dowel used for sale

Dowel hole drilling machine Brand: VITAP Type: ALFA 21 CLASSIC New machine - One boring unit 21 spindles - QUICK CHANGE SPINDLES - Pneumatic cylinder for horizontal/vertical positioning of the boring group (45 degreed and any intermediate angles) - Front/top caliper to obtain the same boring measure between horizontal and vertical position - Tilting side stops adjustable by metric scale and nonius and magnifying lens on each stop - 2 safety clamps inclined 4 degrees - Height regulation of the boring group by mechanical digital position indicator; - 6 positions turret to adjust the drilling depth (0-80 mm) - Automatic vertical-horizontal depth difference device (10 mms) - Drilling speed adjustment from the panel control - Strengthened steel structures for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropneumatic circuit by mean ...

Dowel Drill VITAP Row Hole Drilling Machine Type ALFA 21 Year of construction 2006 Drilling unit with 21 drills in 32 pitch Drilling unit pneumatically swivel 45° Distance between the first and the last spindle 640 mm Maximum drilling depth 70 mm Spindle revolutions 2800 rpm. Motor power 1.8 kW Operating pressure 6-8 bar Left and right adjustable stop on machine table With length stops Weight with pallet approx. 330 kg

New CNC drilling- and dowel inserting machine Brand: VITAP Type BLITZ 3.0 Blitz CNC drilling glueing and dowel inserting machine (axis X) 1300mm. Highly efficient and reliable thanks to a easy software. Ideal for JUST IN TIME production or mass production. Machine standard equipment: - Drilling head 3500 rpm - N °3 horizontal indipendent spindles - N° 3 vertical indipendent spindles - N °1 glue and dowels inserting unit - N °1 high capacity vibrator to feed the dowels - N° 1 low pressure pump for the glue Working area horizontal head: - X= 1300 mm - Y= 50 mm - Z= 50mm (vertical) - Z=25mm (horizontal) Combined drilling and driving unit for dowels: - Configurations of min. 6 x 25 mm and max. 10 x 40 mm are possible. - The desired dowel configuration must be specified when ordering. Sets for further dowel configurations are optionally availab ...

incl. various drills, long stops on both sides and 2 support tables with ball sleeves The sale is carried out on behalf of the customer from the current location, in the condition as existing, excl. Warranty.

Dowel and stair drilling machine GÖTZINGER RBS swivel with laser very good condition, the machine has been used very little and is as good as new, it comes from an educational institution it can be used to drill dowel holes and similar things the machine has a drill head type BKF-5 with 5 drill bits M10 female thread, the distance between the drill bits horizontally is 32mm, vertically it is 25mm the whole drill head can be swivelled 360° with degree display and different grids, a normal 2-jaw chuck can also be used You also get 3 drill bit holders, for drills with a cylindrical shank of 12 or 16mm, and for drills with an M10 external thread the machine table is 1100mm wide and 250mm deep, there is a stop at the front that can be lowered if necessary for the production of dowel connections there are 2 adjustable angle stops on the machine table, which can be adjusted with an  ...

Drilling and dowel insertion machine Gannomat model 280/284 with good equipment from first ownership: – Drill beam with 23 spindles, pitch 32 mm – 6 dowel insertion stations for Ø 8 mm, dowel length 25-50 mm – 1 pair of side stops – Stainless steel container for 5 kg of glue – Stainless steel container for 5 liters of water for rinsing – Fully automatic electronic control via foot valve with program selector switch – 5-stage glue quantity selector switch by means of time preselection by electronic control – Closed glue system with 6 bar glue pressure – Glue/water selector switch for flushing the glue system – Glue residue indicator indicator for glue container – Suction funnel Ø 100 mm – High pressure pump adjustable for glue pressure 6-24 bar – Mirror program electrically controlled – Special control 280-S2E for cycle time reduction � ...

Condition The machine has been used little and is in a well-maintained, fully functional condition. It is immediately ready for use. Sightseeing and pick-up A viewing and a test run are possible by appointment. A forklift is available for loading. The machine can be provided on a pallet. A forwarding company is located in the immediate vicinity and can be easily commissioned with the collection if necessary. Technical data 21 drilling spindles with 21 quick-change chucks Spindle spacing: 32mm Maximum drilling depth: 70 mm Max. drill shank diameter: 10 mm Swivel drilling unit (0°, 45° and 90°) for face and surface drilling 3 pneumatic workpiece clamps Foldable side stops with mechanical digital displays Foot pedal for clamping, drilling and loosening Distance between first and last spindle: 640 mm Spindle speed: 2,850 rpm Table size: 880 x 425 mm  ...

Gannomat Index 230 Trend Type: 470 Year of Make: 2005 CE CNC-controlled automatic drilling and insertion machine For the fully automatic drilling, gluing and insertion of dowels in woodworking. Working length 2300 mm, Workpiece length unlimited because it is open at the sides 4 stations drilling, doweling, glue Height adjustable from 10 – 37 mm with vibrating pot for dowels Single or multi-field operation Operation via screen Machine has been serviced every year and is in a in good working condition.

Automatic sawing, drilling and feeding machine Koch Type: SBD-B Year of Make: 1989 double-sided Working width 280 mm – 2500 mm for dowel diameters 8 and 10 mm right and left respectively: Saw, drill head with 3 drill bits spacing 20 / 25 mm, Dowel insertion for 3 dowels each also 3 drilling units from above and rear 2 drilling units from above with 3 vibrating pots for dowels Fault detection display Schleicher Elektronik Width adjustment via rotary switch Center crossbeam available for long parts Material transport by webbing Return conveyor belt at the bottom Dowels 10 mm in diameter, 40 mm long well-functioning condition

length: 1980 mm width: 670 mm height over floor: 850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used dowel drilling machine Ayen Type DB 1000-B23 for drilling operations in the production of dowel joints in woodworking. The machine features a working width of 720 mm, a maximum clearance of 820 mm and different drilling depths for vertical and horizontal machining. Technical data: Working width: 720 mm Max. clearance: 820 mm Drilling depth, vertical: 45 mm Drilling depth, horizontal: 120 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Scheer DB 5 dowel hole drilling machine for the precise and rapid drilling of dowel holes (horizontal and vertical) in solid timber and board materials. The machine is ideal for mass production in furniture manufacturing as well as for precise joints in interior fit-out work. Includes a comprehensive range of dowel bits. Technical data: Drilling spindles: 21 Pitch: 32 mm Passage width: max. 1,000 mm Swivel mechanism: pneumatic Fax: 07427 920050, Mobile: 016096624745, Machine No. 208695, Jan 2011, Cost price €1,000 D-89440 Lutzingen, Tel. 09074 1371, Fax: 09074 5516, April 2015, purchase price €500 Condition: Gebraucht Location: Tauberbischofsheim, Germany

horizontal boring - glue injection - dowel inserting Single drill and inserter which can be freely programmed Drilling depth manually adjustable Z-axis with manual setting Workpiece sizes: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/max: 10 / 60 mm max. workpiecewidth with middle fence on 2 fields: 600 mm, on 1 field: 1200 mm Middle fence with pneumatic rise/fall 6 vertical pressure units Double membrane glue pump 1:1 Glue viscosity 350 mPas Dowels: 8 mm x 30 mm, 8 mm x 35 mm Controlls: Powercontrol PC85 with Woodwop software

Machine designed for machining solid wood doors with frame and raised panels Workpiece dimensions Length 150 - 3000 mm Width 40 - 300 mm Thickness 20 - 60 mm Material: hard woods/soft woods Machine equiped with 2 working areas, including - 3 NC-axes X, Y, Z - telephone modem - 1 sawing unit - 1 horizontal boring unit - distance horizontal drill above table (Z):max. 40 mm - fixed workpiece table - central lubrication - CE package - max. workpiece length 2.400 mm KOCH Numeric with 3 NC-axes Positioning control with PC Pentium CPU Operating system Windows XP Professional: english 15? Touchpanel VGA + Touchscreen by means of LVDS connection USB-connection on PC and on Touchpanel Seriel and parallel interface on the PC Hard disk 2,5? Input of machine commands and motor control through the Touchpanel PS2 connection for external keyboard Office PC software Stretched machine bas for max. workp ...

Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC

With vibratory feeder and digital controller Auction-ID: A1-48377-22

Bore diameter: , mm Number of heads horizontal: , St. Number of heads vertical: , St. 2 pcs. Götzinger drilling and milling centers ---------------------------------------- For sale on behalf of a customer! 2 identical machines: One machine for left parts and one for right parts. The machines can also be used individually. The machines were controlled via window manufacturing software, but can also be operated via the machine software. Both machines are equipped identically: - Left and right drilling units for front-end drilling. - 3 units for drilling and milling for longitudinal machining. - Parts are loaded once, and the unit carrier then moves for the various machining operations. Installation length per machine approx. 6 m. Individual sale possible: Price per machine 10,000 Euro See the enclosed PDFs for more information. The data for this ad was created with ModulMWS - the softw ...

weight max.: 1 t stroke: / mm clamping width: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

\"Eccentric connector drilling / cup belt drilling Connector Boring Hole Row System / Frame Drilling 4 clamps / 4 hold-down devices - meanwhile + overhaul and sealed! Technical data: Motor: 1.5 kW Spindle speed: 2800 rpm Max. passage between side stops: 750 mm Working height: 850 mm Clamping height max. workpiece thickness: 100 mm Max. hole row position dimension: 300 mm Tool shank diameter: 10 mm Weight: approx. 390 kg Space requirement (depth width height): 115x120x125 PRICING IN A FUNCTION-TESTED, PARTIALLY REFURBISHED CONDITION, SALE WITHOUT WARRANTY! Data are taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: it is expressly pointed out that this lot only corresponds to the scope of the product description. If objects can be seen in the photo that are not expressly listed in the lot description, they are not  ...