dry used for sale

Used Calmic Eurovent stainless steel vacuum tray dryer. It has approximately 3 square meters of drying area. Includes (3) individual drying compartments approximately 980mm wide X 1010mm deep X 160mm high. It also includes (6) stainless steel trays approximately 470mm wide X 945mm long X 40mm deep. Material Stainless Steel 316/316L Weight 1155 Kg In your state

Stainless steel nucha filter dryer from the E.BACHILLER brand of 0.4 m2. Year 1987. Hydraulic power plant with 7.5 hp 1410 rpm 50 hz 220 v motor Technical characteristics Year of manufacture 1987 Working body pressure 3 bar Body working temperature 300 ºC Total body volume 680 L Working pressure half-round/liner 3 bar Working temperature of half round/jacket 300 ºC Half-round volume/shirt 28 L Filtration area 0.4 m2 Equipment Setup Hydraulic power plant Transportation Information Length 2100 mm Width 2100 mm Height 2100 mm Weight 500 Kg No documentation In your state

degree: max 1800 working heigth: mm length: mm width: mm depth: mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A 4-level vertical dryer Giardina with a paternoster system for water-based and solvent-based coatings with flash-off, heating and drying zones is available. Workpiece length range: 300mm-3200mm, workpiece width range: 0mm-1350mm, workpiece height range: 0mm-80mm, working height: 950mm, door arrangement: vertical, number of doors: 16, number of trays: 66, levels: 4, accessibility: all sides, number of heating coils: 3. Machine dimensions X/Y/Z: approx. 5350mm/7550mm/6550mm, electrical cabinet dimensions X/Y/Z: 2500mm/500mm/2000mm. Documentation available. An on-site inspection is possible.

racks: 17; support tube spacing: 60mm; rack length: 650mm; langth: 200 - 2000mm; rolls: Polyamid 4 Stück; depth: 870 - 1180mm; height: 198mm; safe load: 400kg; The user-friendly Varioflex drying rack is a space-saving and gentle solution for storing painted workpieces. The four swivel castors mean that it can also be used for transporting workpieces. Its solid tube frame design can be adjusted between 200 mm and 2,000 mm. With 17 inside and outside plastic-coated support tubes on each side, the rack can support up to 400 kg of evenly distributed weight. The plug-in inside and outside support tubes can be taken out and re-inserted as needed. When not in use, the drying rack can be collapsed and takes up minimal space.

Serial Number: 4147 Operating Pressure: 16 bar Operating Voltage: 400 V Frequency: 50 Hz Rated Current: 4.1 A Auction-ID: A7-49089-173

Serial Number: 4072 Operating Pressure: 16 bar Operating Voltage: 400 V Frequency: 50 Hz Rated Current: 4.1 A Auction-ID: A7-49089-172

SEVAL is a type of machinery often used in the packaging industry, particularly for filling sachets with a variety of products. Sachet fillers are designed to efficiently fill small, often single-use packets with goods such as powders, liquids, granules, or even solid items., Key Features of SEVAL Sachet Fillers:, - Versatility: SEVAL sachet fillers can handle different types of products, making them suitable for various industries including food, pharmaceuticals, cosmetics, and chemicals., - Automation: These machines are often semi-automatic or fully automatic, enhancing efficiency and reducing the need for manual labor. They can integrate with other packaging systems for a streamlined process., - Speed and Efficiency: SEVAL fillers are designed to operate at high speeds while maintaining accuracy in filling volumes. This is crucial for high-volume production settings., - Precision: Th ...

Nominal flow rate 4900 l/min Maximum air pressure 14 bar Maximum air inlet temperature 55 °C Ambient temperature 1-45 °C Power supply ph/V/Hz 1/230-240/50 Rated electrical power 790 W/A/3.9 Maximum fuse A 10 USED MATERIAL Auction-ID: A1-48745-32

Manufacturer: SURFIN Year 2020 Condition Used Stock number 9377 Air capacity: 26000 m³/h Internal dimensions of the machine (LxWxH): 6000 x 4000 x 2800 mm Drying up to 60 °C, Electrical connection: 24 kW, Including E1 – air supply and E2 – exhaust air; E3 – Exhaust gas discharge optional by arrangement.

UV drying system, Totalisator operating hours 1484, The system was connected to a Heidelberg GTO 52 with LACO 52-Lackiersystem., No direct connection to the pre-machines/devices is required., It is a used UV lamp ADNOS 04204B4 (current designation ADS 53-160) installed.

Transformer Manufacturer: Schneider Type: HOGB 800A-0921T02001 800KVA 400V 50/60Hz The device is NEW and fully functional. see pictures for more details.

1.0 pcs. dry air dryer Manufacturer: LABOTEK Type: DH380/HEAT Year of Make: 2006 Drying container: 300 litres which corresponds to 204 kg/material Dry air temperature: max. 200° C

NEW PRICE: 3,150.00 EURO Technical data: Volume flow ISO 7183 A1: 0.6 m³/min Pressure dew point: 3°C Pressure loss: 0.07 bar Electrical power consumption at 100% vol.: 0.29 kW Electrical power consumption at 50% vol.: 0.17 kW Overpressure: 3 to 16 bar Ambient temperature: +3 to +43°C Max. compressed air inlet temperature: 55°C Dimensions W x D x H: 630 x 484 x 779 mm Weight: 70 kg Compressed air connection: G 3/4 Condensate drain connection: G 1/4 Power supply: 230 V / 1 / 50 Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mobile heating- and drying oven for temperatures from +20°C up to 300°C. Incl. height-adjustable shelves.

Silenced screw compressor controlled by LCD display and inverter for modulation of engine rpm to reduce consumption, 7.5 kw 10 hp motor - pressure 8 bar, complete with digital dryer and air filters, never used 0 hours Auction-ID: A7-49495-5

DRC screw air compressor, reduced consumption, reduced noise thanks to motor management by inverter managed by digital panel, compressor with pressure 8 bar and power 10 hp, air tank 330 liters NEVER USED Overall dimensions: 2000 x 800 x 1500 mm Weight: 250 kg Auction-ID: A7-49495-45

Silenced screw compressor controlled by LCD display and inverter for modulation of engine rpm to reduce consumption, 7.5 kw 10 hp motor - pressure 8 bar, complete with digital dryer and air filters, never used 0 hours Auction-ID: A7-49495-65

General Description Professional wet and dry industrial vacuum cleaner manufactured by Ghibli , model Nevada MAX . Designed for vacuuming dust, dirt and liquids in workshops, production facilities, construction sites, car washes and professional cleaning applications. Technical Details Manufacturer: Ghibli Model: Nevada MAX Machine type: Wet & dry industrial vacuum cleaner 3 independently switchable vacuum motors Large stainless-steel collection tank Wet and dry vacuuming capability Long suction hose Mobile chassis with wheels Transport handle Heavy-duty industrial construction Condition Used industrial condition. The vacuum cleaner is described as well maintained with normal signs of professional use. Supplied as shown. Operational status and detailed electrical/motor condition have not been independently verified. Auction-ID: A7-49535-20

Ultrafilter Laserpac LP 0072 Compressed Air Treatment Dryer Industrial adsorption dryer and CO₂ cleaner from the premium manufacturer Ultrafilter (Donaldson) This system has been specially developed for applications that require absolutely high-purity compressed air – ideal for the operation of laser cutting systems, the pharmaceutical and food industries or electronics production. The system not only removes moisture in a 5-step process, but also cleans the compressed air extremely efficiently from oil vapors, particles and carbon dioxide (CO₂). Technical data at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Power supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow rate (at 5.5 bar g): Inlet approx. 36.3 m³/h | Discharge min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/environment ...

Dry-cooler BlueBox (Refrion) EK4Y2680.4/2Q 800 KW Cooling capacity: 800 kW (40/35 — +25C) Year of manufacture: 2022 Fluid: Glycol + Water Number of fans: 12 pcs. Fan Diameter: 800 mm Volume: 428 dm³ Dimensions: 8.9 x 2.14 x 2.2 m. Weight: 2915 kg. Condition: Good

Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Drying oven: with isolation transformer -Type: ES 2 -Technical data: unfortunately no longer legible -Usable space: Ø 100 x 430 mm -Transport dimensions: 520/230/H560 mm -Weight: 14 kg

DRC screw air compressor, reduced consumption, reduced noise thanks to motor management by inverter managed by digital panel, compressor with pressure 8 bar and power 10 hp, air tank 330 liters NEVER USED Overall dimensions: 2000 x 800 x 1500 mm Weight: 250 kg Auction-ID: A7-49495-375

Silenced screw compressor controlled by LCD display and inverter for modulation of engine rpm to reduce consumption, 7.5 kw 10 hp motor - pressure 8 bar, complete with digital dryer and air filters, never used 0 hours Auction-ID: A7-49495-215

Beko Everdry FRA- Plus 340 Dryer (2020) Includes 4x Beko Clearpoint Main unit 3752 kg Auction-ID: A1-48805-115

Kärcher BR 55/60 W industrial scrubber drier for professional cleaning of workshops, warehouses, production areas, garages, logistics areas and industrial buildings. This floor cleaning machine combines washing and vacuuming to leave surfaces clean and quickly dry. The reputation of the Kärcher brand and the robust design of the BR series make it a sought-after piece of equipment for industrial maintenance, cleaning companies and technical services. Auction-ID: A1-48554-332

die Steuerung ist vorbereitet für Kompressor-Gleichlaufsteuerung. inkl. · Drucktaupunkt-Steuerung ·Mit einer Drucktaupunkt-Steuerung können Sie den Trockner im starren oder variablen Zyklus betreiben. Im starren Zyklus erfolgt die Umschaltung nach einer festgelegten Zeit (in der Regel nach 5 Minuten). Im variablen Zyklus erfolgt die Umschaltung abhängig vom erreichten Drucktaupunkt und der Beladung des Trockenmittels. Die Adsorptionszeit im variablen Zyklus beträgt maximal 60 Minuten. Neugerät Achtung: Das Gerät wird ohne Vor-, und Nachfilter geliefert. Ein Vorfilter ist dringend erforderlich, falls nicht schon vorhanden.. Siehe Optionen unten. (Bild: Katalogbild) Erforderlich: Vorfilter (lose beigefügt) - Euro 3.600,- + MwSt. Nachfilter (lose beigefügt) - Euro 3.600,- + MwSt.

die Steuerung ist vorbereitet für Kompressor-Gleichlaufsteuerung. inkl. · Drucktaupunkt-Steuerung ·Mit einer Drucktaupunkt-Steuerung können Sie den Trockner im starren oder variablen Zyklus betreiben. Im starren Zyklus erfolgt die Umschaltung nach einer festgelegten Zeit (in der Regel nach 5 Minuten). Im variablen Zyklus erfolgt die Umschaltung abhängig vom erreichten Drucktaupunkt und der Beladung des Trockenmittels. Die Adsorptionszeit im variablen Zyklus beträgt maximal 60 Minuten. Neugerät Achtung: Das Gerät wird ohne Vor-, und Nachfilter geliefert. Ein Vorfilter ist in den meisten Fällen dringend erforderlich. Siehe Optionen unten. (Bild: Katalogbild) Erforderlich: Vorfilter (lose beigefügt) - Euro 3.600,- + MwSt. Nachfilter (lose beigefügt) - Euro 3.600,- + MwSt.

Technical details Manufacturer: DELUX Model: DPSL 3520 CE Type: Grain dryer Configuration: - Industrial continuous-flow drying system - Vacuum Cool technology - High-efficiency grain drying process Capacity: - 8–9 t/h (20% to 15% moisture) - 5–7 t/h (25% to 15% moisture) - Overall capacity: Approx. 5–9 t/h Heating system: - Fuel: Natural gas / LPG / Diesel - Natural gas consumption: Approx. 33.9 m³/h - Burner output: Approx. 521.7 kW - Equivalent thermal power: Approx. 710 HP Application: - Corn drying - Grain drying - Agricultural processing - Grain storage preparation Features: - Vacuum Cool system - Uniform grain drying - Reduced fuel consumption - Low energy consumption - Quiet operation Dimensions: - Length: 3200 mm - Width: 2440 mm - Height: 4900 mm Weight: Approx. 2722 kg Condition: Used Observed condition: - Industrial grain drying syste ...

Serial number: 6600121 Operating voltage: 3 x 380 V Frequency: 50 Hz Connection: 9 kW Rated current: 25 A Reference: Alesco - Lot 103 Auction-ID: A7-49882-66

Serial number: 1451600 Operating voltage: 400 V Frequency: 50 Hz Connection: 5 kW Reference: Alesco - Lot 81 Auction-ID: A7-49882-49

Machine number: 0058005 Operating voltage: 400 V Frequency: 50 Hz Connection: 7 kW Reference: Alesco - Lot 101 Auction-ID: A7-49882-65

Machine number: 2160702 Operating voltage: 400 V Connection: 6.7 kW Frequency: 50 Hz Reference: Alesco - Lot 95 Auction-ID: A7-49882-60

Airflow Process: 2400 kg/h. Allowable air pressure: 300 Pa. Design temperatures 20-44C degrees. 400v/50Hz. Rating power: 25kW. Auction-ID: A1-49552-82

Used laboratory drying oven from Memmert in a compact tabletop design with stainless steel housing. The device has an analogue control unit with rotary control, alarm function (on/off) and a temperature display scale. Heating chambers of this type are used in laboratory, research and industrial environments for drying, sterilising and heat treatment of samples and materials. The device is used and shows normal signs of use due to use, in particular slight soiling and marks on the side surfaces of the stainless steel housing. Scope of delivery: 1 Memmert laboratory drying oven 1 power cord Without additional accessories Device test: DGUV V3 (Apleona), next test date visible Control: Analogue, rotary control Protection class: DIN protection class 2 / 3.1 (according to the safety label) ― Length: approx. 50 cm Width: approx. 35 cm Height: approx. 45 cm Weight: approx. 20 kg Auc ...

Airflow: 0.75 m3/sec or 2700 m3/h. 3 ph. 50 Hz. Operational amperage: 3.2A. Maximum amperage: 4A. With control panel and documentation. Auction-ID: A1-49552-44

Max DN: 125mm. Fluid group 2. Coil temperatures: +110/-40c degrees. Pressure: 9 bar. Tested pressure: 10 bar. Auction-ID: A1-49552-20

Equipped with 2024 Vosair Air Dryer type: CRDP-100, capacity 1666 liters/min. Max working pressure 16 bar. 230V. Auction-ID: A1-49552-88

Mobile granulate dryer unit with ICEVA attachment conveyor; newer version, well-maintained condition. 1N~230 V / 50 Hz; power 2.1 kW (dryer) + 1200 W (ICEVA). Auction-ID: A7-49816-104

- Updated in 2002. - Total installed electrical power approx. 200 KW. - Capacity 10000 kg/h (atro) - Water evaporation 9700 kg/h. - Initial humidity 100% (atro). - Final humidity 3% ±1% (atro). - Gas inlet temperature 520 °C. - Gas outlet temperature 130 °C. - Chip output temperature approx. 60 °C (at ambient temperature 10 °C). - Total thermal energy consumption approx. 8,670,000 kcal/h. - Maximum pressure allowed: 26 mbr. - Includes: • Hot air generator. • Fuel oil burner: maximum consumption 600 kg/h. • Dust burner. • Mixing chamber. • Rotary drum dryer: diameter approx. 4000 mm, length approx. 12000 mm. • 4 cyclones for the separation of dry material from process air. • Fans and pipes. • Support structures with stairs and walkways for inspection and maintenance. - Operating conditions of this machine: unchecked. - EX  ...

Year of construction: 2021. Unused. Complete drying installation with drawings/documentation. Description of installation see documents. Auction-ID: A1-49552-140

Max DN: 125mm. Fluid group 2. Coil temperatures: +110/-40c degrees. Pressure: 9 bar. Tested pressure: 10 bar. Auction-ID: A1-49552-19

Nardi Compressori Extreme 4D 90 Lt. – Dental/Medical Compressor with Dryer (YOC 09/2016) Professional oil-free piston compressor of the Extreme 4D series (Dental/Medical version) from Nardi Compressori, Italy. Serial number 225918, year of construction September 2016.Technical data (according to nameplate): • Model: Extreme 4D 90lt. • Power: 2.5 hp / approx. 1.84 kW • Voltage: 230 V / 50 Hz • Current consumption: 13.5 A • Speed: 1,400 rpm (slow running = quiet & durable) • Suction capacity: 480 L/min • Operating pressure: 8 bar • Tank volume: 90 litres (horizontal) • Sound pressure level: Lpt 77 dB / Lw 91 dBA • With integrated adsorption dryer (typical for the 4D series) → delivers dry, oil-free and clean compressed air • Internal epoxy coated tank (corrosion protection) • Made in Italy The compressor is fully functional and ready for  ...

Paint drying oven from Thermo Scientific with a usable volume of 120 litres and a maximum operating temperature of 250 °C. The unit is designed for drying and curing paints, coatings and synthetic resins in the industrial and laboratory sectors. The cabinet has an exhaust air connection and complies with temperature protection class 2 in accordance with DIN 12880.The unit is used and shows normal signs of use in the interior. The housing is in good condition without significant damage. Scope of delivery: 1 Thermo Scientific LUT 6050 paint drying oven Connection cable Without accessories or installations Type: LUT 6050 Year of construction: 2018 Order no.: 50049643 Factory number: 42383627 Max. temperature: 250 °C Usable volume (steam room): 120 l Power: 3.2 kW Connection: 1N/PE 230 V / 50 Hz / 14.4 A Protection class: IP 22 Temperature protection: DIN 12880, class 2 Exhau ...

- Updated in 2002. - Total installed electrical power approx. 180 KW. - Capacity 8500 kg/h (atro) - Water evaporation 8500 kg/h. - Initial humidity 100% (atro). - Final humidity 3% ±1% (atro). - Gas inlet temperature 550 °C. - Gas outlet temperature 120 °C. - Total thermal energy consumption approx. 7,800,000 kcal/h. - Maximum pressure allowed: 26 mbr. - Includes: • Hot air generator. • Fuel oil burner: maximum consumption 600 kg/h. • Dust burner. • Mixing chamber. • Rotary drum dryer: diameter approx. 3600 mm, length approx. 11000 mm. • 2 cyclones for the separation of dry material from process air. • Fans and pipes. • Support structures with stairs and walkways for inspection and maintenance. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense o ...

Compressed air production set consisting of compressor, dryer and accessories. 1 Atlas Copco GA 7 VSD+ compressor with variable speed drive 1 Atlas Copco FX 30 refrigeration dryer 1 galvanized tank of 500 liters 1 Atlas Copco oil-water separator Auction-ID: A1-49938-5

Atlas Copco MED 15 Air Dryer & Purifier, Model CD 17. Equipment for the treatment and purification of air in medical and surgical compressed air systems, especially in hospitals and clinics. Can also be used for industrial applications, such as paint booths. HOC (Heat of Compression) technology using the heat generated by the air compressor Capacity: Approx. 1,020 L/min (36 CFM) Operating pressure: 7.5 bar Power supply: 230 V Auction-ID: A1-49938-21

Power: 1,78 kW , Max. pressure: 16bar , Co2 equivalent: 3,016t , Coolant: R407C-1,70 KG , Max. ambient temperature: +2/ 45° , 11000L/ min , see photos for more details Auction-ID: A7-49942-1017

2 cylinders, speed 1440 rpm, low noise, with emergency stop button, capacity 750 liters per minute, pressure tank 257 liters capacity, automatic condensation drain system of the pressure tank and main shut-off valve, automatic moisture and air filter regulator, automatic shut-off at 10 bar pressure. With thermal motor protection. Polar Hiross DXB012S. S, 220 volts, with automatic condensation drain system on the freeze-dryer, maximum working pressure 16 bar. Auction-ID: A1-48994-20

SRK-Systemtechnik - Model GT2 LYOVAC Freezer dryer Auction-ID: A1-49883-89