dreh kipptisch used for sale

Rotor Ø: 340 mm Working width: 410mm Motor power: 11-18.5 kW Rotor cutting strips: 5 Stator cutting strips: 2 Insertion opening: approx. 410 x 340 mm Capacity depending on plastic and screen size: approx. 130-400 kg/h Granulate conveyor: 1.1 kW Net weight: approx. 1640 kg Gross weight: approx. 1865 kg Box dimensions: approx. 2.2 x 1.7 x 1.6 m Feed belts with silencer Centre distance: 3700 mm Belt width: 400mm Net weight: approx. 296 kg Gross weight: approx. 430 kg Box dimensions: approx. 0.8 x 0.8 x 4.4 m - Overhaul in 2022 - Real bevel cut - Integrated sound insulation - Conveniently designed grinding room - Safe material acceptance - Optimum granulate quality - Built-in granulate conveyor system - Easy maintenance and cleaning - Tested occupational safety Ø of rotor: 340 mm Useful width: 410mm Motor output: 11-18,5 kW Rotor blades: 5 Stator blades: ...

Tape granulator BG 8, Fabr. Dreher More information and pictures on request

Description Accessories available. Technical data: Tip height 185 mm Turning diameter in the offset 450 mm Turning diameter over bed 395 mm Turning diameter over slide 220 mm Length 310 mm of offset Top width 1000 mm 20 spindle speeds or optional 22-1500 rpm. Turning length 1000 mm

Capacity 20 kN, band width 500 mm, coil inner diameter 445-530 mm Coil outer diameter 1300-1400 mm Drive power 1.1 kW Rolling speed 16 U/min Manual spreading of the reel Crown with hydraulic unit complete documentation, operating instructions and manual

Transformer - Voltage Transformer 500 --> 230V 100kVA Manufacturer Hinzen Type DU80-127kVA Power 100kVA Primae 3x500V 118A Sekundaer 3x230V 263A Hz 50-60 Insulating-Kl.E Special price

Bandwidth of 50-500 mm Band thickness 0.8 3.6 mm Belt speed 5-40 m / min Feed rollers 2 PCs Richwalzen (80 mm) - 11 PCs Working direction optional

material width:500 mm material thickness:0,2 - 3,8 mm feed length:0 - 9999,9 mm number of rolls:2 material cross-cut:128 mm² speed:60 m/min power requirement:2,0 kW dimensions (WxDxH):1,2 x 1,3 x 1,5 m roll feed:Servo control:Siemens S 7, modification 2002

material width:203 mm material thickness:0,1 - 1,9 mm feed length:101 mm weight:0,1 t dimensions (WxDxH):0,5 x 0,8 x 0,5 m

DREHTAINER Fundamentstütze – container support Number : 5411 – 12 – 362 – 9705 Own weight : 18 kg Capacity per piece : 15000 kg Minimum height : 265 mm Maximum height : 415 mm Base size : 300 x 300 mm Quantity : 7 pieces Including pallet with edges This lot is loaded for free

DREHTAINER Fundamentstütze – container support Number : 5411 – 12 – 362 – 9705 Own weight : 18 kg Capacity per piece : 15000 kg Minimum height : 265 mm Maximum height : 415 mm Base size : 300 x 300 mm Quantity : 12 pieces Including pallet with edges This lot is loaded for free

DREHTAINER Fundamentstütze – container support Number : 5411 – 12 – 362 – 9705 Own weight : 18 kg Capacity per piece : 15000 kg Minimum height : 265 mm Maximum height : 415 mm Base size : 300 x 300 mm Quantity : 12 pieces Including pallet with edges This lot is loaded for free

maximum load capacity with horizontal planing disc 60 tons, maximum load with vertical planboard 90° at a load center of one meter 30 tons – with a load center of two meters 19 tons.

Key data: 300 , 1 , 1300

Payload 1000 - 1250 kg Band width 305 and 505 mm Spreading range - 375 -520 mm Coil outer diameter 1300 mm without cabinet and control

Straightening machine make DREHER type RIMA model 1675 BGLOrder -No: A07/395-90 Year 1991Technical specifications:max. belt width 300 mmMinimum belt width 50 mmTape Thickness 0.6 - 2.5mmMaterial strength 400 N/mmBelt speed 5 - 30 m/min.7 straightening rollers diameter 60 mm2 feed rollers diameter 60 mm2 outfeed rollers diameter 60 mmDrive power 5.5 kWDimensions approx. 1200 x 1000 x 1500 mmWith- 3 digital displays- Emergency stop switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Small cutting mill make DREHER type S 15/20 LFabr. -No: K11776 built in 2004Rotor diameter 150 mmWorking width 200 mmRotor cutting bars 3Statorschneidleisten 2Insertion opening H x W 300 x 200 mmPower at 10 mm sieve 50 kg / h.Motor power 2.2 kWWeight approx. 230 kgWith- CE marking- electrical safety interlockused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Straightening machine make DREHER type Rima Mod. 1645 CVSerial no. A11 594/88, manufactured in 05/1989Technical specifications:Bhmx2lm3lqmax.working width: 300 mmStrip thickness min./max. : 0.4 - 1.2 mmAdjustable belt speed: 5 - 40 m / min.With- 4 pairs of rollers 40 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Load capacity 20 kN, strip width 450 mm, Coil inner diameter 445-530 mm Coil outer diameter 1400 mm Drive power 1.5 kW Rolling speed CONTROLLABLE with frequency converter Danfoss VLT 2800 Manual spreading of the reel crown Btto 600 kg

Double reel 2 x 2500 kg Bandwidth - up to 350 mm

diameter: 300 mm width: 200 mm height: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0500 mm coil outside dia.: 1400 mm weight max. in kg: 4000 kg plate thickness: 0,80 - 3,60 mm diam. of the rolls ca.: 80 mm feed rolls: 2 nomb. of straightening rolls: 7 exit pinch rolls: 2 speed: 5-30 m/min range of expansion ca.: 445 - 530 mm expansion: manuell total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Control conversion to SIEMENS S7 in 2012 - pneumatic pressure roller on the side - pneumatically ventilated feed roller - Straightening rollers manually adjustable - lateral belt guide at the inlet - Large roller basket at the outlet - Ultrasonic transmitter for loop control - Roller feed type 1125 D - Bandwidth max. 510 mm - Band thickness max. 6 mm with full width 5.50 mm - Roll diameter 125mm - Feed speed: max. 100 m/min. - pneumatically ventilated top roller - Lateral tape guide with digital display - Inlet roller basket  ...

Rotary actuator, hydraulic motor HKS rotary actuators Type: DA-H 125 - 180 Rotation angle 180 Operating pressure max. 210 bar Nominal torque max. approx. 5000 Nm Shaft diameter 70 mm Shaft pin length 140 mm Keyway width in the shaft 20 mm Flange diameter 222 mm Centering diameter 150 mm bolt circle 195 mm Connection thread 1/2 flange with 8 mounting holes 18 mm - 2 pieces screw-in fittings from 1/2 to 16S Overall length housing without drive shaft, without centering edge 384 mm Overall length housing with drive shaft 535 mm Weight 70 kg very good condition - New, unused from stock dissolution; used

material width: 200 mm material thickness: 3 mm feed length: 999999 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

live center, live center, live morse taper, live center, live lathe center, live center, slip-on center, heavy duty live center -Manufacturer: Roterberg Drehmeister, revolving center point slip-on point -Type: 80 TGL 30-2325 -Recording: see photos -Center point: Ø 50 - 148 mm -Total dimensions: Ø 149 x 220 mm -Weight: 9.8kg

Double coiler, coiler, decoiler, for sheet metal processing, punch, eccentric press, hydraulic press, punching machine -Handover in the current condition as seen -Drive: without -Max. Recording: Ø 590 mm -min Recording: Ø 250 mm - Recording width: 300 mm -Dimensions: 1460/1000/H1400 mm -Weight: 332 kg

material width: 200 mm coil weight: 1,5 t material thickness: 0,8 - 4,2 mm straightening roll diameter: 80 mm Number of straightening rolls: 7 Pcs. Coil turner 2370 B Load capacity 1.5 ton. Bandwidth 300 mm Coil inner diameter: 400 - 500 mm Arm length per arm: 670 mm Dimensions: depth 1,230 mm, housing height 1,100 mm, width 1,700 mm Weight: 760 kg. Straightener Dreher 1676 AV-RA2 Material width: 200 mm Material thickness: 08 - 4.2 mm Number of straightening rollers: 7 Number of pull rollers: 4 Straightening rollers diameter: 80 mm Would be down by a running press Documents circuit diagrams, operating instructions etc. available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 200 mm material thickness: 0,6 - 3,0 mm no. of straightening rolls: 7 number of draw-in rolls: 2 straightening roll diameter: 60 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DREHER HEAVY DUTY GRANULATOR, (photos taken before reconditioning), One machine from heavy scraps to regrind, S 60-65 SRV GF, Infeed 650 x 600 mm., solid rotor 650 mm wide 600 mm Ø, n.8 rotating knives, n.3 still knives, throughout rate 500-1.500 kg/h depending on screen, 75 kw drive, NEW electric panel, screen : bespoke to project, Machine totally reconditioned, See how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery), possible addition of blower, pipes, etc., Total dimensions: LxWxH 1,36 x 2,8 (3,3 open) x 3.64, This is a hevy duty granulator especiallly constructed, for the efficient granulation of thick walled plastic parts such as, lumps, chunks, plates, pipes. One machine does the job with great saving!, It can handle very heavy parts without need of pre-shredding, installed power : 75, HIGHLIGHTS: HEAVY DUTY MACHINE

Description: Including hydraulic steady rest, filter system, chip conveyor, documentation A standard truck is sufficient for transportation Technical specifications without guarantee. Attention: without hydraulic swivel chuck and tools turning diameter: 600 mm, serial number: 26,234, x-motion: 300 mm, z-motion: 1,500 mm, C-axis simultaneously controllable: Yes, Integrated C-axis: Yes, control: SIEMENS SINUMERIK 840 D, toolchanger positions: 8, number of places for driven tools: 1, total power requirement: 89 kW kW, weight approx.: 17,000 kg, Approx. Onsite Dimension. (l x w x h): 6,400 x 3,300 x 2,700 mm

Description: Order number: 940059 Max. Sheet width: approx. 300 mm With DREHER digital control Approx. Onsite Dimension. (l x w x h): 900 x 1,200 x 1,870 mm, weight approx.: 2,000 kg

revolving center, revolving center point, revolving Morse taper, revolving center point, revolving lathe center, center point, centering taper -Manufacturer: Drehmeister Revolving center point -Type: MK6 -Recording: MK6 -Total dimensions: Ø 124 x 350 mm -Weight: 11.8 kg

sheet width: 300 mm coil weight: 1,5 t coil internal dia.: 400 - 500 mm : je Arm 670 mm total power requirement: kW weight of the machine ca.: 760 kg dimensions of the machine ca.: T 1,23 x B 1,7 x H 1,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Turntable diameter 800 mm Approx. Onsite Dimension. (l x w x h): 900 x 900 x 900 mm, weight approx.: 60 kg

Description: Turntable diameter 800 mm Approx. Onsite Dimension. (l x w x h): 900 x 900 x 900 mm, weight approx.: 60 kg

material width:300 mm coil weight:2 x 1,25 t material thickness:0,4 - 1,2 mm coil internal diameter:320 - 420 mm coil external diameter:1300 mm no. of straightening rolls:9 straightening roll diameter:30 mm number of draw-in rolls:2 roll diameter:30 mm speed:3 - 30 m/min feed length:0 - 9999,9 mm power requirement:3,0 + 2,5 kW weight of decoiler:0,7 t dimensions decoiler (WxDxH):2,1 x 1,4 x 1,5 mm weight of straightening machine:0,45 t dimensions straightener (WxDxH):1,5 x 0,8 x 1,1 mm weight of the feeder:0,4 t dimensions feeder (WxDxH):1,2 x 0,8 x 1,1 mm universal straightening machine:SC 12-FQ double decoiler:2352 B-FPS expansion:hydraulic lag brake:pneumatic electronic roll feed:WAV-RDS-2Z, Modell 1082 B intermittant lifting:pneumatic control:Siemens S 5

Decoiler Coil weight: 2 x 2 ton Material width: 380 - 500 mm Coil exterior diameter: 1.300 - 1.400 mm Expansion range: 445 -530 mm Leveller / Straightener Material width : 40 - 500 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pinch rolls: 2 pcs. Diameter of the drawing rolls: 60 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 1,6 mm Cross section: 800 sq mm Feeding speed: 0 - 30 m / min Required power: 3 kW

- trockenlaufend, luftgekühlt - Saugleistung 129 m3/h - Leistung 4,0 kW  - Spannung 50 Hz, 400 V - Ansaugfilter integriert - Geräuschwerte 76 dB(A) - Abmessungen L=873, B=470, H=336 mm - Gewicht 111 kg

Control: manual Max.turning length: 1500 mm Max swing diametr over bed: 500 mm Quick Change Toolposts:1 Coolant tank:50l 2006 Made in Slovakia

Control: SIEMENS / MTC K Max.turning length: 1000 mm Max swing diametr over bed: 500 mm Quick Change Toolposts:1 Coolant tank:100l Made in Germany

Max.turning length: 600 mm Max swing diameter over bed: 250 mm Quick Change Toolposts:1 Coolant tank:50l Made in Germany Control: manual

Absolute rotary encoders, encoders, rotary encoders, encoders, absolute rotary encoders, absolute encoders, function encoders, resolvers, resolvers -Manufacturer: Hengstler, encoder with cable and connector -Type: R176TD/500ED.4A25KF-FO 0 533 339 -Voltage: 10-30VDC -Number: 1x encoder available -Price per piece -Dimension: 155/120/H80 mm -Weight: 0.7 kg/pc.

Absolute rotary encoders, encoders, rotary encoders, encoders, absolute rotary encoders, absolute encoders, function encoders, resolvers, resolvers -Manufacturer: Hengstler, encoder with cable and connector -Type: R176TD/500ED.4A25KF-FO 0 533 271 -Voltage: 10-30VDC -Number: 2x encoder available -Price per piece -Dimension: 155/120/H80 mm -Weight: 0.7 kg/pc.

Control: SIEMENS 840D Max.turning length: 1185 mm Max swing diameter over bed/slide: 640 mm/550mm Workpiece diametr: 400/250 mm Material passage through the spindle: 65 mm Max.diameter of the material for barloader: 65 mm Rotation speed(max.) 5000 rpm Sp

Control: SIEMENS 840D Max.turning length: 450 mm Max swing diametr over bed/Slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l M

Control: Heidenhain Max.turning length: 450 mm Max swing diameter over bed/slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l Ma

Universal - Swivel - Tilting table for MAHO MH 1000 Clamping area: 1050 mm x 630 mm The Universal - Swivel - Tilting Table is in good condition

plate width: 2980 mm plate depth: 3000 mm plate height: 1400 mm total power requirement: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): 1400 x 1750 mm Weight: , kg tiltable yes/no: ja RUCHSER assembly tilting table RU-MKS 1,4 --------------------------------------- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment demonstration machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actuation via foot valve. Roller conveyor can be folded down manually and pulled out to the side from 1400-2500 mm, roll length 140 mm closed. Roller conveyor height in vertical Table position adjustable f ...

Brand: Eder & Müller Type: KT tilting table Year of construction: Description: Pneumatic swivel from horizontal to vertical position. Support grid extendable from 1500 - 2300 width and 1000 - 1600 height. Grooved rubber pad (original underneath or foam pads) Dimensions: Table length: 1500 - 2300 Table level: 920 mm Table width: 1000 - 1600 Weight: 90 KG

Dimensions (L,W): mm Weight: kg adjustable height (yes/no): 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FENSTER-UNIVERSAL-DREH-KIPPTISCH RUCHSER-Universal for wing and frame motions. Rotary tipping table with pneumatic tilting device, work platform with 4 loading holes. Height 900 mm-1050 mm adjustable. Lifting device 400 mm 6 storage boxes Fahing facility Used machine without warranty or warranty. Loveling from the Hamburg location unloaded.