droop rein used for sale

Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1200 kg

Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1200 kg

Set of 5 pieces with tube system and filter unit. Pay attention to Still needs to be dismantled

GRP tank standing on the skirt, polyester tank, reinforced, with inner coating with cone at the bottom, possible density: 1.3 kg /l Volume: 30 m³ Dimensions: Ø 2.85 m x 8 m high incl. skirt cylindrical length: 4.70 m

used, technically overhauled reinforcing steel bending machine. Rotations of the bending disc 8/16 rpm. Connection 16 A Single bending max. 1 piece of reinforcing steel 38mm D., 2 pieces of reinforcing steel 28mm D. Standard bending tool 2 pieces of foot switch with emergency stop function.

The Progress Rotary Judge is equipped as follows -5 rotors with directional nozzles 8-16mm D. wire -1 rotor with straightening rollers for 20mm D. wire. - Straightening extension 14m. with row of hooks. -6 pieces of driven reels 5 to. at call

Reinforcement Sleeve Set, Reinforcement Sleeve PARKER 8 TIZ.375-SS ( 8TIZ.375-SS ) Tube Diameter(Inner): Ø 10 mm Tube Diameter(Outside): Ø 12 mm Reinforcement Sleeve Set consists of 30 sleeves ! stainless steel. New ! Dimensions(Single Sleeve): 12 x 12 x 16 mm Dimensions: 100 x 80 x 20 mm

- Material: DIN 1.4404 / AISI 316L - Surface : 3D (BA) Dimensions: - Width: 1475 mm - Depth: 2750 mm - Height: 3700 mm - Ground clearance: 500 mm Design: - Rectangular manhole 310 x 420 mm - Residual drain butterfly valve DN 40, Friedrich no. 2 - Clear drain Angled seat free-flow valve DN 40, Friedrich no. 2 - Clear drain butterfly valve and swivel elbow DN 40, Friedrich no. 2 - Level indicator - Cooling plate - Handwheel taster - Dome NW 400 mm with swivelling cover

used, technically overhauled cutting machine Peddinghaus Simplex 60 H Hydraulic hold-down. The cut is triggered by a footswitch with emergency stop function. The shears are electro-hydraulically driven. Connected load 11KW 400V/32A Max. cutting capacity 3 bars 28mm diameter reinforcing steel.

Stahlblech lackiert Innenliegende Rohre: 200 mm lang Ø 25 mm - Width 635 mm - Height 400 mm - Depth 420 mm - mobile - Wiht mobile cleaning basket aus Stahlblech, 395 x 620 mm - Location on stock

Used, technically overhauled reinforcing steel shears. Footswitch with emergency stop function. Hydraulic counter holder Cutting capacity max.1 rod 45mm D. Power 11 KW.

Plants were only in operation for one year. Designed for 5t coils. More photos on request. Last photo is of the drive motor.

Big bag traverse, lifting sling, adjustable traverse, crane traverse, overhead crane, crane hook traverse, load traverse, heavy load traverse, cross traverse, H-traverse -Crane traverse: Traverse for reinforcing steel mesh or similar -Load capacity: 5 tons -Hook chain: Length 940 mm -Transport dimensions: 2920/2365/H540 mm -Empty weight: 315 kg

Reinforcing steel mesh shears such as guillotine shears, sheet metal shears, sheet metal guillotine shears, hydraulic shears -Manufacturer: Maschinenfabrik Bock, hydraulic guillotine shear, reinforcing steel mesh shear type 2550 -Cutting width: 2500 mm -Max. cutting capacity: Ø 12 mm double at 100 mm pitch -Motor: Dietz 7.5 kW -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3130/1080/1465 mm -Weight: 2000 kg

Machine: Briquetuse Briquette Ø: 50 mm Output: 30 - 50 kg/h (depending on material) Engine: 5.5 kW Voltage: 400 V, 3 Ph Consumption: 15 A Fuse protection: min. 16 A Cable cross-section: 6 mm² (≤10 m) Hydraulic power unit: capacity 100 L Weight: 700 kg Auction-ID: A1-45443-29

Set of 5 pieces with tube system and filter unit. Pay attention to Still needs to be dismantled Auction-ID: A1-44726-136

Mercedes-Benz Sprinter 313 CDI Flatbed – Reinforced axle version General vehicle data • Manufacturer: Mercedes-Benz • Model: Sprinter 313 CDI (Type 906 OK 35) • Registration date: 13.03.2007 • Mileage: 150,000 km • Engine: 2,148 cc diesel (OM646) • Power: 95 kW / 129 hp • Transmission: 6-speed manual transmission • Propulsion: rear-wheel drive • Emission standard: Euro 4 with diesel particulate filter • Permissible total weight: 3,500 kg • Payload: approx. 1,350 kg • Towing capacity: 2,000 kg braked / 750 kg unbraked • Technical inspection valid until: 06/2026 • Approval: Truck open box Chassis / axles (reinforced version) • Front axle reinforced – axle load 1,650 kg • Rear axle reinforced – axle load 2,250 kg Structure • Flatbed with aluminium side walls • Lashing eyes in the loading floor • Side wall closures ...

Working height: 1035mm, usable width: 6000mm, max. usable length: 6000mm, max. wire diameter: 12mm, max. tensile strength: 650N/mm², bending capacity (number of bars): Ø12mm: 40 bars, Ø10mm: 60 bars, Ø8mm: 90 bars, Ø6mm: 150 bars, Ø5mm: 200 bars, geometry/bending data: smallest leg between two angles: 50mm (with bending finger Ø17mm), standard bending finger: no.60, Ø40mm, number of programmable bending angles: 20, memory positions: 100, speeds: first speed: 45°: max. 5.8s, 90°: max. 8.7s, 180°: max. 13.7s, second speed: 45°: max. 2.9s (complete cycle forward/backward), 90°: max. 4.4s (complete cycle forward/backward), 180°: max. 6.8s (complete cycle forward/backward), mechanics/hydraulics: 4 double-acting hydraulic cylinders, hydraulic unit with pumps, solenoid valves, pressure regulators, safety valves, delivery without oil, operation/control: control panel with keyboard  ...