drilling and milling used for sale

bore capacity in steel (diameter): 40 mm throat: 275 mm bore stroke: 120 mm spindle taper: MK 4 turning speed range: 75 - 3200 U/min : 190 mm : 490 mm table surface area: 730 x 210 mm connected load frequency: 400 V boring feeds:: 0,1 - 0,18 - 0,26 mm/U total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25366 Specifications: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise

A horizontal boring and milling machine Scharmann is available. Spindle sleeve diameter: 120mm, travel X/Y/W: 1600mm/1600mm/600mm, speed: 1000rpm, table dimensions X/Y/Z: approx. 1200mm/1400mm, max. table load: 6000kg, column diameter: 220mm, table rotation: 360°, rapid traverse: 380mm/min, feed: 2400mm/min. Machine dimensions X/Y/Z: approx. 4500mm/2600mm/3000mm, weight: approx. 17000kg. Dokumentation vorhanden. An on-site inspection is possible.

Offered is an OptiMill MF 4V milling machine, almost new, 100h. Year of construction 2017, travel ranges X/Y/Z: 800mm/320mm/400mm, stepless spindle speed 9-6750rpm in 8 speed ranges, with electronic speed control, quill stroke: 127mm, 3-axis digital display DPA21, right/left rotation reversing switch, drilling depth stop, cross table X/Y 1244mm/230mm T-slot 16mm, chuck guard, coolant system, manual central lubrication, universal compressed-air tool clamping system ISO 40, stepless table feeds in X/Y, weight approx. 1200kg. Viewing is possible by arrangement.

Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible.

Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts.

T type milling machine TIGER TMT 5 RT - CNC SELCA 4045 - head type T30 Index 2,5°, Rotary table capacity 6.000 kg, CNC SELCA 4045, Information about technical data are not binding., Machine available subject to prior sale., Rotary table dimension: 1550x1300 mm, Maximum table load: 6.000 Kg, Cross travel x axis: 2000 mm, Vertical travel y axis: 1550 mm, Longitudinal travel w axis: 1050 mm, Working feed x-y-w axes: 0 - 60.000 mm/1, Rapid feed x-y-w axes: 12.000 mm/1, Spindle taper: 50-DIN69871, Spindle speed: 0 - 3000 rpm, Number of spindle speeds: 2, Cnc: SELCA 4045, Weight: 15.000 Kg

Technical data: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise

: neu : ca. 12 - 14 Wochen ab Auf : Spanien : 50410 € : 952.75 € : 35 mm : MK 4 : 390 mm : 94- 2.225 (16) 50 Hz 113 U/min : M35 : 1660 mm : 1510 mm : 2600 mm : 910 kg : 180 mm : 190 - 650 mm : 1310 mm : 125 mm : 400 x 420 mm : 0,10 - 0,18 - 0,24 (3) mm/min : 750 - 1.500 U/min ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE drilling and milling machine automatic feed precision electromagnetic clutches geared drive cross table fixed base and displaceable headstock control panel cooling equipment with electric motor pump hand wheel for fine tuning clamping device for tools adjustable stop drill guard OPTIONAL EQUIPMENT (PRICES ON REQUEST): Digital read out for drilling depth Tapping device Motorized longitudinal and/or transverse feed Digital read out for table axes and/or drill head height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

FEHLMANN PICOMAX 80 CNC 2/3 is a CNC Bohr- Fräsmaschine für Präzision, hohe Genauigkeit und Zuverlässigkeit. 5 Achsen; SF32; Bohren 30 mm; Gewinde M24; Fräsen 100 cm3/min. Tisch 1230×410 mm, 7 T-Nuten 12H8, Nutzlast 250 kg. Verfahrwege X700 Y315 Z170/180 W495 mm; Spindel 50–9200 t/min; Vorschub X/Y 1–9000 Z1–4000 W1–4500 mm/min; Eilgang X/Y 9 m/min Z4 m/min. Anschluss 3×380V 50Hz, 16 kW; Gewicht ~3200 kg; Maße 2500×2500×2450 mm. Zubehör: Teilapparat 4. Achse, Reitstock, 3-Backenfutter Ø160, Spannzangenaufnahme, Satz Werkzeughalter, elektronisches Handrad. Eignet sich für enge Toleranzen in Uhren, Medizin, Luftfahrt, Automotive, Werkzeugbau. Technische Daten ohne Gewähr

FEHLMANN Picomax 55 CNC ist eine CNC Bohr-Fräsmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Leistungsdaten: Bohrleistung Stahl 25 mm, Gewindeschneiden M16, Fräsleistung 100 cm3/min; Spindelaufnahme SF32; Verfahrwege L500×Q250×V145 mm; Tisch 885×320 mm, 5 T-Nuten 12 mm Abstand 50 mm, max. Tischbelastung 250 kg, Tischhöhe 1040 mm, Abstand Tisch/Spindel 0–620 mm. Technische Daten: Spindeldrehzahl 50–10000 t/min; Vorschübe X/Y 1–11000 mm/min, Z 1–6000 mm/min, W 1–3600 mm/min; Eilgang X/Y 11 m/min Z 6 m/min; Netz 3×400 V 50 Hz; Leistung 7 kW, Gesamtbedarf 16 kW; Maschinengewicht ~2400 kg; Abmessungen 1920×1850×2400 mm. Zubehör: Kühlmitteleinrichtung 100 l, Spritzschutzkabine, elektronisches Handrad. Erreicht enge Toleranzen; Einsatz in Uhrmacherei, Automotive, Luftfahrt, Medizintechnik und Maschinenbau. Technische Daten ohne Gewähr

TRAK TRM ist eine CNC Bohr-Fräsmaschine von hoher Präzision, Genauigkeit und Zuverlässigkeit. 3 Achsen, Werkzeugaufnahme SK40, Drehzahlen 70–4200 t/min. Tisch 1270×255 mm, 3 T-Nuten 16 mm, Abstand 64 mm, max. Belastung 600 kg. Verfahrwege X 800 mm, Y 450 mm, Z (Pinolenhub) 600 mm. Anschluss 50 Hz 3x 220 V. Ausgelegt für enge Toleranzen; geeignet für Automotive, Luft-/Raumfahrt, Medizintechnik und Maschinenbau. Technische Daten ohne Gewähr

FEHLMANN PICOMAX 54 ist eine CNC Bohr- Fräsmaschine, ausgelegt für Präzisionsbearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Leistung: Bohrleistung Stahl 28 mm, Gewinde M24, Fräsleistung 100 cm3/min, Spindelhub 160 mm; Tisch 880×320 mm, Abstand Tisch–Spindel 0–610 mm; Verfahrwege X 500 mm, Y 260 mm, Z 480 mm. Technische Daten: stufenlose Drehzahlen 50–7100 t/min, Spindelleistung 8 kW, Gesamtbedarf 10 kW, Anschluss 3×400 V 50 Hz; Vorschübe X/Y 1–2000 mm/min, Z 10–1200 mm/min, W 500–2000 mm/min; Gewicht ~895 kg, Abmessungen 2200×1800×2400 mm. Zubehör: Bohrfutter-Satz, Werkzeugablage, Lampe, Werkzeughalter-Satz. Erreicht enge Toleranzen, geeignet für Uhrenindustrie, Automotive, Luftfahrt, Medizintechnik und Maschinenbau. Technische Daten ohne Gewähr

PROMAC FX 381 C ist eine Bohr-/Fräsmaschine für präzise, hochgenaue und zuverlässige Bearbeitung. Tisch 660×190 mm; Bohrleistung Stahl Ø25 mm; Pinolenhub 110 mm; Verfahrwege X360 Y160 mm. Spindelaufnahme MK3; 12 Stufen 90–2150 t/min; Spindelmotor 0,75 kW; 50Hz 3×230V; Gewicht 205 kg; Abmessungen 980×880×1060 mm. Zubehör: Bohrfutter. Eignet sich für enge Toleranzen; Branchen: Automotive, Luftfahrt, Medizintechnik, Uhrenbau, Maschinenbau. Technische Daten ohne Gewähr

X-axis: 500mm, y-axis: 430mm, z-axis: 400mm, table dimensions: 510x450x410mm, max. table load: 250kg, angular clamping table: 800x390mm, feed rate x-/y-axis: 4-1600mm/min, z-axis: 4-1000mm/min, feed force: 5000N on all axes, rapid traverse x-/y-axis: 1.6m/min, z-axis: 1m/min, tool holder (DIN 2079): ISO 40, cutter drawbar thread: M16, hydromechanical tool clamping: 12,000Nm, quill stroke: 80mm, drive power: 3kW, 18-speed sliding-gear transmission: manually or automatically selectable, torque: 5Nm, spindle speed: 50-2500rpm, connected load: 6kW, control: Heidenhain TNC 114B (hand control type HS262), display resolution: 0.005mm, length: 1400mm, width: 1300mm, height: 1830mm, weight: 1.6t, space requirement: 2300x2300x2400mm, equipment: machine light, coolant tank: 18l, external coolant supply: 3bar, various tool holders, spindle tool. On-site inspection is possible.

Set including two industrial drawer cabinets sold with their contents, consisting of a large set of HSS drills, taps, reamers, milling cutters and specialized tooling for machining. The stock is organized by tool type and diameter, allowing immediate use in a mechanical workshop, CNC workshop or industrial maintenance department. The lot includes: HSS drill bits in many diameters Centering drills Step Drills Three-Lip Drills Reamers Threading and tapping tools T-slot cutters Shape milling cutters radius milling cutters Finishing cutters chamfering machines and countersinks This package represents a complete solution for drilling, boring, milling and tapping operations. Ideal for: CNC workshops Precision mechanics Industrial maintenance Mechanical manufacturing Technical schools Industrial subcontracting Auction-ID: A1-48554-57

bore capacity in steel (diameter): 20 mm x-travel: 240 mm y-travel: 160 mm table-size: 430 x 240 mm spindle taper MT: 2 spindle turning speed - stepless: 200 - 3600 U/min quill stroke: 75 mm voltage: 400 V total power requirement: 0,7 / 1,3 kW weight of the machine ca.: 220 kg dimensions of the machine ca.: 0,60 x 0,85 x 1,65 m ! ATTENTION ! EXCELLENT CONDITION ! This machine comes from a vocational school! - Serial No.: 187426 - Stepless speed adjustment - Digital speed display - Cross table - Collet chuck - Mounted on a base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 250 mm bore stroke: 125 mm spindle taper: MK 4 spindle turning speed range: 50 - 2500 U/min : 550 mm : 230 mm table surface area: 820 x 240 mm connected load frequency: 400 V total power requirement: 0,8 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,2 x 1,0 x 1,85 m Drilling and milling machine - Digital display - Clockwise/counter-clockwise rotation - 2 electric speed ranges - Drilling spindle with automatic feed and manual feed - Includes machine stand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter):5 - 30 mm x-travel:450 mm y-travel:380 mm total power requirement:1,4 / 2,2 kW weight of the machine ca.:1.100 kg dimensions of the machine ca.:1.000 x 1.400 x 2.900 mm gear box:85 - 2.000 U/min spindle diameter:72 mm bore depth:700 mm throat:300 mm spindle taper MT:3 T-slots:3 x 16/25 mm table-size:700 x 300 mm spindle turning speed range:85/170/250/355/475/710/1000/2000 U/min motor speeds::705/1425 Year:ca. 1975

S. No.: 238828

for sale NEW - ALDURO Drilling-Milling Machine BFM 20V2 Drilling capacity up to 20 mm Spindle Holder MK 2 Head swivels +/- 90° Stepless speed adjustment 50 - 2250 rpm Cross table 500 x 180 mm Digital X-travel 195 mm Y-travel 140 mm Motor 1.1 kW, 230 V Machine without base (base), Can be purchased separately Weight approx. 113 kg further models and inquiries to FSA Maschinen AG

Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

Quick-opening milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000speed max. 15000 rpm at 70% EDratio ratio 1:5Power transmission up to approx. 2.5 kWProduct dimension 110 mm (machine spindle to clamping nutTool holder MK4 with tightening thread M16Collets type OZ16 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mmWeight 6.5 kgGood condition; used

ARBOGA UM 3508 Drilling-Milling Machine -Operating voltage: 380 - 415 V -Connection: 1.5 kW -Speed: up to 1400 rpm -Rated current: 5.7 A -Speed: from 70 to 2590 rpm -Drilling depth: up to 170 mm -Table dimensions: 650 x 270 mm -with three grooves -Incl. three-axis digital display from the manufacturer HEIDENHAIN also an attached vice, jaw width: 85 mm and a matching dividing head Dimensions: LxWxH 1.2x1.1x1.9 meters / Weight 700Kg

Working length: 3.200 mm Machine is equipped with: -3 drilling units from below with 3 spindle-head - 2 holders from above -1 pressure cylinder on the side The control was by the customer through a control, serial: Siemens,. newer built; replaced.

Spindle speed continuously variable electronically 40-4000 RPM Thread cutting capacity max M8 Thread-cutting depth digital depth display digital speed display digital drill depth indicator Drilling depth stop on stop ring Feed / hand Table height with rack and pinion Duration / standard ALB ear performance steel Ã? 13 mm / 15 mm Depth 60 mm Projection 225 mm Column diameter 60 mm Usable table area (B x L) 330 x 250 mm Machine dimensions (W x D x H) 420 x 450 x 860 mm Engine dimensions (with VP) (W x D x H) 452 x 700 x 1130 mm Weight 62 kg max distance spindle/table/stand 300/ 360 mm Motor alternating current with frequency inverter 230 V, 0,54 kW Warranty: 3 years Free House including packaging (Germany only)

Standard equipment Robust, high-quality and inclined rotation hood for easy reading of the speed LED lighting Easily adjustable and ergonomic drill depth stop Infinitely variable speed control Connection cable with plug (1,2 m) Undervoltage release Drill protection with Electr. Hedging Thermal overload protection Emergency off pushbutton Weight in kg: 30 Engine kW: 0.45 Rotary / alternating current: alternating current in V: 230V Speed 1/min: 250-3000 Drill capacity mm: 10/12 Thread cutting capacity: Max M6 -Steel Ã? 12 mm -Aluminum Ã? 20 mm -Softwood Ã? 40 mm -Drilling depth 50 mm -Throat depth 180 mm -Column diameter 50 mm -Usable table area (B x L) 180 x 260 mm -T - slot size number 2, distance 100 mm Dimensions width 12/20 mm Spindle B-16 Digital speed display Drilling depth indicator scale Drilling depth stop adjustable stop ring fast Feed by hand Steel &At ...

Number of vertical independent spindles: 9 Number of horizontal spindles on axis X : (2+2) Number of horizontal spindle on axis Y: (1+1) N° 1 saw blade unit: (ø 100 mm) Router head 3,6 Kw ISO 30 - 12000/24000 rpm Max. thickness of the panel: 50 mm Control: Full Parametric Max weight of the panel: Kg 25 Max panel size: X ,Y 1100, Z 50 mm Min panel size: X 270,Y 150 (70 op.), Z 12mm Number of controlled axes: 3 Panel feeding speed: 25m/min Spindles speed rotation: 3600 rpm Saw blade speed rotation: 7000 rpm Air pressure: 7 bar Diameter of the dust extraction: ø 140 mm Exhaust air consuntion: (2000 mc/ora) - (30 m/s) Max drilling depth in horiz. on X and Y axis: 30 mm Max drilling depth in vertical: 45 mm Max horizontal diameter of the tools: 12 mm Max vertical diameter of the tools: 35 mm Motor power: 1,5 kw Max air consumption: 60 Nlt./min. Total power : 6,4 Kw  ...

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (length / width): 4800 x 1600 x 2400 mm weight: 1500 kg Götzinger Power Drill Type BF 297 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. M ...

Bore diameter: , Number of heads horizontal: , Number of heads vertical: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 0 nein boring of olive 1=yes, 0=no: 1 ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm  ...

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 boring of olive 1=yes, 0=no: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: , mm Number of heads horizontal: , St. Number of heads vertical: , St. SPINAMATIC mod. GLF-HP Dübeleintreibgerät mit Leimangabe für Fensterfertigung ---------------------------------------------------------------- komplett wie folgt : - Fahrbare Ausführung - Dübelzuführung zur Pistole wird durch SPS-Steuerung gesteuert. - 1 Wendelförderer zur Aufnahme von Dübeln mit 1 Zuführung - Leimanlage ist mit Hoch-Druckpumpe 10:1 und Sonderleimspritzdüse für Dickleim (Typ D3 oder D4-Einkomponent) augerüstet - pneumatische Pistole für Dickleim- und Dübeleinsetzen mit Ausrüstungen für nur einen Dübeldurchmesser nach Wahl zwischen : 6 - 8 – 10 oder 12 mm. Dübellänge : min. 25 mm. – max. 60 mm. Tiefeinsetzen = 30 mm. Der Leim wird durch eine Sonderleimspritzdüse, die mit SPS-Steuerung für elektronische Dosierung in Verbindung ist, gespritzt . - Flexibler Arm mit  ...

Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

High precision drilling and milling machine Aciera 22 VA Good condition from school operations Year of construction approx. 1990 Table 600 x 320 mm Speed 40 - 3600 rpm Speed setting rpm 4 automatic feeds 40-280 80-560 275-1800 550-3600 Spindle diameter 65 mm Drilling spindle stroke 120 mm Spindle holder: Aciera quick-change system Automatic thread cutting Drilling capacity in solid material 25mm Max drilling capacity up to 30mm Height adjustment via hand crank Motor: 1.1 KW Lamp Some quick-change shots Dimension WxDxH 90 x 130 x 185 cm Weight approx. 800 kg Technical information subject to reservation

I sell a Top Dubel drill multi-spindle drill Detel M-13, built in 2007. 3-spindle See good condition. Available the same.

Multi-stand drill Prior sale reserved - errors possible Internal Reference Number: D-1143-1

I sell an Angular drill with hanging insert suitable for tur production. MARZANI MACCHINE CHEAP WORK Year of construction: 1993 Number of drilling spindle 1 (drill head fully -7 to +90° adjustable) Number of insert heads 1 (magazine suitable for turret hanging) Insert head mechanical, screw insert Very good condition. Available the same.

I sell a drill with cutting units COMEC FM0V8 2000, built in 1997. Working width max. 2000mm Configuration: 0 motors from below 1+1 motors from sides / angular adjustable 2 motors from behind / head angular adjustable 3 motors from above / head angular adjustable 4 pieces of material prints from above 2 cut saws from above / head angular adjustable Atypical 5-spindle drill heads Including 3 x 15mm / 2 x 25mm. Dubel heads in the price. Very good addition. Available the same.

bore diameter: 50 mm throat: 3000 mm workpiece height: max. 200 mm total power requirement: 75 kW weight of the machine ca.: 27 t dimensions of the machine ca.: m Brand: CMA Type: GRD50 CNZ 13030 Year of make: 2010 Capacity: 50 mm X: 3.000 mm Y: 13.000 mm Z: 400 mm Spindle taper: N: 3.000 Power : 75 kW Speed: 3.000 RPM Machine weight: 27.000 kg Tap capacity: M30 Drilling depth: 150-200 mm Bed: 13,000 x 3,000 mm Max. workpiece weight: 1,500 kg /m2 Tool changer: 12 pieces External spindle cooling Chip conveyor Can be seen working at a external location The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (L/W/H): 6100x1500x2300 mm Weight: 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Hori ...

SPECIFICATIONS: Automatic drilling and dowel insertion machine with horizontal loading and unloading system, consisting of: Loader: ESSEDUE CNC transverse drilling machine: Biesse FTT Year of construction 2003 4 upper drill heads with automatic change of vertical drills 2 X-axes 4 Y-axes 4 electrospindles with automatic tool change A total of 12 slots for tool changes Inline transverse plate turner for double-sided drilling CNC transverse drilling machine: Biesse FTT Year of construction 2004 2 upper drill heads with automatic change of vertical drills 1 X-axis 2 Y-axes Biesse FHT Transversal Drilling and Dowel Insertion Machine Year of construction 2004 High pressure bonding system: Csnpgoz93 5 + 5 injectors Large vibrating baskets with dowels ESSEDUE unloader with additional transverse outlet for individual panels

Hardware drilling and recessing machine, with multi-spindle head Table mounted Motor 1,1 kW Fence left and right, 1,5 m. long

SPECIFICATIONS: Workpiece length mm: 200 - 3000 Width of the workpiece mm: 20 - 200 Workpiece thickness mm: 30 - 120 Fence length right mm: 1500 HORIZONTAL DRILLING: Drill bit diameter mm: 8 Drilling depth mm: 60 Dowel size mm: 8 x 80 with glue addition Installed power kW: 6 Uses HN - HSS Drill Bits

Bore diameter: variabel mm Number of heads horizontal: 1 St. Number of heads vertical: 0 St. 1 Götzinger dowel gluing and insertion machine BLE With the BLE, the workpieces are glued and dowelled on the front. Optional the BLE can be upgraded with a drilling unit, counter milling unit and longitudinal stop will. A 10 touch panel allows easy operation for manual or online operation. Base frame: in a compact design, covered with sheet metal Table support approx. 800 x 200 mm position 1 ---------------------- 1 glue station full jet valve Glue quantity precisely adjustable Glue gun for counter hole gluing position 2 ---------------------- 1 stainless steel glue pump, high-pressure pump and glue hose item 3 ---------------------- 1 press-in station with dowel separation and press-in cylinder item 4 ---------------------- 1 oscillating conveyor for dowels d 8 x 50 mm with feed hose into the  ...

Drilling- cutting machine Brand: Comec Type: FIMOV new machine IDEAL MACHINE FOR NARROW PART MACHINING IN THE FURNITURE SECTOR Machine can be combined with drilling units from several sides, Sawing unit for cutting the workpiece to length, optionally inclinable With magazine and automatic workpiece transport to the operator

Inv. Num. : 8262 Type: PR 99-20 Producer: Cobalm Created: 2011 Parameters: Axis X: 3400 mm Axis Y: 1900 mm Axis Z: 280 mm Cutting thickness: 200 mm

Manufacturer: Koch , Type: SBD-B, Control: Siemens, Min.-max. working length in mm: 250-2500, Working width min-max mm: 10-150, Min.-max. workpiece thickness in mm: 10-60, Drilling support horizontal: 2, Drill gearings: 6, Drill gearings: 6, Drill support from top: 4, Drill gearings: 6, Drilling engine kW: ca.1,5, Working range max mm: 60, Dovel lenght mm: 10 X 30, Number of doveling tools: 4, Glue high-pressure pump: yes, Glue quantity setting: yes, Dowels horizontal: yes, FREE TEXT: mitMagazin und Rückführung der Werkstücke,

Manufacturer: Hoffmann, Type: DEA, Year: ca.2000, Dovel lenght mm: 8 X 30, Number of doveling tools: 1, Glue high-pressure pump: Niederdruckbehälter, Glue quantity setting: yes, Dübeln horizontal: yes, Beleimwerkzeuge: 1, Dovel insertion: yes, Dübelgrösse mm: 8 X 30, FREE TEXT: Maschine wird gereingt und geprüft vor Auslieferung, Year :ca.2000