137,086 used machines on RESALE, but how to find them? Machine Search
6000 l container made of V2A double jacket for sale from location Very good condition, straight from production!
pressure: 160 t distance between columns: 850 mm stroke: 150 mm table surface area: 850x650 mm total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2,5 x 2,5 x 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Builder: HAAS Model: 700/1500 HDWV-D Motor: CAT C9 300 HP Work Data: W. 6.850 mm x L. 2.530 mm x H. 2.700 mm Operative Data: W. 8.700 mm x L. 2.530 mm x H. 3.200 mm Year: 2011 Hourly Production: 30 t/h Rotor: 2 Pz (TWIN SHAFT) Rotor Data: L. 1.500 mm x D. 700 mm Rotor Tools: 7/6 TOOTH per ROTOR + 4 TOOLS Weight: 19.000 Kg
Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg
Here are the technical data of the offered machine: Technical data + information: • No-load speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Starting press speed 5–15 mm/sec • Table size/heating plate size 600 × 600 mm • Plunger size/heating plate size 600 × 600 mm • 2 heating plates, electrically heated, up to 250 degrees – as OPTION • Total size approx. 2000 × 1000 × 2800 mm height • OIL temperature monitoring • Automatic lubrication • Free positioning of the plunger • SICK/LEUTZE light barriers 14.1 mm on the front • Circulating oil cooling • Pressure holding valve 0 to 1800 sec. • Rear monitored door • Pressure adjustment from 30 T to 120 T • Travel limitation either by pressure or position • Programming set-up mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in the wall ...
Inv. Num. : 6701 Type: 4000 kN Producer: Hydraulico Created: 1977 Parameters: Control system: SIEMENS SIMATIC OP Compressive force: 4000 kN Stroke: 800 mm Table height: 680 mm
Inv. Num. : 6700 Type: 3000 kN Producer: Loire Created: 1992 GO 2008 Parameters: Control system: SIEMENS SIMATIC OP17 Compressive force: 3000 kN Table length: 2495 mm Table width: 1505 mm Maximum distance between the table and the ram (when the ram is low): 1200 mm Stroke: 800 mm Working speed: 64 mm/s
SPINNER TTC 300- 52 SMMCY CNC Lathe YOM 2012 Twin-opposed-spindle, twin-turret lathe Control FANUC 31iT Swing diameter 400 mm Max. turning dia ~200-250 mm Max. turning length 400 mm Travels: X1 180 mm, X2 110 mm, Z 450 mm, Y +40/-40 mm Rapid traverse: X1 15 m/min, X2 15 m/min, Z 24 m/min, Y 15 m/min With C-axis Main Spindle 1: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Spindle bore 52 mm Spindle speed 0-5000 rpm/ 19 kW Performance Pmax 23,5 kW Torque 150 Nm Spindle nose A6/DIN Sub-Spindle 2: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Can be moved on a slide to take over spindle 1 Spindle speed 0-7000 rpm/ 8 kW Performance Pmax 13,8 kW Torque 189 Nm Spindle nose 100 mm Turret 1: At the top of the ...
Extraction connection, protective screen Auction-ID: A1-50476-94
Compounding - granulation line, consisting of: Extruder twin screw synchronization, drive 31 kW Segment screws and barrels, water-cooled Screws 2x Ø 35 mm – 44 L/D 1x degassing zone (atmospheric) 1x degassing zone (vacuum) 1x side dosage Screen changer double piston type K-SWE 101 with hydraulics Switchboard Water bath, granulator, etc. optionally also available on request.
Profile Machining Center Machining length approx. 8,500 mm, max. profile size 300 x 200 mm, Travel XYZ = 9,300 x 1,000 x 800 mm, Sawing unit (mitre cuts), 4-axis drilling/milling unit (16 kW, 18,000 rpm), tool changer 24-fold option pendulum operation, option Clamping element displacement, preparation Flowdrill, , safety enclosure, BECKHOFF control panel (programming software CamQuix), refrigeration unit IDEA 16CCM-50-A-F-3 (No. C2019010009, year of construction 2019), Control cabinet, machine under power in production use Original price 176.500 EUR
Cylinder pneum. kpl. for Poly Clip FCA 3430,3430-18 ,3463 ,FCA 120,160 - NEW order no. 150390 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT No.: PL547-17-47-669 Phone 0048/33 812 58 60 fax. 0048/33 812 58 36
Key data: 400 t, 800 mm
Oil-hydraulic double-column press 400 T with sliding table Press type: Double column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. 4000 kN Free tear-off force max. 400 kN Print build-up time Closed tool steel on steel Max. 4 sec. Dimensions: 3,800 mm long and 4,475 mm wide Max. opening width 800mm Stroke 800mm Table height above floor 1100mm Height above ground (height) approx. 4300 mm Hall height min. 5500 mm Parallel deviation at 20°C +/- 0.1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of the press without consumables and table top approx. 28 tons Press table Table size 1500x1500 mm Velocities Quick closing at 100 mm sec. Pressing speed 8 – 3 mm sec. Acoustic pressure Sound pressure level, measured at a height of 1.5m on the control pane ...
Saw blade diameter: 2x400mm, max. cutting length: 4000mm, cutting angle: +/-45°. Documentation available. On-site inspection is possible.
Diameter 100, 180, 230 Auction-ID: A1-50663-1768
Condition: Workshop overhauled, ready for demonstration and use, tested The DISKUS DDS 457 II CL was completely dismantled, cleaned, defective parts replaced and functionally tested. Specifications Grinding spindle: 2 pieces vertical Grinding process: Continuous process Workpiece width up to 60 mm Max. workpiece height 1-60 mm Grinding wheel diameter: 457 mm Grinding wheel rotation speed 24 m/s Workpiece feed 25 to 250 mm/min Drive power grinding wheel motor 2 x 15 kW Total drive cable approx. 35 kW Machine weight approx. 3.7 t Total space requirement approx. L x W x H 1.4 x 1.0 x 2.7 m Accessories: Replacement flanges – Errors, modifications and prior sale excepted –
Universal Rotor Shears UC 1500 Power 2x55 kW Cutting unit ejection opening: (width x length) 1124 mm x 1520 mm Rotor shaft speed 1: 16 rpm Rotor shaft speed 2: 16 rpm Knife width: 70 mm Number of Knives-4 EZN Infeed Lugs Incl. hopper, pusher without hydraulic unit
grinding wheel diameter: 150 mm no. of working stations: 2 Stück total power requirement: 0,25 kW motor speeds:: 2900 min 1 Workshop grinding machine 0.25 kW, 400/3 V, 50 Hz., 2900 rpm, Equipped with normal corundum grinding wheels 150x25x51 mm, grain 36 PQ and 60 M, with closed, adjustable steel protective hoods and workpiece supports Includes cable with CEE plug 2 pieces of eye protection shields, size 1 140 x 150 mm, complete with bracket, €60.00 Option: - In stand version Euro 1,192.00 net - With electronically controlled countercurrent brake which the grinding wheels after switching off brakes to a standstill within approx. 3 seconds, Emergency stop mushroom button, as a table machine Euro 1,665,-- net - In stand version with brakes Euro 2,042,-- net ? The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width 130mm Auction-ID: A1-47367-3501
a double softening system, Fabr. Wabs GmbH, type Ecotrol Twin 320, built in 2022, used Technical data: Manufacturer: WABS GmbH Dresden Model/ Type: Ecotrol Twin 320 Serial Number: 6091-12 Resin filling: 80 liters Operating pressure: 3-8 bar Year of Make: 2022 The device is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are understood as net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take them back. The offers are subject to change, subject to error and subject to a possible intermediate sale. Our terms and conditions also apply to every sale, to which we e ...
Key data: 40 mm, 40 , 600 U/min
Material: PE, PP, PS, ABS, Year of construction: 2000 Capacity: approx. 100 – 300 kg/h Screw diameter: 2 x Ø 40.0 mm L/D: 40:1 Propulsion: 110 kW (DC) more details: synchronous, degassing with vacuum pump, screws and cylinders segmented, Strand nozzle, water bath, strand granulator. NEW control cabinet for heating and motor control (Siemens S7, touch screen) Optional: Side loading
Nesto double shaft paddle mixer with lifter for 200 liter meat bins, type: MIX MAXI-450, serial number: 1030, year of construction: 2026, 400 V, 3 Ph, 4 kW, weight: 620 kg, volume: 450 liter, total dimensions: 2000 mm x 610 mm x 470 mm. Never used.
Nesto double shaft paddle mixer, type: MIX MAXI-200, serial number: 2014, year of construction: 2024, 400 V, 3 Ph, 50 Hz, weight: 300 kg, volume: 200 liter, dimensions: 1450 mm x 700 mm x 1500 mm. Never used.
PolyClip ICA 8700 in working condition as back from customer
Fire water tank, rainwater tank double-walled steel tank with a volume of 30,000 L Dimensions: Ø 2.50 m × 10 m long
Particulate filter probably needs to be cleaned Auction-ID: A3-46113-5817
Unused with warranty. Auction-ID: A3-46113-17124
Key data: 600 mm, 45 °
Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg
Key data: 600 mm, 20 °
Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg
Key data: 17 mm, 40 , 1200 U/min
Kategorie / Category: Twin-screw extruder / Twin-screw extruder Nummer / Number: DE27684 Manufacturer / Manufacturer: Leistritz Typ / Type: ZSE 18 HPe Baujahr / Year: 2009 Capacity: approx. 40 - 60 kg/h Motor: 9.4 kW AC max. screw speed: 1,200 rpm Screw diameter: 2 x Ø 18.8 mm L/D: 40:1 Material: PE, PP, PS, ABS + fillers // more details: synchronous, atmospheric degassing, segmented screws and barrels // Control: MacromateXX Siemens with visualization //
we sell new sheet pile double planks, manufacturer Arcelor Mittal, 11 pieces with lengths from 4.60 m to 6.20 m, Weight per double screed 145 kg
SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF - volt. 380/50 - sn 772 - year 2003
Cutting depth:70 mm engine output:12.4 A, 220/380 V , 2 x 6 kW working length:2500 mm dimensions of the machine ca.:3900 x 1100 x 1000 mm weight:1500 kg
pressure:60 t distance between columns:650 mm stroke:220 mm distance table/ram, max. stroke up, adjustment up:410 mm table surface area:600 x 525 mm hole in the table:110 mm table height over floor:900 mm side window:200 mm ram surface:560 x 490 mm power requirement:15,0 kW dimensions (WxDxH):1,9 x 1,3 x 2,7 m foundation pit:not necessary
SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E – CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF2 - nc ISAC - perimetral net - volt. 380/50 - year 1996
maximum number of results exceeded
please refine your search
100 € 
