double mitre used for sale

Frequency converter, frequency inverter, drive converter, controller, variable speed drive, single motor module, double motor module -Manufacturer: Siemens, Sinamics Double Motor Module -Type: 6SL3120-2TE21-8AA0 A5E33512929 FS: D -Input: DC 510-720 V 43 A -Output: 3 AC 0-480V 18A/18A 0-550Hz A -Number: 3x module available -Price: per piece -Dimensions: 480/50/H270 mm -Weight: 7.9 kg/piece

Frequency converter, frequency inverter, drive converter, controller, variable speed drive, single motor module, double motor module -Manufacturer: Siemens, Sinamics Double Motor Module -Type: 6SL3120-2TE13-0AD0 -Input: DC 510-720 V 7.2A -Output: 3AC 0-480V 3A/3A 0-550Hz A -Number: 8x module available -Price: per piece -Dimensions: 420/50/H270 mm -Weight: 4.6 kg/piece

Frequency converter, frequency inverter, drive converter, controller, variable speed drive, single motor module, double motor module -Manufacturer: Siemens, Sinamics Double Motor Module -Type: 6SL3120-2TE21-0AD0 -Input: DC 510-720 V 22 A -Output: 3 AC 0-480V 9A/9A 0-550Hz A -Number: 10x module available -Price: per piece -Dimensions: 420/50/H270 mm -Weight: 4.8 kg/piece

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Filter testing, filter test system, filter measurement system, filter test system, dosing pump double generator -Manufacturer: Science Purge, Double Generator Dosing Pump with Accessories -Type: SC 1801 -Individual components: see photos -Submission/Price: complete -Dimensions: 430/300/H305 mm / 225/175/H165 mm / 410/340/H185 mm -Weight: 11.1 kg / 1.5 kg / 6 kg

Double girder traveling crane, bridge crane, overhead crane, assembly crane, workstation crane, ceiling-mounted traveling crane, traveling crane, crane system -with 2x electric cable winches -Load capacity: 2 x 1600 kg -Bridge load capacity: 3.2 tons -Wingspan: 6.4 m -Hallway service -Dimensions: 2000/6400/H1000 mm -Weight: approx. 2000 kg

Manufacturer: IMA, Type: Maschinenstrasse Combima, Control: IMA, Work piece width min-max mm: 1 Maschine 250-1500, Min.-max. workpiece length in mm: 2 Maschine 250-2600, Min.-max. workpiece height in mm: 10-50, Feeding: Ja, Machine no 1: yes, Angular transfer: yes, Machine 2: yes, Drilling machine no1: no, Destacking unit: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Nockenabstand mm: 850, Coil magazine: 6-fach, Feeding speed max m/min: 10-30, Premilling: yes, Strip magazin: no, Kantenmagazin: yes, Mitre stations: yes, Trimming saw: yes, Büdigfräsen: yes, radius milling: yes, Fasefräsen: yes, Contour milling type: MFA, Radius scraper: yes, Flat scraper: yes, Spraying device: yes, Maschine vorführbereit: yes, Year :2000

: neu : ca. 4 Monate ab Auftragse : Italien : 164500 € : 3109.05 € : 260 to : 500 mm : 1400x1000 mm : 600 mm : 75 mm/s : 5 mm/s : 60 mm/s : 22 kW : 2800 mm : 1650 mm : 2750 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 123000 € : 2324.7 € : 170 to : 500 mm : 1200x700 mm : 600 mm : 110 mm/s : 7 mm/s : 70 mm/s : 19 kW : 2700 mm : 1600 mm : 2650 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 78000 € : 1474.2 € : 85 to : 500 mm : 900x600 mm : 600 mm : 105 mm/s : 7 mm/s : 58 mm/s : 7.5 kW : 2250 mm : 1150 mm : 2400 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Torwegge, Type: 8010, Year: 1998, Maschinensteuerung: yes, Motore Maschine 1: 4 +4, Conveyor: 1 Kettenmaschine, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 6-30, Working width min-max mm: 80, Machine with controlled dogs: yes, Cam distance mm: ca.500, Feeding speed min-max m/min: 10-40, Feed stepless: yes, Overall milling units: 4+4, Moulding units swivel-mounted: 4+4, gesteuerte Fräsaggregate: no, 1st milling unit kW / rpm: 4,5/5800, 2nd milling unit kW / rpm: 4,5/5800, 3rd milling unit kW / rpm: 4,5/5800, 4th milling unit kW / rpm: 4,5/5800, Year :1998

Manufacturer: Homag, Type: FL 20/06/30/S, Year: 1995, Maschinensteuerung: Homatic, Machine no 1: Quermaschine, Motore Maschine 1: 5, Magazine: yes, Conveyor: Kette, Work piece width min-max mm: ca.220, Min.-max. workpiece length in mm: 220-3000, Min.-max. workpiece height in mm: 10-40, Machine with controlled dogs: yes, Cam distance mm: ca.400, Feeding speed min-max m/min: 6-40, Feed stepless: yes, verängerte Kette mm: yes, Nockenaushebung: no, Magazine: yes, Overall milling units: 10, Moulding units swivel-mounted: 5+5, gesteuerte Fräsaggregate: no, 1st milling unit kW / rpm: 6,6/5800, 1. swivelling controllable: schwenkbar, 2nd milling unit kW / rpm: 6,6/5800, 2. swivelling controllable: schwenkbar, 3rd milling unit kW / rpm: 6,6/5800, 3. swivelling controllable: schwenkbar, 4th milling unit kW / rpm: 6,6/5800, 4. swivelling controllable: schwenkbar, 5th milling unit kW / rpm: Freipl ...

Manufacturer: Homag , Type: Power FR 20/09/15/L/Q1, Year: 2007, Control: Powercontrol Homag, Conveyor: Nockenkette, Work piece width min-max mm: 350, Min.-max. workpiece length in mm: 220-1500, Min.-max. workpiece height in mm: 10-30, Machine with controlled dogs: yes, Cam distance mm: ca.500, Feeding speed min-max m/min: ca.60, Feed stepless: yes, verängerte Kette mm: yes, Overall milling units: 5, Moulding units swivel-mounted: 5, gesteuerte Fräsaggregate: keine, 1st milling unit kW / rpm: 6,6/5850, 1. swivelling controllable: yes, 2nd milling unit kW / rpm: 6,6/5850, 2. swivelling controllable: yes, 3rd milling unit kW / rpm: 6,6/5850, 3. swivelling controllable: yes, 4th milling unit kW / rpm: 6,6/5850, 4. swivelling controllable: yes, 5th milling unit kW / rpm: 6,6/5850, 5. swivelling controllable: yes, Year :2007

Manufacturer: Ima zweieinseitige Maschinen in Verkettung, Type: Combima I, Year: 1999 Überholt 2010, Control: IMA, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Infeed table: Rollgang mit Drehstattion, Min-max edge thickness mm: 0,5-3,0, Min-max strip length mm: 300, Min-max protrusion of workpiece mm: 38, Min-max feed m/min: 8-40, Velängerte Kette mm: yes, Cam distance mm: ca.450, Premilling: yes, Profile milling: yes, Machining cracks: Zerspanen, Fine milling: yes, IR zone: yes, Coil magazine: 4-fach, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: MFA, 2 motors: yes, Servo copying: yes, Rolling chain: yes, Bonding part EVA: yes, Vertical grooves: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, Flat scraper: yes, Servo copying: yes, Year :1999 Überholt 2010

Manufacturer: Homag, Type: FL 20/07/15/S, Year: 2003, Destacking plant: PC 21, Vereinzelung: Woodline, Software: yes, Maschinensteuerung: 220 - 1500, Machine no 1: 220, Motore Maschine 1: 8 - 90, Machine 2: yes, Motore Maschine 2: 500, Kantenversiegelung: 10- 40, Conveyor: yes, Trittschal: max 110, Einlegstattion in Kartons: 25 mm, Min.-max. workpiece height in mm: 11, Working width min-max mm: yes, Working hight min-max mm: 6,6, Machine with controlled dogs: yes, Cam distance mm: 6,6, Feeding speed min-max m/min: yes, Feed stepless: 11, Min-max protrusion of workpiece mm: yes, 3 Engine power kW: Mittelschnitflasch Arbeitsbreite 300 - 500 mm, Year :2003

Manufacturer: IMA, Type: FBA/II/R80/660 F, Year: 1992, Control: IMATRONIC, Work piece width min-max mm: 220-2000, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 8-45, Working widht max mm: 2600, Machine with controlled dogs: yes, Cam distance mm: 320, Extended chain conveyor: 850, Scoring saw controlled: yes, kW / U/min: 1,5/6000, 1st milling unit kW / rpm: 4,4/6000, 2nd milling unit kW / rpm: 3,3/6000, 2. swivelling controllable: yes, 3rd milling unit kW / rpm: 3,3/6000, 3. swivelling controllable: yes, 7.Profilschleifaggregat Stk.: 4 pro Seite, 8.Flächenschleifaggregate Stk: 2, 9. Bürstenaggregat: 2, Aggregats per side - total: 9, Sawing unit: 1, Hersteller Prägestationen: 3, Folienprägestationen: 2, Prägehöhe mm: 5-30, Year :1992

- Maximum dimensions of the workpiece to be cut: approx. 4100 x 210 x 120 mm. - One head is fixed and the other movable with movement by means of a handwheel with mechanical length indicator. - Adjustable heads from -45° to +45°. - Heads tiltable up to 45°. - Cutting groups: disc diameter 400 mm, motor 2.20 KW-2830 rpm. - 2 vertical and 2 horizontal pneumatic grippers. - Pneumatic drive. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-14

: neu : ca. 4 Monate ab Auftragse : Italien : 71300 € : 1347.57 € : 60 to : 500 mm : 800x500 mm : 600 mm : 120 mm/s : 8 mm/s : 58 mm/s : 5.5 kW : 1100 mm : 1100 mm : 2350 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 104000 € : 1965.6 € : 125 to : 500 mm : 1200x700 mm : 600 mm : 115 mm/s : 7 mm/s : 70 mm/s : 15 kW : 2550 mm : 1500 mm : 2600 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1500 mm Free frontal opening L-R: 3800 mm Free lateral opening F-B: 1450 x 1100 mm Table surface area : 3500 x 1900 mm Slide area: 3500 x 1900 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Number of strokes: 7 - 18 s.p.m. Required power: 120 kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

Key data: 72 mm, 28 , 50 U/min

Parallel twin screw extruder Cincinnati ARGOS 72R-28D Output capacity: max. 400 kg/h (depending on material and processing conditions) Power main drive: 47 kW (AC motor) Screw diameter: 72 mm, L/D = 28 Screw speed: max. 50 rpm Screw geometry for u-PVC pipe or technical profiles Original screws and barrels in very good condition 12 x Tool heating zones 3-ph/5-pin CEE 32A/10.5 kW 1 x adapter heating zone 1-ph/5-pin CEE 32A/5.5 kW 13 x TC Type J 16 mm Tuchel C70B 3-pin 4 m Incl. mass pressure and temperature sensor Successor interface: Interface 1 (analogue) and Can Open Bus 3 x Add on Plasticolor 0–10V Machine control Cincinnati EXc ProXP Horizontal conveyor incl. material hopper Total connected load: 184 kW Dimensions (L x W x H): 4,018 x 1,250 x 2,463 mm Weight: 4,700 kg Condition: used, overhauled & functionally tested

Machine: Double-head chainsaw Blades: 2x Ø500 mm widia, bore Ø32 mm (reducing) Tilt: 90° / 45° / 22.5° + intermediate positions Blade motors: 2x 2.2 kW (3 HP), 2800 rpm, three-phase 230/400V-50Hz Blade feed: pneumatic with hydraulic adjustment Cutting capacity: min. 305 mm / max. 4-6 m depending on version Heads: 1 fixed + 1 mobile (electronic positioning) Clamping: 2 vertical vices + 3 pneumatic horizontal vices Equipment: 2.5 m roller conveyor, nebulization lubrication, protective boxes, waste collection bin Order: PLC, Protected Membrane Keypad Operating pressure: 7 bar Auction-ID: A1-45443-22

equipped with 2x drawer cabinet, Please note! Chairs + accessories on and around the desk not included Auction-ID: A1-43992-352

equipped with 2x drawer cabinet, Please note! Chairs + accessories on and around the desk not included Auction-ID: A1-43992-353

: neu : ca. 4 Monate ab Auftragse : Italien : 65000 € : 1228.5 € : 35 to : 500 mm : 800x500 mm : 600 mm : 125 mm/s : 9 mm/s : 68 mm/s : 4 kW : 1100 mm : 1100 mm : 2300 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- The surplus collection transfer is NOT included (marked in photo number 2). - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-99

- 2 oscillating heads. - The 2 tables work in alternative cycles. - Table measurements: 440 x 400 mm. - Tables tiltable ± 15°, adjustable in height and depth. - Vertical adjustment of the tables approx. 100 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-32

Range : ø 10-40 mm plain pipe; or 40-110 mm corrugated pipe, 20 m/min max. Remark : ID 450-600mm; OD 1200mm Max Width 100-400mm

Key data: 380 mm

Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual length adjustment with digital display E111 Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation Machine is dismantled on squared timber

Key data: 420 mm

Saw blade diameter: 420 mm Cutting length: 3,000 mm Automatic length positioning and angle adjustment via E 255 control Digital angle displays on both units Rollable and fixed material support Minimum quantity spraying device Weight: approx. 1500 kg

TECHNICAL DATA: Sanding belt length: 2800 mm Installed power: 2 hp

X-axis travel 420 mm Z-axis travel 1100 mm VDI 50 tool holder 2x ASA 8 spindles LH Head Working Hours: 16624 Working hours head RH: 16272 With loading table diameter: 1700 mm Equipment: 2x automatic arms for loading and unloading workpieces Unloading roller conveyor dimensions: 3000x530 mm Tools and spare parts included Assorted quantities and types, as shown in the photo. The total availability of individual visible elements is not guaranteed. Auction-ID: A7-45181-40

Equipment: 7178791 Manufacturer: Stabau Type designation: S7DPK30TG-S-01 Year of Make: 2017 Condition description: Hydraulic hoses damaged Double pallet clamp, FEM 3 Load capacity: 3000 kg Forks: Extension forks 1340–2350 mm, bolted Fork carriage width: 1670 mm AA: 1930 mm AI: 830 mm ZA: 580 mm ZI: 170 mm Auction-ID: A7-45634-168

The EPC 9/2 from HEKA Elektronik is a two-channel patch clamp amplifier that enables precise measurements in the voltage clamp and current clamp. The device is known for its exceptional signal quality, low noise values and stable performance – even during long test series. This model is particularly suitable for applications where simultaneous measurements on two cells or two independent membrane patches are required. --- Technical Highlights & Features: • Two independent channels (Double Patch Clamp) - Each channel with its own inputs for: - Probe (patch electrode) - Test input - External stimulus - Voltage and current monitor - Dual filter units Untested from Laboratory Closure Auction-ID: A7-45427-15

Equipment: 7767492 Manufacturer: Stabau Type designation: 57-DPK 25-S-BRO2 Year of Make: 2020 Condition description: Paint damage Double pallet clamp, FEM 3 Load capacity: 2500 kg B-forks, bolted, 1600 mm AA: 1990 mm AI: 1790 mm ZA: 565 mm ZI: 235 mm Auction-ID: A7-45634-166

1 pc. universal whetstone (20mm wide) 1 pc. whetstone for HSS steel (40mm wide) Grinding wheel diameter 150 mm Grinding wheel width 20 + 40 mm Mounting diameter 12.7 mm Connection voltage 230 V Motor power 0.25 KW Weight 16 kg Dimensions L x W x H 0.37 x 0.2 x 0.24 m Condition: never used / new (5) Auction-ID: A1-45681-784

Angle-adjustable table, disc diameter approximately 790mm. Auction-ID: A1-45188-172

Double bench grinder: Grinding grit: 36 and 80 Grinding wheel diameter max. 150 mm Grinding wheel width 25 mm Mounting diameter 32 mm Connection voltage 230 V Motor power 0.5 KW Condition: never used / new (5) Auction-ID: A1-45681-789

Double bench grinder: Grinding grit: 36 and 80 Grinding wheel diameter max. 200 mm Grinding wheel width 32 mm Mounting diameter 30 mm Connection voltage 230 V Motor power 0.9 KW Condition: never used / new (5) Auction-ID: A1-45681-708

2 toilets; 2 sinks; ventilation grille; ventilation unit; light; toilet paper holder holder; lockable; 220v; drainage; forklift slots; crane hooks; 5891 Auction-ID: A1-45506-16

Information: - Special package free shipping - within Germany (without islands) - Complete set fence package 375 m - Height 2,030 mm - Thickness 6/5/6 mm - Galvanized + RAL 7016 - Anthracite grey coated - 150 double rod mats W: 2,510 x H: 2,030 mm 6/5/6 mm MW 50 x 200 mm RAL 7016 - 151 pieces of fence posts 60 x 40 x 2 x 2,200 mm with floor recess approx. 600 mm for concreting - 151 pieces hook cap (1 piece per lot) - 453 pieces U-bracket sets (3 pieces per post) Seller's Note: - It is new! - Forklift available on site for easy and fast charging. - Suitable gate system (1.25 and 3.00 m passage width) possible on request for an extra charge - Suitable privacy screen available on request for an extra charge - Special quantities from 75 m upwards possible on request for an extra charge - Material available on request in hot-dip galvanized and RAL6005 - Material heights ...

A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible.

Information: - Special package free shipping - within Germany (without islands) - Complete set fence package 900 m - Height 2,030 mm - Thickness 6/5/6 mm - Galvanized + RAL 7016 - Anthracite grey coated - 360 double rod mats W: 2,510 x H: 2,030 mm 6/5/6 mm MW 50 x 200 mm RAL 7016 - 361 pieces of fence posts 60 x 40 x 2 x 2,200 mm with ground recess approx. 600 mm for concreting - 361 pieces hook cap (1 piece per lot) - 1,083 U-bracket sets (3 pieces per post) Seller's Note: - It is new! - Forklift available on site for easy and fast charging. - Suitable gate system (1.25 and 3.00 m passage width) possible on request for an extra charge - Suitable privacy screen available on request for an extra charge - Special quantities from 75 m upwards possible on request for an extra charge - Material available on request in hot-dip galvanized and RAL6005 - Material heights of  ...

angle: 0° - 90°; max cutting length: 1370 mm; easy handling and quick mounting on the carriage of the saw for fast and stepless production of miter cuts on narrow and short workpieces at any angle from 0° to 90

PSS Svidnik a.s. double shaft paddle mixer, type: SM 700, serial number: 07, year of construction: 2014, 6 kW, volume: 700 liter, weight: 1750 kg, dimensions: 2350 mm x 1400 mm x 2280 mm.

Two-disc grinder Estimated weight: 30 kg Approximate dimensions: 400x800x1200 mm Auction-ID: A7-44996-145

Three-phase asynchronous motor, 2800 rpm, 220 V.Serial: 143 Estimated weight: 75 kg Approximate dimensions: 1200x800xh1500 mm Auction-ID: A7-44996-146

Double grinder: 2800 rpm Estimated weight: 75kg Approximate dimensions: 1200x800x1300 mm Auction-ID: A7-44996-144

Renault Traffic Load capacity: 735 kg Towing capacity: 2 Ton Light Cargo Euro 5 Towbar Double Cab Sliding door Electric windows Electrically adjustable exterior mirrors Central locking Radio/CD Cup holders Roof racks Non-smoking car Auction-ID: A3-43367-5020

with hydro system for trailer - double (working) air conditioning - automatic transmission - neat truck that starts, brakes and drives smoothly - very slight (repaired) damage at the rear (see photos) and slight wear of the driver's seat. Auction-ID: A3-43367-10793