droop rein used for sale

Overhauls gearbox Reduction 4,950 : 1 Input shaft counterclockwise Output shaft counterclockwise

Reference number 20156 Brand Gearbox REINTJES Model Gearbox WAF 540 Ratio 3,955:1 Power 660 KW / 885 HP RPM 1650 General condition USED - EXCELLENT CONDITION Status AVAILABLE SPECIFIC INFORMATION SAE Housing SAE 30 Controls MECHANICAL SPECIFIC FEATURES Brackets YES Oil cooler YES DIMENSIONS 80X50X95 Weight (kg) 1000 KG

Used gearboxes Reduction 4:1 Input shaft counterclockwise Output shaft counterclockwise

Panel shears Sheet metal scissors used Manufacturer: RAS / REINHARDT Maschinenbau Type: 82.20 Cutting width max. 2040 mm Sheet thickness max. 2 mm 380 V Dimensions approx. 2500 x 1500 x 1100 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Cleaner /sole cleaner/ for rubber boots Product Boot cleaner for rubber boots / boots Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone 0048/33 812 58 60

Used gearboxes Reduction 3.895:1 Input shaft counterclockwise Output shaft counterclockwise

Cross-cut saw, optimisation saw Make: Reinhardt Model: Quickstop QS 160 P Year of construction: 1992

LISTING ID 22583 BRAND: REINTJES MODEL: WAF 742 RATIO: 3,55:1 POWER: 924.6 kW 1240 HP 1800 rpm SN 62345 FEATURES: Flex. Coupling 21 inch, Controls, Left in, Right out, Brackets

LISTING ID 22583 BRAND: REINTJES MODEL: WAF 742 RATIO: 3,55:1 POWER: 924.6 kW 1240 HP 1800 rpm SN 62345 FEATURES: Flex. Coupling 21 inch, Controls, Left in, Right out, Brackets

Chemical pre-treatment 3 zones for powder coating with spray ring (automatic) and manual Dimensions: Length: 8000 mm Width: 4500 mm Height: 3500 mm Max. workpiece dimensions (automatic): Length: 6500 mm Width: 1000 mm Height: 2300 mm Max. workpiece dimensions (manual): Length: 6500 mm Width: 2500 mm Height: 2300 mm Tanks are positioned at ground level with a sloping floor. Tank No.1 is thermally insulated and is heated by electric heaters. Achievement: 27 kW. Volume of each tank = 1.00 m³. For degreasing (1st tank), a medium pressure pump is used to operate the 1st spray system. The rinsing phases are also operated by a pump with medium pressure via the 2nd spray system. On the bottom i ...

machine measurements: 2.100 x 2.200 x 2.100 mm machine weight: 2.000 kg power capacity: 36 kW Condition: used Specification: cleaning and degreasing system FIRBIMATIC LOGICA 200V closed cleaning system for the cleaning of of metallic components with highly stabilised perchloroethylene - second-hand - Closed cleaning system for the cleaning of metallic components components with highly stabilised perchloroethylene. - PER-based cleaning and degreasing system Possible cleaning cycles: 1. pre-cleaning (spraying) 2. main cleaning (spray and flood cleaning) 3. rinsing (hosing down) 4. vapour degreasing 5. vacuum drying - All cleaning cycles are freely programmable. - Filling volumes: Tank 1: 170 litres Tank 2: 80 litres - Type of solvent: Perchloroethylene - Total connected load of motors: 9.65 kW - Installed electrical power incl. heating syst ...

Inv. Num. : 8161 Type: RSO 32 Producer: Reinhardt Created: 2008 Parameters: The machine is in good condition.

New shredder Brand: Reinbold Type: AZR 600 technical details: hopper opening: approx. 600 x 800 mm input height: approx. 1.640 mm hopper volume: approx. 0,6 m³ rotor working width: approx. 600 mm rotor diam.: 252 mm main motor power: 18,5 kW - 400 V - 50 Hz. - 3 Ph. hydraulic motor power: 0,75 kW - 400 V - 50 Hz. - 3 Ph. rotor speed: approx. 90 U/min tools: 15 pcs. round knives screen size: 40 mm connecting piece diam.: approx. 160 mm air speed: 28 m/s weight: approx. 1.300 kg

New shredder Brand: Reinbold Type: AZR 600 technical details: hopper opening: approx. 600 x 800 mm input height: approx. 1.640 mm hopper volume: approx. 0,6 m³ rotor working width: approx. 600 mm rotor diam.: 252 mm main motor power: 18,5 kW - 400 V - 50 Hz. - 3 Ph. hydraulic motor power: 0,75 kW - 400 V - 50 Hz. - 3 Ph. rotor speed: approx. 90 U/min tools: 15 pcs. round knives screen size: 40 mm connecting piece diam.: approx. 160 mm air speed: 28 m/s weight: approx. 1.300 kg

Manufacturer: Eurotecno, Type: Reinigungsbürste, Dust removal brush: yes, Working width mm: 1300, Roll transport: yes, Feeding speed continous adjustable: yes,

Manufacturer: Bürkle Bürste Aufsatzeineheit, Type: Reinigungsbürste, Year: ca.2005, Dust removal brush: yes, Diameter of brushes: 150, Number of units: 1, kW Leistung Motoren: ca 0,75, Number of rotations controlled: 250-750, Units mounted upright: yes, Fast exchange device: yes, Working width mm: 1350, Through running hight mm: 120, Year :ca.2005

used baking tray cleaning machine wet cleaning Reini R 580 WE, 1.1 kW drive power, 24 kW heating, pump capacity 70 m³/h

Manufacturer: Reinraumkabine, Control: yes, Supply air filter covers: yes, Heizmedium : Warmwasser, Electronic control board: yes, Working height: 3200, Wet splashback: yes, Length max mm: 3000, Inner hight mm: 2890, Sliding doors: 1, Number of spray booths: 1, Number of evaporation booths: 1, Zuluftfilterdecke m²: 25, Floor extraction: no, Supply air system: yes, Grösse L X B X H mm: 18000 X 7000, Radial fan: 2, Ceilings for incoming air: 1, Heating register: 1, Supply air system: yes, Sliding doors: 1,

Screw press for cold pressing of oilseeds - Manufacturer: Reinartz - Type: AP 10/06 - Power: 7.5 kW - Processing capacity (rapeseed): 100 kg/h - Processing capacity (other oilseeds): 70 kg/h - Length: 1900 mm - Width: 600 mm - Height: 1100 mm - Weight: 900 kg

REINHARDT automatic optimizing cross cut line, type Economy Line NC 810 H

Capaciteit slang: max. 2 inch / 50 mm De slang wordt via een rupsbandsysteem in de machine gevoerd en aangestuurd door een elektromotor De invoersnelheid is instelbaar van 0 tot 40 m/min De afstand tussen de banden op het rupsbandensysteem wordt handmatig ingesteld met een handwiel dat is uitgerust met een digitale teller Capaciteit: 500 programma#39;s Eén programma omvat: de onderdeellengte, het aantal onderdelen, de verlengingsregelaar, de loopsnelheid van de slang, de naam van de slang, het programmanummer en de diameter van de slang De slang wordt gesneden met een speciale gekartelde schijf: 520x4x40mm 9 kW spindelmotor met rem Rotatiesnelheid: 3000 tpm Tijdens het snijden houden twee scharnierende kaken, handmatig verstelbaar door een wiel, de slang vast en geleiden deze Het buigen van de slang en het voortbewegen van de snijkop worden uitgevoerd door twee pneumatische cilinders Lu ...

800 litre cleaning tank/ storage tank made of V2A Properties: Volume 800 L Material V2A (AISI 304) 1.4301 Total height 2600 mm Cylinder height 1100 mm Inner diameter 1000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Last Use: Chemical Industry Description: Topsoil: curved bottom Threaded Socket DN 65 Manhole DN 400 Agitator with steam heating inlet Tank cylinder: Beading Subsoil: Cone base screwed on with pedestal forward-drawn residual drain pipe with disc valve DN 50

Reinhardt LTV 100 Oven 200°C Manufacturer: Reinhardt Type: LTV 100 Usable space: 0.65 m³ Steam room:1.04 m³ Power: 10.56 kW Fresh air exchange: 1 l/min Tray with 7 pieces size W x D: 770 x 850 mm Voltage: 380 V Operating temperature: 50°C - 200°C Rated temperature: 130°C Dimensions H x W x D 2050 x 1650 x 1180 mm Chamber: H x W x D 1000 x 800 x 950 mm More items - new and used - can be found in our shop! International shipping costs on request!

- Producer Reinox - Type WW 25/22 - Width 2.600 mm - Height 1.700 mm (2.250) mm - Depth 1.640 mm - Required space 2,75 x 2.45x1,65m mm - With irrigated exhaust system - With water circulating pump - Motor power 4,2 kW - Exhaust pipe 2 x 350 mm - With switch cabinet - In stainless steel - Voltage / HZ 400 / 500 - Location on stock - Voltage fluctuation max. +/- 5 %

This Paul Reinhardt K34G / 1500 panel saw was manufactured in 1995. It features a multi-blade saw with a feeding and stacking system, ideal for efficient panel cutting operations. Contact us for more information.

Suitable for automatic grinding of all types of tools. Accessories: Total enclosure, Knoll E53319 bandfilter system, Numrotoplus software, Numroto software for simple milling cutters and cords,, Numroto software for simple and complex drills, Pallet loader, CNC handwheel, Control cabinet cooler,, automatic tailstock, automatic central lubrication, Glass scales on the X, Y, Z linear axes, Measuring probe, Hydraulic workpiece clamping, Oil collection tray, 2 loading pallets,, 1 grinding wheel holder., X axis travel: 800 mm, Y axis travel: 270 mm, Z-axis travel: 660 mm, B axis travel: 400 °, Rapid traverse: 30/15/30 m/min, Workpiece mount: ISO 50, Tool holder cone: ISO 50, Grinding spindle drive power: 12 kW, Grinding spindle speed stepless: max. 9000 rpm,, Grinding wheel diameter: max 203mm, Connected load approx.: (400V/50Hz), Dimensions L x W x H: 1900 x 2300 x 2300 mm, Weight approx: 5 ...

Sheet metal cleaning machine Reini 60 â Product description âœ" Manufacturer: Metall- und Apparatebau GmbH âœ" Type: Reini 60 âœ" Year of construction: 1990 âœ" Condition: used, tested, Baker's condition âœ" Material: stainless steel âœ" Cleans with rotatable brushes âœ" suitable for 3 edge sheet metal sizes  60 x 80 cm âœ" With 2 parking brakes âœ" Outside dimensions W.: 79 cm, D.: 55 cm, H.: approx. 135 cm (height with attachment) Details see pictures

Panel saw, panel dividing saw, horizontal panel circular saw, dividing saw -Motor power: 6 kW -Speed: 2880 rpm -Diameter max. Saw blade: 340 mm -Cutting height: 100 mm -Saw motor laterally adjustable on dovetail guide: approx. 1000 mm -Saw motor pneumatically adjustable in height -with cleaning brush: 1000 mm wide -Max. Intermediate width: 1700 mm -Dimensions: 2200/1500/H2100 mm -Weight: 1220 kg

Manufacturer: Holtkämper und Adoplh, Type: Reinraum Spritzkabine, Year: 1996, Schleifraum m²: yes/, Lackierraum m²: yes/, Trockenraum m²: yes/, Zuluftfilterdecken: 2, Wet splashback: 2, Length max mm: 4000 X 2100, Sliding doors: yes, Number of spray booths: 1, Number of evaporation booths: 1, Underfloor exhaustion: yes, Hand spraying stations: 2, Radialventilatoren: 5, Exhaust air device: yes, Ex-installed lamps: yes, Air entry ° C: 12, Air exit ° C: 28, Supply air fan:: 3, Engine power kW: 7,5/3/1,1, Heating medium hot water: yes, Ceilings for incoming air: 2, Sliding doors: yes, Year :1996

Gear cutters, module cutters, hob cutters, tooth form cutters, module milling heads, end mill cutters, roller cutters, milling cutters, hob cutters, splined shaft hob cutters, gear hob cutters, slotted hob cutters, rack cutters -Manufacturer: Reinecker, hob cutters, 2 pieces -Type: Ø 70 mm / Ø 67 mm KHSS-E -Hole: Ø 27 mm -Price/Fee: complete -Transport dimensions: 135/70/H70 mm -Weight: 2.1 kg

Optimizing Cross-Cut Saw manufactured in 2021. This Paul Reinhardt SlimLine 110 features automatic cutting capabilities, accommodating wood lengths from 300 to 3000 mm and widths from 30 to 350 mm. It is designed for various wood types, including MDF and solid wood, with a maximum cross-section of 58 x 125 mm. If you are looking to get high-quality cutting capabilities, consider the Paul Reinhardt SlimLine 110 machine we have for sale. Contact us for further details.

Briquetting press Reinbold RB 50 SV – Top condition, ready for immediate use! Only 410 hours of running. For sale is a high-quality briquetting press from Reinbold Entsorgungstechnik GmbH – ideal for woodworking, carpentry or industrial operations, the machine is immediately ready for use. Technical data: Model: RB 50 SV Motor: 5.5 kW Voltage: 400 V (high current) Current: 16 A Frequency: 50 Hz Briquette diameter: 60 mm Hydraulic pressure: 160 bar Highlights: ✔ Robust industrial quality ✔ Reliable & durable technology ✔ Easy to use ✔ Space-saving design ✔ Saves disposal costs ✔ Produces usable fuel briquettes For 25 years, we have specialized in the sale of woodworking machinery. Each of our machines is extensively inspected before sale to ensure reliability. The satisfaction of our customers is our top priority. You are welcome to visit and ...

Sheet metal cleaning machine AWS Reini R60L Automatic Feed For sheet metal dimensions 98 x 58 cm For 2, 3 and 4 edge trays Dry cleaning Dimensions LxWxH: approx. 80 x 60 x 105 cm High output with up to 200 sheets/hour Easy operation, care and maintenance Movable on castors (with hold-up)

Reinecker Universal Tool Grinding Machine WZS-50 CNC Precision Grinding Machine Profile Grinding Machine Hersteller [manufacturer]: Reinecker Type [ type]: WZS-50 CNC Control unit: Siemens Sinumerik 880G Baujahr[construction year]: 10/1992 Incl. extinguishing system Incl. various accessories Travel axis: X – Y – Z – C – E Interface Type: E32R Weight [weight]: 3000kg Approx. (L x D x H): 3m x 3m x 3m Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. We ask for your order. Other machines and systems available from stock – please inquire. We look forward to seeing you. Phon ...

Reini 2000 sheet metal cleaning machine Output approx. 650 sheets/hour with sheet metal lubrication Approx. dimensions: 2000 x 1050 x 905 mm, WxDxH Used machine

max. bore diameter to be ground: 6 bis 100 mm stroke - stepless adjustable: 550 mm grinding depth: ca. 250 mm workpiece weight: 150 kg total power requirement: 15 kW weight of the machine ca.: 4.300 kg dimensions of the machine ca.: 2,7 x2,4 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: M01.43870 frequency: 50 Hz voltage: 400 V : 24 V connected load: 48 kW rated current: 63 A control: Siemens 840 D turning diameter: 250 mm turning length: 100 mm weight of the machine ca.: 7,5 t turning length external: / innen 100 mm workpiece length - min.: 29 mm workpiece length - max.: 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Including attached clamping table 3000x2000x300 Auction-ID: A7-32339-9

Type: FSM 1406 DA 30 kc N, HEIDENHAIN Control TNC426, Tool holder: SK50 4. Main dimensions milling unit milling spindle diameter in front bearing: 130 mm tool holder, Steep taper: 50 Diameter of the milling spindle sleeve: 230 mm Adjustment of the milling spindle sleeve: 200 mm Milling spindle speeds: 80 – 3150 min-1 Drive power: 30 kW Radius: 1500 mm Swivel: ±45° Distance table-milling spindle nose: 250 – 1500 mm Clamping table Workpiece clamping surface: 3000 × 1400 mm Length: 5155 mm Width: 1400 mm 7 T-slots: Middle straightening groove: 22 H7 mm Other T-slots: 22 M11 mm T-slot spacing: 200 mm Max. table load capacity: approx. 10,000 mm Displacements X-axis: 2400 mm Y-axis: 1400 mm Z-axis: 1250 mm Dismantling and loading costs are optional. If the dismantling is carried out on your own, the corresponding costs will of course be reimbursed. Auction- ...

Reinforced steel scissors Round iron scissors Scissors Manufacturers Muhr and Bender Type 50N/22 and 50N/28 50N/22 intersects at 450N/mm2: Round: 22mm Square 22mm Flat: 35x10mm 50N/28 intersects at 450N/mm2: Round: 28mm Square 24mm Flat: 40x15mm Both machines new and ovp Special price

Cutting and straightening system Reinforcing steel processing Manufacturer: PROGRESS 2 bending units for the production of brackets. Making straight iron to length. Or straight irons with hangers. Roller conveyor 14 m Hydraulic shears up to 9 m Computer-controlled Software latest version 2019 Good condition. Export/price net ex location S-Anhalt 18,000,-- € I offer as an intermediary on behalf of the owner. The information is non-binding, prior sale is reserved. The offer prices are net. If you don't like the price, please let me know your ideas. I am committed to realizing a price that meets your expectations. I am happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 (also WhatsApp) w.goldmannt-online

WEMET LT-BEST reinforced cage production line was built in 2011 in Poland by WEMET Sp. C. The line is designed for the fully automatic production of reinforcements, which are used in many structural elements, such as tie beams, girders, lintels and columns. The well-thought-out design, combined with the application of many modern solutions, ensures maximum production efficiency. The rebars in the coils are straightened by a reliable straightening machine and then fed into a multi-spot welding machine. The resulting reinforcing mesh is then properly cut and bent, creating high-quality reinforcement cages. The reinforcement made in this way ensures the durability and stability of the reinforced concrete structures. The WEMET rebar cage production line on offer has so far worked together with the EPS production line that is available in our range. Together they made modern solutions for  ...

Reinforcing steel shear, reinforcing steel cutting machine, construction steel shear, profile shear, punch, punching machine -Manufacturer: L & L, steel shear with chassis -Type: FM1001 -Drive: 1.5 kW motor -Cutting width: 20 mm -Cutting height: 100 mm -Dimensions: 1160/500/H765 mm -Weight: 334 kg

Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1140 kg

Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1200 kg

GRP tank standing on the skirt, polyester tank, reinforced, with inner coating with cone at the bottom, possible density: 1.3 kg /l Volume: 30 m³ Dimensions: Ø 2.85 m x 8 m high incl. skirt cylindrical length: 4.70 m

used, technically overhauled reinforcing steel bending machine. Rotations of the bending disc 8/16 rpm. Connection 16 A Single bending max. 1 piece of reinforcing steel 38mm D., 2 pieces of reinforcing steel 28mm D. Standard bending tool 2 pieces of foot switch with emergency stop function.