: 2003
Price: request quote
Location: Margaretenhütte 57, 35398 Gießen, DE
Seller: Weigel – Consulting

used from installation disassembly: 1 x ABB IRB 6400R/2.5 150 industrial robots, robot / welding robots Year of construction: 2003 Load: 150 kg Range: approx. 2500 mm including base Lxwxh: CA. 1400 x 1400 x 200 mm Transport dimensions Lxwxh: CA. 1600 x 1600 x 2000 mm Weight: including base approx. 2500 kg are sold without control so as shown Price is plus VAT free loaded bearing casting Changes / errors in the specifications and subject to prior sale more

New in: 1984
Price: request quote
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

sheet width:6000 mm plate thickness:1 mm distance between columns: mm total power requirement:3 kW weight of the machine ca.:1750 t dimensions of the machine ca.:6.900 x 1.350 x 1.400 mm bending length: 6.000 mm bending power: 1,00 mm motor: 3 kW stroke of top clamping bar: 170 mm max. depth: 1.000 mm number of arms: 4 number of stands: 4 length: 6.900 mm width: 1.350 mm heigth: 1.400 mm weight: 1.750 kg incl. manual cutting unit 2 bending cylinders no users manual The machine was updated 2016 with a new SIEMENS control for multiple angle memory and 2 foot pedals instead of the 2 hand levers. Complys with the current industrial safety regulations (AMVO and UVV) more

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: