We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,301 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Description hopper capacity: 30 dm3 air flow: 20 m3/h temperature range: max 140° C tubo diffusore aria calda removibile per migliore pulizia con magnete incorporato
used
Description hopper capacity: 30 dm3 air flow: 20 m3/h temperature range: max 140° C
used
Description Moretto heater group composed of: Heater: Moretto EH 3A Temperature range: 50 - 140 °C Power: 3,5 kW Voltage: 400 V Aspirator: Moretto F5F40 Capacity: 5 L Power: 1 kW Voltage: 230 V Hopper: Moretto TC150P Capacity: 150 L Pedestal: Moretto Frame
used
Description Moretto heater group composed of: Heater: Moretto EH 2A Temperature range: 50 - 140 °C Power: 2.8 kW Voltage: 230 V Hopper: Moretto TC100V Capacity: 100 L Pedestal: Moretto Frame
used
Description Moretto double tower wheeled dehumidifier hopper capacity: 60 dm3 air flow: 50 m3/h temperature range: 50°-150° C
used
Description Single tower dehumidifier hopper capacity: 100 dm3 air flow: 70 m3/h temperature range: 50-150 C
used
Description DEGA Dehumidification System with 2 Receivers controlled by a Blower Heating power: 9 Kw Blower power: 2.2 Kw Total installed power: 18 Kw Refined air flow: 250 m3/h Maximum Process Temperature: 150 °C Hopper capacity: Approximately 650 litres
used
Description Moretto heater/dryer group composed of: Moretto three-phase aspirator: V2 D40 Moretto container: C101 R42 Moretto hopper: TC 75 Moretto heater: HG 3 T50 Moretto container: C51 R42 Hopper: TC 50 Moretto heater: HG 2
used
Description hopper capacity: 900 dm3 fans power: 2 x 0.5 kW temperature range: 50 - 140 C heating power: 18 kW
used
Description hopper capacity: 100 lt air flow: 90/20 m3 / h temperature range: 50-150 C absorbed power: 6.2 Kw power supply: 400 V
used
Description hopper capacity: 30 Lt temperature range: 0 ° -140 ° C power: 3 Kw 400 V power supply
used
used
inlet wire diameter 6,5 mm finished wire diamter 1,6 mm number of drafts 8 diameter of capstan 550 mm and 650 mm speed -meters/sek 8-12
used
Demo model
used
Without accessories, spare parts and documentation, was maintained regularly, was running one-shift.
used
For melting and curing powder-coated parts, as well as drying and baking painted parts, max. charge weight: 500kg, operating temperature: 100-320°C, calorific value: 10kWh/m³, heating capacity: 90kW, internal dimensions: 2500x1200x1850mm, volume: 5.55m³, connected load: 8.075kW, length: 3800mm, width: 2700mm, height: 3100mm, with instruction manual, without spare parts or accessories.
used
Output: 20t/h, with Burner Weishaupt WM-GL 20 3-A, fuel: oil, natural gas, year of construction: 2018, various elements were renewed in 2018.
used
Inner dimensions: 2100x1200x1800mm, temperature: 30-300°C, heating power: 45kW, motor power: 3kW, length: 2750mm, width: 1900mm, height: 2600mm, with documentation, can be opened from both sides, an inspection is possible.
used
Two identical drying ovens are available, max. temperature: 300°C, external dimensions: 827x895x816mm, internal dimensions: 503x554x644mm, weight: 100kg, on-site inspection is possible.
used
Air dryer technical data: Working pressure, bar 17 Maximum pressure, bar 22 Operating temperature, ° C 36 Power, kW 5,45 The amount of charge, kg 3,97
used
An electric drying oven. Operating temperature: 50°C-250°C, usable space: 2.6m³, heating connection values: 18kW, motors: 0.74kW. On-site inspection is possible.
used
Feed rate: 5-25m/min.
used
System consists of four CTT 300 and three TT 100, capacity: 4x 200/ 3x 100l, connected load: 1.6kW.
used
Hopper capacity: 600l, connected load: 17kW, length: 820mm, width: 820mm, height: 2455mm, weight: 490kg.
used
Circumferential speed: 80m/s, an on-site inspection is possible.
used
A WUMAG TEXROLL cylinder dryer for drying and stretching. Drums: 6 pieces, drum diameter: 560mm, TÜV-tested. Roller width: 3000mm, fabric width: 2800mm. Heating: Steam-heated. Including: Tidland braking system, Montalvo tension measurement, hydraulic outlet tension system.
used
USED INGERSOLL RAND NON-CYCLING REFRIGERATED AIR DRYER
used
Max. working pressure: 16bar, ambient temperature: 3-50°C.
used
Operational pressure: 16bar, Leistung: 5,7kW.
used
There are two Adsorption Dryer MD 200 available, year of construction machine 1/ 2: 2017/ 1998.
used
Volume flow: 470m³/h, operational overpressure: 7-16bar, coolant: 407c, connected load: 1.48kW.
used
Volume flow: 186m³/h, temperature: -10 to 120°C.
used
Air pressure: 0.1-1.2Mpa, air pressure: 60°C, weight: 450kg.
used
Coolant: R 22, charge: 2.5t, operational pressure: 13bar, was maintained by the manufacturer.
used
Operational pressure: 43bar, connected load: 2.1kW, weight: 185kg, was maintained regularly, an inspection is possible.
used
Volume flow: 21.6m³/min, operating overpressure: 7bar, length: 1100mm, width: 1028mm, height: 1829mm, weight: 1.275t, with documentation, an on-site inspection is possible.
new
Air dryer suitable for 7,5kW compressors. Designed for use with Aflatek Screw10A and Screw10A-200 compressors. Technical data: Air Flow 1.5 m3 / min Dew Point 2 - 10 °C Inlet/Outlet diameter G-1'' Power 0,6 kW Matched Air Compressor power kW 7,5 Weight 45 kg Inlet temperature 45 °C Presure 0,8 Mpa Cooler R 134 Current 3 A Size 730x420x720 mm -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.
used
There are two identical drying cabinets available, nominal temperature: 200°C, power: 2000W.
used
Length: 1750mm, width: 1675mm, with documentation.
new
Air dryer suitable for 15kW compressor. Designed for use with Aflatek Screw20A compressor. Technical specifications: Air Flow 1.5 m3 / min Dew Point 2 - 10 °C Inlet/Outlet diameter G-1'' Power 0,6 kW Matched Air Compressor power kW 7,5 Weight 45 kg Inlet temperature 45 °C Presure 0,8 Mpa Cooler R 134 Current 3 A Size 730x420x720 mm -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.
used
Vacuum tumbler Rühle MKR220, built in 2009, in a good used and functional condition. Completely made of stainless steel. Drum volume 220 liters, filling capacity up to 145 kg. Can be retrofitted with polterarm, mixing arm. Speed of the polterarm up to 50 rpm infinitely variable. Programmable Rühle control. Dimensions B/D/H 120/95/175 cm. Connected values 400 Volt, 4.3 kW, 12.1 A. Workshop tested, immediately ready for use. More on request.
used
Max. power: 4000W, max. compressed air supply: 6ar, with Conveying System APS/ALS and Chiller Hyfra LWK 31/1-S.
used
Max. nominal temperature: 200°C, internal dimensions: 371x415x345mm, capacity: 53l, max. load: 40kg, volume flow: 1-30m³/h, connected load: 1.7kW, length: 744mm, width: 630mm, height: 576mm, weight: 82kg, with documentation and vacuum pump, an on-site inspection is possible, has been maintained regularly
used
I sell a screw compressor with air dryer: AIRKRONE 25 SS + Dryer ES30. Powerful engine 18.5 KW / 25 HP 174 m3 / h / 2900 l/min Built in 1997. Approximately 20,000 moto hours. Made in Austria Everything works. Available equal, 2 pcs in stock. Possible also separately without air dryer cheaper to buy. Price by appointment.
new
Advantages of Aflatek 3in1 7.5A: -5.5kW electrical motor. -Integrated 150l air tank. -Air and oil filters as well as oil separator already included. -Low noise and vibrations level. -Compact, vertical design. -Integrated air dryer. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, kW: 5.5 Drive type: Direct drive Motor protection: IP 54 Air supply at 8 bars, L/min: 500 Air tank, L: 150 Dimensions(length x width x height), mm: 1400x700x1380 Weight, kg: 310 Shipping details: Packaging: Plywood box on a pallet Dimensions (length x width x height), mm: 1500x800x1500 Weight, kg: 340 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.
used
Refrigeration dryer make KAESER type TA 5Machine -No: 1.7917.0 Machine -No: 05527 Year 1995Volume flow: 0.55 m³ / hPressure loss: 0.05 barMax. Operating pressure: 16 bareffective power consumption: 0.28 kWRefrigerant: R 22Quantity: 0.320 kgOperating pressure: 25/16 barPower connection: 220 V / 50 HzOutside dimensions approx: 490 x 630 x 742 mmWeight approx: 80 kgused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electrically heated tempering furnace make HERAEUS GmbH Hanau type HM 13Machine -No: 28024, wiring diagram no. 1641Max. Nominal oven temperature: 1150 °Internal dimensions W x D x H: 400 x 650 x 250 mmRated power: 20 kWExternal dimensions: 1500 x 1300 x 1700 mmWeight: 940 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electrically heated tempering furnace make HERAEUS type HM 13Machine no .: 21103283 / 2832-01 Year of construction 1980 m. Inert gas annealing muffleMax. Nominal oven temperature: 1150 °Max. Inert gas muffle: 920 °Internal dimensions: 400 x 250 x 650 mmRated power: 20 kWContent of the gas-flushed room: 68 lOutside dimensions: 1385 x 1915 x 1705 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
2 convection ovens make HERAEUS type UT 5050 EKYear of construction 1981Maximum temperature: 300 ° CInside dimensions W x H x D: 435 x 400 x 480 mmVolume: 105 lelec. Connection: 220 V, 2 kWExternal dimensions W x D x H: 800 x 650 x 670 mmWeight approx .: 65 kgsecond handPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric Hardening Furnace Fabr. NOLZEN Type KHR 30/20/50Machine No: 12272 Year 1968Internal dimensions: 300 x 200 x 500 mmMax. Temperature: 1100 °Max. Connected load: 14 kWOutside dimensions: 850 x 950 x 1600 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools