downstream used for sale

Multivalent steam boiler system 2 x 10 MW, AS NEW For dusty fuels or natural gas H. 2 identical lines: Single-flame tube boiler with economiser Fuel so far: lignite dust Calorific value Hu: 22,190 kJ/kg Ash content: 3.0 % – 3.5 % Rated thermal input: 19.5 MW FWL (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation Preset also for natural gas operation H Calorific value HS: 11.4 kJ/Nm³ (calorific value Hi 10.4 kJ/Nm³) Rated thermal input: 19.5 MW (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation The change of the burner operation is carried out by changing a fitting piece on the burner. Boiler 1 and boiler 2 can be fired at the same time with different fuels. If desired, the contents of both fuel silos can also be b ...

Width 82 cm Year of construction: 2005 Round stack feeder RFH-82 1st station: 6 folded pockets 82 cm automatic folding pocket adjustment automatic folding roller adjustment upstream knife shaft downstream knife shaft 2nd station: 4 folded pockets 66 cm automatic folding pocket adjustment automatic folding roller adjustment upstream knife shaft downstream knife shaft 3rd station: 2 fold pockets 56 cm automatic folding pocket adjustment automatic folding roller adjustment downstream knife shaft Standing sheet delivery SBP 66 Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Steam generation plant consisting of Double flame tube boiler with economiser, 2 x SAACKE burner Teminox for natural gas H, calorific value HS 11.4 kJ/Nm³, 14MW (2 x 7 MW), 17 to. Saturated steam at 20 bar ü (25 bar hp). Boiler: Manufacturer LOOS Deutschland GmbH Type ZFR 2300 Type of large-capacity water boiler with two flame tubes (three-speed) and a flue gas water preheater (Economizer) Permissible operating pressure (PS): 24-25 bar Permissible operating temperature: 224°C Permissible steam output: 23 to. Saturated steam Burner: 2 x SAACKE Type Teminox GS 75-22 Fuel: Natural gas There is a soundproofing hood for each burner Fireplace: 37 meters above ground Outlet area: 0.507 m² Stainless steel double fireplace Water treatment plant Manufacturer CHRIST consisting of softening system and downstream reverse osmosis system Complete installation from y ...

Falzmaschine/Folding Machine Width 76 cm Year of construction: 2002 Round stack feeder Dualfeed Navigator Control 1st station: 6 fold pockets HHS control unit for clock perforation upstream knife shaft double downstream knife shaft 2nd station: 6 fold pockets upstream knife shaft downstream knife shaft HHS control unit for clock perforation flexible blade folding unit Z2 5 heads for clock perforation Shed delivery ASP 82-2 ME Price on request. We deliver and install worldwide!

Width 52 cm Year of construction: 2005 Round stack feeder Ri 52 1st station: 6 folded pockets 52 cm downstream knife shaft 2nd station: 4 folded pockets 52 cm downstream knife shaft Noise absorbent hoods Counting device DCT 500 Delivery date: immediately Price on request. We deliver and install worldwide!

Width 56 cm Built in 1993 Round pile feeder Counter PCS 100 1st station: 4 fold pockets 56 cm downstream knife shaft 2nd station: 4 fold pockets 56 cm downstream knife shaft Noise Insulation Hoods Shed delivery SAK 56 without compressors / air supply Price on request. We deliver and install worldwide!

Multi-bag filter in 316 L stainless steel. Total filtering surface 5.76 m2 Equipped with 12 U bag support baskets in 316 perforated ion. Filter element 12 bags size 20 Volume 735 L Weight: 380 Kg Bag type: 12 PO 31 C Maximum recommended flow rate: 480 m3/h Inlet / outlet diameter : 250 mm Max temperature : 100?C Max pressure : 6 bar at 100?C Downstream depressurisation: tube with valve diameter 25 Downstream draining diameter: smooth tube diameter 40 Quick and easy opening Available units: x2. Each filter is sold with new bags.

Folding machine Heidelberg KH56/4 KT-FFH 56; cleaned and tested; Flat pile feeder FFH; Format max.56x90cm, min.14x18cm; 4 automatic folding pockets; 1x Sword; 1x downstream folding pocket; shed display; Altar fold pocket with control unit ACC2 2.4; Compressor. Folding machine Heidelberg KH56/4 KT-FFH 56; cleaned and checked; flat pile feeder FFH; size max.56x90cm, min.14x18cm; four automatic pockets; one sword; one downstream pocket; stream delivery; gate fold pocket with control system ACC 2.4; compressor.

The "floor" of the dryer cooler consists of a nationwide, often special ventilation hopper system with downstream forced discharge. Depending on the customer application and products, this hopper system is additionally created with anumable fixtures. The roof-shaped design prevents the products from flowing freely. The filling and emptying of the cooler can be carried out continuously, fully automatically or in set / circulation. The standard cooler dimensions are 3x3 m and up to 18 meters high, depending on the number of superstructures, depending on the customer's requirements. for maize, cereals, rice, granules and other free-flowing products

2 pieces Mosca strapping machines, bundling machine - used - : Price per piece from location: 2,295.- EUR (net)! Manufacturer: Mosca Type: RO-TR-13 Year of construction: 1997 Welded closure: Thermal Bandwidth: 5-9mm Belt voltage: Infinitely adjustable Belt unwinders: Belt coils inside- 200 Weight: 415kg mains voltage 200-440V Airpressure: 6 bar Air consumption: 5.4l/stroke noise emission: 75 dB measured according to DIN 45635 pressing pressure: downward max. 650N at 6 bar / upward max. 100N at 2 bar Afield: The fully automatic strapping machine for almost all packaging areas and package sizes: Width: 100mm - 550mm Length: 150mm - 600mm Height: 5mm - 400mm Machine Description: Fully Automatic Plastic Strapping Machine for Poly-Propylene Packaging Tapes. High connection voltage due to minimum distance from the transport plane to the locking unit. Transport speed of 0.1 -0.8 m/sec  ...

– Thermoforming and Sealing Machine – GEA POWERPACK NT 76750101 – Year 2014 The GEA PowerPak thermoforming machine is specially adapted to different applications (vacuum, MAP, shrink, topform, skin, zipper, medical and technical packaging). Conversion to other packaging is easy and format changeover is quick and takes place in a few simple steps. To adapt this equipment to your needs, the Powerpak Thermoformer-Sealer can easily be completed with various integrated upstream and downstream components. A powerful conveyor chain securely grips the lower web of the feed drum. A precision servo motor indexes the web throughout the machine process. The length of the index is programmable on the HMI and stored as a recipe parameter. The loading area is accessible from both sides for several operators. Powerful GEA membrane sealing system for reliable seals and constant pe ...

Powder mixing plant Ytron Dr. Karg, built in 2012 and with Flow tank. Capacity up to 10 to/h The powder was treated via pipes into the flow vessel. The whey or milk powder mixture was via the plate heater and hot water Cycle in batch operation with the basic tanks set and then released for further processing. With frame and staircase a.) With a GEA plate heater for treatment the powder water solution. Hersteler FA. GEA TDS GmbH, Sarstedt Type: VT 20 CD-9-C-16 170/7412 No. 3600 4074, year of construction 2012 b.) With wall-mounted control cabinet system Siemens S 7 for process technology, CIP tank system and Control of cleaning paths c.) With 1 CIP system for the standing tank as a 1-tank cleaning system for the Batch operation and for the powder mixing plant Self. Content CIP tanks 15,000 l insulated, deformed inwards in the upper area with valve no ...

Qty 1 x Berstorff 4 roll inverted L calender, serial number: 11892-907, original year 1966 (but upgraded/refurbished in 2012), Roll sizes: 850mm dia x 2440mm wide, peripherally drilled rolls (steam/high pressure hot water heating), motorised nip adjustment, cross axis, roll bending, hydraulic preload etc. 2 speed Unidrive gearbox on universal couplings, Speed setting 1: 33.7 rpm, speed setting 2: 16.85 rpm, with 98kW DC variable speed motor fitted to each roll. Operator controls renewed recently (Siemens S7 plc) Downstream equipment: Set of 5 x cooling drums Beta thickness measuring device Edge trimming unit Menzel length cutter 3 position winder Complete and in very good condition. 2 spare rolls.

750 MW each, UNUSED Gas Based Complete Combined Cycle Power Plants 2 units available Technical Specifications: The Project Details: 1. EACH module has two Gas turbines GE 9FA.03 (DLN2+) and one Steam turbine GE D11. Each GT exhaust is directed to the triple pressure unfired, natural circulation horizontal, type CMI USA HRSG. This configuration helps turndown operation of station up to 45%. 2. The Station is based on robust design of GE Gas Turbine with high efficiency DLN2+ Dry low Nox system, each GT is site rated for an output of 235 MW and the triple pressure reheat GE D11 Steam Turbine with downstream Exhaust, is site rated at 266 MW. The HRSG is a Triple pressure, Natural circulation, Horizontal design type with Deaerator atop the LP drum. Thus Net Combined cycle efficiency at Site condition is approx 57% on LHV basis. The inherent design of the gas turbine reduced the N ...

Sidel SBO 20 Universal Aseptic Bottling line - Capacity: up to 40.000 bph by 500 ml / 28.000 bph by 1500 ml Products: fruit juices Bottle formats: 200 ml, 500 ml, 1500 ml, 1750 ml Year of manufacturing: 2011 consisting of: 1. SIDEL SBO 20 Universal PET blowing machine, year of manufacturing: 2011 composed of: – preform tipper – preform hopper, unscrambler and infeed rail – Sidel ARS system HP air low consumption – Eco2 oven with 20 heating modules for 38 neck – blowing station for 20 quick change shell molds, – Compressor ABC 4HP-4-LT complete but without cooling tower moulds are not included 2. Sidel Rafale air conveyor system from exit Sidel blower to entry Sidel aseptic filler with curves etc – length approx. 250 meters also with full automation & drive and electrical panels. 3. Sidel Sensofill FMA 80/24K BS 13 aseptic tribloc, composed o ...

MOSCA RO-TR-P-5 Strapping Machine A fully automatic MOSCA strapping machine type RO-TR-P-5. The machine is in very good condition. The original price was about 18,500 € Technical details: Heating wedge welding system with electronic heating regulation Fully automatic belt threading Drive of the unit in DC technology with wear-free direct drives Tape End Query with Tape Jam Throw Automatic belt ring ejection in case of incorrect triggering Belt coil quick-change system Wear-free, force-controlled belt guidance Integration into any processing line possible Hinged transport systems with frequency control PLC control Control panel for setting the operating modes, switching distances, strip tension Potential-free contacts to upstream and downstream systems Automatic PP straps width 5,6,7,8,9 or 12mm Data sheet & machine map under these links

Cartridge filters, among other things, for the filtering of steel dusts Manufacturer: Donaldson Torit Type: TDS 20 Year of construction: 2005 Power consumption fan: 22 kW Volume flow: 18,000 m³/h Pressing: 2,550 Pa Weight: 1,800 kg Construction: Robust filter housing made of 3 and 4 mm sheet steel Special features: Upstream cyclone made of Hardox sheet metal, downstream police filter system, various pipes and screws

Size max: 738 x 1100 mm Size min: 210 x 297 mm Longest fold: 560 mm Shortest fold: 35 mm (58 mm at pocket 1) Paper thickness: 40 - 250 g/m2 Staplehight: Palet feeder: 1200 mm - PFU-74F pallet feeder - Touchscreen Monitor - Automatic setting - 1. Station 6 folding pockets 2. Station 1 knife plus folding pocket left 3. Station 1 knife - Downstream slitter shafts in the first and second folding unit - electron. Ultrasonic-double sheet control - Creasing and perforating device - PSX-56 High-Perfomance Package Delivery

Width 78 cm Year of construction 2001 MC Control Round pile feeder Vacubelt 6 fold pockets in the parallel break section motorized fold bag adjustment downstream knife shaft Noise insulation hood Palamides delta 703 Bundling machine Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Technical data paper shredder: Manufacturer Bollegraaf Type HBS 110 - 1500 Year of manufacture 1994 Drive power 110 kW Throughput approx. 25 t/hour Dimensions of feed hopper 1,970 x 2,000 mm Dimensions of built-up machine 3,160 x 4,400 x 3,980 mm (L x W x H) Weight approx. 11.5 t Special features: The drive unit is equipped with a hydraulic fluid coupling that minimises current peaks during start-up and operation. The rotor is mounted on oversized roller bearings and equipped with replaceable hammers that are extremely wear-resistant. Range of applications: The shredder was used to shred paper, cardboard, newspapers, magazines, books, etc. in order to achieve optimum compaction and dimensional stability of the bales in the downstream baling press. Condition of the shredder: The shredder is in good working condition and will be dismantled at the end of April. Scope of delivery: Shredder ...

format 46 x 66 cm Year of construction 2003 Flat stack feeder Vacustar 1st station: 4 folded sheets downstream knife shaft Noise insulation hood Counting device MS-Control without display Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Width 68 cm Year of construction: 2019 2nd station: 2 folded pockets 68 cm downstream knife shaft Delivery date: immediately Price on request. We deliver and install worldwide!

Width 52 cm Year of construction 1992 Flat stack feeder with suction head Counter MCS 106 4 fold plates in the parallel break section Segmented folding rollers downstream knife shaft 2 folded swords in the cross-fracture section 1 further fold pocket after the 1st cruciate rupture Shed display Price on request. We deliver and install worldwide!

Width 72 cm Year of construction: 1992 Pallet feeder with suction head 4 fold pockets in the parallel fracture section 2 folding swords in the cross-breaking area 1 more fold pocket after the 1st cross break Noise absorbing hood downstream knife shaft Shed display Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Width 55 cm Year of construction: 1999 Round stack feeder 1st station: 4 fold pockets 2nd station: 4 folding pockets Cross fracture KB Noise absorbent hoods downstream knife shaft Window rebate pocket Shed display SAK Power supply: 230 volts Delivery date: immediately from stock Price on request. We deliver and install worldwide!

STM PET blowing machine for 5 to 7 liters bottles Manufacturing year 2015 low working hours Currently blowing 6 liters bottles on mould 3 cavities at 30 bar. Capacity 3.000 bph Machine equipped with: preforms hopper and feeding system loading and process of the preforms inside oven with internal grip Preform heating by IR oven with 6 heaters each heating module with 8 lamps Preform grip and transfer to the mould Stretching & blowing station Exit device of the processed bottle EPI Eco power energy saving system Chiller and HP compressor included & also full filling & downstream line Unique opportunity Available immediately

Width 52 cm Year of construction: 2011 Round stack feeder 1st station: 10 fold pockets double downstream knife shaft Counting device MC-Control Shed delivery ASP 66-2 ME Machine condition: cleaned and tested Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill  chemical products into plastic containers. With the exception of the bottle feeder and Posimat, glass bottles can also be processed. Due to ATEX certification, explosive products can be processed with the line. The equipment comes with a 2-year warranty (in single-shift operation) and all components of the equipment can be purchased separately.  Technical details Capacity: 9000 containers/h (varies according to bottle volume and product).  Container  Max. Diameter: 100mm  Max. Height: 300mm  Control Siemens S7 Single machines  Bottle Hopper | ALWID | POSIMAT-ACCESS-N15  Bottle feeder with hopper 2000 l, in stainless steel, chassis and supports in mild steel painted Positronic control system for optimal adaptation to downstream filler Machine, completely internally ...

Falzmaschine/Folding Machine Width 76 cm Year of construction: 2000 Flat-pile feeder with Vaculift and Vacubelt Counting device MPC 6 seam pockets in the parallel fraction downstream knife shaft 2 folding swords in the cross-breaking area 1 more fold pocket after the 1st cross break Noise absorbing hood Shed delivery ASP 66-2 ME Price on request. We deliver and install worldwide!

Width 76 cm Year of construction: 2000 Flat-pile feeder with Vaculift and Vacubelt Counting device MPC 6 seam pockets in the parallel fraction downstream knife shaft 2 folding swords in the cross-breaking area Noise absorbing hood Vertical sheet delivery SAP 46 L Delivery date: immediately Price on request. We deliver and install worldwide!

Overview  The bottle unscrambler was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to handle explosive products. The machine can be purchased with warranty.  Technical data  Capacity  12.000 bph at 50 ml HDPE, oval 43 x 23 x 95 mm  14.000 bph at 250 ml HDPE, Ø60 mm x 126 mm Incl. 2 format sets for processing the above mentioned bottle sizes. Bottle sizes Fully enclosed cabin, machine frame and wall panels in stainless steel Floor frame in mild steel, painted (similar to RAL 9006 silver gray) Quick access due to large doors as well as quickly removable panels Rejection of defective bottles  Easy format changeover due to quick-change system without tools Siemens S7 control system  Bottle loading system with hopper 1000 l, in stainless stee ...

Isolation transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKL 25 S ( RDRKL25S ) 0,8 kVA Prim. 3 x 380 V sec. 24 V DC 25 A 50 - 60 Hz Spare part for TRAUB TND300 ! used, tested, with downstream three-phase bridge rectifier ! Dimensions: 210 x 210 x 190 mm

Working width max. 600 mm Workpiece thickness max. 150 mm Automatic measurement of the workpiece thickness Feed rate infinitely variable 2 - 12 m/min. Aggregate assembly: 1) Contact roller unit with smooth steel roller Drive motor 15 KW, pole switchable for 2 grinding speeds 2) Rubber contact roller unit with corrugated rubber roller Hardness 60 Shore drive motor 15 KW, pole switchable, this The motor also drives the downstream sanding shoe unit 3) Pneumatically controlled sanding pad unit Machine complete with small part return, designed as a transport curve, as a plate conveyor transport Machine weight approx. 1,800 kg Power supply: 400 V, 50 Hz, 3 Ph.

Isolation transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKL 10 S ( RDRKL10S ) 0,34 kVA Prim. 3 x 380 V sec. 24 V DC 10 A 50 - 60 Hz Spare part for TRAUB TND300 ! used, with downstream three-phase bridge rectifier ! Dimensions: 165 x 155 x 160 mm

Beumer bar band 1360-680-430 + injection unit 30° 800-680-430 RA1262 Injection unit 30° consisting of a clock band and a triangular band. Scaffolding and cladding are made of profiled steel sheet. The drive is carried out by means of a gear edgear motor and belt drive. Without control and connections to upstream and downstream conveyors Technical data: Manufacturer: Beumer Year built: unknown Condition: good (used) Engine: fully functional Data Triangular Band Type: Injection unit 30° 800-680-430 Angle (injection): 30° Conveyor length (FL): 1360 mm Nominal/outer width (NB): 680 mm Usable width (NUB): 430 mm Wide transport belt: 393 mm Drive drum: dia. 74 mm Deflection roller: 63.5 mm Funding speed: 2.0 m/sec Engine power: 0.55 kW Data clock band: Type: Tape 1360-680-430 Function: Acceleration tape Conveyor length (FL): 800 mm Nominal/outer width (NB): 680 mm Usable width  ...

Isolation transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKL 30 K ( RDRKL30K ) 0.9 kVA Prim. 3 x 220 V sec. 24 V DC 30 A 50 - 60 Hz with downstream three-phase bridge rectifier ! used, tested ! Dimensions: 210 x 210 x 210 mm

Year of manufacture 2016 With over 40 years of experience, Polymac supplies extraction systems, in-mould labelling systems, handle machines and downstream automation for your pail and lid production. Extraction robot for large pails 10 - 20 litres

Isolation transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKG 40 KM ( RDRKG40KM ) 1,2 kVA Prim. 3 x 230 / 400 - 480 V sec. 24 V DC 40 A 50 - 60 Hz with downstream three-phase bridge rectifier ! Dimensions: 285 x 230 x 210 mm

Width 36 cm Built in 1990 Flat pile feeder 6 fold pockets in the parallel break section downstream knife shaft Shed display Price on request. We deliver and install worldwide!

Control transformer, three-phase control transformer, DC power supply SBA DGS Art.-Nr.: 211 - 306 423 W Prim. 3 x 25 - 0 - 25 - 400 - 480 - 575 V sec. 23.5 V DC 18 A 50 - 60 Hz 2 fuses 20 A ! with downstream three-phase bridge rectifier ! Dimensions: 210 x 190 x 190 mm

Professional strapping machine from a renowned German manufacturer, designed for high speed and trouble-free operation. -Strapping frame inside approximately: width 600 x height 500 mm. Height with press approx. 400 mm. -Up to approx. 40 straps per minute. -Adjusted bandwidth 12 mm. -Automatic belt ejection when strapping is released without packaged goods. -Wear-free force-controlled belt guide system. -Electronic heating temperature control. -Uncomplicated bobbin changing and threading system. -Integrated pneumatic press. -Potential-free contacts available for linking to upstream and downstream systems. -Wiring diagrams are available -The machine is height-adjustable or can be moved via castors. Control unit: -Selection of manual / automatic mode. -Adjustment options for multiple strapping and strapping position on the package. -Strip cutting in ...

Control transformer, three-phase control transformer, DC power supply SBA DGS Art.-Nr.: 211 - 306 423 W Prim. 3 x 25 - 0 - 25 - 400 - 480 - 575 V sec. 23.5 V DC 18 A 50 - 60 Hz with downstream three-phase bridge rectifier ! Dimensions: 205 x 190 x 140 mm

Pneumatic clutch-brake combination -pneumatically operated -with brake on the downstream side -Shafts: Ø 35 mm -Number: several couplings available -Price: per piece -Dimensions: 460/220/H325 mm -Weight: 50 kg/piece

• For turning and grouping folding boxes with 5th flap (suspension or display flap) and transfer to downstream machine, e.g. Pester PEWO-fold stretch-banding machine. • Infeed with 5th flap at the bottom in advance • Max. grouping of 6 products, each 3 products rotated by 180° • Infeed capacity max. 140 cartons/min. • Folding box dimensions min./max. (a x w x h) 30-64 x 20-39 x 82-156 mm, other dimensions after testing • Servo controller Elau PacDrive C200 with 1x PacDrive MC-4 • Operator terminal Pester Micro-Panel 10,4 • Programmable control system • Bypass function • 2.586 operating hours • Drive 400V/50Hz

Width 78 cm Year of construction: 2006 Round stack feeder RFH-82 upstream knife shaft 6 seam pockets in the parallel fraction automatic folding pocket adjustment automatic folding roller adjustment downstream knife shaft 2 folding swords in the cross-breaking area 1 more fold pocket after the 1st cross break Noise absorbing hood without display partially overhauled (new folding rollers) Machine condition: cleaned and tested Price on request. We deliver and install worldwide!

Width 78 cm Year of construction: 2001 Pallet feeder Tremat sheet cutting system 4 fold pockets in the parallel fracture section downstream knife shaft 2 folding swords in the cross-breaking area Noise absorbing hood Schwertfalzwerk VFZ 52.D Standing sheet delivery SB 66 MP. D without compressors / air supply Price on request. We deliver and install worldwide!

Used Automatic Filling Monoblock for Olive Oil 20 3 Brand Baratta 4500 BPH The machine is disconnected from the production line but is in perfect state It consists of 20 valves vacuum filling unit 3 head capping unit 1 size 35 24 aluminum Screw cap machine composed of the following equipment Bertoli oil 1lt 500ml 750ml raises and lowers electric filler raises and lowers electric capper no cap sensor upstream bottle downstream sensors overflow lack of bottles [...for more information send your inquiry to the seller.] refno: M177

rotary feeder RFH 82 1. folding unit 6 bags BUH-82 downstream cutterhead with lift function 2. folding unit 4 bags BUH-66 gatefold pocket movable stream delivery with press unit SPH-100 Latest software in 2021

Width 56 cm Year of construction 2004 Round Pile Feeder RFH Extended loading table 4 fold pockets in the parallel break section Window rebate pocket pneumatic Control unit ACC 2.4 Automation Kit II Automatic Fold Pocket Adjustment Automatic folding roller adjustment downstream knife shaft Shed delivery SKP with pressing station Delivery date: immediately Price on request. We deliver and install worldwide!

Width 66 cm Year of construction 2004 Pallet feeder Tremat Arc Cutting System 6 fold pockets in the parallel break section downstream knife shaft 2 folding swords in the cross-breaking section 1 additional fold pocket after the 1st cross break Control unit ACC 2.4 Window rebate pocket pneumatic Shed delivery SAK 66 Delivery date: immediately Price on request. We deliver and install worldwide!