du used for sale

This Dugard Eagle 200 was manufactured in 2005. A robust horizontal turning machine featuring a maximum turning diameter of 280 mm and length of 508 mm. It includes a main spindle bore of ø62 mm and a bar capacity of ø52 mm. The spindle operates at speeds up to 4500 rpm, supported by a FANUC motor. A large set of accessories and equipment is included. Contact us for more information about this machine.

Bezel, setting stick, lynette -Max. passage: Ø 320 mm -Peak height: 315 mm -Technical drawing: see photos -Dimensions: 100/420/H600 mm -Weight: 33.7 kg

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Donaldson, Air filter type Duralife SMP 18-1046 Ovp -Number: 8 air filters included -Price: per piece -Dimensions: Ø 282 x 420 mm -Weight: 2.9 kg/pc.

DECKEL MAHO DMU 160P duoBLOCK CNC Machining Center TECHNICAL FEATURES: Year: 2008 CNC Type: HEIDENHAIN TNC 530 Number of continuous axes: 5 X-axis stroke: 1600 [mm] Y-axis travel: 1250 [mm] Z-axis travel: 1000 [mm] X, Y and Z axis travel speed: 15000 [mm/min] Fast travel speed X, Y and Z: 60000 [mm/min] Table dimensions: Ø1500 x 1250 [mm] Maximum weight Tabletop Allowable: 4000 [Kg] Pin attachment: SK 40 (DIN 69871) Minimum speed. Spindle: 20 [rpm] Maximum speed Spindle: 12000 [rpm] Number of tool magazine stations: 60 Machine weight: 35000 [Kg] EQUIPMENT INCLUDED: x1 HEIDENHAIN workpiece probe x1 Laser Gauge x3 HEIDENHAIN measuring rulers on the X, Y and Z axes x1 Watering Center Spindle x1 Chip Conveyor x1 Paper Filtration Unit More information on request.

This Dugard 1000Y Plus was manufactured in 2011. It features a table size of 1200 × 600 mm, a maximum table load of 600 kg, and a tool magazine capacity of 24 tools. The machine includes a fourth rotary axis and is equipped with a FANUC 0i-MD control. If you are looking to get high quality milling capabilities consider the Dugard 1000Y Plus machine we have for sale. A large set of accessories and equipment is included. Contact us for more information.

Vertical Machining Cenre DUGARD EAGLE 1500

DURMA VS 3006 hydraulic guillotine shears were built in 2021 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine is designed for precision cutting of sheet metal with a maximum length of 3100 mm and a thickness of 6 mm. The machining is performed by means of high quality cutting knives, distinguished by their high wear resistance. Automatic adjustment of the knife angle and the gap between the blades enables adjustment of the cutting parameters to the type and thickness of the material. Positioning of the sheet metal is facilitated by a work table with integrated balls, on which it goes directly under the cutting line. Along the cutting line, there are hydraulic hold-downs, which stabilise the material during machining and prevent it from moving. The DURMA VS 3006 is operated from an advanced control system with an intuitive interface and access to many necessary func ...

Key data: 200 t

Press brake – 200 T – Open width 1,600 mm For sale is a hydraulic press brake from the manufacturer DURENDUS with a maximum press force of 200 t. The machine has an open width of 1,600 mm, a maximum installation height of 1,200 mm and a stroke of 1,000 mm, making it suitable for bending, forming and straightening work in industrial use. Technical data + information: Press brake – 200 T – Open width 1,600 mm General information - Reference ID: ME-2026-A-180_DE-2026-ME-215-01 - Type: 2-column frame press - Manufacturer: DURENDUS - Press force: 200 T (adjustable) - Open width: 1,600 mm - Open height: 1,200 mm - Usable area ram: 1,500 mm - Table height from the floor: 850 mm - Overall dimensions (W × D × H): approx. 1,300 × 2,700 × 3,900 mm - Total weight: approx. 5,300 kg Hydraulic cylinders - Stroke: 0–1,000 mm - Working pressure: 270 bar - Cylin ...

DURMA VS 3013 hydraulic guillotine shears were built in 2021 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine is designed for precision cutting of sheet metal with a maximum length of 3100 mm and a thickness of 13 mm. The machining is performed by means of high quality cutting knives, which are characterised by high wear resistance and ensure accurate and repeatable cutting even during intensive operation. Automatic adjustment of the knife angle and the gap between the blades enables precise adjustment of the cutting parameters to the type and thickness of the material. The VS 3013 guillotine shears have a work table with integrated balls to facilitate material positioning. Along the cutting line there are hydraulic hold-downs which stabilise the workpiece during machining and prevent it from moving. The operator has at his disposal an advanced control system with  ...

This 5-axis DMG MORI DMC 100U duoBlock was manufactured in 2012. It features a pallet clamping surface of 1000 × 800 mm, rapid traverse rates up to 60 m/min, and a high-speed spindle at 18,000 rpm. The machine includes a 60-position tool changer and a 980-litre coolant system. Accessories like a chip conveyor, oil mist collector, and BLUM laser tool measurement enhance its functionality. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 100U duoBlock machine we have for sale. Contact us for more information.

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS X with HEIDENHAIN TNC7 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 780 rpm integrated balancing sensor Pallet changer for 2 palletsType of Measuring system Direct measuring systemTable surface Ø 800 x 630 mmCentre bore 50 mmMaximum load (table centre) 1400 Kg4. Axes (swivelling range) 360 x 0,00 ...

This 4-axis DECKEL MAHO DMC 70H duoBlock was manufactured in 2008. A robust horizontal machining centre, it offers advanced capabilities for complex machining tasks. Consider the opportunity to buy this DECKEL MAHO DMC 70H duoBlock horizontal machining centre. Contact us for more information.

General SKU231U202 MakeEmde Nassau TypeBE 1600 No.5557-1 Year of construction2000 Main Features MaterialMild steel Motor0.35 KW Inlet diameter240 mm Specified Features - Bag dump station Inletdia. 240 mm Outletdia. 200 mm Without motorcheck With vibro motor0,35 kW 220-230/380-400 Volt Bag dump stations MaterialMild steel General Mounted on framecheck LocationBarneveld Floorspace1,2x1,2 m Total height1,9 m CEcheckPaints & coatingsPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesBag dump stationsDetergent & surf.Other pharmaceuticsFood additivesSugarAnimal feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicEmde NassauIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Food & F ...

This Durma AD-S 30135 press brake was manufactured in 2006. It features a ModEva 10S control unit and has accumulated 39,801 working hours. With a bending length of 3050mm and a tonnage capacity of 135t, its designed for robust performance. Consider the opportunity to buy this Durma AD-S 30135 press brake. Contact us for more information.

General SKU427X1329 LocationBarneveld CEcheck MakeFlowserve Pressure Working pressure25 Bar Main Features MaterialHastelloy Volume30000 Ltr. Motor2.2 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity± 10-30 m³/h With motor2,2 kW (400 V, 2877 rpm (Ex)) InletDN32 OutletDN50 Centrifugal Pumps MaterialStainless steel 2.4819 (Hastelloy C-276) General TypeMARK 3 ISO Mach.No.ES1824032-01 Year of construction2020 Mounted on framecheck Floorspace0,9 x 0,4 m Total height0,5 m Weight120 kg ATEX designedcheckOils & fatPaints & coatingsCentrifugal PumpsFine chemicalsOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDetergent & surf.CosmeticsLubricants & oleoDairyBeveragesDyes & pigmentsAPIMinerals & inorganicFlowserveIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsPumps >  ...

Mobile filter system air purifier Dustco ProDuster Professional, mobile industrial and laboratory air purifier of the manufacturer Dustco Benelux. Model: Produster. Model no.: CS5060 / 230. Type nr. CSN50360. 230V – 1100 W – 50-60 Hz. 5036012120005. Equipment & Features: Filter equipment: 4 large-area filter elements Filter dimensions (per piece): 610 x 610 x 20 mm No.: C44505001. EAN code 8718182365269. Mobile chassis: Robust aluminium system profile frame. Integrated socket for connecting additional tools. Internal NR 655-1 Areas of application & details: The system is ideal for the highly efficient extraction and filtration of fine dust, grinding dust, paint mist, allergens or aerosols in workshops, laboratories or on construction sites.Thanks to the cubic design with four large filter surfaces connected in parallel, the system offers an extremely high air  ...

This Durma HD-TC60170 was manufactured in 2019. It features a 3kW IPG Fiber laser source, capable of 2.5D cutting, and handles up to 170mm pipes and 120x120cm tubes. It includes an exhaust system, spatter guard, bundle loader for serial work, and a chain loader for smaller jobs. The machine has a 6.5 meter inlet and a 4.5 meter outlet, extendable to 6 meters. Contact us for more information about this machine.

General SKU410X1241 LocationBarneveld CEcheck MakeAzo Main Features MaterialStainless steel Motor0.15 KW Inlet diameter800 mm Specified Features - Bag dump station Hopper sizesø 800x600 mm Inlet800x500 mm Outletø 600 mm With vibro motor0,15 kW (400 V, 2650 rpm) Bag dump stations MaterialStainless steel 1.4301 (304), Stainless steel 1.4541 (321) General TypeET 800 H VR No.1394703-01 Year of construction2018 Floorspace1,20x1,00 m Total height1,20 m Weight350 kg Extra SpecificationsBagdump station, volume 200 l., with vibro sieve, 2x sieve deck, nylon,&:nbsp: perforation 0,3x0,3 mm and 0,5x0,5 mm&:nbsp:Paints & coatingsPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesBag dump stationsDetergent & surf.Other pharmaceuticsFood additivesSugarAnimal feedSolid pharmaceuticsDy ...

Stitch type: double lockstitch, number of needles: 2, max. stitch length: 12mm, sewing speed: 2500stitches/min, presser foot lift height: 9mm, clearance A/B: 10mm/20mm, needle spacing range: 3mm-30mm, needle system: 134-35. Machine dimensions X/Y/Z: approx. 1100mm/600mm/1700mm, weight: approx. 75kg. On-site inspection is possible.

General SKU242U269 LocationBarneveld CEcheck MakeEmde Main Features MaterialStainless steel Volume190 Ltr. Motor3 KW Specified Features - Ribbon blender Ribbon blendercheck Capacitymax. 190 Ltr. Inletdumping cabinet: 850x450 mm Outlet315x230 mm Motor3 kW 220-240/380-415 Volt Speed mixing shaft26 rpm MaterialStainless steel General TypeESM80/ST100 No.A108 0905-11/A108- 0905-12 Floor space2,1x1,2 m Total height1,6 m Weight700 kg Extra Specificationswith lump breaker: motor 4 kW 220/380: speed: 1400 rpmPowdered foodsGeneric medicinesTea, herbs & coffeeStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersRibbon blendersCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicEmde NassauIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Food & Feed > Te ...

Paper drill Dürselen Corta PB 04 N; very good condition; cleaned and tested; 4 drill heads; Drilling lubrication and cooling; Speed regulation; speed table stroke adjustable; max. Stacking height 50mm; insertion depth behind drill 42mm; Sliding table; Hole spacing 31.7-293mm; Endless drilling belt. Paper driller Dürselen Corta PB 04 N; good condition; cleaned and checked; 4 heads; lubrication and cooling system; adjustable drilling speed; adjustable table hub speed; max.pile hight 50mm; depht behind the driller 42mm; slide table; distance between the holes 31,7-293mm; Endless Drill Band.

General SKU396U1158 LocationBarneveld CEcheck MakeAZO Main Features MaterialStainless steel Motor0.15 KW Inlet diameter800 mm Specified Features - Bag dump station Capacity200 Ltr. InletDia. 800 mm OutletDia. 200 mm With vibro motor0,15 kW Bag dump stations MaterialStainless steel 1.4301 (304) General TypeET200P D800 A23R No.129920 Year of construction2012 Mounted on framecheck Mounted on wheelscheck Floorspace1,10 x 1,05 m Total height1,80 m Weight360 kgPaints & coatingsPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesBag dump stationsDetergent & surf.Other pharmaceuticsFood additivesSugarAnimal feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicAZOIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > G ...

2 DC 8/32 towers, each with 8 stations, suction feeder, DBM 120 stapling and folding unit, DBM 120T trimmer, stacker System 5000

Press brake manufactured in 2003. This Durma HAP 40200 features a press force of 200 tons and a bending length of 4050 mm. It operates at a stroke rate of 6 strokes per minute, with a stroke length of 185 mm. If you are looking to get high-quality bending capabilities, consider the Durma HAP 40200 machine we have for sale. Contact us for further details.

Dowel vending machine Koch with a very good condition Incl. window tools IV 68- IV 72- IV-86 as good as new 13,000 EURO Furniture processing is possible: minimum size 30 mm The system is available for immediate delivery PS.: Technical data on request!

General SKU263S271 MakeThaletec (D) TypeDN 300x4200 No.1934 / 6 2 9893 Year of construction2009 LocationBarneveld Pressure Working pressure6 Bar Specified Features - Distillation Capacity305 ltr. Max. temperature-25/200 degr. C MaterialGlass - Enamel General Floorspace0,8x0,7 M Total height4,4 M Weight550 KgOils & fatFine chemicalsOther chemicalSolventsDistillationDetergent & surf.Other pharmaceuticsLubricants & oleoBeveragesAPIDüker GmbH & Co KGaAIndustries > Food & Feed > Oils & fatIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > SolventsColumns > DistillationIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > Lubricants & oleoIndustries > Food & Feed > BeveragesIndustries > Chemical > APIBrand > Düker GmbH & Co KGaA What you can expect from Foeth: -- Mach ...

Technical data of the Boer stove: Oven condition: Excellent Total width of furnace: approx. 2,030 mm Net belt width approx. 1,240 mm Baking chamber height: 180 mm Transfer table bar mesh belt: 640 mm long, protrudes approx. 210 mm into the furnace and borders the net belt Total length furnace approx. 21,880 mm Total length of inlet oven 1,210 mm, of which net belt 1,030 mm Total length of outlet oven approx. 2,380 mm, of which net strap 2,380 mm Outlet height of net belt oven 865 mm Height of furnace without burner chamber approx. 1,850 mm Height of burner chamber without furnace approx. 800 mm Burner Weishaupt Type G1/1-E Transfer of spreader belt TB412GG-TB504 : belt length approx. 1,000 mm Belt width approx. 1,000 mm Strap length: approx. 840 mm Spreading belt TB413GG-TB505: width infeed approx. 1,380 mm Spout width approx. 1,710 mm Strap length: approx. 1,730 mm Convey ...

This 3-axis MIKRON VCP 800W Duro was manufactured in 2004. It features a Heidenhain iTNC 530 control system, with X, Y, Z travels of 800 mm, 650 mm, and 500 mm respectively. The machine includes a high-velocity spindle capable of 20,000 rpm and a 30-position tool magazine. Ideal for precision machining, consider the opportunity to buy this MIKRON VCP 800W Duro vertical machining centre. Contact us for more information about this machine.

General SKU263S270 MakeDüker GmbH &: Co KGaA TypeThaletec DN300x3600 No.1932 / 6 2 9892 Year of construction2009 LocationBarneveld Pressure Working pressure6 Bar Specified Features - Distillation Capacity260 Ltr. MaterialGlass - Enamel General Floorspace0,7x0,6 M Total height3,8 M Weight500 KgOils & fatFine chemicalsOther chemicalSolventsDistillationDetergent & surf.Other pharmaceuticsLubricants & oleoBeveragesAPIDüker GmbH & Co KGaAIndustries > Food & Feed > Oils & fatIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > SolventsColumns > DistillationIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > Lubricants & oleoIndustries > Food & Feed > BeveragesIndustries > Chemical > APIBrand > Düker GmbH & Co KGaA What you can expect from Foeth: -- Machine is in worki ...

This 3-axis Dugard 850VMC was manufactured in 2007. It features a maximum spindle speed of 8,000 rpm and an impressive X/Y/Z travel of 850 x 520 x 510 mm. The machine includes a robust table size of 1000 x 510 mm. If you are looking to get high-quality machining capabilities, consider the Dugard 850VMC vertical machining centre we have for sale. Contact us for further details.

Intermittent horizontal cartoner Kalix Dupuy, Elec: 16 A , A (mm): 20 to 70 , B (mm): 15 to 60, C (mm): 70 to 200

A Heidelberg imagesetter for prepress is available. Laser wavelength: 680nm, laser class: 1, max. positive format: 505mm/535mm, max. negative format: 505mm/545mm, scan line length: 505mm, max. screen frequency: 200lpi, repeatability: +/-5µm, max. output speed: approx. 1320mm/h, materials: RC paper/film/polyester printing plates, max. material thickness: 0.2mm. Machine dimensions X/Y/Z: approx. 1200mm/750mm/1100mm, weight: approx. 250kg. An on-site inspection is possible.

Gas line, unused, 6 units

This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information.

DUMOULIN dosing turbine, for small batches or for development., 2 tanks sold with the machine: 15 and 30kg, System NEP, Waterproof? No, wait - The input is Pompe perilstatic Waston Marlow which appears to be a product name. Likely translation: Perilstatic pump Waston Marlow., Sold without its power cabinets, fan, and filtration system

This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine.

1 x ZEISS-Stiefelmayer Duplex Measuring System Bauj. 11/1995 1 x Stiefelmayer Duplex Measuring System Bauj. 1985 1 x Stiefelmayer measuring system built in 1987 1 x Stiefelmayer measuring system built in 1987

This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine.

Lathe Böhringer DUC 560 BJ 1995

Diecutter for paper/enveloppes, Make Winckler & Dünnebier, Model 830E, Year 1962, Size of the table 100 x 105 cm, space under the table 18-19 cm, stroke 5-6 cm, Available direct, Size of the table: 100 x 105 cm, Space under the table: 18-19 cm, Stroke: 5-6 cm

This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine.

Key data: 100 t

For sale is a hydraulic single-column press (C-frame) from the manufacturer Durendus with an adjustable press force of up to 100 T. The machine has a table size of 800 × 600 mm, a maximum installation height of 700 mm and an adjustable stroke of up to 500 mm, making it suitable for a wide range of pressing, assembly and forming work in industry and production. The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. Here are the technical data of the offered machine: Technical data + information: Hydraulic Single Post Press – C-Frame – 100 T Allgemeine Disclosures - Title: Hydraulic Single Column Press - Type: C-frame / single-column press - Manufacturer: DURENDUS - Press force: 15–100 T (adjustable) - Max. installation heigh ...