double column milling used for sale

BALLISTRINE- linear profiler,/shaper-double sided 10 hp cutter head per side- follows your templates - shapes both sides- 9' table- hydraulic feed- material hold downs- $7,800

It is used in rubber and plastics mixing, warming mixing, sheeting mixing, etc. III Equipment specification XK400×1000 mixing mill 1. Main technical specification NO. Item Main technology data and feature A Main technology data 1 Roll diameter 400mm 2 Roll working length 1000mm 3 Roll linear speed Front:14.85m/min Rear:18.85m/min 4 Speed ratio of rolls 1:1.27 5 Max roll space 10mm 6 Compound feeding capacity 25kg-35kg 7 Motor power 37KW,n=980r/min，IE3 8 Dimensions 4400X1710X1850mm 9 Gross weight 8500kg B Feature of main machine 1 Roll size(mm) Ф400×1000 material alloy chilled hard cast iron, surface hardness HS70±2,Surface roughness: Ra0.2 Bearing type Adopt the aligning roller bearing, copper pressure ring, bearing taper 1:12 type Front roll is drilled roll and rear roll is drilled roll, can pass cooling water, e ...

Double D Rack oven 2006, stainless, single rack oven, timer and temperature controls, with fan and light, 45Kw, 3Ph

Euro taxes are payed, Rubber mixing mills for sale. Mills are technicaly like new, worked only in demo regime. Price includs test before loading, loading costs. 1 Roll diameter 400mm 2 Roll working length 1000mm 3 Roll linear speed Front: 14.85m/min Rear:18.85m/min 4 Speed ratio of rolls 1:1.27 5 Max roll space 10mm 6 Compound feeding capacity 25kg-35kg 7 Motor power 37KW,n=980r/minIE3 8 Dimensions 4400X1710X1850mm 9 Gross weight 8500kg

Profile Machining Center Machining length approx. 8,500 mm, max. profile size 300 x 200 mm, Travel XYZ = 9,300 x 1,000 x 800 mm, Sawing unit (mitre cuts), 4-axis drilling/milling unit (16 kW, 18,000 rpm), tool changer 24-fold option pendulum operation, option Clamping element displacement, preparation Flowdrill, , safety enclosure, BECKHOFF control panel (programming software CamQuix), refrigeration unit IDEA 16CCM-50-A-F-3 (No. C2019010009, year of construction 2019), Control cabinet, machine under power in production use Original price 176.500 EUR

x-travel:3200 mm y-travel:2000 mm z-travel:800 mm table-size:3200 x 1600 mm T-slot (width-distance-quantity):8x 22 x 180 mm max. table load:10 t distance between columns:1840 mm distance spindle nose and table:180~980 mm spindle drive:22/26 kW max. torque on the spindle:560/662 Nm spindle nose:50 BT spindle speed:6000 U/min rapid traverse X,Y:20000 mm/min. rapid traverse Z-axis:15000 mm/min milling feed range:1~10000 mm/min Machine size (LxWxH):8927 x 5217 x 4339 mm total power requirement:60 kva weight of the machine ca.:29 t positioning accuracy:0,025 (gem. VDI/DGQ3441) mm repeating accuracy:0,020 (gem. VDI/DGQ3441) mm CNC controller:FANUC 0i MF (mit AICC II, Ethernet DNC, fine mould package, machining condition selecting) gear box:BF Getriebe heat exchanger:für den Schaltschrank chip conveyor with chip bucket:2 Stk. Spirale, 1 Stk. Scharnierband CE-design:gegen Mehrpreis möglich (ve ...

x-travel:14000 mm y-travel:3100 mm z-travel:1.200 mm (220 - 1.420) mm distance between columns:4.417 mm table-size:14.000 x 2.500 mm workpiece weight:15.000 kg/m drive capacity - spindle motor:25 kW spindle cone:63 HSK spindle turning speed range:18000 rpm milling feeds:30000 mm/min dimensions of the machine ca.:15.000 x 8.418 x 6.033 mm weight of the machine ca.:135 t CNC controller: SIEMENS 840 D universal milling head:5 Achsen mit ?C5C? Elektrospindel automatic tool changer:24 fach

x-travel:8500 mm y-travel:4300 mm z-travel:1066 mm distance spindle nose and clamping angle:300-1366 mm distance between columns:3500 mm table-size:8000x3100 mm table load:30000 kg spindle taper:50 BT spindle speed:vertikal: 6000 1/min; horizontal: 2000 1/min spindle drive:30 kW Tool changer:60 CNC controller:Siemens 840 Scales:von Heidenhain in allen 3 Achsen automatic tool changer:Vertikal/Horizontal 60- fach Tool setter:von RENISHAW TS-27 fully enclosed:(oben offen) Automatic head changer 4 positions:inkl.90° Kopf & Verlängerung

x-travel:1600 mm y-travel:1300 mm z-travel:700 mm distance between columns:1500 mm distance spindle center to table:225-925 mm table-size:1800 x 1300 mm table load:4000 kg T-slot (width-distance-quantity):22x 160 x 8 mm spindle taper:HSK-A 63 spindle speed:24000 U/min spindle drive:25/33 kW Spindle motor torque:72.6/95.8 N.m. rapid traverse in x-y-z axis:30000 mm/min Cutting feed rate X/Y/Z axis:1~20000 mm/min Tool changer:20 fach max. tool diameter:100/130 mm max. tool length:300 mm max. tool weight:8 kg total power requirement:80 kva Weight approx.:22 t Machine size (LxWxH):5660 x 5295 x 3930 mm CNC controller:Heidenhain TNC 620 spindle:IBAG electric spindle 24000rpm HSK-A63 Scales:Heidenhain automatic tool changer:20 fach chip conveyor - auger:2 Stk. Used portal milling machine with extensive accessories at a special introductory price. Important manufacturers of the components used i ...

x-travel:1300 mm y-travel:1900 mm z-travel:800 mm distance spindle nose and table:180~980 mm distance between columns:1840 mm table-size:1650x1300 mm table load:4 t T-slot (width-distance-quantity):22x180x7 mm spindle cone:50 BBT spindle speed:10000 1/min spindle drive:15/18,5 kW Spindle motor torque:526 NM rapid traverse in x-y-z axis:20/20/15 m/min feeds:1~10000 mm/min Tool changer:24 -fach workpiece length:350 mm tool diameter:110/220 mm weight of tools max.:15 kg positioning accuracy:0,020|0,025|0,03 mm repeating accuracy:0,015|0,020|0,025 mm total power requirement:60 kva machine length:4900 mm machine width/height:4160×4339 mm Weight approx.:18 t automatic tool changer:24 fach :Gewindebohren ohne Ausgleichsfutter CNC controller:Heidenhain/Siemens/Fanuc gear box:von Barufaldi/Italien CE-design:gegen Mehrpeis möglich (TUEV) inner coolant:30 bar chip conveyor - auger:im Maschinenbet ...

x-travel:2300 mm y-travel:2000 mm z-travel:1000 mm table-size:2300 x 1600 mm T-slot (width-distance-quantity):8x 22 x 180 mm max. table load:8 t distance between columns:1840 mm distance spindle nose and table:180~1180 mm spindle drive:22/46 kW max. torque on the spindle:140.1/286.5 Nm (S6-25%) spindle nose:50 SK spindle speed:10000 (direkt) U/min rapid traverse X,Y:20000 mm/min. rapid traverse Z-axis:15000 mm/min milling feed range:1~10000 mm/min Machine size (LxWxH):7027 x 5217 x 4339 mm total power requirement:60 kva weight of the machine ca.:25 t positioning accuracy:0,020 (gem. VDI/DGQ3441) mm repeating accuracy:0,015 (gem. VDI/DGQ3441) mm CNC controller:Heidenhain TNC 620 automatic tool changer:Optional gear box:BF Getriebe (optional) chip conveyor with chip bucket:2 Stk. Spirale, 1 Stk. Scharnierband inner coolant:20 bar CE-design:vom TUEV Used Milling Machine KRAFT VM-3218 with ...

x-travel:3100 mm y-travel:3600 mm z-travel:1066 mm table-size:3200x2050 mm max. table load:10000 kg distance between columns:2800 mm distance spindle nose and table:300~1366 mm spindle drive:31 kW(S1)/40 (S6-40%) kW spindle nose:A100 HSK spindle speed:10000 U/min rapid traverse X,Y:12/12 m/min. rapid traverse Z-axis:12 m/min Machine size (LxWxH):8775x7140x7378 mm weight of the machine ca.:59 t positioning accuracy:X , Y , Z Axis : ±0.005/2000 mm; A Axis ? ±0.002 ° C Axis ±0.002 ° mm repeating accuracy:X , Y , Z Axis ±0.0055/2000 mm, A Axis : ±0.002 ° C Axis ±0.002 ° mm automatic tool changer:24 fach CNC controller:Siemens 840 UNIVERSAL AUTOMATIC A-C TYPE 2.5° MILLING HEAD (VG:AC52 mit A-/C-Achse linear guide:in X-Achse 4 Stück CE-design:als Option (verlängert die Lieferzeit) New Milling Machine KRAFT VM-5225 For more information please see the attached documents.

x-travel:1200 mm y-travel:800 mm z-travel:550 mm distance spindle center to table:150-700 mm distance between columns:920 mm table-size:1320x800 mm table load:2000 kg T-slot (width-distance-quantity):14x120x7 mm spindle taper:HSK-A 63/HSK-E 50 spindle speed:15000 (opt. 24000/36000) U/min spindle drive:7.5/11 (opt. 30/39; 20/26 kW Spindle motor torque:47.7/70 (opt. 29.1/37.8; 10.4/13.5) N.m. rapid traverse in x-y-z axis:30000 (opt. 40000) mm/min Cutting feed rate X/Y/Z axis:1~10000 (opt.1~20000) mm/min Tool changer:20 (opt. 24) max. tool diameter:100/130 (opt. 80/130) mm max. tool length:300 (opt. 220) mm max. tool weight:8 (opt. 4) kg total power requirement:30 (opt. 80) kva Weight approx.:12 t Machine size (LxWxH):5026x4276x3210 mm positioning accuracy:0,014 mm repeating accuracy:0,008 mm CNC controller:Siemens/Fanuc/Mitsubishi/Heidenhain automatic tool changer:20/24 linear scales:Heide ...

x-travel:1600 mm y-travel:1300 mm z-travel:700 mm distance spindle center to table:200-900 (opt. 225-925/250-950) mm distance between columns:1500 mm table-size:1800 x 1300 mm table load:4000 kg T-slot (width-distance-quantity):22x160x8 mm spindle taper:HSK-A 63/HSK-E 50 spindle speed:15000 (opt. 24000/36000) U/min spindle drive:15/18,5 (opt. 25/33 od. 20/26) kW Spindle motor torque:95/118 (opt. 72.6/95.8; 10,4/13,5 N.m. rapid traverse in x-y-z axis:30000 (opt. 40000) mm/min Cutting feed rate X/Y/Z axis:1~20000 mm/min Tool changer:20 (opt. 24) max. tool diameter:100/130 (opt. 80/130) mm max. tool length:300 (opt. 220) mm max. tool weight:8 (opt. 4) kg total power requirement:60 (opt. 80) kva Weight approx.:22 t Machine size (LxWxH):5026x4276x3210 mm positioning accuracy:0,014 mm repeating accuracy:0,008 mm CNC controller:Siemens/Fanuc/Mitsubishi/Heidenhain automatic tool changer:20/24 ch ...

:SD(W)-24 | SD(W)-28 | SD(W)-32 x-travel:6000/8000/10000/12000/14000/16000/18000/20000/22000/24000/360 00 mm y-travel:2400|2800|3200 mm z-travel:1100/1400 mm distance between columns:2450|2850|3250 mm w-axis:1500/2000 mm für SD(W) table width:1600|2000|2400 mm table length:= X-Weg distance spindle nose and table:SD: 1080mm ~2180mm (1020mm-2420mm); SD(W): 800mm~800mm+Z+W spindle cone:SK 50/BT 50 turning speeds:6000 U/min (mehr auf Anfrage) spindle drive:22/26 kW (mehr auf Anfrage) feed speeds:X/Y/Z/W: 12/12/10/1 m/min machine length:13,5m~43,5 m machine width:6,5|6,9|7,3 m Weight approx.:50t+2t/m|53t+2,3t/m|56t+2,6t/m automatic tool changer:32-fach CNC controller:Siemens/Heidenhain/Fanuc Telescope cover for guideways:für die X-Achse Scales:in X- und Y-Achse (W-Achse) cloth cover:für die Y-Achse (JAVARA) CNC controls from:Siemens/Fanuc/Heidenhain different kind of milling heads:90°/5-A ...

:VM-2018 | VM-3018 | VM-4018 x-travel:2300|3200|4100 mm y-travel:2000 mm z-travel:800 mm distance spindle nose and table:180~980 mm distance between columns:1840 mm table-size:2300x1600|3200x1600|4100x1600 mm table load:8|10|12 t T-slot (width-distance-quantity):22x180x8 mm spindle cone:50 BT/SK spindle speed:6000 (opt.10000) 1/min spindle drive:15/18,5|22/26|22/26 kW Spindle motor torque:560/662 Nm (bei 10000 1/min: 140/165 Nm) rapid traverse in x-y-z axis:20/20/15|20/20/15|15/20/15 m/min feeds:1~10000 mm/min Tool changer:32 -fach workpiece length:350 mm tool diameter:110/225 mm weight of tools max.:20 kg positioning accuracy:0,020|0,025|0,03 mm repeating accuracy:0,015|0,020|0,025 mm total power requirement:60 kva machine length:7027|8927|10327 mm machine width/height:5217x4339|5217x4339|5217x4339 mm Weight approx.:22|26|30 t CNC controller:Siemens/Fanuc/Heidenhain CNC controls from:Si ...

:VM-3225 | VM-4225 | VM-5225 x-travel:3200|4200|5100 mm y-travel:3000/3400 mm z-travel:800/1000 mm distance spindle nose and table:235~1235 mm distance between columns:2550/3050 mm table-size:3350x2200|4350x2200|5350x2200 mm table load:15|18|21 t T-slot (width-distance-quantity):28x250x13|28x250x17|28x250x21 mm spindle cone:50 BT/SK spindle speed:6000 (opt.10000, 15000) 1/min spindle drive:22/26 kW Spindle motor torque:560/662 Nm (bei 10000 1/min: 140/165 Nm) rapid traverse in x-y-z axis:15/18/10~15|12/18/10~15|12/18/10~15 m/min feeds:1~8000 mm/min Tool changer:32 -fach workpiece length:350 mm tool diameter:110/225 mm weight of tools max.:20 kg positioning accuracy:0,025|0,030|0,040 mm repeating accuracy:0,02|0,025|0,030 mm total power requirement:60 kva machine length:10125|12035|14035 mm machine width/height:6840x4515 mm Weight approx.:40|45|50 t automatic tool changer:32 fach CNC cont ...

:VM-3230 | VM-4230 | VM-5230 x-travel:3200|4200|5100 mm y-travel:3400 mm z-travel:1000 mm distance spindle nose and table:235~1235 mm distance between columns:3050 mm table-size:3350x2200|4350x2200|5350x2200 mm table load:15|18|21 t T-slot (width-distance-quantity):28x250x13|28x250x17|28x250x21 mm spindle cone:50 BT/SK spindle speed:6000 (opt.10000, 15000) 1/min spindle drive:22/26 kW Spindle motor torque:560/662 Nm rapid traverse in x-y-z axis:15/18/15|12/18/15|12/18/15 m/min feeds:1~8000 mm/min Tool changer:32 -fach workpiece length:350 mm tool diameter:110/225 mm weight of tools max.:20 kg positioning accuracy:0,030|0,035|0,045 mm repeating accuracy:0,025|0,030|0,035 mm total power requirement:60 kva machine length:10125|12035|14035 mm machine width/height:6840x4715 mm Weight approx.:40|45|50 t automatic tool changer:32 fach CNC controller:Siemens/Fanuc/Heidenhain chip conveyor with c ...

:SD(W)-36|SD(W)-42|SD(W)-48|SD(W)-54 x-travel:6000/8000/10000/12000/14000/16000/18000/20000/22000/24000/360 00 mm y-travel:3600|4200|4800|5400 mm z-travel:SD: 1100 mm (1400/1500) SD(W):1100 mm (1400/1500) mm distance between columns:3650I4250|4850|5450 mm w-axis:1500/2000 mm für SD(W) table width:2800|3400|4000|4600 mm table length:= X-Weg distance spindle nose and table:SD: 1080mm ~2180mm (1020mm-2420mm); SD(W): 800mm~800mm+Z+W spindle cone:SK 50/BT 50 turning speeds:6000 U/min (mehr auf Anfrage) spindle drive:22/26 kW (mehr auf Anfrage) feed speeds:X/Y/Z/W: 10/10/10/1 m/min machine length:13,5m~43,5 m machine width:7,7|8,1|8,5|8,9 m Weight approx.:60t+3t/m|65t+3,3t/m|70t+3,5t/m|75t+3,8t/m automatic tool changer:32-fach CNC controller:Siemens/Heidenhain/Fanuc Telescope cover for guideways:für die X-Achse Scales:in X- und Y-Achse (W-Achse) cloth cover:für die Y-Achse (JAVARA) CNC cont ...

:HDT-18|HDT-21|HDT-24 x-travel:2000/4000/6000/8000/10000/12000/14000/16000/18000/20000 mm y-travel:1800|2100|2400 mm z-travel:800/1000 mm distance between columns:1850|2150|2450 mm w-axis:N/A table width:1200|1500|1800 mm table length:= X-Weg distance spindle nose and table:555~1355 mm spindle cone:SK 50/BT 50 turning speeds:6000 U/min (mehr auf Anfrage) spindle drive:18,5/22 kW (mehr auf Anfrage) feed speeds:X/Y/Z: 15/15/12 m/min machine length:6,5~23,5 m machine width:5,9|6,2|6,5 m Weight approx.:20t+2t/m|22t+2t/m|24t+2,5t/m automatic tool changer:32-fach CNC controller:Siemens/Heidenhain/Fanuc Telescope cover for guideways:für die X-Achse Scales:in X- und Y-Achse (W-Achse) cloth cover:für die Y-Achse (JAVARA) CNC controls from:Siemens/Fanuc/Heidenhain different kind of milling heads:90°/5-Achs simultan/5-Seiten/Universal etc. CTS:40-70 bar heavy duty ram:550x550mm/650x650mm ATC:60/ ...

x-travel:2000/4000/6000/8000/10000/12000/14000/16000/18000/20000 mm y-travel:1300 mm z-travel:800 mm distance between columns:1350 mm table width:1000 mm table length:= X-Weg distance spindle nose and table:220~1020 mm spindle cone:SK 50/BT 50 turning speeds:6000 U/min (mehr auf Anfrage) spindle drive:18,5/22 kW (mehr auf Anfrage) feed speeds:X/Y/Z: 15/15/12 m/min machine length:6,5~23,5 m machine width:4,5 m Weight approx.:18t+2t/m automatic tool changer:32-fach CNC controller:Siemens/Heidenhain/Fanuc/Mitsubishi Telescope cover for guideways:für die X-Achse Scales:in X- und Y-Achse (W-Achse) cloth cover:für die Y-Achse (JAVARA) CNC controls from:Siemens/Fanuc/Heidenhain different kind of milling heads:90°/5-Achs simultan/5-Seiten/Universal etc. CTS:40-70 bar heavy duty ram:550x550mm/650x650mm ATC:60/90/120

Brand: GME Bavelloni Type: 2x Double Edger Model: MB 12 Linea, incl turning tables Construction year: 1995 Length mm: 4400 Width mm: 2800 Height mm: 2200 Transport size L x W x H: 4,4 x 2,8 x 1,3 Number of spindles: 4 x 12 spindles Condition machine : Working disassembled Photos/film available: Photos and video available Combi with: GME Triulzi Washing Machine Horizontal (23013)

pressure:1000 t stroke:800 mm total power requirement:45 kW weight of the machine ca.:97 t dimensions of the machine ca.:4500 x 4400 x 5300 m Return Capacity:40 t Main Cylinder:(d=500mm) 2 Stück :(140 x 80mm) 2 Stück speed of forward flow:40 - 110 mm/sec Return Speed:150 mm/sec Press speed (infinitely variable via PLC):3 - 12 mm/s Table size:3000 x 2300 x 200 mm Ram plate:3000 x 2300 x 1000 mm demand for oil:ca. 1300 l :210 l/min :600 sec :1500 x 150 mm Hydraulic and mechanical protection of the plunger Two-piece auxiliary motors with 2.2 kw Two-piece auxiliary pumps with a power of 6 L/min. Concurrency monitoring (0.5 mm/m²) Fast forward speed adjustable via plc Maximum deflection of the table at 0, 07mm/m²

pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec

pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :550 mm Ram plate:700 x 600 mm table height over floor:900 mm Table size:700 x 600 mm speed of forward flow:50 mm/sec Pressing speed:10 mm/sec :50 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,3 t dimensions:1150 x 2600 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück Heating panels (L x B) with 2 measuring sensors diagonally:550 x 500 mm Siemens Control System:S7 1200 Monitor:12 Zoll :2400 ? :1200 ? :1200 ?

CNC Double column Coordinate Boring Machine with Deep Hole Drilling Support Kolb KBN G 120 Year of manufacture 1984 / Retrofitted with Heidenhain TNC 426 in 2006 Table size 4250 x 2200 mm Table load max. 14 t Table longitudinal travel X 3000 mm Main spindle cross travel Y 2180 mm Deep hole drilling support cross travel A - 2000 mm Spindle vertical travel Z 500 mm Distance between the columns 2640 mm; Spindle to table 100 - 1300 mm; Spindle diameter 224 mm Spindle drive motor rating 46 KW Spindle speeds 14 - 1400 rpm Spindle taper ISO 50 Drilling in steel ST60 : 100 mm diameter; Boring to 300 mm; Threading to M 125 x 3; Milling capacity 730 cm³/min.; Second support for Deep Hole Drilling Spindle speeds for BTA and ELB boring 315 - 3150 rpm High pressure cutting oil delivery to spindle Chip- and oil collection and separation via Centrifuge. Very good condition P ...

pressure:100 t distance between columns:1000 mm stroke:500 mm Return Capacity:10 t Engine Output:10 kW :700 mm Ram plate:1000 x 700 mm table height over floor:1000 mm Table size:1000 x 700 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec Return Speed:25 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:6 t dimensions:3100 x 1000 x 2900 m

pressure:275 t distance between columns:3000 mm total power requirement:30 kW weight of the machine ca.:40 t draw back pressure:27 t pump capacity:Axialpumpe mit Proportionalventil :6000 mm :max. 3000 mm Table dimensions:6000 x 3000 mm table height over floor:700 mm distance between table / ram:1100 mm :450 l traversing speed:auf X und Y, 30-33 mm/sec. down speed:2-10 mm/sec :2-50 mm/sec. Cylinder hub:900 mm Cylinder diameter:440 mm Stestle extension:200 / 200 mm / Ø :40 mm Siemens Control System:S7 1200 Monitor Siemens 9":Touch Panel Tax desk:tragbar

pressure:300 t distance between columns:1900 mm stroke:600 mm total power requirement:30 kW weight of the machine ca.:27 t dimensions of the machine ca.:2900 x 3500 x 5400 mm Return Capacity:40 t Main Cylinder:Ø 370 x 350 mm :2 Stk. Ø 80 x 50 mm speed of forward flow:150 mm/sec Return Speed:150 mm/sec Table size:1800 x 1800 x 150 mm Ram plate:1800 x 1800 mm demand for oil:ca. 700 l :max. 900 sec Daylight Opening:900 mm pressure speed:15-8 mm/sec auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc Lineal mess stab NOVOTECHNIK:650 mm Table height above ground level (approx.):1000 mm Light sensors front and rear of SICK:900 + 150 mm Monitor:12 Zoll Hydraulic and mechanical protection of the plunger Two-piece auxiliary motors with 2.2 kw Two-piece auxiliary pumps with a power of 6 L/min. Concurrency monitoring (0.5 mm/m²) Fast forward speed adjustable via plc Maximum deflection of the ...

pressure:400 t distance between columns:2300 mm stroke:600 mm total power requirement:37 kW weight of the machine ca.:25 t dimensions of the machine ca.:3300 x 2800 x 5200 mm Main Cylinder:Ø 440 mm :2 Stk. Ø 100 x 60 mm speed of forward flow:200 mm/sec Return Speed:200 mm/sec Table size:2200 x 1400 x 150 mm Ram plate:2200 x 1400 mm demand for oil:ca. 900 l :max. 600 sec Daylight Opening:900 mm pressure speed:15-8 mm/sec auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc Lineal mess stab NOVOTECHNIK:650 mm Table height above ground level (approx.):1000 mm Light sensors front and rear of SICK:900 + 150 mm Monitor:12 Zoll Hydraulic and mechanical protection of the plunger Two-piece auxiliary motors with 2.2 kw Two-piece auxiliary pumps with a power of 6 L/min. Concurrency monitoring (0.5 mm/m²) Fast forward speed adjustable via plc Maximum deflection of the table at 0, 07mm/m²

pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t draw back pressure:20 t :1 Stück voltage:400 V frequency:50 Hz :24 V :Rexroth/Bosch dayligth:800 mm working area:1200x1000 mm :1200x1000 mm work height max.:1100 mm :170 mm/sek. :150 mm/sek. :15 mm/sek. quantity of oil:500 l :220 V memory:200 Programme :20-200 über Monitor t :5-170 mm/sec. :0-10 sec :2-10 mm/sec :750x950 mm :300 mm :5-50 t :2-80 mm/sec :1000 kg

pressure:100 t distance between columns:3000 x 1500 mm stroke:500 mm total power requirement:30 kW weight of the machine ca.:16 t dimensions of the machine ca.:4000 x 2500 x 4500 m Master cylinder:1 Stück main cylinder:135 x 90 Ø mm Auxiliary cylinder:2 Stück Auxiliary cylinder:90 x 50 Ø mm Table size:3000 x 1500 (mit T-Nuten) mm Ram plate:3000 x 1500 (mit T-Nuten & Federschweisungen) mm work height max.:900 mm pre-running speed:125 mm/sec return speed:100 mm/sec Speed printing phase:40 - 8 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC Controll:Zweihandbedienung Daylight Opening:600 mm fied interior wide:3100 mm auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc pre-run valve:2 Stk pressure stop valve:max. 200 min Lineal mess stab NOVOTECHNIK:550 mm Table parallelity:0,05 mm / m² Guide rails for parallelism :verschraubt Light sensors front an ...

pressure:500 t distance between columns:1500 x 800 mm stroke:800 mm total power requirement:45 kW weight of the machine ca.:25 t dimensions of the machine ca.:2200 x 2200 x 4800 m Master cylinder:1 Stück main cylinder:500 Ø mm Auxiliary cylinder:2 Stück Auxiliary cylinder:120 x 80 Ø mm Table size:1500 x 1400 (mit T-Nuten) mm work height max.:950 mm pre-running speed:190 mm/sec return speed:200 mm/sec Speed printing phase:20 - 8 mm/sek. Hydraulic block:REXROTH Oil Tank Capacity:1500 l demand for oil:1300 l pressure control:über PLC Daylight Opening:1200 mm fied interior wide:1500 x 800 mm auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc pre-run valve:NG pressure stop valve:max. 600 sec Lineal mess stab NOVOTECHNIK:850 mm Table parallelity:0,05 mm / m² column diameter:200 Ø / mm automatic fat lubrication:über Bildschirm einstellbar Guide rails for parallelism :4 fach Light  ...

PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM

Pressing force 160kN,pull cushion force 63kN,stoesselstroke 300 mm, pull-cushion stroke 150 mm, recessed height 500 mm, table 630x400,Stoessel 300x250,pull cushion flap 350x270,

Table diameter: 3100 mm Turning diameter: 3200 mm Turning height: 2000 mm Motor power: 0 HP/kW Positions ATC: 00   Positions APC: 0   MACH-id      5352 MAKE           BOST SA SPAIN TYPE             HYPRO 10 YOP              2000 SPECIFICATIONS Max. turning diameter Ø    3200 mm Table Ø       3100 mm Control         Conventionel Horizontal movement support        2000 mm Stroke ram left          1250 mm Stroke ram right        1250 mm Angle adjustment / ram swivable        30 ° Single column or double column        Double column Maximum turning height          & ...

Table diameter: 2000 mm Turning diameter: 1800 mm Turning height: 1250 mm Motor power: 35 HP/kW Positions ATC: 0   Positions APC: 0   MACH-id   4306 MAKE       WMW TYPE         DKZ 2000 x 1250 B YEAR         1976 SPECIFICATIONS Max. turning diamter  Ø  2000 mm Table / chuck size Ø     1800 mm Workpiece height     1250 mm Work piece weight   6000 Kg Horizontal movement support / ram    1150 mm Stroke support left ram      700 mm Stroke support right ram    700 mm Angle adjustment / ram swivable     30 Spindle speeds / ranges      50 Rpm Power     35 Kw DIMENSIONS Length      4100 mm Width       5300 mm Heig ...

Table diameter: 7100 mm Turning diameter: 8000 mm Turning height: 3240 mm Motor power: 0 HP/kW Positions ATC: 0   Positions APC: 0   MAKE  STANKO 3KTC TYPE   1580 L YEAR    Overhauled 2006 SPECIFICATIONS Controll  Conventionel Max. turning diamter Ø   8000 mm Table / chuck size Ø   7100 mm Workpiece height    3240 mm Work piece weight   125000 Kg Horizontal movement support / ram    4400 mm Stroke support left ram    2000 mm Stroke support right ram    2000 mm Angle adjustment / ram swivable   - 15 / - 30 Gr Live tooling    Milling spindlel 650 Rpm Singel column or double column Double column   Spindle speeds / ranges    19.6 Rpm DIMENSIONS Length   9000 mm Width     14000 mm Height ...

Ortlinghaus coupling outer diameter 680 mm from stock as good as new

pressure:400 t stroke:900 mm Table dimensions:1200 x 1200 mm Deep-Drawing Pillow:150 t travel away deep-drawing pillow:280 mm Daylight Opening:1100 mm

pressure:400 t distance between columns:3400 mm stroke:500 mm total power requirement:55 kW weight of the machine ca.:49 t draw back pressure:26 t pump capacity:131 Lt./min dimensions:7.900 x 5.500 x 4.300 mm :5000 mm :2800 mm table height over floor:700 mm distance between table / ram:1000 mm :700 l traversing speed:0-33 mm/sec. down speed:0-10 mm/sec :0-25 mm/sec.

pressure:200 t distance between columns:1900x1200 mm stroke:1000 mm total power requirement:44 kW weight of the machine ca.:32 t dimensions of the machine ca.:4793 x 3365 x 4779 m Hydraulic block:Bosch Rexroth demand for oil:800 l Sliding door front with a closing speed of:300 mm/sec open height:1400 mm Table Height:820 mm Ram Height:1000 mm Lifting capacity:20 t Lowering speed in the empty journey:80 bis 270 mm/sec Press speed:7 bis 25 mm/sec On driving speed:50 bis 170 mm/sec bending stiffness according to standard:0,2 mm Siemens Control System:S7 1200 Monitor:WEG 12 Zoll

pressure:100 t passage width:650 mm stroke:500 mm weight of the machine ca.:10 t dimensions:4800 x 1300 x 2650 mm return capacity:10 t :29 kW Max Working height:1000 mm :10 mm :10 mm/sec. :500 mm pestle plate:600 x 600 mm table plate:600 x 600 mm table height over floor:700 mm :600 l speed rapid traverse:10 mm/sec Oil cooling (electric):1,5 kW (max) Monitor SIEMENS:7 Zoll

Capazitat 300 Tone Table size 1,500 x 1,500 mm Stosselv creation 500 - 1,000 mm Piston x 400 mm Delete. Table - Stossel Minimum: 500 mm Maximum: 1,500 mm Machine height 4,000 mm Bottom of the floor 1,000 mm Top of the floor 3,000 mm Machine Weight 18.600 kg

ERFURT PKZZ 315 double column press manufactured in 1984 in Germany is used for, among others, cutting, machining, bending and punching sheet metal and strip metal. Features such as the ability of extensive workpiece machining, a large work table and a 315-tonne operating slider make the crank press ideal for mass production of things such as washing machine parts, agricultural machinery or other types of vehicles. The ERFURT mechanical press is also distinguished by its high-quality welded steel construction, ensuring excellent stability during the production process. The machine uses a slider with a beam ejector, which is adjustable within a range of 400 mm via a motor reduction gear with overload protection. In order to increase the life of the tools and the quality of the parts produced, the 2500 mm long and 1400 mm wide work table has been equipped with hydropneumatic cushions.  ...

Key data: 100 t

Technical data PDM100R-5393 Power [tm] 100 DIMENSIONS OF THE BOTTOM PLATE [mm] 900x600 DIMENSIONS OF THE UPPER PLATE [mm] 850x550 GUIDE COLUMNS (x4) [Ø mm] 50 WORKING HEIGHT [mm] 950 MAX. APERTURE [mm] 600 STROKE [mm] 420 FREEWHEEL SPEED [mm/s] 50-230 WORKING SPEED [mm/s] 2-15 WEIGHT [kg] 3000 SERVO POWER – PDM100R The new SERVO hydraulic units from Bosch Rexroth are designed to increase productivity and reduce energy consumption by up to 80% at a standstill, tool change and between the cycles. Increased efficiency in operation! EQUIPMENT - Proportional p/Q control with SvP5020 from Bosch Rexroth - Adjustable speed values on PLC. - AOPD photoelectric sensor technology - LCD display 12" - Configurable working parameters on PLC. - 50 pre-saved programs available on PLC. - Pre-filled valves for fast speeds - Maintenance-free bronze graphite bushings. - Simpl ...

Technical data Execution: milling Flat cams: max. diameter: 260 mm Bell cams: max. diameter: 250 mm max. height: 200 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 1600 mm Width: 900 mm Height: 1700 mm Various accessories: Coolant system Lamp Milling head

Control: REXROTH INDRAMAT System 200 BTV 20 Technical data Max. turning diameter: 200 mm Turret number of tools: 2 x 12 Max. workpiece height: 350 mm Spindle speeds: stepless up to: 8000 rpm Feeds: stepless up to: 5000 mm/min Voltage 50 Hz 3x: 400 Volt Motor power: 20 kW Machine´s weight about: 6000 kg Floor space required: Length: 3000 mm Width: 1700 mm Height: 3350 mm Various accessories: Full splash cabin

Table diameter: 2140 mm Turning diameter: 2200 mm Turning height: 1000 mm Motor power: 0 HP/kW Positions ATC: 0   Positions APC: 0   SPECIFICATIONS Max. turning diamter Ø  2200 mm Table / chuck size Ø  2140 mm Workpiece height  1000 mm Work piece weight  500 Kg Horizontal movement support / ram  2 x support mm