dry used for sale

FLEISSNER, AB 3,500 mm, with 6 drums, 1,400 mm Diameter, built around 1985, but overhauled in 2008 and with new motors and burners. Up to 250°C. With natural gas burners 1000/400 kW SIEMENS control S7 from 2008 with touch screen Motors with frequency converter, 50 m per minute, up to 250 °C

A continuous drying system ESC with an integrated UV intermediate module for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculating air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. UV intermediate module: belt width: 1700mm, emitters: 2, max. emitter power: 120W/cm. Belt height: 900mm, outlet element length: 500mm, inlet length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible.

Key data: 80 KW, 400 V

Dry cooler 2 fans Ø910 mm; Tube volume: 59.7 l; Medium: air / ethylene-glycol mixture; Operating pressure: Maximum 10 bar (test pressure 11 bar); Temperature range: -25 °C/ +60°C Length 4.20 m; width 1.18 m; height 1.50 m Loading FREE Truck more photos on request

Fluid bed manufactured by INOJETT in 2004. Model IEV800-001-2004 Peripherals included: DFO 4-32-R baghouse Air heater Technical characteristics Model IEV800-001-2004 Year of manufacture 2004

A continuous drying system ESC for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculated air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. Belt height: 900mm, discharge element length: 500mm, infeed length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible.

Very well preserved compact drying chamber MÜHLBÖCK type QLSF-2x1,2-3x1,2-13 / Built in 2004. Complete system including control. Heat requirement 330 kW. Plant still in operation! Complete transport by truck is possible. Only the counterweight has to be dismantled. If necessary, the matching heater can also be supplied. Dismantling/transport possible on your own. Dimensions / data: see attached drawing

Cyclon heat-insulated from the GEA brand model CYCLONE CHE 394. Year 2017. With 2 cards. Bottom outlet DN100. Top Entry Clamp 1" Clamp 1" and 4" side entrances. No documentation. Cyclon Dimensions: Length 650 mm Width 560 mm Height 1510 mm Technical characteristics Model CYCLONE CHE 394 Year of manufacture 2017 Equipment dimensions INTERIOR BODY WIDTH 560 INNER BODY LENGTH 650 INTERIOR HEIGHT BODY 1510 Transportation Information Length 2150 mm Width 992 mm Height 1100 mm Documentation No documentation Status In your state Manufactured by GEA WESTPHALIA

Absolutely new belt dryer make New Eco Tec Woody 500-100-1.0 SP, built in 2019. Very well preserved, as good as new facility. Immediately available. Suitable for drying fines up to 1.5 to/h. Input moisture up to 50%. Water evaporation up to 500 kg/h! Heating medium warm air 90°C to 110°C. Takeover possible immediately!

Nauta type dryer manufactured by NAUTAMIX ASSEN suitable for drying powders, granules, pastes and sludge. Overall dimensions Maximum diameter in the body 1500 mm Minimum body diameter 280 mm Material Stainless steel Shirt or mid-calf material Iron Technical characteristics Year of manufacture 1979 Working Body Pressure 0.007 bar Working Body Temperature 130 ºC Total Body Volume 1905 L Half-calf/liner working pressure 5 bar Half-round/sleeve working temperature 160 ºC Half-calf/shirt volume 111 L Engine 3.6 kW - 1430 rpm ENGINE 2 0.37 kW - 1300 rpm Equipment Setup Shirt Transportation Information Length 1700 mm Width 1700 mm Height 3000 mm Documentation No documentation Status Refurbished Manufactured by NAUTAMIX ASSEN (HOSOKAWA)

Nucha dryer filter manufactured by BONAZZI MARIO, model BM 12000, with a total volume of 18050 liters. Material TBD Technical characteristics Model BM 12000 Year of manufacture 2001 Status In your state Manufactured by BONAZZI MARIO

Atomizer manufactured by NIRO ATOMIZER in 304 stainless steel, model F10. Material Stainless steel Technical characteristics Model F10 Status In your state Manufactured by NIRO ATOMIZER

Vacuum blade dryer manufactured by FMC OISSEL, with a volume of 6000 liters. Material Stainless Steel 316/316L Technical characteristics Year of manufacture 1972 Working Body Pressure Atm bar Working Body Temperature 130 ºC Total Body Volume 6000 L Half-calf/liner working pressure 3 bar Half-round/sleeve working temperature 130 ºC Half-calf/shirt volume 1200 L Coil Working Pressure 3 bar Transportation Information Length 6000 mm Width 1900 mm Status In your state Manufactured by F.M.C. OISSEL

An industrial drying oven Biagosch & Brandau, which has been overhauled by Neitz, is available. Fuel: natural gas, calorific value: 7600kcal/Nm³, gas pressure: 200mm/Ws, fuel consumption: 2.75Nm³/h, operating temperature: 120°C, heating capacity: approx. 23.3kW/20000kcal/h. An on-site inspection is possible.

Manufacturer: Fikara Type of Machine : Galvanizing Rack System Technical Specifications - Year of Manufacture: 2000 - Year of Overhaul: 2018 - System Type: CE-1 - Heating System - Heating Output: 28 kW - Heating Medium: 3 x 400V, 50 Hz - Nominal Temperature: 70 degrees C - Nominal Current: 40.5 A - Ventilation System - Air Flow Rate: 17,500 m3/h - Motor Output: 6 x 0.55 kW - Voltage: 230/400 V - Nominal Current: 5 x 1.55 A The steel structure is no longer there Find more here - .ucymachines/ Contact us at - sales@ucymachines

For wine and sparkling wine bottles Type: WD/ 12 capacity / hour ca.: 6000

Capacity: 2000-5000 bph Electricity: 9 kW (3 fans), 440V, three phase, 50hz Dimensions: 2250x950x1700mm (H) Weight: 350kg

Manufacturer: Brueckner Model: Power-Predry HDVB3 CF 20/2 Year of Manufacture: 2016 Application: Thermal treatment of flat textile webs Working Width: 600 mm min. to 2000 mm max. Web Speed: 2.5 m/min min. to 50 m/min max. Drive Side: Right Operating Side: Right Number of Drying Fields: 2 Field Lengths - Infeed conveyor belt: 2.4 m - Infeed tower: 0.7 m - Drying fields: 1.6 m (with 1 heating and ventilation section) - Outfeed tower: 0.7 m Ventilation and Heating - Ventilation System: Classic-Flow with adjustable flaps for upper and lower airflow - Heating Medium: Gas - Circulation Temperature: 75 to 150 degrees C - Exhaust Air Volume: max. 6000 m3/h Electrical and Safety Data - Operating Voltage: 400 V AC, plus/minus 5%, 50 Hz - Control Voltage: 230 V AC, 50 Hz / 24 V DC - Signal Voltage: 24 V DC - Noise Emission: equivalent continuous sound level at workstation, A-weighted: ...

Drying cabinet Manufacturer: Memmert Type UM

I am selling a drying chamber - dryer, German manufacturer INNOTECH, type HT 4D. Year of manufacture 2007, fully functional. + 2 trolley, sieves. Make me offer !

Sawn timber capacity: 1.5m³, max. sawn timber length: 4500mm, with control system, aluminum stacking strips and cables as accessories. The system has not been in operation for approximately ten years, the electronics would need to be checked. An on-site inspection is possible.

Microwave tunnel conveyor dryer for continuous drying. Adjustable microwave power and belt speed, PLC control with separate control cabinet. Stainless steel construction and food-grade PTFE belt. Machine available in Switzerland (Martigny). Water cooling circuit included. Ventilation system to extract water vapor from the chamber not included. Technical specifications: General data • Model: HM-40KW-A • Quantity: 1 set • Frequency: 2450 ± 50 MHz • Microwave feed: top feed • Heating chambers: 4 Power / electrical • Microwave power: 40 kW (adjustable) • Rated input power: 50 kW • Power supply: 380 V, three-phase, 50 Hz Conveyor / belt • Belt width: 600 mm • Belt speed: 0.5 – 7 m/min • Conveyor motor: 0.75 kW, frequency inverter • Belt: PTFE food grade (high temperature, fire-resistant, anti-corrosion) • Conveyor height: 900 – 150 ...

Stock# UG6400 Used set of air compressor by Kaeser model FSG520-2W with air dryer by Hybritec type Compact model DTI 668/902. Compressor details: Power consumption: 355 kW Water cooled. Working output pressure up to 10 bar. Flow output: 50.00 m3/min Shipping dims: 3190 mm x 2095 mm x 2125 mm x weight 5900 kg Dryer details: Hybritec Compact model DTI 668/902. air flow - up to 66.7 m3/min Working pressure 5/10 bar Power consumption: 34.5 kW

Dryer with 2 molecular sieves and suction conveyor, 1-silo Silo capacities: 400 l Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Hermetically insulated silo with its own control system

Deze droger van Motan staat bij Plastima Used Machinery in de machineopslag. De droger komt uit 1990 en verkeerd in goede staat. – Merk: Motan – Model: MDC 800 – Bouwjaar: 1990 – Werkuren: 23.710

The drying/conveying system for plastics - Piovan DP615 The drying/conveying system for plastics with 2 molecular sieves, 3 silos Warm air generator with a doubled molecular sieve Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Silos are hermetically insulated, with a capacity of 150 liters, with their own control system Silos can work separately and independently with different materials and temperatures. Silos have a heating and temperature maintenance function 3x Piovan Easy3 vacuum conveyors

UV dryer Superfici Type TU166-25+2UVM55 Serial No. 4548 Year of construction 1998 Passage width 1500 mm 2 UV lamps UV lamps, each 80 watts, length 1400 mm Material thickness maximum 110 mm Maximum width of the workpiece 1400 mm Height-adjustable feet Dimensions 2500 mm x 2300 mm x H 1650 Control cabinet dimensions 1000 mm x 850 mm x H 2180 mm

MORETTO DRYER Model : SX 205 Year: 2013 Airflow: 200 m³/h Static Pressure : 200 mbar Blower Power : 3 kW Dew Point : -45°C

Several used and powerful Gansow professional scrubber driers for trade and industry in stock! These cleaning machines are designed for professional floor cleaning and are in high demand. They are ideal for small and medium-sized areas, e.g. production areas, sales areas, warehouses. Gansow cleaning machines are very manoeuvrable and can be easily guided around obstacles. In order not to waste any cleaning agent, the water is distributed in the middle of the brush. The suction cup ensures the best drying results Delivery is without batteries, incl. charger. The cleaning machines show signs of use, have been tested for function and cleaned. Technical data Manufacturer: Gansow GmbH Co.KG Type: various models, e.g. 54 B 53 Voltage: 24 V Power consumption: 1,646 W Degree of protection: IP 41 Weight: approx. 277 kg We would like to point out that with regard to the Prod ...

Fluid Bed Dryer Design data: -Drying material: quartz sand - Feed capacity: approx. 26,595 kg/h moist, 25,000 kg/h dry - Feed capacity (incl. filter discharge) approx. 25,050 kg/h Aerated concrete granules - Feed capacity: approx. 5,715 kg/h moist, 4,000 kg/h dry Feed capacity (incl. filter discharge): approx. 4210 kg/h

inlet wire diameter 6,5 mm finished wire diamter 1,6 mm number of drafts 8 diameter of capstan 550 mm and 650 mm speed -meters/sek 8-12

WIRBEL K 855 HP 7,5 Industrial Dry Vacuum Cleaner -CE - Identifier -Mint condition -Motor power 5.5 KW -Filter area 1.2 m2 -Tank volume 60 liters -Air flow rate 135 L/sec -Vacuum (vacuum) approx. 300mbar -Suction hose -Connection cable Dimensions: LxWxH 1.2x0.6x1.3 meters / weight 125 kg

straight through inlet wire diameter 2,5 mm finished wire diamter 0,8 mm number of drafts 8 diameter of capstan 400 mm speed -meters/sek 15 m

Grinding bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory finishing round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies, drying granules, desiccant -Manufacturer: Walther Trowal, drying granulate type GM -Grain: see photos -Price/tax: complete -Transport dimensions: 1200/800/H600 mm -Total weight: 72 kg

GOOD CONDITION INDUSTRIAL TUMBLER DRYER MACHINE DE CROWN SST-200 BODY MATERIAL: STAINLESS STEEL SUS304/MILD STEEL. CAPACITY (MAX.WET) : 90KG DIMENSION: 2050mm(L) x 1800mm(W)x2200mm(H) POWER SUPPLY: 415VAC 3PH 50HZ. DRUM DIMENSION: 1480mm (OD) x 990mm(L) DRUM SPEED: 29 RPM.

CONDITION MOTOR DAMAGED NEED TO CHANGE INDUSTRIAL TUMBLER DRYER MACHINE DE CROWN SST-200 BODY MATERIAL: STAINLESS STEEL SUS304/MILD STEEL. CAPACITY (MAX.WET) : 90KG DIMENSION: 2050mm(L) x 1800mm(W)x2200mm(H) POWER SUPPLY: 415VAC 3PH 50HZ. DRUM DIMENSION: 1480mm (OD) x 990mm(L) DRUM SPEED: 29 RPM. GREATGLOVE(THAILAND) CO.,LTD 180/3 MOO 7, SRISONTHON, THALANG,PHUKET 83110 Ms.Supawadee Kumpone, Manager Procurement, F6 email: supawadeegreatglove.com Tel : +6693-7478585 Office : +6676-620190 Ext : 194 Ms.Wilawan Sakulsongboonsisri, DGM Finance,F6 Tel : +6689-1969222 Office : +6676-620190 Ext : 111

INDUSTRIAL TUMBLER DRYER MACHINE DE CROWN SST-200 BODY MATERIAL: STAINLESS STEEL SUS304/MILD STEEL. CAPACITY (MAX.WET) : 90KG DIMENSION: 2050mm(L) x 1800mm(W)x2200mm(H) POWER SUPPLY: 415VAC 3PH 50HZ. DRUM DIMENSION: 1480mm (OD) x 990mm(L) DRUM SPEED: 29 RPM.

Powder cyclone separator, VA

Vibratory dryer WALTHER TROWAL G 100 B Year of construction: 1998 Bowl dimensions: Ø 1100 m x height 1100 mm Inside dimensions: width 200 mm x max height 300 mm Motor rotation: 1500 t/min. Motor power: 0,45 kW Max heating capacity: 3 kW In perfect working condition Weight: 250 kg

Plant for kilning green malt. Hot air is generated at a steam-heated heat exchanger and passed through the kiln by means of a fan. It is possible to regulate the proportions of fresh and circulating air by means of flaps and a bypass. Control takes place by means of a control cabinet., Additional title: vertical vessel; year of manufacture approx. 2005, Kiln dry capacity: 200 Kg, Width: 1,1 m, Height: 3,2 m, Features: Ventilator (Pollrich Ventilatoren GmbH, 2004), air-shut-off valves (EBRO Armaturen GmbH), circular vessel with Optima strauber-sieve bottom (Steinhaus GmbH), insulated hot water vessel Control cabinet

Technical Specifications Manufacturer: EFACEC – Portugal Model: PowerCast Type: Cast Resin Dry-Type Transformer (Encapsulated) Quantity Available: 2 Units Rated Power: 3,700 kVA Year of Manufacture: 1999 Frequency: 50 Hz Phases: 3 Cooling: AN (Air Natural) Vector Group: YNd7 HV Voltage: - 15,000 V LV Voltage: 6,300 V Short Circuit Impedance: 6.8% HV Current: 142.4 A LV Current: 339.1 A Insulation Class: Class F Protection Rating: IP00 Approximate Weight: 8,200 kg

Used bottle washer dryer GAI - 3500 BPHTechnical Specifications & Performance DataThe Bottle Washer Dryer 5008 is a rotary carousel drying unit engineered for reliable bottle handling within a used bottling line or standalone drying station. Manufactured by Cimec, this second hand machine delivers consistent performance for beverage production and industrial packaging applications where efficient moisture removal is required before downstream labeling, capsule application, or case packing.Model: 5008Year of manufacture: 2002Production speed: up to 3,500 bottles per hourBottle formats (volumetric): Compatible with 0.5L and 0.75L bottle formatsBottle geometry: Cylindrical containersBottle diameter range: 60 mm to 115 mmDrying technology: Rotary carousel (hot air) with anti-condensation featuresPLC installed: NoDocumentation: Paper manuals and electrical schematics availableAdvanced Automat ...

Manufacturer: Muhlbock Year of manufacture: 2019 Type: ZLSM3150-3120-1072-11-1306-6,0 Type of machine: Wood drying chamber (kiln) for timber drying Internal length: 2 x 5.00 meters plus 0.72 meters Stack depth: 3 x 1.50 meters plus 2 x 0.10 meters Stack height: 3 x 1.20 meters plus 3 x 0.10 meters plus 0.30 meters Gross stack volume capacity: 162 cubic meters Loading method: Loaded by forklift through an electrically operated lift-folding door with an integrated walk-in door Output quality: The system is designed to maintain the specified wood drying quality while minimizing drying time and cost, according to the manufacturers K5 drying management program Heating capacity: 780 kW, including 858 kW with heat recovery Supply temperature: 95 degrees Celsius Water flow rate: 45 cubic meters per hour Pressure loss: 3.0 mWS / 0.3 bar Supply and return connections: DN 100, PN 10  ...

Used BERTOLASO WDT10 washer dryer - Year 2001Technical Specifications & Performance DataThe Bertolaso WDT 10 is an external bottle washer-dryer engineered for reliable operation in beverage production and industrial packaging environments. It combines mechanical brushing with targeted water jets to remove residues on the bottle body, bottom, and closure area, followed by high-energy air-knife drying. This second hand unit is well-suited for integration within a used bottling line and provides robust construction for continuous-duty applications.Model: WDT 10Manufactured by: BertolasoYear: 2001Speed: 3.000 - 5.000 BPH Function: External bottle washing and dryingWashing system: Rotating brushes with directed water jetsDrying system: Seven blower motors with high-velocity air blades/hot airBottle handling: Infeed worm screw; infeed and outfeed star wheelsConstruction: Stainless steel frame  ...

A complete central plastic granulate drying and conveying system Werner Koch, which was extensively expanded and modernized in 2021, is available. 1) Koch CKT 300 dry air dryer, year of manufacture: 2003, power: 41kW, air capacity: 300m³/h. 2) Koch CKT 500 dry air dryer, year of manufacture: 2021, power: 51kW, air capacity: 500m³/h, control system: Siemens S7. 3) 26x drying hoppers, volume: 11x40l, volume: 13x100l, volume: 2x150l. 4) 38x machine hoppers. 5) 2x Busch vacuum pumps. 6) Automatic Koch Navigator material distribution system, inputs: 26, outputs: 38. Including control cabinets and a central visualization and monitoring system Supervisione 9-7000. Documentation available. An on-site inspection is possible.

An SMT continuous drying system is available. Infeed height range: 850mm-950mm, process chamber length: 12500mm, heating zones: 9, bottom heating zones: 4, heating length: 4500mm, convection section: 4500mm, max. process temperature: 230°C, cooling zones: 12, cooling zone length: 6775mm, cooling units: 3, conveyor type: PTFE belts, conveyor width: 800mm, working width: 800mm, max. speed: 3m/min, top/bottom clearance: 30mm/0mm, exhaust connection diameter: 300mm, machine dimensions X/Y/Z: approx. 13000mm/2000mm/2350mm, weight: approx. 7200kg. Documentation available. An on-site inspection is possible.

Used Calmic Eurovent stainless steel vacuum tray dryer. It has approximately 3 square meters of drying area. Includes (3) individual drying compartments approximately 980mm wide X 1010mm deep X 160mm high. It also includes (6) stainless steel trays approximately 470mm wide X 945mm long X 40mm deep. Material Stainless Steel 316/316L Weight 1155 Kg In your state

Stainless steel nucha filter dryer from the E.BACHILLER brand of 0.4 m2. Year 1987. Hydraulic power plant with 7.5 hp 1410 rpm 50 hz 220 v motor Technical characteristics Year of manufacture 1987 Working body pressure 3 bar Body working temperature 300 ºC Total body volume 680 L Working pressure half-round/liner 3 bar Working temperature of half round/jacket 300 ºC Half-round volume/shirt 28 L Filtration area 0.4 m2 Equipment Setup Hydraulic power plant Transportation Information Length 2100 mm Width 2100 mm Height 2100 mm Weight 500 Kg No documentation In your state

degree: max 1800 working heigth: mm length: mm width: mm depth: mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A 4-level vertical dryer Giardina with a paternoster system for water-based and solvent-based coatings with flash-off, heating and drying zones is available. Workpiece length range: 300mm-3200mm, workpiece width range: 0mm-1350mm, workpiece height range: 0mm-80mm, working height: 950mm, door arrangement: vertical, number of doors: 16, number of trays: 66, levels: 4, accessibility: all sides, number of heating coils: 3. Machine dimensions X/Y/Z: approx. 5350mm/7550mm/6550mm, electrical cabinet dimensions X/Y/Z: 2500mm/500mm/2000mm. Documentation available. An on-site inspection is possible.