droop rein used for sale

Vertical Milling Machine Droop & Rein type FS130 Travel X 2000 mm Travel Y 1000 mm Travel Z 1000 mm Spindle SA 50 Sensitive spindle exit: 200 mm Rotation from 31,5 to 1600 RPM Table size 2400 x 1070 mm Year of construction 1976 Throat depth 950 mm Head Tilt head Spindle motor 22 kW Scale HEIDENHAIN 3 axes New electrical panel in 2006 Voltage 380 V Width 3500 mm Depth 4700 mm Total height 4500 mm Weight 26 T

x-travel: 2000 mm y-travel: 1000 mm z-travel: 800 mm spindle turning speed range: 4 Stufen von spindle turning speed range: 20 - 3150 U/min spindle taper: SK 60 + SK 50 milling head -swivable +/-: 45 ° copying travel - horizontal/cross: 300 mm copying travel face: 200 mm distance spindle /table: 200 bis 1000 mm distance spindle center to column: 1120 mm table surface area: 4400 x 1000 mm table load capacity: 8000 kp total power requirement: 30 kW weight of the machine ca.: 56 t dimensions of the machine ca.: 7,5 x 5,0 x 4,4 m Machine is in an excellent condition, continuously maintained by the manufacturer • Control D + R, extended with HSM • DROOP & REIN - copy control type kc • HF spindle TDM HK 12-02, 15000 rpm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table length: 3000 mm Table width: 1250 mm Longitudinal X: 2400 mm Cross Y: 1250 mm Vertical Z: 1000 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 415 Make Droop Rein FSM Type FSM 1255 DA 30 kc N Year 1991 HeidenHain TNC 415 Table length (mm)L = 3.000 Table width (mm)W = 1.250 Longitudinal X (mm)X = 2.400 Cross Y (mm)Y = 1.250 Vertical Z (mm)Z = 1.000 130 / Bt50 / 3150 Rpm Copy attachmentAngle + / - 45 Gr Weight 47.500 Kg Power 30 kW  

FIXED BENCH MILLING MACHINE with SWIVEL VERTICAL HEAD and PRISMATIC GUIDES. Brand : DROOP & REIN.
 Model: FS130gku.
 Table: 2200 x 800 mm. Long crossbar : 1700 mm.
 Transverse crossbar : 870 mm.
 Vertical crossbar : 800 mm.
 Spindle taper : ISO 50. THE MACHINE IS EQUIPPED WITH A VIEWER.

Vertical copying and milling machine Make: Droop & Rein Type: FSM 1255 DA 30 kf Year of construction: 1990 Commissioned: 1992 Control: Fidia CNC 11 Spindle Ø: 130 mm Spindle speeds: 80 – 3150 rpm Max. milling power: 30 kW Spindle bore: SK 50 Quill stroke: 200 mm Swivel: + / - 45° Travel: X-2400 mm Y: 1250 mm Z-1000 mm Feed range: 5 – 3000 mm/min Rapid traverse: 6 m/min Clamping surface: 3000 x 1250 mm Max. table load: 10 to Total power requirement:55 kW Space requirements: approx. 8500 x 5500 x 4500 mm Weight: approx. 47 tons

This Droop & Rein FS 130 SKE Vertical Machining center was manufactured in the year 1978. It is equipped with a HEIDENHAIN iTNC 426 control unit and has 3 axis. The machine has a spindle speed of 31.5 – 1600 rpm. The machine was completely overhauled in 2022. See information about overhauling details in PDF (DE) attached. Contact us at any time for further questions.

x-travel: 5300 mm y-travel: 2500 mm z-travel: 1200 mm angular milling head: Table load: 60000 kg column daylight: 2700 mm workpiece height max.: 1700 mm Table dimensions: 5000x2250 mm control: Heidenhain type: 430 : total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mm x-travel: 4000 mm y-travel: 2200 mm z-travel: 1500 mm : 270 mm spindle turning speed range: 20-2000 U/min Control: Heidenhain type: TNC530i table surface area: 3000x1600 mm table load: 40 t spindle taper ISO: 50 spindle motor: 50 kW T-slot - width: 28 mm number of T-slots: 9 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 4000 mm floor-plate width: 1600 mm floor-plate height: 300 mm T-slot - distance: 175 mm T-slot - width: 28/48 mm number of T-slots: 9 total power requirement: kW weight of the machine ca.: 10 t dimensions of the machine ca.: 4000x1600x250 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3300 mm y-travel: 2200 mm z-travel: 1300 mm w-axis: 350 mm workpiece height: 1700 mm milling spindle diameter: 140 mm diameter of quill: 230 mm milling head speed: 40-2000 U/min transmission ratio: 4 table surface area: 4260x2000 mm T-slot - distance: 175 mm T-slot - width: 28 mm number of T-slots: 11 workpiece weight: 300000 kg milling spindle motor: 30 kW Feed: 5-3000 mm/min control: Fidia total power requirement: kW weight of the machine ca.: 80 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 3500 mm floor-plate width: 1600 mm floor-plate height: 180 mm T-slot - distance: 175 mm T-slot - width: 30/50 mm total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 4000x1600x250 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mm y-travel: 1000 mm z-travel: 1000 mm Control: Heidenhain type: TNC 430 : spindle turning speed range: 15-1450 U/min Table area: 2300x1200 mm Spindle: 200 mm spindle stroke: 200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Nr 3762 Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mm y-travel: 2000 mm z-travel: 1300 mm Control: Heindenhain type: TNC530i : table surface area: 5200x2000 mm Table load: 30000 kg pinole diameter: 230 mm number of T-slots: 11 T-slot - width: 28 mm T-slot - distance: 175 mm spindle taper ISO: 50 turning speeds: 40-2000 U/min spindle motor: 30 kW transmission ratio: 4 total power requirement: kW weight of the machine ca.: 70 t dimensions of the machine ca.: 10x5,5x5,8 m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5300 mm y-travel: 3300 mm z-travel: 1300 mm Table load: 50000 kg column daylight: 2600 mm workpiece height max.: 1700 mm Table dimensions: 5000x2000 mm control: Heidenhain type: ITNC530 : angular milling head: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X/Y/Z: 3000 mm x 2000 mm x 1200 mm. Control unit : Siemens 840D 3 axis linear slide Machine can be seen in working condition

Description X-axis 8500 mm Y-axis 600 mm Z-axis 650 mm Admission in spindle (ISO) BT 30 Control Siemens Toolchanger yes Number of toolholders 12x Length 10700 mm Depth 2700 mm Height 3100 mm

Vertical milling machine / metal milling machine; - travels x, y, z 1900x1020x1020 mm; - Table surface 2400 x 1000 mm; - Tool holder SK 50; - Spindle speeds 20-1000 rpm; - Spindle motor 26 kW; - Spindle diameter 130 mm; - with clamping table; -Abm. 1000x650 mm and tools; -Space requirement approx. 4.8 x 5.3 x 4 m.

X-travel: 1700mm, y-travel: 800mm, z-travel: 800mm, max. load: 6t, clamping surface: 220x800mm, controls: HEIDENHAIN Positip 850.

Universal milling machine Ecomil 100 Heidenhain Control TNC 124 SK 50 56 shots with tools Spindle head swivel Quill extendable 700 x 2000 clamping area Control retrofitted. Feed continuously variable all axes Rapid traverses Length 3.20 m Width 2 m Height 3.50 m Weight 14 tons Spindle 20 - 1000 rpm T slots 22/42 min distance 140 mm

x-travel: 8000 mm y-travel: 920 mm z-travel: 1000 mm Control: total power requirement: kW weight of the machine ca.: 30 t dimensions of the machine ca.: m Year of construction approx. 1970 X 8000mm Y 920mm Z 1000 mm Head rotates 180° Table Length 3600mm Width 920mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2400 mm y-travel: 2000 mm z-travel: 1450 mm table surface area: 5000 x 1400 mm spindle taper: SK 50 Control: Fidia C1 throat: 1500 mm with digital readout ball screw extensive toolings and accessories! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe broaching machine -slotting machine , keyseating machine, slot broaching machine Rotary table, rotary indexing table, dividing head, dividing head Grooves: straight, ring, oval, spiral video available - Chuck diameter: O315 mm - Inner bore: O 98 mm - max. stroke: 250 mm - Rotating three-jaw chuck: grooving in bores (bushes) - standing three-jaw chuck: for grooves in bores (without freewheel) - slot broaching tool, - Dimensions: 1820/830 / H1310 mm - Weight: 1330 kg

x-travel: 3300 mm y-travel: 800 mm z-travel: 1100 mm tool adaptor: SK40 weight of the machine ca.: 28 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:2300 mm y-travel:1200 mm z-travel:950 mm feed::max. 4000 mm/min spindle turning speed range:31,5 - 1.600 1/min spindle taper:SK 50 spindle drive:30 kW milling head -swivable +/-:45 ° distance spindle /table:max. 1200 mm table surface area:3000 (4200) x 1200 mm table load capacity:10000 kg Control:TNC 426 HEIDENHAIN weight of the machine ca.:38 t CNC milling machine, from 2008 with HEIDENHAIN TNC 426 control, in 2022 overhauled, 2 pcs. workbenches 2 pcs. tool cabinet lot of tools (around 140 pcs.), el. handwheel approx. 69.000h "machine on, 18.500h "spindle on" very good condition, under power in factory

table diameter:1400 mm x-travel:2200 mm y-travel:1200 mm z-travel:1100 mm c-axis:360.000 x 0,001 b-axis:+/- 60 ° w-axis:350 mm distance spindle center to column::1100 mm table load:6 t spindle drive:15 kW Torque:4600 nM spindle turning speed range:10 - 1600 U/min spindle taper ISO:50 no. of tools in the magazine:20 Stück total power requirement:45 kW weight of the machine ca.:30 t dimensions of the machine ca.:5,8 x 5,8 x 4,9 m Machine complete overhould and retrofit in 2001 with SIEMENS 840 D control for 6 axis - tool changer for 20 tools - spindle quill 350 mm as W-axis - rotary table as C-axis - angualar milling head indexable - oil cooler, chip conveyor, hand operating panel.

-Year of construction: 1965 ( Complete overhaul and conversion to CNC 2003 by Rottler for 750,000.00 Euro ); -Heidenhain LB 382 C length measuring system; -Accuracy = +/- 0.005 mm; -Portal passage approx. 2300 mm W x approx. 1300 mm H; -Dimensions of required floor space: -Height approx. 4,250 mm, width approx. 3,900 mm, length approx. 20,000 mm; -Specifications: -X-axis (movement: table to move horizontally); -Table - feed speed 0-5900 mm/min (1350 r/min); -Table - rapid traverse speed 0-5900 mm/min (1350 r/min); -Table - travel 8500 mm; -Table - feed force 161729 N (125 Nm); -Y1 / Y2 axis (headstock moving horizontally); -Headstock - feed speed 0-1515 mm/min; -Headstock - rapid traverse speed 5900 mm/min; -Headstock - travel 2100 mm; -Feed force 30000 N; -Z1 / Z2 axis (quill moving vertically); -quills - rapid traverse speed 420 mm/min; -quills - travel 400 mm;  ...

Reinforced steel scissors Round iron scissors Scissors Manufacturers Muhr and Bender Type 50N/22 and 50N/28 50N/22 intersects at 450N/mm2: Round: 22mm Square 22mm Flat: 35x10mm 50N/28 intersects at 450N/mm2: Round: 28mm Square 24mm Flat: 40x15mm Both machines new and ovp Special price

5068 - WELDING GRID SHEARS, REINFORCING STEEL SHEARS, REINFORCING STEEL CUTTING, WELDING GRIDS, FLAT WEAVING SHEARS Cutting width: 3900 mm Length: 4750 mm Width: 1450 mm Height: 2750 mm

Stahlblech lackiert Innenliegende Rohre: 200 mm lang Ø 25 mm - Width 635 mm - Height 400 mm - Depth 420 mm - mobile - Wiht mobile cleaning basket aus Stahlblech, 395 x 620 mm - Location on stock

Reinforcement sleeve set, reinforcing sleeve PARKER 8 TIZ.375-SS ( 8TIZ.375-SS ) Pipe diameter (inside): Ø 10 mm Pipe diameter (outside): Ø 12 mm Reinforcement sleeve set consists of 30 sleeves ! stainless steel, unused ! Dimensions(single sleeve): 12 x 12 x 16 mm Dimensions: 100 x 80 x 20 mm

Reinforcement sleeve set PAGUS VSH 15 x 12 Inner diameter: Ø 12 mm outer diameter: Ø 15 mm Hull diameter: Ø 13.5 mm Sleeve length: 18 mm Material: Brass Reinforcement sleeve set consists of 100 pieces ! New ! Dimensions: 150 x 100 x 50 mm

Description: . Approx. Onsite Dimension. (l x w x h): 1,300 x 800 x 1,100 mm, weight approx.: 300 kg

- chainsaw REINHARDT NC 800 H ECONOMY LINE _ suction cup JOULIN REINHARDT NC 800 H crosscut saw cutting width 800mm computer for flow optimization saw motor 6.3 kw -blade diameter 500 mm variable feed speed 120m/min max - power 3.5 kw hydraulic power unit 1.5 kw motorized infeed rollers 2x5000mm 2 cutting positions: wide 800mm - narrow 150 mm right or left ejector rollers 2x2500mm total line length 17m VENTOUSE JOULIN 500TS on heavy-duty HEB 260 gantry crane 6.30X6.30M 2 gripping stations machines available

GRP tank standing on the skirt, polyester tank, reinforced, with inner coating with cone at the bottom, possible density: 1.3 kg /l Volume: 30 m³ Dimensions: Ø 2.85 m x 8 m high incl. skirt cylindrical length: 4.70 m

New shredder Brand: REINBOLD Type: AZR 800 Special 22 kW The AZR series is known for its power. By means of the solid construction the machine also shredders bulky and bigger workpieces. Standard equipment: A row of round knives Ø40 mm with concave shape Turbo coupling Pusher Strenghed screen Switch cabinet with SPS control and 5 m cable Automatical switch-off function at empty container Safety package with gear box end switch and reverse counter Vibration damping machine feet GS-sign (dust tested) & CE-sign Technical data: Hopper opening: approx. 800 x 1200 mm Fill height: approx.1.610 mm Container volume: approx. 1,1 m³ Working width of the rotor: approx. 740 mm Rotor Ø: 354 mm Power main motor: 30 kW - 400 V - 50 Hz. - 3 Ph. Power hydraulical motor: 0,75 kW - 400 V - 50 Hz. - 3 Ph. Rotor speed: approx. 90 rpm. Number of blades: 20 pcs. round knives Kin ...

Briquet press Make: Reinbold Type: RB 30 SV New machine Technische Daten: Reserve container approx. 1044 x 1044 x 1010 mm Hydraulic motor: 5,5 kW Briquett-Ø 50mm Oil quantity: 100 l Weight: Approx. 700 kg The max. material moisture should not exceed 18% Description The whole briquet unit consist of an easy-maintenance hydraulic, a powerful drive for the agitator as well as the the fill and press cylinders. The unit is compact placed on the machine. The accessable construction makes the service easy. Hydraulic unit consists of: motor, pressure switch, valve block, manometer, oil filter Switch box mounted on container, with SPS-Control Automatic Star-Delta-start Low oil switch Screw conveyor channel, screw conveyor Manual cylinder control Automatic end positioning of all cylinders Safety switch for oil temperature Connection for transport hose or c ...

Reinbacker- rope turning lathe chuck up your part- twin routers transverse your material as lathe slowly rotates your material several passes give you a straight or tapered spiral like a rope turning or straight or spiral flutes

Parts Entfettungs-car wash using cold cleaner (water dilutable) system runs in circulation with foot operation with 1 / 2 cleaning brush pump with the foot switch from the Fassvorat detergent. Operation at 230V immediately on supply of detergent in use.

for cleaning cocoa beans Capacity up to 1200 kg/h cocoa beans completed and tested Video available

Sheet metal plastering machine Reini 60? Product? Manufacturer: Metall- und Apparatebau GmbH? Type: Reini 60? Year of construction: 1990? Condition: used, tested, baker's condition? Material: stainless steel? Cleans with rotating brushes? suitable for 3 rand sheet sizes 60 x 80 cm? With 2 parking brakes? External dimensions W.: 79 cm, D.: 55 cm, H.: approx. 135 cm (height with attachment)For details see pictures

machine measurements: 3200x1700x2100 mm machine weight: -- kg power capacity: -- kW Condition: used Specification: Ultrasonic cleaning system type: Fisa 3VSD 150D - ultrasonic cleaning system consisting of: (see description) 1. tub 1 - cleaning agent 2. tub 2 - tap water 3. tub 3 - preservative 4. cleaning area 5. control - Cleaning cycle in tub 1 approx. 10-20 minutes - Operating temperature between 70-75°C - Extraction ON during cleaning process (Extraction fans are not are not included in the scope of delivery. - Cleaning with water in tub 2 - Cycle time in tub 2 approx. 10-20 minutes - Preservation in tub 3 - Preservation cycle time in tub 3 approx. 10 minutes - Blowing off the parts in the cleaning area under suction - incl. two cleaning baskets - The motors for the suction system in tub 1 and in the cleaning area are not included in the scope of delivery.  ...

- sheet metal cleaning machine for 2-, 3- and 4-edge sheets; smooth and perforated - for baking trays with 58cm width (58x58cm, 58x78cm, 58x98cm) - Dry cleaning with integrated brush lubrication - high output with up to 750 sheets per hour -Operator panel with status displays in national language -Daily and total piece counter, maintenance interval display -easy operation, care and maintenance -movable on castors with locks

Capacity: 1900 Watt Temperature Dryer: 45 °C volt: 230 V Clunz & Jensen C85 plate cleaning unit Online version plate width: 230 - 850 mm Plate length: 300 - 1100 mm Plate thickness: 0.15 - 0.30 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Bürkle Bürste Aufsatzeineheit, Type: Reinigungsbürste, Year: ca.2005, Dust removal brush: yes, Diameter of brushes: 150, Number of units: 1, kW Leistung Motoren: ca 0,75, Number of rotations controlled: 250-750, Units mounted upright: yes, Fast exchange device: yes, Working width mm: 1350, Through running hight mm: 120, Year :ca.2005

Manufacturer: Eurotecno, Type: Reinigungsbürste, Dust removal brush: yes, Working width mm: 1300, Roll transport: yes, Feeding speed continous adjustable: yes,

Manufacturer: Holtkämper und Adoplh, Type: Reinraum Spritzkabine, Year: 1996, Schleifraum m²: yes/, Lackierraum m²: yes/, Trockenraum m²: yes/, Zuluftfilterdecken: 2, Wet splashback: 2, Length max mm: 4000 X 2100, Sliding doors: yes, Number of spray booths: 1, Number of evaporation booths: 1, Underfloor exhaustion: yes, Hand spraying stations: 2, Radialventilatoren: 5, Exhaust air device: yes, Ex-installed lamps: yes, Air entry ° C: 12, Air exit ° C: 28, Supply air fan:: 3, Engine power kW: 7,5/3/1,1, Heating medium hot water: yes, Ceilings for incoming air: 2, Sliding doors: yes, Year :1996