We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,107 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Stock # U2352-4 Used stainless steel lab size mobile fluid bed dryer by Glatt model GPCG-1. Working volume of drying chamber up to 4.5 l. Operating pressure 0.79 bar. Machine is equipped with two stainless steel cones - one for coating process, second for drying. Coating cone is also equipped with 4 stainless steel screens. Nozzle not included. Electric power supply for heating 4 kW. Working temperature range from 10 up to 140 C. Dryer is equipped with centrifugal fan driven by el. motor 2.2 kW, 2850 rpm, 220-230/380-400 V, 50 hz. Compressed air - pressure 6 bar.
used
USED STAINLESS STEEL SPROUT-WALDRON 10 DRYER REF.: C6846 General characteristics: Manufactured by SPROUT-WALDRON Model 10 Material Stainless steel Weight 510 kg Motor characteristics: Rotational speed 910 rpm
used
used
inlet wire diameter 6,5 mm finished wire diamter 1,6 mm number of drafts 8 diameter of capstan 550 mm and 650 mm speed -meters/sek 8-12
used
Used lab spray dryer Buchi B-290 Power consumption: max. 2900 W Connection voltage: 200 – 230 V ± 10 % Frequency: 50/60 Hz Environmental conditions: for indoor use only Temperature: 5 – 40 °C Altitude: up to 2000 m Humidity: maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C Evaporating capacity: 1.0 l/h H2O, higher for organic solvents Airflow: max. of 35 m3/h Motor control: Frequency converter Max. temperature input: 220 °C Heating capacity: 2300 W Heating control: PT-100, fuzzy logic, control accuracy ± 2 °C Interface: Serial port RS-232 for all parameters Spray gas: Compressed air or nitrogen / 200 – 800 l/h, 5 – 8 bar Nozzle tip diameter: 0.7 mm standard, other sizes 1.4 and 2.0 mm available Possible particle diameter range: 1 – 25 µm Mean residence time: 1.0 – 1.5 sec. Pollution deg ...
used
Air dryer technical data: Working pressure, bar 17 Maximum pressure, bar 22 Operating temperature, ° C 36 Power, kW 5,45 The amount of charge, kg 3,97
used
USED INGERSOLL RAND NON-CYCLING REFRIGERATED AIR DRYER
new
Air dryer suitable for 7,5kW compressors. Designed for use with Aflatek Screw10A and Screw10A-200 compressors. Technical data: Air Flow 1.5 m3 / min Dew Point 2 - 10 °C Inlet/Outlet diameter G-1'' Power 0,6 kW Matched Air Compressor power kW 7,5 Weight 45 kg Inlet temperature 45 °C Presure 0,8 Mpa Cooler R 134 Current 3 A Size 730x420x720 mm -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.
new
Air dryer suitable for 15kW compressor. Designed for use with Aflatek Screw20A compressor. Technical specifications: Air Flow 1.5 m3 / min Dew Point 2 - 10 °C Inlet/Outlet diameter G-1'' Power 0,6 kW Matched Air Compressor power kW 7,5 Weight 45 kg Inlet temperature 45 °C Presure 0,8 Mpa Cooler R 134 Current 3 A Size 730x420x720 mm -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.
used
Refrigerant dryer Kaeser TA 5 YOC 2013 Location: 59425 Unna The article is welcome to be viewed. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and legal entities. Company names and trademarks are the property of their respective owners and are used only to identify and describe the products. The assembly and the electrical connection of the machine / devi ...
used
Vacuum tumbler Rühle MKR220, built in 2009, in a good used and functional condition. Completely made of stainless steel. Drum volume 220 liters, filling capacity up to 145 kg. Can be retrofitted with polterarm, mixing arm. Speed of the polterarm up to 50 rpm infinitely variable. Programmable Rühle control. Dimensions B/D/H 120/95/175 cm. Connected values 400 Volt, 4.3 kW, 12.1 A. Workshop tested, immediately ready for use. More on request.
used
I sell a screw compressor with air dryer: AIRKRONE 25 SS + Dryer ES30. Powerful engine 18.5 KW / 25 HP 174 m3 / h / 2900 l/min Built in 1997. Approximately 20,000 moto hours. Made in Austria Everything works. Available equal, 2 pcs in stock. Possible also separately without air dryer cheaper to buy. Price by appointment.
new
Advantages of Aflatek 3in1 7.5A: -5.5kW electrical motor. -Integrated 150l air tank. -Air and oil filters as well as oil separator already included. -Low noise and vibrations level. -Compact, vertical design. -Integrated air dryer. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, kW: 5.5 Drive type: Direct drive Motor protection: IP 54 Air supply at 8 bars, L/min: 500 Air tank, L: 150 Dimensions(length x width x height), mm: 1400x700x1380 Weight, kg: 310 Shipping details: Packaging: Plywood box on a pallet Dimensions (length x width x height), mm: 1500x800x1500 Weight, kg: 340 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.
used
Refrigeration dryer make KAESER type TA 5Machine -No: 1.7917.0 Machine -No: 05527 Year 1995Volume flow: 0.55 m³ / hPressure loss: 0.05 barMax. Operating pressure: 16 bareffective power consumption: 0.28 kWRefrigerant: R 22Quantity: 0.320 kgOperating pressure: 25/16 barPower connection: 220 V / 50 HzOutside dimensions approx: 490 x 630 x 742 mmWeight approx: 80 kgused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electrically heated tempering furnace make HERAEUS GmbH Hanau type HM 13Machine -No: 28024, wiring diagram no. 1641Max. Nominal oven temperature: 1150 °Internal dimensions W x D x H: 400 x 650 x 250 mmRated power: 20 kWExternal dimensions: 1500 x 1300 x 1700 mmWeight: 940 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electrically heated tempering furnace make HERAEUS type HM 13Machine no .: 21103283 / 2832-01 Year of construction 1980 m. Inert gas annealing muffleMax. Nominal oven temperature: 1150 °Max. Inert gas muffle: 920 °Internal dimensions: 400 x 250 x 650 mmRated power: 20 kWContent of the gas-flushed room: 68 lOutside dimensions: 1385 x 1915 x 1705 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
2 convection ovens make HERAEUS type UT 5050 EKYear of construction 1981Maximum temperature: 300 ° CInside dimensions W x H x D: 435 x 400 x 480 mmVolume: 105 lelec. Connection: 220 V, 2 kWExternal dimensions W x D x H: 800 x 650 x 670 mmWeight approx .: 65 kgsecond handPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric Hardening Furnace Fabr. NOLZEN Type KHR 30/20/50Machine No: 12272 Year 1968Internal dimensions: 300 x 200 x 500 mmMax. Temperature: 1100 °Max. Connected load: 14 kWOutside dimensions: 850 x 950 x 1600 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric hardening furnace Fabr. LEADING type KMO / E 8Machine -No: 301077/89 Year 1989Max. Temperature: 1.200 °Internal dimensions W x H x D: 500 x 315 x 800 mmDrive value: 25.5 kWExternal dimensions L x W x H: 1700 x 1500 x 2100 mmWeight approx: 2000 kgWith- automatic pneumatic doorused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Air conditioner make HERAEUS / VÖTSCH type VEM 03/2240 LFabr. -No: 29515 built in 1988Temperature range from: -30 ° - + 100 ° CDimensions interior W x D x H: 1480 x 780 x 2000 mmHeat compensation + 20 ° C approx.: 1500 W+ 10 ° C: 1300 W+/- 0 ° C: 1100 W-10 ° C: 900 W-20 ° C: 600 WRefrigerant: R 502Refrigerant pressure: 1.6 barpermissible operating pressure: 23 barTemperature deviations: +/- 10 ° CConnected load: 380 V, 5.5 AProtection class: IP 20Weight approx .:510 kgWeight of control cabinet approx .: 310 kgDimensions oven: 2200 x 1000 x 2300 mmDimensions control cabinet: 800 x 600 x 2200 mmWith- Test room made of stainless steel- Pipe penetration 50 mm Drm.- Pipe penetration 80 mm Drm.- Door lockable, 2 leaves, door size 1430 x 2000 mm- Observation window 500 x 1000 mm- Separate electrical and control cabinetvery little used, in very good conditionPrice on request.Delivery: e ...
used
Warming cabinet make HERAEUS type T 6030Best. -No: 51000066 Machine -No: 8903337, built in 1989Max. Temperature: 300 °Internal dimensions: 370 x 352 x 231 mmInterior volume: 30 lHeating time of 25 ° C on300 ° C: 75 min.150 ° C: 30 min.70 ° C: 15 min.Curb weight: 40 kgOutside dimensions approx: 610 x 552 x 552 mmused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Climate cabinet Fabr. TENNEYFabr -No: 577066J197Internal dimensions: 350 x 250 x 200 mmMax. Adjustability cold: - 88 ° CMax. Adjustability heat: + 176 ° CExternal dimensions L x W x H: 950 x 610 x 1700 mmWith- mobile undercarriage- stepless temperature adjustment- Timer- autom. cycle settingused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric Hardening Furnace Fabr. PEDE Type M 3 / SFabr. -No: 1075 Com. -No: 5875 Year 1987Max. Temperature: 1200 °Internal dimensions approx: 280 x 200 x 700 mmOutside dimensions approx: 980 x 1100 x 970 mmElectricity requirement: 13 kWPower connection: 380 V / 50 HzWith- Timerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Zinc melting furnace RAUCH ZSO 450 BMasch. -No: 70112/836597 Year of construction 1997Technical specifications:Max. Temperature: 450 degreeHeating output: 96 kWWeight approx: 1300 kgWith- 1 control cabinet- ZFB conveyor belt including drop chuteusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hardening furnace make NABER type 8 / LFabr. -No: 62604 built in 1984Technical specifications:Max. Temperature: 1260 ° CInternal dimensions approx. W x D x H: 700 x 900 x 1200 mmDrive power: 27 kWWith- Controller C8usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric hardening furnace (muffle furnace) make HERAEUS type MR 260Machine -No: 0218Technical specifications:max.temperature: 1000 °Dimensions approx: 800 x 600 x 1300 mmWith- underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric hardening furnace (muffle furnace) make HERAEUS type MR 260Machine -No: 7106536 built in 1971Technical specifications:max.temperature: 1000 °Dimensions approx: 800 x 600 x 1300 mmWith- underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric annealing furnace make NOLZEN type WL 20/16/30Machine -No: 3517 built in 1971 Technical specifications Max. Temperature 1150 ° Internal dimensions 200 x 160 x 300 mm Electrical consumption 6.0 kW Power connection 380 V / 50 Hz External dimensions approx. 600 x 700 x 1000 mm With - Temperature display / timer used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric annealing furnace make NOLZEN type WS 20/19/45Machine -No: 3191 built in 1972Technical specifications:max.temperature: 650 °Internal dimensions: 200 x 190 x 500 mmElectrical consumption: 3.6 kWPower connection: 380 V / 50 HzExternal dimensions approx .: 600 x 700 x 1200 mmWith- Temperature display / timerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric annealing furnace make NOLZEN type WL 20/19/50Machine -No: 3241Technical specifications:max.temperature: 1150 °Internal dimensions W x H x D: 210 x 190 x 500 mm:Electrical consumption: 9.5 kWPower connection: 380 V / 50 HzExternal dimensions approx. 1050 x 610 x 1630 mmWith- underframe- temperature displayusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Güntner S-GFD 080B/2x8-N(D)
used
Electrode heater make KÜPPERSBUSCH type SET 10Machine -No: 1937 built in 1980Technical specifications:Internal dimensions approx: 230 x 250 x 470 mmControl voltage: 220 VPower: 2.0 kWExternal dimensions approx .: 410 x 370 x 690 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
With warranty 12 months, immediately available - T max 150°C, increase to 250°C possible on request - Inside W 1000 x D 1000 x H 1500 mm - Outside W 1864 x D 1560 x H 2440 mm - Capacity 1500 liters - Inlet rails, for feeding the furnace with a loading rack - JUMO DICONtouch (10 programs with Ethernet interface) - Weekly timer - with exhaust fan 360 m³ / h - Door limit switch - Recirculating air fan, switch-off when the door is open, with time monitoring and fan overrun - Temperature limiter - Horn incl. light - Heating capacity 17.4 KW - Weight: 760 kg - Documentation, CE declaration, e-plan We are happy to offer installation and commissioning. We stock new and used industrial furnaces. Get in touch with us! Viewing in our warehouse by appointment.
new
Spray drying booth L8000mm, W4000mm, H2600mm All applicable standards 28.000m³/h in-blow-out Lacquered temp. 20°C Drying temp. 70°C Direct gas burner 300KW Stun, filter, grid assignment, Lighting.