127,439 used machines on RESALE, but how to find them? Machine Search
sheet width: siehe TD mm plate thickness: siehe TD mm distance between columns: siehe TD mm total power requirement: 7,5 kW weight of the machine ca.: 3,23 t dimensions of the machine ca.: 3200 x 2300 x 1350 mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 8mm total power requirement: 15 kW weight of the machine ca.: 14,1 t dimensions of the machine ca.: 6310 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 13mm total power requirement: 22 kW weight of the machine ca.: 21,3 t dimensions of the machine ca.: 6560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 16 total power requirement: 37 kW weight of the machine ca.: 23,81 t dimensions of the machine ca.: 6560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 400 mm roll length: 1000 mm rolls drilled: peripher Nip adjustment: hydraulisch total power requirement: 2x 30 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Marine engines very good condition take out of Yacht 50meters 1200HP@1800 complete over all. ZF gear boxes model 451-1 Reduction ratio 4:1
Lathe and various small parts Manufacturer: Eugene of white Type: DLNE Year of construction: 1954 Top width: 2000 mm Bed width: 380 mm Bed length: 3410 mm Outer dimensions: 3,850 x 1,020 x 1.135 mm Net weight: approx. 2500 kg maximum speed: 935 RPM maximum speed faceplate: 710 RPM Tour is possible upon request.
Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pallet fork (fork length 1000 mm) with carriage / ballast weight three-point hitch
Number of sanding units: 2 St. sanding width: 290 mm Sanding height max.: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Düker Rex mixer-automatic grinder D 114 mm, type AW 114. You are very welcome to test the machine in 56070 Koblenz, Germany.
roll diameter: 400 mm roll length: 1100 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch total power requirement: 2x 30 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: siehe TD mm pressure: siehe TD t total power requirement: 4 kW weight of the machine ca.: 0,950 t dimensions of the machine ca.: 900 x 1050 x 1300mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 25mm total power requirement: 37 kW weight of the machine ca.: 20,5 t dimensions of the machine ca.: 5560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 37 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 2900x2300x2150 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 10mm total power requirement: 15 kW weight of the machine ca.: 10,6 t dimensions of the machine ca.: 5310 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt mm U-iron on the x-axis: unbkt. mm total power requirement: 77 kW weight of the machine ca.: 45 t dimensions of the machine ca.: 6000x5000x3500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt mm U-iron on the x-axis: unbkt. mm total power requirement: 90 kW weight of the machine ca.: 55 t dimensions of the machine ca.: 6500x5300x3750 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 13 total power requirement: 15 kW weight of the machine ca.: 8,84 t dimensions of the machine ca.: 4760 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm distance between columns: siehe TD mm total power requirement: 7,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2700 x 2300 x 1350mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 4mm total power requirement: 5,5 kW weight of the machine ca.: 2920 t dimensions of the machine ca.: 3600 x 970 x 1140mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
sheet width: siehe TD mm plate thickness: siehe TD mm distance between columns: siehe TD mm total power requirement: 3 kW weight of the machine ca.: 1,28 t dimensions of the machine ca.: 2600 x 1350 x 1260 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt, mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 11 kW weight of the machine ca.: 3,36 t dimensions of the machine ca.: 1175x1340x1650 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 20mm total power requirement: 30 kW weight of the machine ca.: 18,3 t dimensions of the machine ca.: 5560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
100L stainless hopper, adjustable fill size on mobile stainless frame
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 6mm total power requirement: 11 kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: 4880 x 1160 x 1180mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt. mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 30 kW weight of the machine ca.: 8,6 t dimensions of the machine ca.: 2500x2000x1900 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cooling water pump overtook 716 V12 in Exchange for Deutz
DYNABOX 500 - 230V 50Hz DYNAJETten with system: the powerful hot water unit Dynabox 500 with up to 500 bar working pressure is the ideal addition to all DYNAJET trolleys. Simply on the Connect the high-pressure side between the high-pressure cleaner and the cleaning tool and already achieve results with up to a maximum of 95 °C hot high-pressure water that can be achieved with conventional Cold water cannot be reached. Of course, the Dynabox 500 is also characterized by its low weight, small dimensions and easy loading and Transportation options. BASELINE System hot water generators Type Trolley/Box Pressure class 500 bar Pressure adjustable No Pressure minimum 40 bar HYDRAULICS Minimum flow rate 7 l/min Maximum flow rate 15 l/min THREADED CONNECTION Input connection M24x1,5 AG Output connector M24x1,5 AG DRIVE Voltage and frequency 230 Volt AC 50Hz Volume ...
Dynajet roof cleaner for quick and thorough roof cleaning. Net price: € 2.933,00. Ideal for cleaning concrete roof tiles and tiled roofs. Fully equipped with brush, pressure gauge, 2/2 way ball valve for high pressure on/off, wheel spacing and height adjustable to roof profile, nozzle beam for 2 identical nozzles (form D). Connection: M22 x 1.5 AG or M24 x 1.5 AG 500 mm diameter. Please order the nozzles, sealing and support rings separately (not included). Attention: 2 identical nozzles are always required. Nozzle selection: Machine type Designation Form 15° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500me + 500mg + 500md 1.15 D for 500th + 500me-30 1.3D 30° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500th + 500me-30 1.3D General technical data Maximum pressure 500 bar Connection type (input) M22x1,5 AG ...
DYNAJET 500th HELI with approx. 4,250 operating hours, price 22.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mi ...
WEIBERT WJ-D53 Thickness Planers WEIBERT WJ D53 NEUMASCHINE! 400V 5,5 KW (7,5 HP) n = 5000 RPM Planing width 530 mm Max.Spanabnahme 8 mm Planer shaft D = 125mm 4 turn blade shaft Clearance height from 3 to 300 mm Feed speed of 8 and 16 m / min. Feed motor 1.5 KW (2 HP) Dust nozzle by 160 mm Electronic height adjustment of the Thicknesser table with display Machine table, Planer shaft bearing block and table management from GRAUGUÃ?! G & WJ-D53
DYNAJET 500th HELI with approx. 800 operating hours, price 38.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mini ...
DYNAJET 500th HELI with approx. 1,450 operating hours, price 33.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mi ...
Recon Part number: 0400 6046 Cast: 0215 9704 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Element welding Turntable werkstueck drehvorrichtung
Sales are made on behalf of the customer. Professional high-pressure cleaner DYNAJET 500th HELI Blue Performance The No. 1 in efficiency, power and performance. Professionals from all industries worldwide rely on dynaJET's highly efficient high-pressure water cleaners. These high-pressure units impress with their universal application possibilities, extreme cost-effectiveness, absolute reliability, long product life and uncompromising quality. Standard safety equipment offers you and your employees the highest level of safety. The latest generation of DYNAJET high-pressure units offers reduced fuel consumption, lower emissions and improved ease of use. Get efficiency, or even the opportunity to conquer new business areas, in your company. All DYNAJET high-pressure cleaners are comprehensively tested by our quality management before they are delivered. Our product and accessor ...
RECON Part number: 0400 5186 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Sales are made on behalf of the customer. Professional high-pressure cleaner DYNAJET 350th HELI The No. 1 in efficiency, power and performance. Professionals from all industries worldwide rely on dynaJET's highly efficient high-pressure water cleaners. These high-pressure units impress with their universal application possibilities, extreme cost-effectiveness, absolute reliability, long product life and uncompromising quality. Standard safety equipment offers you and your employees the highest level of safety. The latest generation of DYNAJET high-pressure units offers reduced fuel consumption, lower emissions and improved ease of use. Get efficiency, or even the opportunity to conquer new business areas, in your company. All DYNAJET high-pressure cleaners are comprehensively tested by our quality management before they are delivered. Our product and accessory portfolio ensu ...
Discus Werke DSH 600/1000 Side Surface Grinding Machine This type of machine is a machine with a motor-driven grinding spindle. The clamping and grinding of the workpieces is carried out with clamping devices tailored to the respective work. The devices are attached to the machine bed. The column saddle on which the motor spindle is mounted serves as a feed, dressing and pendulum slide. Manufacturer: Diskus Werke Model: DSH 600/1000 Serial number: 6299 Type: Side Surface Grinding Machine Cooling lubricant: Isocool 1020 BF Coolant volume: 400 liters Concentration: 2.5% (x factor 1.6 ≙ 4%) Year of construction: 1964 Condition: used The side surface grinding machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, ...
maximum number of results exceeded
please refine your search
