drilling machine used for sale

Drill, drill press, pillar drill, pillar drill -Manufacturer: Gosmeta, pillar drilling machine type B-30N -Motor: 1.1kw -Speeds: 110 - 920 rpm, 5 levels -Table size: Ø 330 mm, travel 510 mm -Spindle mount: MK3 -Spindle stroke: 125 mm -Projection: 300 mm -Columns Ø: 120 mm -Dimensions: 490/750/H1850 mm -Weight: 282 kg

Diamond core drilling machine -Drill stand -Vacuum pump -Core drill: Ø 202 mm -Dimensions: 500/370/H1070 mm -Weight: 53 kg

Diamond core drilling machine -Drill stand -Vacuum pump -Water pump tank -Core drill: Ø 15/20/3x 25/3x 28/32/40 mm

Triade Turned Drilling Machine Number of spindles: 3 Spindle system: Rights 3kw Left 3kw Side 0.75kw Pneumatic control Pneumatic Component Clamp

This ERLO TH-40 (2017) Drilling machine was manufactured in the year 2017 in Spain and has 4080 production hours. It is equipped with a Mitsubishi M700V/M70v Series contoller (Spindle speed: 750 - 4000rpm).

4-Spindle Paper Drilling Machine Ideal 504 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

For sale CNC vertical glass drilling machine ZAFFERANI GLASS, model AZV MILL 550, year 2018 in very good condition.

Description: Column drilling machine with belt drive, control range 100 - 1000 weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 700 x 1,500 mm

Description: Drilling machine vice Jaw width 100 mm Clamping range 100 mm Clamping height 40 mm Weight 9 kg Dimensions L x W x H 290 x 130 x 65 mm Approx. Onsite Dimension. (l x w x h): 290 x 130 x 65 mm, weight approx.: 9 kg

2-hole paper drilling machine Hole spacing 80mm Paper Insertion Height 45mm Heavy Cast Iron Table Table size W61 x D80 x H68 cm 220V=1.9A / 380V=1.1A

Floor Type Milling and Boring Machine SKODA Model: WD 250 Offer ID: 452 Manufacturer: SKODA Model: WD 250 New in: 1969 Condition: very good, under power,being serviced Localisation: Poland - We are owner this machine ! Technical details Rotary table: 2 000 x 2 000 mm Floor plates (8 psc): 3 000 x 1 500 mm Spindle diameter: 250 mm Bed haight: 600 mm Bet width: 2 400 mm X Travel: 5 000 mm Y Travel: 4 000 mm Main spindle intersection: 250 mm Main spindle ball metrical: 140 mm Maximum moment on the main spindle axis: 300 000 kgcm Intersection of the rapid spindle: 125 mm Ball in the rapid spindle: 430 mm Maximum depth of boring with main spindle: 2 250 mm Maximum depth of boring with the rapid spindle: 630 mm Feed of the spindle's crosshead: 500 mm The deepest position of the main spindle axis over the bearing: 1 100 mm Dimensions: 12 500x6 000x9  ...

Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!

Spindle speed continuously variable electronically 40-4000 RPM Thread cutting capacity max M8 Thread-cutting depth digital depth display digital speed display digital drill depth indicator Drilling depth stop on stop ring Feed / hand Table height with rack and pinion Duration / standard ALB ear performance steel Ã? 13 mm / 15 mm Depth 60 mm Projection 225 mm Column diameter 60 mm Usable table area (B x L) 330 x 250 mm Machine dimensions (W x D x H) 420 x 450 x 860 mm Engine dimensions (with VP) (W x D x H) 452 x 700 x 1130 mm Weight 62 kg max distance spindle/table/stand 300/ 360 mm Motor alternating current with frequency inverter 230 V, 0,54 kW Warranty: 3 years Free House including packaging (Germany only)

Manufacturer: UNION - Gemany Model: BFT 130 / 5 Condition: very good New in.: 1978 / 2000 , the machine was completely modernized for Company ALSTOM Control: conventional with Heidenhain Linear readings in 3 axes Technical details: Spindle diameter: 130 mm Spindle speed: 4.5 - 900 rpm Spindle cones: MORSE 5 ( the price of the machine will deliver free of charge adapter for ISO 50 ) X axis: 1600 mm Y axis: 1600 mm Z axis: 2500 mm W axis: 1000 mm Table: 1600 x 1400 mm Table Rotation: 360 Charging the table: 8000 kg Speed: 4.5 to 180 rpm Power range: 0.63 to 2000 mm / min Fast forward: 2 m / min Total required power: 35 kW Approximate Weight: 47000 kg EQUIPMENT: Heidenhain readings line in three axes, flat disc

Standard equipment Robust, high-quality and inclined rotation hood for easy reading of the speed LED lighting Easily adjustable and ergonomic drill depth stop Infinitely variable speed control Connection cable with plug (1,2 m) Undervoltage release Drill protection with Electr. Hedging Thermal overload protection Emergency off pushbutton Weight in kg: 30 Engine kW: 0.45 Rotary / alternating current: alternating current in V: 230V Speed 1/min: 250-3000 Drill capacity mm: 10/12 Thread cutting capacity: Max M6 -Steel Ã? 12 mm -Aluminum Ã? 20 mm -Softwood Ã? 40 mm -Drilling depth 50 mm -Throat depth 180 mm -Column diameter 50 mm -Usable table area (B x L) 180 x 260 mm -T - slot size number 2, distance 100 mm Dimensions width 12/20 mm Spindle B-16 Digital speed display Drilling depth indicator scale Drilling depth stop adjustable stop ring fast Feed by hand Steel &At ...

Drilling capacity in steel: 32 mm Drilling capacity in cast: 40 mm Cutter head milling max.: 80 mm Projection: 220 mm Spindle speed: (12) 75-3200 RPM Spindle retainer: MK 4 Quill stroke: 125 mm Table size: 800 x 240 mm Travel (x / y): 555 / 225 mm Milling head swiveling: - 90 ° to + 90 ° Distance from spindle / table: 60-485 mm Head height: 425 mm T - slot size: 14 mm S1 motor power output 100%: 1,1 / 1,5 kW (400 V) Motor power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H) : 1140 x 770 x 1500 mm Approximate weight: 287 kg without stand Features: Quick and easy change of speed using the gear selector switch Versatile application possibilities such as drilling, milling, thread cutting, … High running smoothness by polished, running in an oil bath gear gears Right - and the link run device for thread cutting Quill adjustment by means of ...

Spindle diameter 120 mm X-axis 1200 mm Y axis 1200 mm Z axis 600 mm W axis 1000 mm Table load 6000 kg

Working length: 3.200 mm Machine is equipped with: -3 drilling units from below with 3 spindle-head - 2 holders from above -1 pressure cylinder on the side The control was by the customer through a control, serial: Siemens,. newer built; replaced.

Drilling capacity in steel/GG: 23 mm spindle retainer: 2 MK projection: 300 mm table size: 300 x 300 mm Quill stroke: 100 mm spindle speeds: 190-1500 rpm drive motor: 380 V, 0.5/0.75 kW space: 410 x 670 x 1950 mm weight: 180 kg

Drilling capacity in steel/GG: 50/60 mm spindle retainer: 5 MK projection: 400 mm table size: 700 x 600 mm Quill stroke: 275 mm spindle speeds: 32-1030 rpm feeds: 4: 0.1 ? 0.4 mm drive motor: 380 V, 2.2/3.7 kW space: 700 x 1200 x 2700 mm weight: 1240 kg

Drilling capacity in steel (diameter): 60 mm projection: 2000 mm kl. / gr. Distance between Mounting surface and drill Quill: 525/1690 mm Quill stroke: 310 mm spindle mount MT: 5 table size: 1900 x 1100 mm speed: 30-1250 rpm feeds: 0.08-1.35 mm spindle drive: 5.5 kW weight: 5700 kg space requirement: 2975 x 1100 x 2950 mm

Drilling capacity: 40 mm tool holder: MK 4 speed (spindle): 90-1455 K rpm projection: 320 mm drilling table swivel: +/-50° distance spindle to table maximum: 590 mm distance spindle to base plate: 1155 mm column diameter: 120 mm table size: 505 x 425 mm worktop base plate: 360 x 370 mm motor power: 1.0 / 1.5 kW machine dimensions (W x D x H): 500 x 930 x 1870 mm weight approx.: 450 kg Accessories: - Chuck Dorn MK 4 / B 18 - coolant system - digital speed display - keyless drill Chuck 1-16 mm / B 18 - reduction sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 - halogen lamp - automatic tool ejector - protective cover

Spindle: MK 3 Dauerbohrleistung: 25 mm standard ALB ear performance: 30 mm of thread cutting performance: M 20 depth: 125 mm projection: distance 260 mm spindle/table: 90 to 840 mm table surface: 500 x 365 mm column diameter: 110 mm overall height: 1,855 mm weight: 250 kg motor pole shift bar: 0.8/1.5 kW spindle speeds continuously variable range: 80 - 1440 min-1 range: 180 - 3,200 RPM digital display for speed as standard.

Dauerbohrleistung in St 60: 15 mm standard ALB ear performance: 18 mm thread cutting performance: M 8 spindle: MK 2 drilling depth: 80 mm projection: 180 mm spindle speeds of stepless 200 - 4,000 rpm spindle speeds threads 200-700 rpm distance spindle/table: up to 380 mm tabletop: 250 x 220 mm column diameter: 65 mm total height: 910 mm weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full thread cutting device and programmable digital display

Dauerbohrleistung in St 60: 18 mm standard ALB ear performance: 20 mm thread cutting performance: M 12 spindle: MK 2 drilling depth: 100 mm projection: 225 mm from spindle/table: 55 up 880 mm table area: 450 x 315 mm column diameter: 90 mm overall height: 1,745 mm weight: 170 kg frequency-controlled three-phase motor: 1.5 kW spindle speeds continuously variable range: 100 - 2,000 rpm range: 200 - 4,000 min-1 digital display for speed as standard.

Dauerbohrleistung in St 60: 35 mm standard ALB ear power: 40 mm thread cutting performance: M 30 spindle: MK 4 feed adjustable: 20-400 mm / min drilling depth programmable: 175 mm projection: 300 mm spindle/table: 70-830 mm surface: 550 x 400 mm column diameter: 120 mm total height: 1,980 mm weight: 450 kg motor pole shift bar: 1.5 / 3.0 kW spindle speeds continuously variable range: 120-2,500 rpm spindle speeds stepless area B: 60-1,200 RPM

Accessories available. Fehlmann stage KS 240 Drilling tailstock digitized Table size 530 240 mm Route x 280 mm Y way 180 mm Speeds, electronic, adjustable with potentiometer 132-4500 RPM

Table size 430 200 mm X trail 200 mm Y way 150 mm Speeds continuously variable motor 2 speed. 132-4600 RPM Throat depth 230 mm Quill stroke 110 mm

Duration / ALB ear power 25/30 mm Thread cutting capacity Max M20 Spindle MK III Drilling depth 125 mm Throat depth 260 mm Column diameter 110 mm Usable surface [BxL] 420 x 340 mm Speed display scale Drilling depth indicator scale Drilling depth stop with fine adjustment Table height with rack and pinion Motor three-phase 400 V pole changing bar 0.90/1.45 kW Spindle speed with idle, stepless 125-4000 1 / min in 2 levels I: 125-2000 1 / min II: 250-4000 1 / min The levels change via belt apportionment Warranty: 3 years Shipping time: immediately, free loaded DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .

Speed 45-4000 RPM Fehlmann table 380 x 750 mm X/Y/Z 420/300/500 mm Motor-driven height adjustment of the drilling head

Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY < < < Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: - in chuck of faceplate 200...1100 - in open rest 400...900 - in closed rest 200...630 - in round rest 250...550 Spindle speeds range, rpm 2...200 Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx)

Pillars - or drilling machines Smoothness thanks to polished splined hubs High concentricity by hardened and ground spindle Large speed range Heavy, solid casting Drilling depth stop adjustable with millimetre scale Low maintenance gearbox with grease lubrication Electrical connection: 400 V / 3 pH 50 Hz Engine power: 1,1 / 1,5 kW Drilling capacity in steel: Diameter 28 mm Spindle retainer: MK 3 Projection/Quill stroke: 260 mm / 127 mm Spindle speeds/levels: 75 - 2900 min-1/8 Table length x width / T-slots: 376 x 394 mm / 14 mm Column diameter: 92 mm Dimensions Lxwxh: 670 x 550 x 2, 080mm Net weight: 184 kg G & pieces 3034230

-Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg

PIVOT AND DRILL FITTINGS Attacks left and right 2200 ´ mm Motor 400 V

Hardware drill Ruchser RU EBL2, 5-S Masch. No. 00664-2-96 Weight approx. 700 kg Built in 1996 L x W x H: 350 x 80 x 130 cm The machine is in good condition, ready to use. Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

-Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg

Precise, smooth-rolling standard drill, high accuracy and quality. drilling table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle In stock, available now

High quality - Low price! Radial drill MAS VR5A Arm 1600mm Max dia in steel 50mm Max dia in cast iron 60mm Max threading in steel M30 Max threading in cast iron M42 MT 4 Spindelmotor 4 kW - 28 - 2500 RPM Distance table-spindle nose 1600 mm Clamiping area 1800 x 1000 Weight 3,7 Ton

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 250 rpm up to: 2000 rpm Feeds: Voltage 50 Hz 3x: 380 Volt Spindle motor: 2 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 1200 mm Width: 1000 mm Height: 1900 mm Various accessories: Coolant system Lamp

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 415 B Technical data Drill capacity in steel: 25 mm Threat cutting in steel M: 16 Milling capacity: 100 cm3/min Taper in spindle: SF32 Spindle speeds: from: 50 rpm up to: 10000 rpm Table length: 885 mm Table width: 320 mm Distance of the T-slots: 50 mm T-channel width: 12 mm Number of T-channels: 5 Table load max.: 250 kg Height of table above floor: 1040 mm Min. distance from table to spindle: 0 mm Max. distance from table to spindle: 620 mm Longitudinal travel: 500 mm Transversal travel: 250 mm Vertical travel: 145 mm Feeds: X axis: 1 - 11000 mm/min Y axis: 1 - 11000 mm/min Z axis: 1 - 6000 mm/min W axis: 1 - 3600 mm/min Rapid traverse X: 11 m/min Rapid traverse Y: 11 m/min Rapid traverse Z: 6 m/min Voltage 50 Hz 3x: 400 Volt Power: 7 kW Total power required: 16 kW Machine´ ...

Deep hole boring machine - heavy duty deep hole boring machine Kramatorsk (Russia) KJ 1910 Year of manufacture 1986 Maximum boring diameter, mm 600 Maximum use of lenght mm 10000 (10 meters) Max 25 ton Machine in our warehouse in Northern Italy Center height over the bed, mm 670 Maximum work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000.. 10000 Work piece diameter range, mm: -in chuck of faceplate 200th.. 1100 -in open rest 400... 900 -in closed rest 200... 630 -in round rest 250... 550 Maximum work piece weight 25000 kg Range, 2 200 rpm spindle speeds Spindle diameter hole mm 700, Main motor power, kW 85 Counter rotation motor is 95kW Machine overall dimensions, mm 25550 x 3000 x 2290 Machine weight, kg 83000 Mimu machine tools (Italy) machine tools

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 310 Operating hours: 0 Technical data Drill capacity in steel: 28 mm Threat cutting in steel M: 24 Milling capacity: 100 cm3/min Spindle stroke: 160 mm Spindle speeds :stepless from: 50 rpm up to: 7100 rpm Table length: 880 mm Table width: 320 mm Min. distance from table to spindle: 0 mm Max. distance from table to spindle: 610 mm Longitudinal travel: 500 mm Transversal travel: 260 mm Vertical travel: 480 mm Feeds: X axis: 1 - 2000 mm/min Y axis: 1 - 2000 mm/min Z axis: 10 - 1200 mm/min W axis: 500 - 2000 mm/min Table load max.: 300 kg Voltage 50 Hz 3x: 400 Volt Spindle power: 7.5 kW Total power required: 10 kW Machine´s weight about: 2150 kg Overall dimensions machine: Length: 2200 mm Width: 1800 mm Height: 2400 mm Various accessories: Direct measuring system X and Y axis Di ...

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN Technical data Number of axis total: 5 Spindle nose:: SF 32 Drill capacity in steel: 30 mm Milling capacity: 100 cm3/min Spindle stroke: 180 mm Spindle speeds: from: 50 rpm up to: 9200 rpm Table length: 1230 mm Table width: 410 mm Min. distance from table to spindle: 0 mm Max. distance from table to spindle: 620 mm Longitudinal travel: 700 mm Transversal travel: 315 mm Vertical travel: 495 mm Feeds: 1 - 900 mm/min Rapid traverse:: 4 m/min Voltage 50 Hz 3x: 380 Volt Power: 16 kW Machine´s weight about: 3200 kg Overall dimensions machine: Length: 2500 mm Width: 2500 mm Height: 2450 mm Various accessories: Dividing attachment 4th axis: AT 100 CNC AC-L Coolant system Lamp

; ready for use

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 407/415 Operating hours: 39000 Technical data Spindle nose:: SF 32 Drill capacity in steel: 30 mm Threat cutting in steel M: 24 Milling capacity: 100 cm3/min Spindle stroke: 180 mm Spindle speeds: from: 50 rpm up to: 9200 rpm Table length: 1230 mm Table width: 410 mm Min. distance from table to spindle: 0 mm Max. distance from table to spindle: 620 mm Longitudinal travel: 700 mm Transversal travel: 315 mm Vertical travel: 495 mm Feeds: 1 - 900 mm/min Rapid traverse:: 4 m/min Voltage 50 Hz 3x: 380 Volt Power: 16 kW Machine´s weight about: 3200 kg Overall dimensions machine: Length: 2500 mm Width: 2500 mm Height: 2450 mm Various accessories: Dividing attachment 4th axis with teilstock 3-jaw chuck diameter: 160 mm Collet device Set of toolholders Handwheel electroinic Touch Prob ...

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 250 rpm up to: 4000 rpm Feeds: Voltage 50 Hz 3x: 380 Volt Spindle motor: 2 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 1100 mm Width: 600 mm Height: 2100 mm Various accessories: Quick change device Motorized table adjustment

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Taper in spindle: MT: 3 Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 40 rpm up to: 3600 rpm Feeds: stepless from: 0.02 mm/r up to: 0.25 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.0 / 1.5 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 1100 mm Width: 600 mm Height: 2100 mm Various accessories: Threading device Preparation for coolant device Lamp Quick change device Adjustable depth stop Digital readout number o ...

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 275 rpm up to: 3600 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 2 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 1100 mm Width: 600 mm Height: 2100 mm Various accessories: Preparation for coolant device Lamp Quick change device Digital readout number of axis:: 2 Motorized table adjustment

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Taper in spindle: MT: 3 Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 40 rpm up to: 3600 rpm Feeds: stepless from: 0.02 mm/r up to: 0.25 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.0 / 1.5 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 900 mm Width: 1000 mm Height: 1800 mm Various accessories: Threading device Preparation for coolant device Lamp Quick change device Adjustable depth stop Digital readout number o ...

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Taper in spindle: MT: 3 Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 40 rpm up to: 3600 rpm Feeds: stepless from: 0.02 mm/r up to: 0.25 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.0 / 1.5 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 900 mm Width: 1000 mm Height: 1800 mm Various accessories: Threading device Preparation for coolant device Lamp Quick change device Adjustable depth stop Digital readout number o ...