141,821 used machines on RESALE, but how to find them? Machine Search
racks: 17; support tube spacing: 60mm; rack length: 650mm; langth: 200 - 2000mm; rolls: Polyamid 4 Stück; depth: 870 - 1180mm; height: 198mm; safe load: 400kg; The user-friendly Varioflex drying rack is a space-saving and gentle solution for storing painted workpieces. The four swivel castors mean that it can also be used for transporting workpieces. Its solid tube frame design can be adjusted between 200 mm and 2,000 mm. With 17 inside and outside plastic-coated support tubes on each side, the rack can support up to 400 kg of evenly distributed weight. The plug-in inside and outside support tubes can be taken out and re-inserted as needed. When not in use, the drying rack can be collapsed and takes up minimal space.
Overview This Kematec T20-3 KMT, built in 2006, dries filled bottles with air knives on their way through an enclosed tunnel before labelling. The bottles run on a 120 mm plastic chain conveyor under inclined air nozzles on both sides. The machine is still installed in a wine bottling line and can be inspected on site. Technical data Manufacturer: Kematec Model: T20-3 KMT Year of manufacture: 2006 Machine type: bottle dryer (air knife tunnel) Conveyor: plastic chain, 120 mm wide Power supply: 400 V, 3 phases, 50 Hz Control voltage: 24 V DC Overall dimensions (L x W x H): 4,500 x 1,350 x 2,600 mm Equipment Drying tunnel with inclined air knife nozzles above and on both sides of the conveyor, fed by vertical air ducts Infeed screw and curved conveyor sections with adjustable guide rails and quick-release clamping levers Siemens SIMATIC touch panel (French, Dutch, German) with output counte ...
Manufacturer: FERMAT Model: WFC 10 CNC Year: 2020 Condition: Used Stock number: 9555 Control System: FANUC Series Oi-MP Operating hours: 1100 h Work table length: 1120 mm Work table width: 1000 mm Maximum table load (uniform): 5000 kg Maximum spindle speed: 3000 1/min X-axis travel: 1250 mm Y-axis travel: 1250 mm Travel travel Z-axis: 1250 mm Cone: ISO 50 Spindle diameter: 100 mm Machine height: 3308 mm Machine length: 3822 mm Machine width: 5883 mm Machine weight: 17735 kg
Surplus/Never Used/Never Installed Enerflex Built Electric Driven Natural Gas Compressors with a 400 H.P. Motor & Ariel JG2/1 Compressor Four (4) Surplus, Never Used, Never Installed, Enerflex built, Natural gas compressors, with a US Electric Motor, 400 H.P. 1800 RPM Motor, an Ariel compressor JG2/1 Single Piston Compressor, Air Gas Cooler, Assembly, Logix PLC on each unit, Automatic Recycle Valve for Capacity Control, Dual Coalescent Filters and Scrubbers.
Dry Transformer Manufacturer: Schneider Type: DLPS 63E The device is NEW and fully functional. see pictures for more details.
bore capacity in steel (diameter): . mm throat: 285 mm bore stroke: . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vendesi scambiatore di calore raffreddato ad aria (Dry Cooler / condensatore) industriale Güntner serie Profile, modello S-GFH 100.2D/1-E(D)-F4/6P. Apparecchiatura solida e affidabile, ideale per impianti di refrigerazione commerciale/industriale, condizionamento o raffreddamento di processo. Dotata di singolo ventilatore assiale ad alta efficienza installato a tetto.
Column drills Optimum, Simatec and Ibarmia
Arboga UM 3008 Drilling-Milling Machine -Drive: Gear (gear head) -Motor: 2-stage motor (3-phase / 380 V or 400 V) -Spindle speeds: 8 steps, 105–3,020 rpm -Tool holder: MK 3 (Morse taper 3) -Drilling capacity (steel): approx. 30 mm -Drilling depth (quill stroke): max. 130 mm (adjustable) -Max. distance spindle-table: 600 mm -Cross table dimensions: 585 × 245 mm -Adjustability head: height-adjustable and swivel in angle Dimensions: LxWxH 0.9x0.8x1.9 meters / Weight 600Kg
Key data: 70 mm
Column Drill Make: IBARMIA Type: B 70 Drilling capacity: Ø 70 Gear Drill -with drill feed -Coolant pump in the base -Drilling depth shutdown -Spindle mount MK-5 -Column diameter: Ø 240 mm -Drill ejection Height: 2550 mm Depth: 940 mm Width: 620 mm Table size: 660 x 780 mm Weight: approx. 1,300 kg with machine vice, mechanical-hydraulic Make: HILMA Wingspan: adjustable No guarantee, no return, no warranty Transport from the hall is carried out by the seller, at the expense of the buyer. Loading on trucks is done by the seller, at the expense of the buyer. Corresponding truck (load capacity) provided by buyer.
Gimon RG1000.2000 Drum coating system Serial: 14214 2018, Stainless, consists of 1100L stainless hopper on weigh cells, feeds onto continuous conveyor scale, feeds into Gimon disc coater and into Gimon drum coater fat drum, also comes with 1000L stainless IBC previously used for oil,
Indexable insert drills, high-performance drills with indexable inserts, solid drills, end mills, shank cutters, milling cutters, indexable insert end mills, end mills with internal cooling, indexable insert end mills, boring heads -Manufacturer: Amec, adjustable indexable insert drill Revolution Drill with internal cooling -Type: V Maxx R44x35-40M -Shaft diameter: 40 mm -Drill diameter range (D1): 66.0 mm to 71.1 mm (adjustable via cartridges) -Drilling depth: 3.5 x D / Usable length approx. 253 mm -Reversible inserts: not included -Dimensions: Ø 63 x 355 mm -Weight: 5.0 kg
- Total installed power 120 KW. - Drum diameter 3600 mm. - Maximum sand/metal capacity 110 t/h. - Rotation speed 2.30 rpm. - Water consumption 120 litres/min. - Includes: - GENERAL KINEMATICS SYNCROCOIL vibratory conveyor. - 2 outbound conveyor belts. - Hammer breaker unit equipped with 4 hydraulic grapples. - This equipment was part of the production line associated with the DISA DISAMATIC D3-Z-555 DMS molding machine, available separately under batch number A7-50548-2. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-5
x-travel: 600 mm y-travel: 410 mm z-travel: 500 mm Control: HEIDENHAIN TNC 530 HSCI table surface area: 800x400 mm T-slots: 3 T - slots distance: 125 mm table weight: 450 Kg rapid traverse: 30.000 mm/min taper ISO: ISO 40 DIN 69871 number of spindle speeds: 12.000 U/min/rpm Spindle power: 10/17 magazine: 20 Internal cooling system: 20 bar Chip coveyor: inkl. handwheel: HEIDENHAIN HR-410 total power requirement: 25 kW weight of the machine ca.: 4.150 kg dimensions of the machine ca.: m -T-slots (width, spacing) 18, 125 mm -Distance from table to floor 885 mm -Distance from table to spindle nose (min./max.) 140 / 650 mm -Type Chain -Tool selection Random -Max. tool diameter with adjacent pockets empty 135 mm -Max. tool diameter without adjacent pockets empty 85 mm -Max. tool length 250 mm Max. tool weight 6 kg -Workpiece cleaning gun Included -Optical measuring systems (glass sc ...
Refrigerated compressed air dryer with external inline filter housing and connected pipework, as pictured. Nameplate specifications: - Air flow: 6,000 l/min - Electrical power: 1.43 kW - Maximum pressure: 16 bar - Power supply: 230 V, single-phase, 50 Hz - Refrigerant: R134a, 0.65 kg - Maximum inlet temperature: 45°C - Maximum ambient temperature: 40°C Auction-ID: A1-50699-12
T-slot clamping surface: 600x450 mm, max. speed: 3000 rpm
Stainless steel mixing tank for dressings and sauces, This mixing tank has an agitator from Parema Procestechniek (type PAR5L-25, built 2006) and was used as a dressing mixer. The tank has a hinged lid and a conical bottom with outlet, and stands on legs with castors., Agitator speed is set steplessly with the dial on the control cabinet, which houses a frequency inverter., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/parema-mixing-tank-with-agitator/, Type: Mixing tank with agitator, Speed: Stepless (frequency inverter), Tank: Hinged lid, conical bottom with outlet, Construction: Stainless steel, on legs with castors
Spin dryer for washed vegetables, This centrifuge spins washed lettuce, vegetables or herbs dry. The product goes into the removable blue basket, the lid closes and the machine spins the water out, which drains through the outlet at the side., Spin time is set with the timer switch on the base. There is no manufacturer rating plate, so the make and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/vegetable-spin-dryer/, Type: Vegetable spin dryer (centrifuge), Basket: Removable plastic basket, Controls: Timer switch, Drain: Water outlet at the side, Construction: Stainless steel, hinged lid
: neu : ca. 6 Monate ab Auftragse : Taiwan : 16900 € : 324.48 € : 32 mm : MK 4 : 220 - 950 mm : 73 - 1.247 (6) U/min : Stahl: M 25, Guss: M 32 : 1800 mm : 830 mm : 2190 mm : 1250 kg : 350 - 1.210 mm : 0,05 - 0,15 (3) mm/min : 1.5 kW : 210 mm : 220 mm : 1.260 x 640 x 160 mm : 0,75 kW : 600 x 445 x 380 mm : 2320 mm left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The Conrad Combi 500 HD is a crawler-mounted drilling rig designed for reverse circulation, airlift reverse circulation, percussive drilling, and direct-circulation rotary drilling., Includes 28 drill pipes with an outer diameter of 160 mm and an inner pipe of 130 mm 400 cm long., The rig is mounted on a hydraulically driven crawler undercarriage measuring approximately 2.5 m in width, 4.6 m in length, and 0.85 m in height. The tracks are 600 mm wide and fitted with rubber pads. The frame features four independently operated hydraulic outriggers—two at the front and two at the rear—with a stroke of 1,000 mm. A hydraulic turntable allows the machine to rotate 360° in either direction without moving the tracks., Power is provided by an Iveco FPT-C87-ENTZ Tier 4 / Stage IIII Final diesel engine delivering a maximum of 305 kW (415 hp) at 2,100 rpm. Maximum engine torque is 1,800 Nm at 1 ...
: neu : ca. 6 Monate ab Auftragse : Taiwan : 30100 € : 574.91 € : 50 mm : MK 5 : 360 - 1.250 mm : 44 - 1.206 (12) U/min : Stahl/Guß: M40/M50 : 2060 mm : 995 mm : 2240 mm : 2300 kg : 441 - 1.345 mm : 0,06 - 0,2 (3) mm/min : 3.7 kW : 300 mm : 270 mm : 1.785 x 785 x 190 mm : 0,75 kW : 635 x 520 x 420 mm : 2645 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 39200 € : 748.72 € : 50 mm : MK 5 : 350 - 1.600 mm : 56 - 1.450 (12) U/min : Stahl/Guß: M40/M50 : 2670 mm : 1120 mm : 2410 mm : 3300 kg : 465 - 1.420 mm : 0,06 - 0,2 (3) mm/min : 3.7 kW : 320 mm : 270 mm : 2.550 x 970 x 200 mm : 1,5 kW : 630 x 500 x 500 mm : 2760 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 51700 € : 977.13 € : 65 mm : MK 5 : 440 - 1.580 mm : 40 - 1.920 (12) U/min : Stahl/Guß: M50/M60 : 2850 mm : 1400 mm : 2940 mm : 4600 kg : 380 - 1.600 mm : 0,07 - 0,96 (6) mm/min : 5.5 kW : 432 mm : 370 mm : 2.480 x 1.050 x 210 mm : 1,5 kW : 700 x 500 x 400 mm : 3170 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of Log ...
: neu : ca. 6 Monate ab Auftragse : Taiwan : 21300 € : 408.96 € : 42 mm : MK 4 : 280 - 1.100 mm : 44 - 1.500 (12) U/min : Stahl: M 25, Guss: M 38 : 1880 mm : 870 mm : 2210 mm : 1800 kg : 470 - 1.270 mm : 0,05 - 0,15 (3) mm/min : 2.2 kW : 260 mm : 280 mm : 1.725 x 715 x 180 mm : 635 x 520 x 415 mm : 2530 mm left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 26272 Technical data: - Drilling performance in steel ST 60 21.5 mm - Drilling spindle holder MK 2 - Drilling spindle stroke 120 mm - 3 drilling spindle speeds - Projection 260 mm - Max. distance table - drilling spindle 620 mm - Table with 2 T-slots 380 x 320 mm - Height adjustable via rack with hand crank - Drive 400 V - Space requirement approx. W 550 x H 1800 x D 750 mm - Weight approx. 200 kg
Flight case originally designed for 2 wash700 DRESS Auction-ID: A1-50934-17
Hydro-Pack Hydraulic Pump/Motor Units with Parker Hydraulic Component Separate lot of used hydraulic components comprising approximately three Hydro-Pack hydraulic pump/motor units, a Parker hydraulic unit and one mechanical hydraulic control/drive assembly marked HIDRAULIKA”. Hydro-Pack code: P10100SF131 Hydro-Pack serial numbers: 24.01.647636 and 22.23.97423 Quantity: Approximately 3 hydraulic pump/motor units, 1 Parker hydraulic unit and 1 Hidraulika control/drive assembly Hydro-Pack features: Splined shafts, threaded hydraulic ports and mounting flanges Additional components: Associated shafts and couplings may be included Approximate dimensions of main unit: 450 x 280 x 300 mm Approximate weight of main unit: 35 kg The components are offered in used condition after outdoor storage. The Hydro-Pack housings appear intact, with identification plates, capped por ...
Key data: 130 mm, 3500 mm, 2000 mm
Manufacturer: TOS Model No.: WHN 13.4 CNC Year: GO 2025 Condition: Used Stock number: 9606 Control system: SIEMENS Sinumerik 802 Work table length: 1800 mm Work table width: 1800 mm Maximum table load (uniform): 12000 kg X-axis travel: 3500 mm Y-axis travel: 2000 mm Travel travel Z-axis: 1250 mm Spindle diameter: 130 mm Machine weight: 32000 kg
Heavy-Duty Marine Wire-Rope Winch Used commercial marine winch suitable for hauling trawl equipment, fishing nets, ropes and other heavy lines. The winch is equipped with a large single steel drum, multi-layer steel wire rope, reduction gearing, powered drive and mechanical band brake. Machine type: Marine/fishing wire-rope winch Application: Trawl, net and gear hauling Drive: Powered drive with reduction gearbox Drum: Single steel wire-rope drum Rope: Multi-layer steel wire rope included Brake: External mechanical band brake with manual lever Approximate dimensions: 1,500 x 1,000 x 1,100 mm Approximate weight: 750 kg The winch is offered in used condition with significant corrosion on the wire rope, drum flanges, brake mechanism, fasteners and structural frame. The rope termination is heavily weathered. The wire rope, brake lining, gearbox, bearings and drive re ...
\" ELMALI EHSP-150 Hydraulic Deep Drawing Press Manufacturer: Elmali Makina Sanayi ve Ticaret Ltd. Sti. Model: EHSP-150 Machine type: Hydraulic Deep Drawing Press Year: 2021 Serial number: EHSP-150/150 S.01 Certification: CE compliant Working hours: 0 h Heavy-duty hydraulic press designed for deep drawing, stamping and forming of sheet metal. The machine is reported as never used, with 0 working hours. Equipped with ELMALI touchscreen control, separate control cabinet and remote operator station. Technical specifications: Press force: 150 tons Motor power: 30 kW Table / ram dimensions: 1,000 × 1,200 mm Stroke: 600 / 250 mm Hydraulic oil: ISO VG 46 Approx. dimensions (L × W × H): 2,200 × 1,900 × 4,300 mm Machine weight: Approx. 10,500 kg Equipment: ELMALI PLC touchscreen control Separate operator control cabinet Remote operating station Hydraulic po ...
Flight case originally designed for 2 wash700 DRESS Auction-ID: A1-50934-19
Flight case originally designed for 2 wash700 DRESS Auction-ID: A1-50934-21
Flight case originally designed for 2 wash700 DRESS Auction-ID: A1-50934-12
SERVO 7150 ist eine Tischbohrmaschine, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazität: Bohrleistung in Stahl bis 3 mm; Tisch 182×300 mm; Abstand Tisch–Spindelnase 0–130 mm. Technische Daten: stufenlose Spindeldrehzahl 200–20000 t/min, Anschluss 220 Volt, Maschinengewicht ca. 9,5 kg. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automotive, Uhrenbau, Werkzeugmaschinen, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr
Industrial Electric Motor-Driven Pump Assembly Used industrial pump assembly comprising a three-phase electric motor, coupling or bearing housing and cast pump body. The configuration is suitable for centrifugal or transfer pumping of water and other low-viscosity liquids. Machine type: Electric motor-driven industrial pump Drive: Three-phase electric motor Pump configuration: Cast pump body with coupling or bearing housing Features: Protective motor fan cover, electrical terminal box and pump pipe connection Approximate dimensions: 950 x 400 x 450 mm Approximate weight: 90 kg The pump assembly is offered in used condition, untested and with operation unknown. Visible wear includes heavy dirt, chipped paint, surface corrosion, oxidized fasteners and contamination from prolonged storage. The motor, pump housing, coupling, bearings and electrical connections require in ...
ACIERA 22 VA ist eine Ständerbohrmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Bohren in Stahl 22 mm, Guss 24 mm; Ausladung 300 mm; Bohrtiefe (Pinolenhub) 120 mm; Verstellung Kopf 300 mm; Tisch 700x370 mm, Aufspannfläche 580x280 mm; Verfahrwege X330 Y210 Z350 mm. Technische Daten: Spindelaufnahme MK:3; stufenlos 40–3600 t/min; Vorschübe 0,02–0,25 mm/t; Anschluss 3x380 V 50 Hz; Spindelmotor 1,0/1,5 CV; Gewicht 990 kg; Abmessungen 1330x900x1800 mm. Zubehör: Digitalanzeige 2 Achsen, Gewindeschneideinrichtung, Bohrfutter, Beleuchtung, Zentriermikroskop, Ausdrehkopf, Werkzeugschrank, Schnellwechseleinrichtung, Tiefenanschlag, Spannzangensatz, Briden, Servicewerkzeuge; revidiert 2011. Erreicht enge Toleranzen; typische Branchen: Automotive, Uhrenindustrie, Maschinenbau, Luftfahrt, Medizintechnik Technische Daten ohne Gewähr
Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills -Finger milling cutter: indexable insert end mill with internal cooling, 2 pieces -Receptacle: Ø 25 mm -Diameter: 25 and 30 mm -Levy/Price: complete -Transport dimensions: 210/70/H40 mm -Weight: 1.0kg
USED WEEREN DH 20II GA MACHINE (STRAIGHTENING, CENTERING, EXTERNAL TURNING AND CHAMFERING) FOR SHAFT AND TUBE END MACHINING Year : 2008 Capacity: max. diameter: 36 mm Machining length: 35 mm Workpiece length: minimum: 150 mm - max: 1150mm Equipped with 1 SIEMENS PLC 2 GUHRING machining heads Dimensions and weight Machine: 3900x1550xH1800mm - Container: 1550x500xH1000mm - 2 pallets weight 6500 kg Auction-ID: A1-50950-80
USED VILAR DRILL SHARPENER type 115VL50 Maximum diameter of the drill bits: 50mm Sharpening of the drills on the left and right Dimensions and weight Pallet Europe 1200x800xH1600mm - weight 500 kg Auction-ID: A1-50950-77
USED WORTHINGTON CREYSSENSAC TYPE CW 27 AIR DRYER Serial No.: 1100813952 Year: 1998 Power: 1.4 kW Dimensions and weight 1500x1000H1600mm - weight 800kg Auction-ID: A1-50950-83
USED BRIERLEY ZB32 DRILL GRINDER Maximum diameter of the drill bits: 32 mm Left and right sharpening Dimensions and weight Euro pallet 1200x800xH1600mm - weight 250 kg Auction-ID: A1-50950-7
bore capacity in steel (diameter): 35.0 / 40.0 mm throat: 315 mm bore stroke: 180 mm turning speeds: 130 - 3500 U/min table-size: 615 x 470 mm column diameter: 155 mm feed: 0.1 / 0.2 / 0.3 mm/U spindle taper MT: 4 MK engine output: 2.0 / 2.4 kW weight: 450 kg range L-W-H: 800 x 650 x 2100 mm Features: - Heavy-duty column drill press - With extended column (200 mm) - Drive: VARIO V-belt Continuously variable speed control - automatic spindle feed (0.1/0.2/0.3 mm/rev) with electromagnetic engagement - pole-changing motor - clockwise rotation of the drill spindle - adjustable fixed drill depth stop - Machine table with 2 T-slots Height-adjustable via hand crank - Machined base plate - Coolant system in the machine base - Machine light - Emergency stop button on the front - Operating instructions (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...
bore capacity in steel (diameter): 55.0 mm throat: 300 mm bore stroke: 140 mm turning speeds: 70 - 2300 U/min table:: 615 x 430 mm bore spindles - Morse Taper: 4 Kurzspindel MK column diameter: 145 mm feed: 0.10 + 0.30 mm/U distance spindle /table: 150 / 735 mm weight: 380 kg height of the machine: ca. 1.850 mm Current list price: approx. 15,000 euros Special price available upon request Features: - Robust INDUSTRIE column drill press Drive: VARIO V-belt - Automatic spindle feed Feed mechanism: 0.1 + 0.3 mm/rev Feed overload protection - Stepless speed adjustment Includes digital speed display - Height-adjustable worktable with 2 T-slots - Right/left rotation of the work spindle - Emergency stop button on the front - User manual (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40.0 mm bore capacity in cast iron: 55.0 mm throat: 335 mm bore stroke: 200 mm bore spindles - Morse Taper: MK 4 turning speeds: 60 - 1.530 U/min table:: 740 x 620 mm feed: 0.15/0.2/0.3/0.36 mm/U total power requirement: 2.6 / 3.1 kW weight of the machine ca.: 850 kg range L-W-H: 800 x 1150 x 2040 mm Machine comes from a vocational training workshop Good condition () Features: - Heavy-duty/robust bench-mounted drill press - Drive: VARIO V-belt - Automatic spindle feed (0.15/0.2/0.3/0.36 mm/rev) - Stepless speed adjustment - 2 work tables with T-slots Height-adjustable via hand crank - Adjustable drilling depth stop - Pole-changing motor - Machine light - Emergency stop button, front - Operatorâs manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dowel and slotted hole drilling machine GANNER JUNIOR 320 LBM very good condition, as good as new, the machine comes from a small carpenter's shop and was used there very little This allows slotted holes to be milled and dowel holes to be drilled in 2 planes without reclamping 380V, 1500W Speed: 2800 rpm Year of Make: 1990 with the machine you can mill slotted holes for e.g. lock cases and similar things or make all kinds of frame and dowel connections, at right angles, blunt and mitred ideal for the production of dowel joints in timber frame construction, furniture, doors, windows and stairs construction and for similar things by drilling on 2 levels, by the grids and stops and by the construction of the machine, dowel connections are made in the shortest possible time, which makes the machine very economical the machine requires a compressed air connection of 6bar (the air ...
Manufacturer: TOS Model No.: WHN 13 Year: 1976 Condition: Used Stock number: 9611 Work table length: 1800 mm Work table width: 1800 mm X-axis travel: 3500 mm Y-axis travel: 2000 mm Z-axis travel: 800 mm Spindle diameter: 130 mm Machine weight: 32000 kg
Manufacturer: TOS Model: W 100 A Year: 1987 Condition: Used Stock number: 9615 Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm Spindle diameter: 100 mm Machine weight: 14000 kg
maximum number of results exceeded
please refine your search
16.000 € 
