We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,047 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
BALLISTRINE- linear profiler,/shaper-double sided 10 hp cutter head per side- follows your templates - shapes both sides- 9' table- hydraulic feed- material hold downs- $7,800
used
Double tumbler on s/s frame, inside dimensions each tumbler: (2x) ø 800 mm x 1000 mm, total dimensions: 2350 mm x 3100 mm x 2650 mm.
used
Double D Rack oven 2006, stainless, single rack oven, timer and temperature controls, with fan and light, 45Kw, 3Ph
used
It is used in rubber and plastics mixing, warming mixing, sheeting mixing, etc. III Equipment specification XK400×1000 mixing mill 1. Main technical specification NO. Item Main technology data and feature A Main technology data 1 Roll diameter 400mm 2 Roll working length 1000mm 3 Roll linear speed Front:14.85m/min Rear:18.85m/min 4 Speed ratio of rolls 1:1.27 5 Max roll space 10mm 6 Compound feeding capacity 25kg-35kg 7 Motor power 37KW,n=980r/min,IE3 8 Dimensions 4400X1710X1850mm 9 Gross weight 8500kg B Feature of main machine 1 Roll size(mm) Ф400×1000 material alloy chilled hard cast iron, surface hardness HS70±2,Surface roughness: Ra0.2 Bearing type Adopt the aligning roller bearing, copper pressure ring, bearing taper 1:12 type Front roll is drilled roll and rear roll is drilled roll, can pass cooling water, e ...
used
Euro taxes are payed, Rubber mixing mills for sale. Mills are technicaly like new, worked only in demo regime. Price includs test before loading, loading costs. 1 Roll diameter 400mm 2 Roll working length 1000mm 3 Roll linear speed Front: 14.85m/min Rear:18.85m/min 4 Speed ratio of rolls 1:1.27 5 Max roll space 10mm 6 Compound feeding capacity 25kg-35kg 7 Motor power 37KW,n=980r/minIE3 8 Dimensions 4400X1710X1850mm 9 Gross weight 8500kg
used
Cooling cell/freezer, 2 GEA evaporators, inside dimensions: 5500 mm x 8800 mm x 3780 mm, 5500 mm x 2520 mm x 3780 mm, total dimensions: 5820 mm x 11800 mm x 4150 mm.
used
Brand: GME Bavelloni Type: 2x Double Edger Model: MB 12 Linea, incl turning tables Construction year: 1995 Length mm: 4400 Width mm: 2800 Height mm: 2200 Transport size L x W x H: 4,4 x 2,8 x 1,3 Number of spindles: 4 x 12 spindles Condition machine : Working disassembled Photos/film available: Photos and video available Combi with: GME Triulzi Washing Machine Horizontal (23013)
used
grinding height: 50 mm grinding width: 120 mm grinding wheel diameter: 600 mm total power requirement: 85 kW weight of the machine ca.: 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _______________________________________________________ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grin ...
used
grinding height: 60 mm grinding width: 120 mm grinding wheel diameter: 600 mm grinding length: mm workpiece height: 60 mm total power requirement: 50 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 ______________________________________________________________________ ________ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 1 ...
used
Double diaphragm pump with air drive DEPA type DH40-FA-ZRT Air operated diaphragm pump, double pump Series no.: B1802498 Year of construction 09.05.2018 Temperature: max. 130C Size: 40 Grain size: max. 16 mm Suction height: approx. 2 m Suction height filled with prudukt: approx. 9 m Operating pressure: max. 7 bar Air connection: 3/8 Suction connection: 1 1/2 Pressure connection: 1 1/2 - self-priming - Aluminium housing - Diaphragm plate made of stainless steel - Membrane made of nopped E4® PTFE composite balls made of PTFE ball seats made of stainless steel Space requirement: L x W x H: 370 x 270 x 450 mm Net weight: 15 kg very good condition; used
used
Double diaphragm pump with compressed air drive DEPA type DH50-FA-ZRT Air operated diaphragm pump, double pump Series no.: B1600416 Year of construction 26.01.2016 Temperature: max. 130C Size: 50 Grain size: max. 18 mm Suction height: approx. 2 m Suction height filled with pressure: approx. 9 m Operating pressure: max. 7 bar Air connection: 3/4 Suction connection: 2 Pressure connection: 2 - self-priming - Aluminium housing - Diaphragm plate made of stainless steel - Membrane made of nopped E4® PTFE composite balls made of PTFE ball seats made of stainless steel Space requirement: L x W x H 550 x 350 x 560 mm Net weight: 35 kg very good condition; used
used
Double miter saw Manufacturer: Düspohl Model: DGK 400 B Built: 2000 Cutting width: 100mm Cutting height: 100mm Saw aggregates Swivel: -45° - + 45°
used
CONTROLS conventional WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter: 750 mm grinding width max. - throughfeed grinding: 150 mm material thickness max. - throughfeed grindin: 70 mm GRINDING SPINDLE 1 spindle revolutions (max): 610 /min GRINDING SPINDLE 2 spindle revolutions (max): 610 /min COMPONENT-FEEDER Feeder Design: rotary Feeder DIMENSIONS / WEIGHTS space requirements -left/right-: 5230 mm space requirements -front/back-: 4460 mm total height: 3600 mm total weight approx.: 11000 kg Machine is dismantled and stored
used
CONTROLS CNC controls SIEMENS 840 D WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter: 750 mm grinding width max. - throughfeed grinding: 180 mm material thickness max. - throughfeed grindin: 30 mm grinding width max. - plunge cut grinding: 300 mm material thickness - plunge cut grinding: 80 mm GRINDING SPINDLE 1 drive power: 48 kW GRINDING SPINDLE 2 drive power: 48 kW COMPONENT-FEEDER Feeder Design: rotary Feeder feeder velocity max.: 20 mm/min feeder velocity min.: 240 mm/min DIMENSIONS / WEIGHTS space requirements -left/right-: 4900 mm space requirements -front/back-: 5000 mm total height: 3100 mm total weight approx.: 13000 kg with inline measuring system DISKUS IONIC 17A Emulsion treatment syst ...
used
CONTROLS CNC controls SIEMENS 840 C WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter: 457 mm grinding width max. - throughfeed grinding: 80 mm material thickness max. - throughfeed grindin: 20 mm grinding width max. - plunge cut grinding: 205 mm material thickness - plunge cut grinding: 80 mm GRINDING SPINDLE 1 drive power: 23 kW GRINDING SPINDLE 2 drive power: 23 kW COMPONENT-FEEDER Feeder Design: rotary Feeder feeder velocity max.: 240 mm/min feeder velocity min.: 20 mm/min Scope of delivery: - Machine - emulsion tank new in 2012 Measuring control IONIC 17A
used
CONTROLS CNC controls SIEMENS 810 T WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter: 750 mm grinding width max. - throughfeed grinding: 180 mm material thickness max. - throughfeed grindin: 30 mm grinding width max. - plunge cut grinding: 180 mm material thickness - plunge cut grinding: 30 mm COMPONENT-FEEDER Feeder Design: rotary Feeder ELECTRICAL SPECIFICATIONS total power consumption: 95 kW Scope of delivery: - Machine - div. flanges and used grinding wheels - Measuring control IONIC 17A Optional: - 270 pcs. grinding segments 22A 100 S 6 B20 - 289 pieces grinding segments 14C 80 L 10 B30 Machine is dismantled and stored
used
CONTROLS conventional WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter: 600 mm grinding width max. - throughfeed grinding: 200 mm material thickness max. - throughfeed grindin: 50 mm GRINDING SPINDLE 1 spindle revolutions (min): 76.5 /min spindle revolutions (max): 765 /min GRINDING SPINDLE 2 spindle revolutions (max): 765 /min COMPONENT-FEEDER Feeder Design: linear feeder feeder velocity max.: 2100 mm/min feeder velocity min.: 21000 mm/min ELECTRICAL SPECIFICATIONS total power consumption: 64 kW mains voltage: 380 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS total height: 2800 mm total weight approx.: 7800 kg grinding adjustment &n ...
used
Technical data Work-piece diameter: 5 - 50 mm Max. work-piece height: 1 - 70 mm Arrangement: bilateral (above, below) Grinding wheel: outside diameter: 457 mm inside diameter: 76.2 mm Width / height: 75 mm Grinding wheel speeds: from: 251 rpm up to: 1254 rpm from: 6 - 30 m/s Speed of the work-piece driving plate: from: 21.8 rpm up to: 215 rpm Voltage: 380 Volt Grinding motor power: 2 x 30 kW Total installed power: 35 kW Machine´s weight about: 4000 kg Overall dimensions machine: Length: 2450 mm Width: 1100 mm Height: 2700 mm Various accessories: Measuring instrument: IONIC
used
Manufacturer: Düspohl, Type: DEA 150, Year: ca.1995, Control: hand, Pneumatical clamping system: yes, Schnitthöhe min-max mm: 120, Schnitttiefe min-max mm: ca.150 -150, Power saw engine kW: ca.3, Action controlled: yes, Saw blade diameter max mm: 350, rotations controlled: 4500, Year :ca.1995
used
Manufacturer: Doppelgehrungssäge, Type: DKG 400 A, Year: ca.1984, Control: Hand , Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Schnitthöhe min-max mm: ca. 70, Schnitttiefe min-max mm: 100, Schnittlänge min-max mm: 3500, Power saw engine kW: 3 KW,100 Hz, Width adjustment by engine: yes, Action controlled: yes, Saw blade diameter max mm: 300, rotations controlled: 4500, Bohreinheit Horizontal: 100, On customer order: inkl. Bohrstation, Year :ca.1984
used
Manufacturer: Doppelgehrungssäge, Type: DKG 400 A, Year: 1984, Control: Hand / Teilautomatik, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Cutting hight max mm: ca. 70, Cutting lenght max mm: 2500, Power saw engine kW: 3, 100 Hz, Width adjustment manually: yes, Width adjustment by engine: yes, Action controlled: yes, Saw blade diameter max mm: 300, rotations controlled: 4500, Exhaust diameter mm: 100, inkl. Bohrstation, Year :1984
used
Manufacturer: Düspohl, Type: DGK 400, Year: 1980, Control: Hand, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45 - 90, Cutting hight max mm: ca. 70, Max. cutting depth in mm: 150-2600, Max. cutting depth in mm: 150-2600, Power saw engine kW: 2,2, Width adjustment manually: yes, Saw blade diameter max mm: 300, rotations controlled: 5800, Exhaust diameter mm: 100, Year :1980
used
The machine has been overhauled in the workshop. It was repaired, defective parts were replaced and functionally tested . The spindle bearing has been renewed, the rotary table drive has been overhauled Specifications Vertical grinding spindle assembly Workpiece diameter up to 30 mm Max. workpiece height 10/20 mm Grinding wheel diameter 300 mm Grinding wheel rotation speed 35 m/s Workpiece feed 1.5 to 15 m/min Drive power grinding wheel motor 2 x 22 kW Total drive cable approx. 50 kW Machine weight approx. 4.5 t Total space requirement approx. L x W x H 3.3 x 2.6 x 2.6 m The DISKUS DDS 300 RPD has been completely dismantled, cleaned, assembled and functionally tested. Spindle bearings and rotary table drive have been overhauled. Equipped by the manufacturer for grinding with CBN discs. The machine can be viewed by arra ...
used
Condition: Workshop overhauled, ready for demonstration and use, tested The DISKUS DDS 457 II CL was completely dismantled, cleaned, defective parts replaced and functionally tested. Specifications Grinding spindle: 2 pieces vertical Grinding process: Continuous process Workpiece width up to 60 mm Max. workpiece height 1-60 mm Grinding wheel diameter: 457 mm Grinding wheel rotation speed 24 m/s Workpiece feed 25 to 250 mm/min Drive power grinding wheel motor 2 x 15 kW Total drive cable approx. 35 kW Machine weight approx. 3.7 t Total space requirement approx. L x W x H 1.4 x 1.0 x 2.7 m Accessories: Replacement flanges – Errors, modifications and prior sale excepted –
used
Grinding disk diameter: 600mm, controls: Siemens S7, with documentation, was maintained regularly, an inspection is possible.
used
Inv. Num. : 7297 Type: DDH 900 So Producer: DISKUS Created: 1978 Parameters: Machine weight: 10000 kg
used
Description: Serial number 054749 , Read operating hours 60866, read spindle hours 20442 , Power output 36 kVA max. tool length from spindle nose ,280 mm max. tool weight with automatic tool change 6 kg, total weight in magazine 2 x 80 kg including the tool holders and tools on the tool changer with coolant system and chip conveyor  , A standard truck is sufficient for transportation z-motion: 380 mm, max. workpiece weight between centers: 500 kg, x-motion: 2 x 500/1800 mm, y-motion: 380 mm, control: HEIDENHAIN TNC 426, table surface area l x w : 800x480/Durchmesser 320 mm, taper: SK 40, toolchanger positions: 48, turning speed range: 8,000 rpm, weight approx.: 7,000 kg, Approx. Onsite Dimension. (l x w x h): 4,800 x 4,400 x 2,400 mm
used
adjustment drive of the grinding spind.slide:0,0025 - 0,05 mm total power requirement:100 kW adjustment of grinding head slide:150 mm weight of the machine ca.:17 t grinding spindle drive:2 x 37 kW grinding width:30-150 mm peripheral speed:34 m/sec workpiece speeds:60 - 300 mm/Sek. grinding height:70 mm grinding wheel diameter:750 mm grinding tools:750 x 75 x 350 mm grinding wheel turning speeds:870 U/Min. max. workpiece diameter:250 mm
used
General SKU101Y726 LocationBarneveld MakeHändle TypeEDR 21-A No.PZ-3445 Year of construction2000 Main Features Motor22 KW Length1400 mm Inlet diameter210 mm Specified Features - Double screw extruder MaterialStainless steel Double screw extruders Screw press(1x) Double screwcheck Screw diameter210mm Screw length1400mm Motor22,0 KW, 400/690 Volt Speed± 43 Rpm Inletdia. 245mm With jacket(max. 6 bar) Information Floorspace3,6x0,9 M Total height1,3 M Weight2950 KG Extra Specifications- Sieve plate housing is missing - Max. pressure 20 bar Double screw extrudersHaendleExtruders > Double screw extrudersBrand > Haendle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Bar ...
used
General SKU041H136 LocationBarneveld MakeHändle TypeEDR 21-A No.PZ-3444 Year of construction2000 Main Features Motor22 KW Length1400 mm Inlet diameter210 mm Specified Features - Double screw extruder MaterialStainless steel Double screw extruders Screw press(1x) Double screwcheck Screw diameter210mm Screw length1400mm Shaft diameter100mm Pitch250/140mm Motor22,0 KW, 400/690 Volt Speed± 43 Rpm Inletdia. 245mm With jacket(max. 6 bar) Information Floorspace3,6x0,9 M Total height1,3 M Weight2950 KG Extra Specifications- Max. pressure 20 bar Double screw extrudersHaendleExtruders > Double screw extrudersBrand > Haendle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in ...
used
General SKU354T966 LocationBarneveld MakeClextral TypeBC45 Mach.No.876 Main Features Motor21 KW Inlet diameter105 mm L/D28 Specified Features - Double screw extruder Double screw extrudercheck Number of hours1223 Screw diameter55 mm L/D28 Counter rotatingcheck Number of heating zones:5 Electric heatingcheck 7kW each Water coolingcheck DC-motor21 kW, 430 Volt Screw speed50-300rpm Feeding with hoppercheck Exchangeable segmentscheck MaterialMild steel Information Year of construction1990 With switchgearcheck(as is) Sizes switchgear3,3x0,62x2,26 m Total height2,3 m CEcheck Floorspace4,25x1,25 m Weight2300kg Extra Specificationsmachine comes with additional parts. the screw consists of segments specifications p34 cutter: 2.2kW, 380/420 volts, 2280rpm Double screw extrudersClextralExtruders > Double screw extrudersBrand > Clextral What you can expect from Foeth ...
used
General SKU231U195 LocationBarneveld MakeWerner & Pfleiderer TypeZSK 50 MCC Mach.No.64012350 Sizes Screw diameter40 mm Main Features Motor181 KW Inlet diameter165 mm L/D54 Specified Features - Double screw extruder Double screw extrudercheck Number of hours34432 Screw diameter40 mm L/D54 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water coolingcheck DC-motor0,79-181 kW 470 Volt Screw speed4-920-1056 rpm Feeding with hoppercheck (165x130 mm) Feeding with metering screwcheck (Werner&Pfileiderer, type: ZS-B 58, motor: 5-6 kW, 400 Volt, max. 400 rpm) Exchangeable segmentscheck Number of temperature controllers:10 Capacity200-400 kg/h MaterialFerritic stainless steel 1.4113, Mild steel, Nitriding Steel 1.8550 Information Year of construction2000 With switchgearcheck Total height0,73 m CEcheck Floorspace2,1x0,2 m Weight± 7340 kg Extra ...
used
General SKU411T126 LocationBarneveld MakeClextral Framatome TypeEV 32 Mach.No.B 101 Main Features Motor52 KW Inlet diameter80 mm L/D36 Specified Features - Double screw extruder MaterialStainless steel 1.4306 (304L) Double screw extrudercheck Number of hours146.30 Screw diameter32 mm L/D36 Counter rotatingcheck Number of heating zones:8 Steam heatingcheck AC-motor45/52kW, 380-420/440-480/660 Volt, 1480/1780 rpm Feeding with metering screwcheck clextral C0 Number of temperature controllers:8 Information Year of construction2000 With switchgearcheck(as is) Total height3.26 CEcheck Floorspace4,3x1,42 m Weight3460 kg Extra Specificationsmachine comes with k-tron Feeder specifications: Type LWF D5/ Type K2-ML-T35/DR Dia: 400mm feeder inlet Outlet: 110mm Double screw extrudersClextralExtruders > Double screw extrudersBrand > Clextral What you can expect from Foeth ...
used
General SKU292M349 LocationBarneveld MakeBerstorff TypeZE-25 Mach.No.EO 0324/88 Main Features Motor6 KW Inlet diameter25 mm L/D20 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameterdia. 25x500mm L/D20 Number of heating zones:3 Electric heatingcheck Water coolingcheck DC-motor6 KW, 200 Volt Screw speed0-450 Rpm Feeding with hoppercheck Feeding with metering screwcheck Information Year of construction1989 With switchgear( as is ) Sizes switchgear0,8x1,0x2,0 M Floorspace1,8x0,8 M Total height1,1 M Weight450 KG Extra Specifications incl. tempereer eenheid 3,5 KW, 380 Volt. THERE ARE NO SCREWS WITH THIS MACHINE !Double screw extrudersBerstorffExtruders > Double screw extrudersBrand > Berstorff What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destina ...
used
General SKU095Y843 LocationBarneveld MakeWerner & Pfleiderer TypeZSK-170 W-1750 5G Mach.No.221 071 Main Features Motor760 KW Inlet diameter170 mm L/D14 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameter170mm, Screw length 2500mm L/D14,7 Co-rotatingcheck Electric heatingon housing no. 2, 3, 4 en 5 (65,8 KW) DC-motor760 KW, 6000 Volt Screw speed± 198 Rpm Used onDMD Information Year of construction1986 Without switchgearcheck Floorspace14,0x4,0 M Weight21.000 KG Extra Specifications :- Barrel material 1.8519, screw material 1.2344 Double screw extrudersWerner & PfleidererExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Ba ...
used
General SKU304P676 LocationBarneveld MakeAPV Chemical Machinery Ltd TypePGX 30 Mach.No.800471 Main Features Motor4 KW Inlet diameter30 mm L/D10 Specified Features - Double screw extruder Double screw extrudercheck Number of hours19187 Screw diameter30mm L/D10 Co-rotatingcheck Water coolingcheck AC-motor4,0 KW With variable speed drivecheck Screw speed(161rpm) Feeding with hopperdia.340mm x400mm Feeding with metering screwK-Tron T-22 twinscrew, Motor feeder 0,55 KW, Motor agitator 0,18 KW Number of temperature controllers:1 Capacity30 KG/Hr MaterialStainless steel 1.2379 (X153 CrMoV12), Stainless steel Information Year of construction1989 With switchgearcheck Floorspace1,8x0,8 M Total height2,2 M Extra Specificationswith extrudermold dia.1mm Double screw extrudersAPV ProductsExtruders > Double screw extrudersBrand > APV Products What you can expect from Foet ...
used
General SKUR1061 LocationBarneveld MakeKrupp Werner & Pfleider TypeZSK 50 P8.15E Mach.No.20474395 Main Features Motor51 KW Inlet diameter50 mm L/D42 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter50mm L/D42,4 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water coolingcheck Feeding with hopper(3x) Feeding with metering screwcheck MaterialStainless steel 1.2379 (X153 CrMoV12) Information Year of construction2000 With switchgear(2x) Sizes switchgear0,9x0,6x2,1 M (1x) 1,6x0,6x2,1 M (1x) Total height1,5 M Floorspace4,7x1,1 M Weight4000 Kg Extra SpecificationsWith twin screw side entry Werner &: Pfleiderer ZS-B 58 with 3 x K-tron dosing screws including funnels including 2x vibrating chute and including Bredel hose pump SP / 32 Double screw extrudersW&PExtruders > Double screw extrudersBrand > W&P What you ca ...
used
General SKU288P487 LocationBarneveld MakeWerner & Pfleiderer GmbH (DE) TypeZSK 70 F175E Year of construction1990 Main Features Motor80 KW Inlet diameter70.5 mm L/D15 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter70,5mm L/D15,3 Co-rotatingcheck Ventedcheck Number of heating zones:3 Electric heating7+7+5 KW Water coolingcheck DC-motor80 KW, Screw speed300 rpm Used onpowdercoating MaterialMild steel Information Mach.No.230 196 With switchgearcheck Floorspace4,0x0,9 M Weight5700 KG Extra SpecificationsIncluding GWK Watercooler, : Double screw extrudersW&PExtruders > Double screw extrudersBrand > W&P What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. ...
used
General SKUR1123 LocationBarneveld MakeWLS Gabler Maschinenbau KG (D) TypeDE 100/100 No.12482 Year of construction1992 Main Features Motor18.5 KW Inlet diameter100 mm L/D9 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter100mm L/D9.4 Co-rotatingcheck Number of heating zones:2 AC-motor18,5 kW 380/660 Volt Feeding with hoppercheck MaterialStainless steel Information With switchgear( as is ) Total height1,7 M Weight2150 Kg Floorspace2,5x1,3 M Extra SpecificationsIncluding 1 piece Single Temperiertechnik heating units STW 150 / 1-9-20-K1S 9 kW 400 Volt including 2 spare screws Double screw extrudersWLS GablerExtruders > Double screw extrudersBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...
new
Double grinding buck Manufacturer Greif Type D20-1-1 Kw 0.55 New grinding wheels Neulack Very good and quiet run Grinding machine Abrasive Grinding Buck Double Grinding Machine Double Grinding Wheel Machine Special price
used
Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Manufacturer: Kaltenbach, double miter saw type DKL 500 -Cutting length: 245 to 4180 mm -Saw units: 45° pivotable -Saw blade: Ø 490 mm -Accessories: incl. Saw blades see photos -Total dimensions: 5130/1100/H1410 mm -Total weight: 1154 kg
used
Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Knuth, double bench grinder type DSB200D -Grinding discs: max. Ø 200 x 32 x 32 mm -Motor power: 0.9 kW -Speed: 2950 rpm -Operating voltage: 220/380 volts -Dimensions: 500/300/H1100 mm -Weight: 43 kg
used
ID3154 3 piece Kleemann Double Roller Crusher Double roll crusher Double Roller Crusher
used
General SKU231U203 LocationBarneveld MakeLeistritz TypeSZE-50 GL Mach.No.94.91.2168/7 Main Features Motor52 KW Inlet diameter49.7 mm L/D42 Specified Features - Double screw extruder Double screw extrudercheck Number of hours31783 Screw diameter49,7 mm L/D42 Co-rotatingcheck Number of heating zones:9 Electric heating33 kW Water coolingtype: ZIK - (Zylinder Intensiv Kühlung, eng. Barrel intensive cooling) DC-motor46 kW, 460 Volt AC-motorside dosing screw of the extruder: 1,5 kW 230-400 Volt Screw speedmax. 400 rpm MaterialNitriding Steel 1.8550 Information Year of construction1994 Sizes switchgearcheck(as is) Total height1,9 m CEcheck Floorspace4,26x0,80 m Weight2000 Extra Specificationspower cabinet dimention: 2,26x0,62x2,2 mDouble screw extrudersLeistritzExtruders > Double screw extrudersBrand > Leistritz What you can expect from Foeth: -- Machine is in wo ...
used
General SKU354T968 LocationBarneveld MakeWerner & PFleiderer TypeContinua 37/27 D Mach.No.220331 Sizes Screw diameter37 mm Main Features Motor7.6 KW L/D27 Specified Features - Double screw extruder Double screw extrudercheck Number of hours284222 Screw diameter37 mm L/D27 Co-rotatingcheck Number of heating zones:5: 1 cooling: 4 heating Steam heatingcheck DC-motor7,6 kW 440 Volt With variable speed drivecheck Screw speed0-400 rpm Exchangeable segmentscheck Number of temperature controllers:5 MaterialMild steel Information Year of construction1985 With switchgearcheck (as is) Total height2,3 m Floorspace3,2x1,3 m Weight1700 kg Extra Specificationswith extra screwsDouble screw extrudersWerner & PfleidererExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compar ...
used
General SKU300P748 LocationBarneveld MakeAPV Baker Industrial Extruder Division Ltd (UK) Mach.No.WEF960037 724/1 Main Features Motor3 KW Inlet diameter50 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Number of hours567 Screw diameter50mm L/D20 Co-rotatingcheck Number of heating zones:1 Steam heatingcheck Water coolingcheck AC-motor3,0 KW, 230/400 Volt With variable speed drivecheck Number of temperature controllers:1 Used onicecream MaterialStainless steel Information Year of construction1996 With switchgearcheck Floorspace2,6x1,2 M CEcheck Total height1,6 M Weight1100 KG Technical specs Extra informationscrews form stainless steelDouble screw extrudersAPV ProductsExtruders > Double screw extrudersBrand > APV Products What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- ...
used
General SKU011C013 LocationBarneveld MakeLeistritz TypeZSE-110 Year of construction1986 Main Features Motor110 KW Inlet diameter110 mm L/D20 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameter110mm L/D20 Counter rotatingcheck Number of heating zones:4 Electric heatingcheck DC-motor10-110 KW Information Mach.No.86.02.1822 With switchgearcheck Sizes switchgear120x70x230 CM Floorspace4,7x1,4 M Total height2,2 MDouble screw extrudersLeistritzExtruders > Double screw extrudersBrand > Leistritz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
General SKU103Y799 LocationBarneveld MakeBaker Perkins, Stoke on Trent TypeMPC/V30 Mach.No.65034 Main Features Motor3 KW Inlet diameter30 mm L/D14 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameter30mm, Screw length 420mm L/D14 Co-rotatingcheck Number of heating zones:3 (6x 200 Watt per zone) + die heater Electric heatingcheck Water coolingcheck DC-motor3,0 KW, 180 Volt With variable speed drivecheck Feeding with metering screwdia. 32mm Used ontoner Information Year of constructionunknown Floorspace2,0x0,9 M Total height2,0 M Weight820 KGDouble screw extrudersBaker PerkinsExtruders > Double screw extrudersBrand > Baker Perkins What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barn ...
used
General SKU042B319 LocationBarneveld MakeBerstorff TypeZE-130R Silicon tube extruder Mach.No.EO 2900/92 Main Features Motor90 KW Inlet diameter150 mm L/D10 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameter150mm L/D10 AC-motor90,0 KW, 380 Volt (Ex) Screw speed± 75 Rpm Information Year of construction1993 Floorspace4,0x1,2 M Total height2,3 M Weight6500 KG ATEX compatiblecheckDouble screw extrudersBerstorffExtruders > Double screw extrudersBrand > Berstorff What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
used approx. 30 m³ / 30000 litres steel tank interior coated double-walled above - ground - 2 steel base - good condition Dimensions: approx. Ø 2.00 m x about 10,00 m of the tank is coated from inside, double-walled and Get up 2 steel bases. Steel tank / container can be used as storage tank for water, manure, AHL, ASL, seeping juice, canola oil, edible oil, rain collection tank, and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de