drill grinder used for sale

PETECH WEW5050 pillar drill is designed for precise drilling of holes with a maximum diameter of 50 mm. Machining is performed by means of a work head with a reliable spindle. The work table with adjustable height and rotation around the column allows for convenient positioning of the workpiece and adjustment of the working position. The workspace is illuminated by a lamp mounted on the body of the PETECH WEW5050 machine. Technical specifications of the PETECH WEW5050 column drill press - maximum drilling diameter: 50 mm - workspace illumination

Danube DR 23 - High Radial Drilling Machine -Drilling capacity / steel approx. 28mm -Projection approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm -Tapping device -Hydraulic clamping -Documentation Dimensions: Hjbkn Asvw D Smeu S Tol LxWxH 2x1.7x1.9 meters / Weight 1900Kg

Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, drill bit with drill blade Ø 60.5 mm -Reamer: Type H3 52.1-65 -Recording: MK4 -Dimensions: Ø 60 x 425 mm -Weight: 2.3 kg

Alzmetall AB 3 ES - Column Drilling Machine -Drilling capacity / steel 35mm -Projection 280mm -Drilling stroke 180mm Hebkn Auevtzrvj S Tol -Recording MK 3 -Table size 600x470mm -Stepless speed regulation -Drilling depth stop -Drill chuck -Documentation Dimensions: LxWxH1.2x0.8x2.1 meters / Weight 550 kg

Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, drill bit with drill blade Ø 55.2 mm -Reamer: Type H3 52.1-65 -Recording: MK5 -Dimensions: Ø 55 x 315 mm -Weight: 2.3 kg

Collet / Gamesa - Radial drilling machine / mobile crane -Boom approx. 1200mm -Universal angle head can be adjusted in several ways -Spindle speed 95 - 750 rpm -Automatic feeds -Morse taper MK4 -Boom height adjustable approx. 1400mm -Control cabinet retrofit Dimensions: LxWxH 2x1x2.1 meters / Weight 1500Kg Hebkjvucbhon Au S Tsl

bore capacity in steel (diameter): / mm throat: / mm bore stroke: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GILLARDON GB 20 Drilling capacity in steel approx. 25mm Projection 285mm Drilling stroke 150mm Table clamping surface 400x400mm Table adjustment approx. 650mm Bnwaxdsulle Drilling depth stop Stepless speed regulation Speed display Emergency stop Work light Footswitch Dimensions LxWxH 0.8x0.6x2 meters / Weight 450Kg

column drill / GILLARDON GB 25 -Drilling capacity / steel 32mm -Drilling capacity / cast iron 35mm -Speed range - Stepless 60-1800 rpm -Direction of rotation / Right-Left -Morse taper MK 3 -Projection 290mm -Quill drilling stroke 175mm -Table surface 450x355mm -Table height adjustment by hand crank -Tapping device -Coolant device -Drill chuck -Analogue speed display -Footswitch -Emergency stop -Documentation Dimensions: LxWxH 0.7x0.7x2Meter / Weight 450Kg

Column Drill MAXION / IXION BS 25 ST - G -Well-groomed general condition -CE marking -Year of manufacture 2000 -Drilling capacity / steel 25mm -Tapping device up to M20 -Spindle holder / Morse taper MK 3 -Drilling stroke / spindle stroke 120mm -Projection 260mm -Speed range / infinitely variable 120-2160 rpm -Automatic feed - Work table size 500x365mm -Column diameter 110mm -Spacing/Spindle Table 90-760mm -Drive power 1.5 KW -Drill chuck Dimensions: LxWxH 0.8x0.5x2 meters / Weight 300Kg

DAREX AP 5000 / Precision Twist Drill - Automatic Grinding Machine -CE marking -Grinding range 1.5 - 26 mm -Suitable for standard twist drills (HSS cobalt, optional carbide) -Types of grinding - cone shell grinding as well as automatic cross grinding (split point) to reduce the cross-cutting edge -Automatic operation -Various operations Dimensions: LxWxH 0.5x0.5x0.4 meters / Weight 50Kg

ARBOGA UM 3508 Drilling-Milling Machine -Operating voltage: 380 - 415 V -Connection: 1.5 kW -Speed: up to 1400 rpm -Rated current: 5.7 A -Speed: from 70 to 2590 rpm -Drilling depth: up to 170 mm -Table dimensions: 650 x 270 mm -with three grooves -Incl. three-axis digital display from the manufacturer HEIDENHAIN also an attached vice, jaw width: 85 mm and a matching dividing head Dimensions: LxWxH 1.2x1.1x1.9 meters / Weight 700Kg

PANHANS 116 YOC 1986 Motor power: 1.5 kW 2-lever operation Max. drilling depth: 130 mm Height adjustment: 135 mm Max. slotted hole length: 240 mm Height adjustment by handwheel Dowel pitch: 16 / 22 / 25 / 32 mm Miter ruler (adjustable) Workpiece stop 1 eccentr. Workpiece clamp Line laser (Z-laser) 230V Chassis Table size: 510 x 290 mm Weight: 220 kg incl. various Gebr. Drills Dimensions (approx. dimensions): W: 90 cm T: 125 cm H: 115 cm Manufacturer information

incl. various drills, long stops on both sides and 2 support tables with ball sleeves The sale is carried out on behalf of the customer from the current location, in the condition as existing, excl. Warranty.

General Manufacturer: Alzmetall Type: AC 32/AS Year of Make: 1991 Performance Drilling capacity St 60: D32 mm, v=20 m/min, s=0.27 mm/rev Drilling capacity GG 20: D40 mm, v=20 m/min, s=0.27 mm/rev Drilling capacity St 60: D45 mm, v=20 m/min, s=0.15 mm/rev Tapping capacity St 60: M 24 Threading capacity GG 20: M 30 Drive Main drive: 3 kW – 1,500 rpm Main spindle speed range: 55 – 5,000 rpm Feed Feed drive: automatic, infinitely variable Feed speed: 1 – 3,000 mm/min Rapid traverse: 3 m/min Spindle Tool holder: MK4 Spindle head diameter: 46 mm Quill stroke: 180 mm Projection: 322 mm Column diameter: 145 mm Table Table clamping area: 415 mm x 508 mm Number of T-slots x width x spacing: 5 x 14 x 100 Table stroke: 663 mm Distance from spindle table max: 663 mm Spindle-machined base plate distance: 1,083 mm Dimensions and weight Dimensions: 720 mm  ...

bore capacity in steel (diameter): 28 mm arm length: 700 mm workpiece height max.: 1300 mm tool taper: MK3 feeds: 0,1-0,3 mm/U spindle turning speed range: 100-1.220 U/min total power requirement: 1,4 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: LBH 1,8 x 0,8 x 2,3 m Incl. cube table Incl. drilling feed Mechanical clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auerbach AX TBE 200.1Year of manuf. : 2013 ____________Description:In general:Drilling-ø (max.):3,5 mmDrilling depth (max.):200 mmDeep drilling module:Technology:DrillingspindleSpeed (max.):10.000 rpmPower:3,5 kWTaper:HSK-A40Equipment/Accessory:Chipmanagement:Chip trayCoolingmanagement:Internal cooling unit with Filter and High-pressure, 140 barWorkpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140Oilmistseparation:Electrostatic extraction, LTA AC 500Further Accessory:Misc. Single lip driller

Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex drill bits, drill bit holders -Manufacturer: Sassex, spiral drill bits, 33 pieces -Type: E16 / E17 Ø 40 to 128 mm -Submission/Price: complete -Mounting bracket: available in stock for an additional charge -Transport dimensions: 530/340/H50 mm -Weight: 15 kg

taper MK: 3 serial number: 4131 throat: 1000 mm documentation: ja clamping: hydraulisch kW weight of the machine ca.: 2,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Radial Drilling Machine KOLB KR 55 Spindle Ø 80 mm Cone CM5 Spindle exit: 400 mm Rotation: from 18 to 2000 RPM Table size: 1800 x 1000 mm Arm travel: 1250 mm Auto descent Auto rise according to the 0 setting Year of construction: 1990 Maxi distance spindle nose/table: 1500 mm Mini distance spindle nose/table: 800 mm Column diameter: Ø 315 mm Drilling/tapping function Rotation at 360° Possibility of sensory drilling Automatic gearbox Lubrification Hydraulic locking Voltage: 380 V Dimensions (L x W x H): 2900 x 1100 x 3060 mm Weight: approx 5 T

Slotted Hole Drilling Machine Holzkraft Type LLB 16 H Item No. 532 6617 Year of construction 2010 With dowel device Table size 500 mm x 200 mm Drilling width 200 mm Drilling depth 150 mm Drill head height adjustment 150 mm Wescott Drill Fiutter 0-16 mm Speed 3000 rpm. Motor power 1.1 kW Table fixed Drilling unit movable Weight 120 kg

bore capacity in steel (diameter): - mm throat: - mm bore stroke: mm total power requirement: kW weight of the machine ca.: 400 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ID3812 Morath AKU D25 year/Baujahr 2007 Morath excavator-mounted drilling mast, with OQ 70/55 adapter plate (1 unit); Morath duplex rotary drive (counter-clockwise rotation on the outside, clockwise on the inside) (1 unit); HB100 hydraulic hammer (1 unit); Remote Control Station. Morath Excavator mounted mount, with adapter plate OQ 70/55, 1 pc. Duplex rotary drive Morath (outside left inside right-turning), 1 pc. Hydr. Hammer HB100, control station remote control

bore capacity in steel (diameter): 50 mm arm length: 1100 mm bore capacity in cast iron: 60 mm quill stroke: 300 mm tool taper: MK 5 speeds: 22 - 1000 U/min feeds: ja mm/U Boring motor: 4,5 kw total power requirement: 7,5 kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: 2,1 x 0,9 x 2,85 m Radial drilling machine - Box table 750 x 750 x 500 mm - Coolant system - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling Ø: 28/35 mm Spindle holder: MK 3 Projection: 293 mm Table size: 300 x 440 x 500 mm Table swivel on round column and height-adjustable via hand crank and rack Large distance between table and drill quill: 630 mm Quill stroke: 180 mm Spindle speeds adjustable in 4 groups: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.3 kW Weight: 340 kg Space requirement: 1100 x 900 x 1880 mm

Drilling Ø in steel/GG 20: 40/55 mm Spindle holder: MK 4 Projection: 345 mm Table size: 450 x 600 mm Distance between table and drill quill: 785 mm Quill stroke: 180 mm Spindle speeds in 4 groups by pole-switching. Engine and manual transmission as well as infinitely variable control: 160 - 1540 rpm 4 automatic feeds: 0.09; 0,12; 0.18 and 0.22 mm/rev Drive motor: 380 V, 2.6/3.2 kW Weight: 640 kg Space requirement: 700 x 1150 x 2000 mm

Drilling Ø: 28/35 mm Spindle holder: MK 3 Projection: 293 mm Table size: 400 x 400 mm Table swivel on round column and height-adjustable via hand crank and rack Large distance between table and drill quill: 630 mm Quill stroke: 180 mm Spindle speeds in 4 groups adjustable: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.5 kW Weight: 340 kg Space requirement: 600 x 920 x 1880 mm

Offered is a special drilling and thread-cutting machine Frielingsdorf, equipped with four Ayen drilling units. Machining directions: 3×side, 1×top, setup: rotary indexing table, speed of side drilling units: 960rpm, speed of drilling unit from above: 1400rpm, motor power per drilling unit: approx. 0.73kW, control: conventional. Machine dimensions X/Y/Z: approx. 2600mm, 1500mm, 2600mm, footprint without side lines/containers: approx. 3.5m², weight: approx. 1500kg. Inspection possible by arrangement.

Offer 24456 Technical data: - Drilling capacity in steel ST 60 approx. 60 mm - Drilling capacity boring approx. 80 mm - Thread cutting up to approx. M 40 - Drilling spindle holder MK 5 - Drilling spindle stroke 380 mm - Radius min. / max. approx. 420 / 2000 mm - Column diameter approx. 500 mm - Stroke of the boom approx. 1350 mm - Min. / max. distance: - Spindle – base plate approx. 370 - 1700 mm - Machined base plate clamping surface approx. 1100 - 2300 mm - 12 spindle speeds 19 - 1900 rpm - 9 feeds 0.09 - 0.75 m/rev - Drilling spindle drive 400 V / 10 kW - E - Central clamping - Coolant device - Space requirement approx. W 1400 x H 3400 x D 3600 mm - Weight approx. 7500 kg

Tool holder MK 4 Drilling capacity up to 40 mm steel Clockwise and counterclockwise rotation Stepless speed adjustment with display Automatic feed

A conventional Gillardon multi-spindle drilling machine is available. Drilling units: 4, spindles: 4, drilling capacity in steel: 25mm, tapping capacity: M20, drilling stroke: 150mm, speed: 3000rpm/1400rpm. An on-site inspection is possible.

: 40 mm : M 24 : M 30 spindle turning speed - stepless: 160-2250 U/min : MK 3 spindle stroke: 120 mm throat: 293 mm column diameter: 115 mm : 515x360 mm distance spindle /table: min./max. 117/701 mm : 2 x 14 x 224 mm feed: 0,1 + 0,2 mm/U Machine height: 1840 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling Ø: 28/35 mm Spindle holder: MK 3 Projection: 293 mm Table size: 400 x 400 mm Table swivel on round column and height-adjustable via hand crank and rack Large distance between table and drill quill: 630 mm Quill stroke: 180 mm Spindle speeds in 4 groups adjustable: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.5 kW Weight: 340 kg Space requirement: 600 x 920 x 1880 mm

Dowel and stair drilling machine GÖTZINGER RBS swivel with laser very good condition, the machine has been used very little and is as good as new, it comes from an educational institution it can be used to drill dowel holes and similar things the machine has a drill head type BKF-5 with 5 drill bits M10 female thread, the distance between the drill bits horizontally is 32mm, vertically it is 25mm the whole drill head can be swivelled 360° with degree display and different grids, a normal 2-jaw chuck can also be used You also get 3 drill bit holders, for drills with a cylindrical shank of 12 or 16mm, and for drills with an M10 external thread the machine table is 1100mm wide and 250mm deep, there is a stop at the front that can be lowered if necessary for the production of dowel connections there are 2 adjustable angle stops on the machine table, which can be adjusted with an  ...

Drill press, drill press, stand drill, pillar drill -Manufacturer: WMW, column drilling machine type CM 10S/55 -Motor: 630 W -Speeds: 460 - 2190 rpm -Translation: via V-belt -Table size: 220 x 280 mm -spindle taper: MK1 -Spindle stroke: 70 mm -Projection: 200 mm -Pillar Ø: 85 mm -Dimensions: 400/800/H1670 mm -Weight 206 kg

little used 1-head drill from Nagel

4 - Head Paper Drilling Machine.

2 head paper drill. Massiv on stand.

This 3-axis M+A RB 63/20 W drilling machine was manufactured in 2014. It features a maximum drilling diameter of 63 mm in steel and 80 mm in cast iron, with a maximum reach from the column of 2000 mm. The machine includes a robust cube table measuring 800 x 630 x 500 mm. If you are looking to get high-quality drilling capabilities, consider the M+A RB 63/20 W machine we have for sale. Contact us for further details.

TECHNICAL DATA: Processing dimensions: max. 1000 x 300 x 70 mm Horizontal Spindles: 5 + 1 Horizontal drill speed: 4500/9000 rpm Horizontal drill bit holder: Ø 16 mm Saw: Ø 130 mm Installed power: 10 kW

TECHNICAL DATA: 02 Drilling spindles (1 HP each) 01 6-spindle mortising unit (2 HP) 02 Workpiece holding piston

x-travel: 1050 mm y-travel: 800 mm z-travel: 560 mm Control: HEIDENHAIN iTNC 530 Tools changer: 30 pos. table-size: 950 mm turning speeds: 28000 U/min output: 55/43,5 kw taper: HSK A 63 a-axis: -10º/+110º ° c-axis: 360 ° Internal cooling system: 10 - 80 bar table load: 800 kg total power requirement: 80 kVA Total weight, approx.: 13 t dimensions of the machine ca.: 3,6 x 3,8 x 3,18 m 5-axis machining centre DMG-MORI HSC 105 linear - CNC control Heidenhain TNC 530 - Tool changer 30-fold (HSK A63) - NC rotary table 2606h Spindle Hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drilling machine, year 1990. Used machine. More info & price on IndustrialBuyer.

bore capacity in steel (diameter): 50 mm throat: 400 mm bore stroke: 250 mm taper MK: 4 MK table-size: 705 x 580 mm feeds: 0,1 - 0,2 - 0,3 - 0,4 mm/U turning speeds: 60 - 1205 U/min total power requirement: 4,0 KW weight of the machine ca.: 0,85 t dimensions: 1,2 x 0,8 x 2,55 m Column drilling machine with: - Power feed - Left/right rotation - Coolant pump - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring power: 35.0 / 40.0 mm bore capacity in cast iron: 50.0 mm threading: M 30 bore stroke: 150 mm Size of table plate: 730 x 210 mm Center of spindle to wall or column: 280 mm Speed: 80.0 - 1.400 U/min distance spindle /table: 85 - 755 mm spindle taper MT: 4 MK column diameter: 120 mm feed: 0.1 / 0.2 / 0.3 mm/U voltage: 400 V Motor output: 1.3 / 2.3 KW weight of the machine ca.: 350 kg range L-W-H: 800 x 600 x 2020 mm Original price, including accessories: approx. 20.000 euros Special price available upon request Features: - Heavy-duty, versatile column drill press - Electric table height adjustment - Cross slide 730 x 210 mm ... with digital display - Machined base plate with T-slots - Automatic spindle feed - Fixed drilling depth stop - Stepless speed adjustment - Pole-changing motor - Thread-cutting device - Quick-release drill chuck with tapered shank - User manual (PDF) The  ...

Paper drilling machine Hang 114-30-4; good condition; cleaned and tested; 4 drill heads; Drilling lubrication; Drill cooling; Speed regulation; Table lifting speed adjustable; Drilling distance 36-260mm; insertion depth 6-130mm; Insertion height max.65mm; Endless Drilling Belt; Table size 600x480mm. Paper drilling machine 114-30-4; good condition; cleaned and checked; four heads; drill cooling; lubricating device; Variable Drill Speed; table lift speed adjustable; adjustable drill offset 36-260mm; insertion depth 6-130mm; max. stack height 65mm; cardboard band under drill; table size 600x480mm.

taper MK: 5 spindle diameter: 60 mm feed: ja m/min weight of the machine ca.: 1,1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mm y-travel: 1500 mm z-axis: 3000 mm W-axis (spindle longitudinal): mm spindle diameter: 100 mm table surface area: 1.400 x 1.300 mm table load: t spindle turning speed range: U/min power capacity - milling spindle: kW tool taper: MK | dimensions: 6,4 x 3,2 x 3,4 m weight of the machine ca.: 11,0 t used table borer. - some tool holders - turntable with motor - coolant system - facing plate Ø 660 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mm y-travel: 900 mm z-axis: 800 mm W-axis (spindle longitudinal): 500 mm spindle diameter: 90 mm table surface area: 1.000 x 1.000 mm table load: 2,5 t spindle turning speed range: 8- 1600 U/min power capacity - milling spindle: 11 kW tool taper: SK 40 | control: Heidenhain TNC 407 dimensions: 4,5 x 3,25 x 3,0 m weight of the machine ca.: 8 t used table borer. retrofitted to CNC Heidenhain TNC 407 - some tool holders - turntable with motor - coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL DATA: Working dimensions: max. 1200 x 100 x 65 mm 05 Spindles with M10 right-hand thread 02 Spindle motors Complete with feeding device 03 Vertical Pressure Devices 03 Horizontal Pressure Devices Installed power: 6 kW