drill rig used for sale

Transnorm curved belt conveyor right bend 45°-800-700 IR1600 RA2435 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 45° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 1600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71S4/MM05/LN Electrical Data: 380-500 V, 0,55 kW Conveying speed: Frequency converter for stepless speed control Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: very good (used) Nominal / inner radius in mm: 1600 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 45° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: freely adju ...

Used bread roll line with proofer EBERHARDT, type: Primo-Star / Vario-Star -In bakery condition- For Kaiserbrötchen, Kärtner Brötchen and Sternbrötchen - Primo-Star head machine - Proofer Vario-Star - Workflow from left to right - Weight range: 20 - 85g - Incl. spare engine - Double fermentation carriers - with flour Visits and test runs are possible by arrangement.

AUTOMATIC SCREENCHANGER, number of screens: 2, total filter area: 1.342 cm2 cleaned by 6 scrapers, for the separation of soft contaminants such as paper, wood, aluminium, copper, foreign polymers, etc. from contaminated plastic melt., For rigid and soft PP max 30 MFI gr/10, 1.400 kg/h max moisture 3%, screening at 250 my., Scraper disc and scraper ensure remarkable efficiency thanks to their innovative geometry and the directly connected discharge channels. Contaminants are lifted from the screen immediately and forwarded to the coaxial discharge screw. The contaminants are removed under control and with a minimum of melt via this optimised discharge system., The scraper and discharge screw speeds are controlled fully automatically., - fast removal of contaminants through self-cleaning filter system with rotating scraper for screen cleaning, - high separation capacity and lowest melt los ...

Transnorm belt curve conveyor right GKF 90°-810-600 IR600 RA1804 Technical data: Type designation: Belt curve conveyor TS 1500-100 Frame width (NB): 810 mm belt width (GuB): 600 mm height (BH): 330 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees support feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: KT58 Year of construction: 1990 Optionally available: Supports Side guide one and both sides Frequency converter for stepless speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 1990 condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 810 Belt width in mm: 600 angle: 90° Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 scope of delivery: without supports and side guid ...

Transnorm spiral helix belt curve conveyor right 90°-750-650 IR1200 RA2437 Technical data: Frame width (NB): 750 mm belt width (GuB): 650 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees decline: 200 mm / 90° = 800 mm / 360° support feet: optionally available Conveying speed (v m/s): 0,35-1,21 Drive: SEW gear motor with movi-mot frequency converter for stepless speedcontroll Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive angle: 90° scope of delivery: including Movimot frequency converter KW: 0,55/S1 Construction year: 2001 B ...

Width 76 cm Year of construction 2009 Mobile stacking delivery for marking-free laying Banding display with max. 3 panels Vibrating device Pressing station max. infeed width 760 mm - 1 panel max. infeed width 235 mm - 3 panels Small format device for stacking height 3 - 20 mm Output up to 600 stacks / h Steel / HD - Interface / Interface Price on request. Worldwide delivery & installation.

Dematic roller curve right 90°-500-440 IR795 RA2462 Make: Dematic Running direction: 90° right running Roller width (RB): 440 mm conical, plastic coating Nominal/outer width (NB): 500 mm Inner radius (IR): 795 mm 3x 300-500V Height frame: 132 Height including motor: 275 Gear motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveyor speed: 0.6 m/s Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Drive type: Round belt Construction year: 2005 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and i ...

Carsoe Group Anytray Buffer 1500 – Pneumatic Tray Buffer System, Manufacturer: Carsoe, Model: Anytray Buffer 1500 LLANONE Right Pneumatic, Year of manufacture: 2022, Machine type: Tray buffer / product accumulation system, Description, The Carsoe Anytray Buffer 1500 is a pneumatic tray buffering system designed to temporarily accumulate and manage trays within automated food processing and packaging lines. The system helps stabilize product flow and prevents interruptions between processing machines., Built with hygienic stainless steel construction, the unit is suitable for demanding food production environments, especially in seafood and protein processing facilities., Technical Specifications, - Manufacturer: Carsoe, - Model: Anytray Buffer 1500 LLANONE Right Pneumatic, - Year: 2022, - Power: 0.46 kW, - Supply voltage: 230 VAC + N + PE, - Frequency: 50 Hz, - Air pressure: 6 bar, - M ...

Standing sheet delivery GUK KS 430; cleaned and tested; Working width 430mm; Preparation for foosball; suitable for connection to GUK folding machines. Smal fold vertical stacker GUK KS 430; cleaned and checked; working width 430mm; control system for kicker; used for GUK folding machines.

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis from electric forklift EVS 25/14 -Transmission: ZF Gotha HFP 50 -Wheels: Ø 370 x 190 mm -Individual components: see photos -Price/Sale: complete -Dimensions: 860/400/H500 mm -Total weight: 364 kg

Checked and cleaned Good working conditions

Right-angle gearboxes Demag WUK60TD Type B14.2-50-2-69.3 with electric motor type ZBA 100 AL 2.2kW with drive and steel construction. New, from stock.

Metal circular saw – 380 V – 2 speeds – with cooling pump and additional saw blades Solid industrial metal sawing machine, presumably of Italian origin, equipped with a saw blade with a diameter of approx. 295 mm. The machine is equipped with a powerful 2-speed drive, an integrated cooling pump for cutting metal and a sturdy work table with material clamp. The machine includes indications of ADIGE / Fratelli Rigon. Technical data: • Type: Metal circular saw machine • Italian version • Saw blade: approx. Ø 295 mm • Power supply: 380 V • 2 speeds • Equipped with cooling pump • Sturdy metal construction • Machine dimensions: approx. 100 × 75 × 140 cm (L × W × H) • Includes 4 extra saw blades Auction-ID: A3-46152-11982

Ford Transit 350 2.0 EcoBlue 130 hp rigid – 2021 – 94,918 km Specifications: Brand: Ford Model/Type: Transit 350 Registration date: 17-05-2021 Mileage: 94.918 km VIN: WF0AXXTTRAMC78826 Fuel: diesel Engine: 2.0 EcoBlue turbodiesel Displacement: 1,995 cc Number of cylinders: 4 Power: 96 kW / 130 hp Transmission: 6-speed manual Emission class: Euro 6 Number of seats: 3 Wheelbase: 3,954 mm Maximum permissible mass: 3,500 kg Mass in running order according to registration: 2,316 kg Tyre Size: 235/65 R16C Superstructure: Blyss Transporttechnik closed body Year of construction: 2019 Serial number superstructure: WB2K00061 Interior dimensions of cargo space: approx. 4,180 × 2,120 × 2,100 mm (L×W×H) Loading volume: approx. 18.6 m³ Permissible stacker/forklift axle load on load floor: 700 kg Features: Air conditioning Cruise control Electric windows Elec ...

The chassis is based on a torsion axle from a renowned manufacturer and is equipped with independent torsion suspension. Tyres in size 155/70 R13 are used. The trailer has a tilting V-drawbar, which provides excellent stability while driving. The base is made up of curved profiles of galvanized sheet steel that are bolted together. Auction-ID: A3-46150-17615

Opel Movano 2.3 CDTI 170 hp curtainsider rigid – 2019 – 330,241 km Specifications: Brand/type: Opel Movano Registration date: 02-04-2019 Year of manufacture: 2018 Mileage: 330.241 km VIN: W0VVSL608KB169141 Fuel: diesel Engine: 2.3 CDTI 4-cylinder turbo diesel engine Displacement: 2,299 cc Power: 125 kW / approx. 170 hp Transmission: 6-speed manual gearbox Emission class: Euro 6 Seats: 3 Maximum permissible mass: 3,500 kg Mass according to registration: 2,600 kg Calculated payload: approx. 900 kg Maximum front axle load: 1,850 kg Maximum rear axle load: 2,100 kg Wheelbase: 4,332 mm Overall dimensions according to vehicle document: 7,294 × 2,200 × 3,100 mm Interior dimensions of cargo space: approx. 5,250 × 2,100 × 2,150 mm (L × W × H) Loading area: approx. 11.0 m² Calculated loading volume: approx. 23.7 m³ Tyre size: 225/65 R16C Features: Curt ...

Capacity: 55 L Quantity: 100 pots Construction: black rigid plastic Notes: reinforced and perforated bottom for drainage. Auction-ID: A1-49609-33

Capacity: 4 L Quantity: 300 units Construction: Black rigid plastic Notes: Perforated bottom for drainage. Auction-ID: A1-49609-29

New unbraked double-axle trailer with haulm nets from BW Trailers / dimensions 300x130x100 / comes with certificate of conformity and 2 years warranty / hot-dip galvanized chassis / alko axles / galvanized haulm net Auction-ID: A3-46155-6493

Table, Drilling and Tapping Machine FLOTT Type TBZ 15 GLFabr. No. 32177027 year of construction 1986Drilling capacity 15 mmSpindle mount MK2Throat depth 195 mmPine stroke 80 mmTable size 275 x 200 mmColumn diameter 70 mmSpindle speed 80 - 4500 rpm. 18 stepsMotor power 0.55 + 0.75 kWNet connection 380 volts, 50 Hz- 6 belt steps from the motor and 2 belt stages to the drilling spindle 2 motor speeds- 3 pieces guide cartridges 0.7mm + 0.8mm and 28G available- Drill head height adjustment via crank with rack on the

Drill Bit Grinding Machine GÜHRING Type SS 15Fabr. No. 909 Year of construction approx. 1977Drill diameter max. 40 mmGrinding wheel diameter right 300 mmGrinding wheel diameter left 250 mmGrinding wheel width 40 mmGrinding spindle speed approx. 2800 rpmMotor power approx. 2.2 kWNet connection 380 volts, 50 Hz- tip angle infinitely adjustable- Sharpening device- Gear motor for height oscillation in front of the cup wheel- Diamond dressing holder- Various drill holders-

Magnetic Drilling Machine, Magnetic Drilling MachineCore Hole Drilling Machine, Metal Core Hole Drilling MachineDR. BENDER Type EK 323Masch No. 180543 year of construction approx. 1988Drilling capacity 23 mmSpindle holder MK 2Spindle speed 160 / 400 / 1250 rpm. Magnet 215 x 105 mmDrilling unit 220 Volt, 50 Hz, 1025 WattE-Magnet 220 Volt, 50 Hz, 65 Watt- Spindle speed via 3 gear stages- Left and right rotation- E-magnet KOCH, type KL32/6- Drill head height adjustment guided in a linear guide- Manual expulsor- Drill stand on

Radial drilling machine WEBO type R4bRFabr. No. 15 / E195 Year of construction approx. 1965Drilling capacity 40 mmThroat: approx. 1250 mmSpindle holder: MK 4Spindle speed: 30 - 1325 rpm. 9 stepsFeed from 0.12 - 2 mm/rev. 9 steps; used

Column Drill ALZMETALL Type AB 4 SVMasch. No. 14805 Year of construction approx. 1980Drilling capacity 40 mmSpindle holder MK 4 - Short quillThroat projection 340 mmQuill stroke 180 mmTable size 710 x 560 mmColumn diameter 160 mmSpindle speed 30 - 765 rpm. infinitely variableMotor power 2.3 and 3.4 kW pole-switchableMains connection 380 volts, 50 Hz- Spindle speed over 2 motor speeds and infinitely variable gear- Gears with 2 gear stages for high torque at low speeds- Spindle on/off via

Column drilling machine GOTHABear power 30 mmSpindle holder MK 3 - long quill, throat depth 350 mmPine stroke 200 mmTable size 460 mmSpindle speed 160 - 750 rpm. 4 stepsFeed rate 0.1 - 0.2 - 0.3 mm/COLUMN diameter 160 mmMotor power 2.2 kWNerg connection 380 volts, 50 Hz- Spindle speed via 4 gear stages- Automatic feed- Rotatable drilling table with mechanical clamping- Table height adjustment via hand crank- Clamping surface at the machine foot 450 x 450 mmSpace required L x W x H 700

Column drill INFRATIREA - ORADEA type PH - 031Series. No. 02434 Year of construction 1975Drilling capacity 40 mmSpindle holder MK 4 - short quillThroat depth 320 mmQuill stroke 250 mmTable size 400 x 400 mmColumn diameter 160 mmSpindle speed 85 - 1500 rpm. 6 gear stagesMotor power 2.2 kWNet connection 400 volts, 50 Hz- Spindle speed via 6 gear stages- Clockwise and counterclockwise rotation- Automatic feed 0.10 - 0.16 - 0.25 - 0.4 mm/U- Drilling table swivelling- Table height adjustment via

Used Radial Drilling Machine DONAU Donauflex 145 Year of Make: 2006 Only a few hours of operation. • Drilling capacity in steel 45 mm • Boom travel 1,050 mm • Drilling radius min. 540 mm / max. 1,590 mm • Spindle speed 15 - 2,800 rpm • Tapping device • Tool holder MK 4 • Hydraulic clamping for boom and lifting column • Electromagnetic feed clutch • Machine light

Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg

Large set of HSS drill bits and drilling tooling including precision drill bits, Morse taper drills, centering drills and machining accessories. This set is ideal for general mechanics workshops, CNC workshops, industrial maintenance or technical schools wishing to supplement their stock of tools. The bundle covers a wide range of applications: Steel drilling Precision drilling Centering Conventional machining Industrial maintenance Mechanical manufacturing The presence of many Morse taper drills and large diameters represents an important value for any workshop equipped with drill presses or conventional machine tools. Auction-ID: A1-48554-58

Instruction Manual Auction-ID: A1-48552-29

Unused, handbook available Auction-ID: A1-40397-76

HBM Drill Sharpener, Drill Grinder From 3 to 13 mm In just three simple steps, you can ensure that blunt, worn drills are extremely sharp again. The grindstone at the drill grinder consists of diamond and is therefore extremely hard. That way you always achieve the desired results quickly. You can be sure of a good result, especially with HSS drills. In this way, this device is perfect for use in industrial workshops. Furthermore, the sharpener is suitable for use on just about any type of drill. So it is a flexible tool. Auction-ID: A1-40897-78

Benson 101-piece cobalt drill set 101 piece cobalt drill set (3x) Auction-ID: A1-40897-51

Stand drilling machine in row arrangement, used Gang drilling machine, used Type: BT 6.52 Manufacturer / make: Steinel Built/ new in: 1978 Drilling capacity / drilling capacity: 6 mm in St 60 Spindle cone/ spindle taper: MK 1 Drilling spindle discharge / distance center drill spindle to column: 204 mm Drilling stroke/ way of spindle: 90 mm Table clamping area/ table size: 800 x 390 mm Column diameter/ diam. of coulmn: 60 mm Drilling spindle speeds / speeds of drilling spindle: 1400 / 2800 / 5600 per min/ per minute Total connection value / rated power: 0.25 kW each => 1 kW Weight / weight: approx. 0.4 t

Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!

Spindle speed continuously variable electronically 40-4000 RPM Thread cutting capacity max M8 Thread-cutting depth digital depth display digital speed display digital drill depth indicator Drilling depth stop on stop ring Feed / hand Table height with rack and pinion Duration / standard ALB ear performance steel Ã? 13 mm / 15 mm Depth 60 mm Projection 225 mm Column diameter 60 mm Usable table area (B x L) 330 x 250 mm Machine dimensions (W x D x H) 420 x 450 x 860 mm Engine dimensions (with VP) (W x D x H) 452 x 700 x 1130 mm Weight 62 kg max distance spindle/table/stand 300/ 360 mm Motor alternating current with frequency inverter 230 V, 0,54 kW Warranty: 3 years Free House including packaging (Germany only)

SAW CARRIAGE DISTANCE: 610-710 MM, RANGE OF CUTTING: HEIGHT: 200 MM, WIDTH: 200 MM, DRILL DIA.: 12 - 40 MM; STROKE: 630 MM;

Working length: 3.200 mm Machine is equipped with: -3 drilling units from below with 3 spindle-head - 2 holders from above -1 pressure cylinder on the side The control was by the customer through a control, serial: Siemens,. newer built; replaced.

Standard equipment Robust, high-quality and inclined rotation hood for easy reading of the speed LED lighting Easily adjustable and ergonomic drill depth stop Infinitely variable speed control Connection cable with plug (1,2 m) Undervoltage release Drill protection with Electr. Hedging Thermal overload protection Emergency off pushbutton Weight in kg: 30 Engine kW: 0.45 Rotary / alternating current: alternating current in V: 230V Speed 1/min: 250-3000 Drill capacity mm: 10/12 Thread cutting capacity: Max M6 -Steel Ã? 12 mm -Aluminum Ã? 20 mm -Softwood Ã? 40 mm -Drilling depth 50 mm -Throat depth 180 mm -Column diameter 50 mm -Usable table area (B x L) 180 x 260 mm -T - slot size number 2, distance 100 mm Dimensions width 12/20 mm Spindle B-16 Digital speed display Drilling depth indicator scale Drilling depth stop adjustable stop ring fast Feed by hand Steel &At ...

Drilling capacity in steel/GG: 23 mm spindle retainer: 2 MK projection: 300 mm table size: 300 x 300 mm Quill stroke: 100 mm spindle speeds: 190-1500 rpm drive motor: 380 V, 0.5/0.75 kW space: 410 x 670 x 1950 mm weight: 180 kg