double mitre used for sale

BALLISTRINE- linear profiler,/shaper-double sided 10 hp cutter head per side- follows your templates - shapes both sides- 9' table- hydraulic feed- material hold downs- $7,800

It is used in rubber and plastics mixing, warming mixing, sheeting mixing, etc. III Equipment specification XK400×1000 mixing mill 1. Main technical specification NO. Item Main technology data and feature A Main technology data 1 Roll diameter 400mm 2 Roll working length 1000mm 3 Roll linear speed Front:14.85m/min Rear:18.85m/min 4 Speed ratio of rolls 1:1.27 5 Max roll space 10mm 6 Compound feeding capacity 25kg-35kg 7 Motor power 37KW,n=980r/min，IE3 8 Dimensions 4400X1710X1850mm 9 Gross weight 8500kg B Feature of main machine 1 Roll size(mm) Ф400×1000 material alloy chilled hard cast iron, surface hardness HS70±2,Surface roughness: Ra0.2 Bearing type Adopt the aligning roller bearing, copper pressure ring, bearing taper 1:12 type Front roll is drilled roll and rear roll is drilled roll, can pass cooling water, e ...

Double D Rack oven 2006, stainless, single rack oven, timer and temperature controls, with fan and light, 45Kw, 3Ph

Euro taxes are payed, Rubber mixing mills for sale. Mills are technicaly like new, worked only in demo regime. Price includs test before loading, loading costs. 1 Roll diameter 400mm 2 Roll working length 1000mm 3 Roll linear speed Front: 14.85m/min Rear:18.85m/min 4 Speed ratio of rolls 1:1.27 5 Max roll space 10mm 6 Compound feeding capacity 25kg-35kg 7 Motor power 37KW,n=980r/minIE3 8 Dimensions 4400X1710X1850mm 9 Gross weight 8500kg

automatic double mitre saw OMS SALVARANI INVINCIBILE OK 330 CE standard : Yes n.02 motors . power Hp 3 each one blades diam.mm.330 max. useful cutting length mm.3000 max. useful cutting width 90° mm. 165 max. useful cutting width 45° mm. 115 max. useful cutting heigth mm.115 volt. 380/50 weigth kgs.650

Cutting capacity round / square 90°: 255 mm / 210 x 210 mm 90° flat cutting area: 310 x 210 mm Cutting capacity round / square 45 ° R: 220 mm / 210 x 210 mm Section flat 45 ° r: 220 x 200 mm Cutting capacity round / square 45 ° L: 230 mm / 200 x 200 mm Cutting capacity 45 ° L: flat 230 x 200 mm Cutting capacity round / square 60 ° R: 135 mm / 135 x 135 mm Section flat 60 ° R: 135 x 135 mm Working height: 930 mm Band saw blade dimensions: 2750 x 27 x 0,9 mm Cutting speed: 35 / 70 m / min Coolant pump: 100 W S1 motor power output 100%: 1.5 kW Motor power S6 40%: 2.2 kW Voltage: 400 V Machine dimensions (L x D x H): 2000 x 1250 x 1900 mm Approximate weight: 350 kg Features: -Professional band saw for General workshop use, fitters... -For cutting of hollow profiles and full materials, stainless steel, tool steel,... -Twist-free, heavily dimensioned saw frame mad ...

Double mitre saw Omga for glazing beads Ready for pickup, price EXW The machine is in good condition, operational. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Double mitre saw Hoffmann type MS 35 Specifications: Cutting width (mm): 85 Cutting height (mm): 85 Motor (kW): 2 x 2,2 Horizontal clamp: 1 set Material supports: 1 set

Double mitre saw STRIFFLER-STRIMA 2750 Year of construction: 1992 S/N 289 Manufacturer: Striffler GmbH Germany Cutting width 2,200 mm Cutting height at 45° 240 mm 2 saw motors 1.1 kW, 2800RPM / 380 V 50 Hz Saw blade 250mm Rear-cutting design Width adjustment by electromotive Saw feed pneumatic Length adjustment by handwheel Pneumatic clamping device Length 2940 mm Width 1,100 mm Height 1,220 mm Weight approx. 360 kg

Double mitre saw Elumatec DG 79 3000 mm with E 255 1 x stationary 1 x mobile Available from the end of November 2023 The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

I sell a double mitre saw without scoring with continuous COMEC TD2400 + CA. Working width 250 to 2400mm. Max. saw profile 80 x 100mm Angular setting of each head: Radial +50° / - 50° Axial +45°/ - 45° Saw blade diameter fi.350/30mm Motor power 1.85KW + 1.85KW Magazine for elements. Ejection back to operator Condition as good as new. Fully operational and ready to go. Possible to check. Available soon. With CE and complete documentation.

Description: Double mitre saw. Blade diameter: 350mm Useful cutting length: 3200mm Approx. Onsite Dimension. (l x w x h): 4,200 x 1,650 x 1,450 mm, weight approx.: 650 kg

Distance sawing max 90° mm: 2800 Diameter saw blade mm: 300 Main motor kW: 3.3 Weight Kg: 500

CNC double miter saw make ANTON type ADS-ENMachine -No: 39091, built in 1991For efficient sawing of aluminum and PVC profilesSaw blade diameter: 450 x 30 mmFeed infinitely variableAir consumption: 7 atm 200 l / minBlade speed: 2800 rpm.Cutting length: 260 - 5000 mmCutting area square: 265 x 100 mmCutting area round: 150 mmDrive power: 2 x 2.25 kWExternal dimensions: 6150 x 1200 x 1750 mmWeight: 1460 kgWith:- Control De Man 408- automatic pivoting from 45 ° to 90 °used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double miter saw make ELU type DG 102Machine -No: 23122 built in 1981for efficient sawing of aluminum profilesSaw blade diameter: 420 mmCutting area straight for profiles approx: 100 x 240 mmxa0xa0xa0 at 45 ° approx.: 100 x 180 mmSection length up to: 4500 mmSaw blade speed: 2800 rpm.Saw blade motor: 2800 rpm, 3 kW eachelec. Connection: 380 V, 6 kWDimensions: 1200 x 6000 x 1350 mmWeight approx: 1000 kgWith- compl. elec. and pneumatic. Facility- pneumatic. tensioning device- 2.5 m roller conveyor on movable saw carriage- saw bladesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Max cutting length: 4000 mm Cutting height: 200 mm Cutting width: 130 mm Power: 5,1 kW Weight: 650 kg

Main functions: Precision cutting of profiles at various angles. Operating pressure: max. 1MPa, air consumption: 28l/cycle, weight: approx. 2150kg.

Swivel range inwards: 90°-45°, saw blade diameter: 500mm, min. cutting length: 400mm at 90° and 45°, max. cutting length: 6000mm, saw blade speed: 2800rpm. Air consumption per cycle with/without spraying: 64l/40l. Documentation available. On-site inspection is possible.

2-spindle cross-cut saw for series production for precise shortening of materials. The machine can be manufactured in different versions depending on the specification and requirements. Specifications: Motor power: 2.2kW / 3kW Material length: 500 - 1500 mm Possibility to tilt the discs: YES Machine manufactured on request

Aluminum Double Miter Saw Fabr. ELUMATEC Type DG 79Year of construction 1982Saw blade diameter: 380 mmSaw blade hole: 32 mmCutting length: 4500 mmSwivel range R + L: 15 ° 22.5 ° 30 ° 45 °Angle: 0 - 45 °Section range: sh. sectional diagramCompressed air connection: 7 barSaw blade speed: 3800 rpm.smallest cutting length: 500 mmDrive power: 2 x 3000 WWeight approx: 490 kgwithout controlused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC double miter saw make ELUMATEC type DG 104Machine -No: 25725 Year 1990Saw blade diameter: 420 mmSaw blade hole: 30 mmCutting length: 6000 mmSlope range: 45 + 90 °Saw blade speed: 2800 rpm.Section range: sh. diagramkl. Cutting length: 335 mmPower: 2 x 4000 WDimensions: 6050 x 1600 x 1450 mmWeight approx. 1520 kgWith- CNC control E 255used from an operating resolution, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC Double Miter Saw Fabr. ELUMATEC Type DG 104Machine -No: 25591 Year 1989Saw blade diameter: 420 mmSaw blade hole: 30 mmCutting length: 6000 mmSlope range: 45 + 90 °Saw blade speed: 2800 rpm.Section range: sh. diagramsmallest Cutting length: 335 mmPower: 2 x 4000 WDimensions: 6050 x 1600 x 1450 mmWeight approx. 1520 kgWith- Control E 200- Roller conveyorused from an operational resolution, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC Double Miter Saw Fabr. ELUMATEC Type DG 104Year of construction 1992Saw blade diameter: 420 mmSaw blade hole: 30 mmMax. Cutting length: 6000 mmminimum cutting length at 90º + 45º: 360 mmPivoting range inwards: 90º - 22,5ºInclination range inside: 90º - 45ºSaw blade speed: 2800 rpm.Section range: sh. diagramPower: 2 x 4.0 kWDimensions approx: 7500 x 1600 x 2200 mmWith- CNC control - screen -- separate control cabinetused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double miter saw make RAPID type DGLSeries 3737, make -No: 2748 built in 1978with drilling and milling machine type BFA series 1109, make -No: 301 built in 1978Sägeblattdrm. : 420 mmCutting length: 4500 mmSaw blades tiltable: 90 - 45 °Max. Cutting height: 150 mmDrive power sawing units: 2 x 3 kWDrive power drilling unit: 1.1 kW (2700 rpm)Motor longitudinal adjustment sawing units: 0.75 kWExternal dimensions L x W x H: 7000 x 1100 x 1700 mmfor olive drilling and lock boxWith- Programmable control MTH for length- 2 revolving extraction systems- Drilling unit BFA (for drilling and milling of handle and lock machining)used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best r ...

Double Miter Saw Make EISELE EMMEGI Type VISA -2 TU / 5Fabr. -No: 148402, built in 1988Saw blade diameter: 450 mmSection length min.:240 mmSection length max .: 5000 mmDrive power: 2 x 2.5 kWOutside dimensions approx. 6500 x 1400 x 1600 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC double miter saw, make ELUMATEC type DG 104Masch. -No: 25647 Year of construction 1989Technical specifications:Saw blade diameter: 420 mmSaw blade bore: 30 mmCutting length: 4000 mmTilt range: 45 + 90 °Saw blade speed: 2800 rpm.Cutting area: sh. diagramsmall Cutting length: 335 mmPower: 2 x 4000 W.Dimensions: 6050 x 1600 x 1450 mmWeight: 1520 kgWith- CNC control E 255used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double miter saw make RAPID type DGLSeries 6954, machine -No: 4066 built in 1989Technical specifications:Saw blade diameter: 6000 mmCan be swiveled up to: 45 °Section length up to: mmSaw blade speed: 2800 rpm.Unit adjustment: via spindle with handwheelSaw blade drive per unit: 2 x 3.5 kWelectrical connection: 380 VExternal dimensions L x W x H: 7200 x 1500 x 1900 mmWeight approx: 400 kgwithout controlusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC double miter saw make RAPID type DGLYear of construction 1990Technical specifications:Saw blade diameter: 380 mmSection length: 4800 mmcan be swiveled up to: 45 °Saw blade speed: 2800 rpm.max.cutting height: 210 mmDrive power: 2 x 2.2 kW eachWeight approx: 700 kgExternal dimensions approx .: 1250 x 5850 x 1200 mmwith- CNC Control- pneumatic clamping cylinderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double miter saw Make Pressta Eisele Type Norma LMS D 400 Masch. -No: 222633 Year of construction 1992 Technical specifications Cutting length 4000 mm Saw blade diameter 400 mm Speed 2890 rpm. with - Neig and tiltable - Digital length display Used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

-Round capacity: 90 mm; -Volume Rectangular: 120 mm; -A fixed and a movable head; -Displacement approx. 6 m (with size scale); -2800 rpm; -The brackets of the guide rails are broken. But can be replaced; -Please note! The brackets of the guide rail are broken, small brackets are broken during transport, but these are replaceable.

Order No. 6712 TECHNICAL DATA - min. board length after formatting 800mm - max length of the board after formatting is 1300mm - max board width 270mm - max board height 70mm - max diameter of the disc 350mm - shield on the discs (serves as a pressure) - spindle diameters 60mm - length of spindles working part 260mm - main engine power 4kW - feed motor power 0.75kW - 2 feed speeds - dimensions of the table top 1820x15100mm - diameter of the extraction connector 2x100mm - overall dimensions: length / width / height 1900x1900x1400mm - weight 578 kg ADVANTAGES - Polish production - for processing a pallet board - used saw, very good condition Net price: PLN 14900 Net price: EUR 3311 Net price, calculated at the rate of 4.5 PLN / EUR (with greater fluctuations in the rate, the price may change)

Wegoma 350 Double miter saws - Writing saws Type: 350 Year of construction: Motor: 2 2.2 kW (3 PK) Saw: ø330 mm Speed: 2800rpm Length: 3,500 mm Panning: 0 - 45° Inclination: 0 - 45° Werkst. Fixation: Pneum. Clamping Semi-automatic pneumatic saw movement Condition: Functionally tested

Double cross-cut saws Hüllhorst Year of construction: 1999 Cutting length 3000mm Cutting width 3000mm Scoring on each side Scoring is pneumatically evasive Saw blade diameter max. 400mm Saw blades are not swivelling The width of sawing units can be adjusted by motorisation

SPECIFICATIONS: Working range mm: min 220 - max 1200 Saw blade diameter mm: 350 Bore mm: 30 2 motors, 1.5 KW each Vertical and horizontal saw blade inclination 35° With drawer for accessories

OMS double miter saw SALVARANI model OK 350 SUPER: - useful opening 3500mm - adjustable blades D=350mm - machine according to CE standards

Manufacturer: Düspohl, Type: DEA 150, Year: ca.1995, Control: hand, Pneumatical clamping system: yes, Schnitthöhe min-max mm: 120, Schnitttiefe min-max mm: ca.150 -150, Power saw engine kW: ca.3, Action controlled: yes, Saw blade diameter max mm: 350, rotations controlled: 4500, Year :ca.1995

Manufacturer: Unbekannt, Year: ca.1985, Saw blade tiltable up to °: 45-90 und Schifterschnitt, Schnitttiefe min-max mm: 90, Schnittlänge min-max mm: ca.3500, Power saw engine kW: 0,75, Width adjustment manually: yes, Action controlled: yes, Saw blade diameter max mm: ca.250, rotations controlled: ca.4500, Vacuum clamping system: Pneumatisch, FREE TEXT: Hydropneumatischer Vorschub Sägen, Year :ca.1985

Manufacturer: Haffner, Type: DGS 202E 6000, Program control: yes, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Schnittlänge min-max mm: 400-6000, Power saw engine kW: 2,2, Width adjustment by engine: yes, Saw blade diameter max mm: ca.500, rotations controlled: 2850,

Manufacturer: WMS, Type: 20051, Year: 2001, Control: Hand, Pneumatical clamping system: yes, Saw blade tiltable up to °: 90-45, Schnitthöhe min-max mm: ca.100, Schnitttiefe min-max mm: 400, Schnittlänge min-max mm: 2110, Width adjustment by engine: yes, Saw blade diameter max mm: 450, Hauptmotorsäge kW: 4, rotations controlled: 2860, Year :2001

Manufacturer: Doppelgehrungssäge, Type: DKG 400 A, Year: ca.1984, Control: Hand , Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Schnitthöhe min-max mm: ca. 70, Schnitttiefe min-max mm: 100, Schnittlänge min-max mm: 3500, Power saw engine kW: 3 KW,100 Hz, Width adjustment by engine: yes, Action controlled: yes, Saw blade diameter max mm: 300, rotations controlled: 4500, Bohreinheit Horizontal: 100, On customer order: inkl. Bohrstation, Year :ca.1984

Manufacturer: Doppelgehrungssäge, Type: DKG 400 A, Year: 1984, Control: Hand / Teilautomatik, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Cutting hight max mm: ca. 70, Cutting lenght max mm: 2500, Power saw engine kW: 3, 100 Hz, Width adjustment manually: yes, Width adjustment by engine: yes, Action controlled: yes, Saw blade diameter max mm: 300, rotations controlled: 4500, Exhaust diameter mm: 100, inkl. Bohrstation, Year :1984

Manufacturer: Düspohl, Type: DGK 400, Year: 1980, Control: Hand, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45 - 90, Cutting hight max mm: ca. 70, Max. cutting depth in mm: 150-2600, Max. cutting depth in mm: 150-2600, Power saw engine kW: 2,2, Width adjustment manually: yes, Saw blade diameter max mm: 300, rotations controlled: 5800, Exhaust diameter mm: 100, Year :1980

Manufacturer: Haffner, Type: DGS 124, Bauyeshr : 1994, Pneumatical clamping system: yes, Sägeblätter schwenkbar bis ° : 45-90-45, Schnitthöhe max mm : ca.150, Schnittlänge max mm : 200, Schnittlänge max mm : 200, Power saw engine kW: 2,9, Width adjustment by engine: yes, Saw blade diameter max mm: 500, rotations controlled: 2800, Year :1994

OMS SALVARANI double cut-off saw model OK 350 SUPER: • Useful opening 3200mm • Swivel blades D=350mm • year 1999 , according to CE standards AVAILABILITY FROM APRIL 2024

LACHNER DGA 900 TOP DIGITAL with digital display Battery operated (6x Mignon 1.5V) Resolution: 0.1 degrees 2 stop flaps 1 stop extension Universal fastening system Fits almost any sliding table saw Instruction manual available

Specifications: Sawing area 90° round / flat / quad: 265 / 300 x 150 / 200 x 200 mm 75° left/right round / flat / quad.: 265 / 280 x 150 / 200 x 200 mm 60° left/right round / flat / quad.: 250 / 250 x 150 / 200 x 200 mm 45° left/right round / flat / quad: 200 / 200 x 100 / 180 x 180 mm 30° li round / flat / quad: 130 / 130 x 100 / 125 x 125 mm Cutting speed: 17 - 100 m/min Band saw dimensions: 3280 x 27 x 0.9 mm Working height: 950 mm Drive power: 2.0 kW Connection: 400 V Weight, approx.: 390 kg Dimensions, (LxWxH), approx.: 1580 x 930 x 1400 mm Equipment: - Can be swivelled left and right - Highly stable saw frame - Easy to use - Emergency stop push button -CE