dosing used for sale

Size: 0300, outlet opening (300x300) mm, Operating overpressure 0.8 bar, Operating temperature: 120°C

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer : Collmann Type : 2x Hydo 24 chocolate depositor 1x hydraulic unit included YOM : 2001 Output : up to 25 cycle/min We offer this machine in as-is where it is condition, without warranty, ex warehouse/location (Incoterms EXW), without packaging ex warehouse Hess. Lichtenau (EXW),unpacked

MAGUIRE WSB 140R Gravimetric Blender Product Technical Data Sheet Design The Maguire Weigh Scale Blender Machine in good condition Contact person: Michał Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decorations Plant, Interior Systems 180 Gniewomierz 59-241 Legnickie Pole – Poland M +48660719841 Faurecia Legnica Decorations S.A. . with its registered office in Legnica, address: at Gniewomierz 180 street, 59-241 Legnickie Pole, F3660932 entered into the register of entrepreneurs of the Polish Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Division of the National Court Register, under the KRS No 0000874432, NIP (taxpayer identification number) 6912552442, share capital: 2.560.000,00 PLN (fully paid).

MAGUIRE WSB 140R Gravimetric Blender Product Technical Data Sheet Design The Maguire Weigh Scale Blender Machine in good condition Contact person: Michał Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decorations Plant, Interior Systems 180 Gniewomierz 59-241 Legnickie Pole – Poland M +48660719841 Faurecia Legnica Decorations S.A. . with its registered office in Legnica, address: at Gniewomierz 180 street, 59-241 Legnickie Pole, F3660932 entered into the register of entrepreneurs of the Polish Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Division of the National Court Register, under the KRS No 0000874432, NIP (taxpayer identification number) 6912552442, share capital: 2.560.000,00 PLN (fully paid).

For sale is a laminating resin system from IMT SpraySystems. The plant is in very good condition, it has been properly shut down by personnel of the machine manufacturer and filled with mesamol for protection. New price of the system is 85000.-€. The system was cleaned and visually prepared. Circuit diagram, operating instructions and maintenance overview are available. The systems were regularly inspected by the manufacturer as part of a maintenance plan. Applications: Wind power (offshore and onshore) Shipbuilding Lightweight construction Automobile industry Railways (e.g. for the sealing of track beds) Aircraft construction (especially for the construction of the individual components) Corrosion protection Concrete renovation Chemical Resistant Equipment Wastewater (especially in the sewerage system) On request, at an additional cost, the machine can undergo factor ...

With spare parts and documents;

Rotary knob is missing

v.v. 4 cylinders; 32 cup fillers; conveyor belt 1800x1000 mm; Ø output heads 12 mm; 2 Cleaning - Connections

Linear feeder, Consisting of 2 chutes of the same type, Air pressure controlled valve at the end, Each chute 220 V - 50 hz - 0.55 A,

With spare parts and documents;

1x damaged

Rheon Cornucopia Type: KN200 Dough pieces: 10-300 gr. Capacity : 10-60 pieces/min digital control Stainless steel cladding rollable on wheels Height: 160cm Width: 80cm Depth: 150cm

Number of filling stations: 10, with hoses.

with compressed air with lift to the top Stainless steel version medium sized funnels Manufacturer: Unknown

Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation.

Number of filling stations: 8, throughput: 30 cycles/min, connected load: 6kW, with heated double jacket on the storage container, accessories, filling heads, screw conveyor, conveyor belt and documentation, on-site inspection is possible.

Suitable for filling sausages, as well as potato and sausage salads, caliber: 55/60mm, throughput: 3-4 sausages/min, capacity per hopper: approx. 100kg, year of construction: 90s, without documentation, an on-site inspection is possible.

including documentation, without accessories or spare parts.

There are one CANNON A System 100 Pro and one CANNON A-10 System Servo available, year of construction machine 1/ 2: 1995/ 2002, including documentation.

Software included, an inspection is possible.

For trouble-free operation at high throughput rates of cable recycling systems, a constant and adapted feeding of cold cable material is crucial. So that an employee does not have to constantly check or carry out the material, the use of a dosage makes sense. With a volume of approx. 1.5 m³, this offers a sufficient stock to ensure the independent operation of a plant. The conveying speed is simply regulated by a handwheel on the gearbox and the layer height on the conveyor belt can be adjusted appropriately by a slider.

Powder machine PM 1000 Z , Fabr. PEKU / Germany

We sell here a portioner / screw conveyor from the manufacturer Meyn in a good used and functional condition. Runs on 400 volts, year of construction 2001, completely stainless steel, speed adjustable, rollable, for loading and portioning, 100 liter funnel, workshop tested, ready for immediate use, dimensions W/D/H 150/110/230 cm, others on request.

Gravimetric dispenser Brand: Maguire. For 4 different materials plus master dispenser. No electrical panel.

Device characteristics: Number of bars: 48 per minute. Hopper capacity: 7 litres. Weight: from 10 to 80 g ( depending on the stamp ). Dimensions ( L x W x H ): 500 x 400 x 650 mm. Total weight: 27 kg.

Hop-Injector - Dry Hopping New system in different sizes.

Glue melter, glue machine, hot glue machine, industrial hot glue gun, hot melt glue gun -Module for: hot glue system -Number: 4x available -Price: per piece -Dimensions: 100/30/H30 mm -Weight: 0.3 kg

Cutting block Manufacturer: Südmo / Germany 2 digits with automatic venting Year of construction 1994 Mobile Further information and price on request

Petkus Pickler CT 5-25 t/h, pre-tank, finishing electr. Scales, recontainers, sliders, e-detectors, control cabinets For Sale Tel. 01715213204

Separating drum/ model ATS Year of construction 2008 Dimensions: LxWxH = 1.40 x 0.68 x 1.35m

Volumetric dosing machine – ALCOS • Year: 2012. • Speed: o From 500 mg – 4.800 pz/h. o From 500 a 1.000 mg – 2.400 pz/h. • Direction: Linear. • 2 heads. • Volumetric filler. • Safety protections.

General SKU356S855 LocationBarneveld MakeHasler AG (CH) TypePowder dosing unit No.14175/ 13540 Year of construction1997 Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume200 Ltr. Motor1.5 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity200 Ltr Vessel sizesdia. 600x1350mm Conical bottomcheck Flat top sidecheck With covercheck Top connectionsDN 150 (1x), DN25 (3x) Outletdia.72mm Max. temperature160 degr.C. With paddle stirrercheck Motor1,5 KW, 220-240/380-415 Volt (Ex) MaterialStainless steel 1.4435 (316L) Information Floorspace0,9x0,9 M Total height2,4 M Weight650 Kg ATEX compatiblecheck Extra Specificationswith TURBODISK type 75 /360degr. sprayer, Capacity 80 Ltr/H (2 bar), Material HastelloyStirring vesselsHaslerStirring vessels > Stirring vesselsBrand > Hasler What you can expec ...

General SKU209U527 LocationBarneveld MakeBohle TypeBVS No.0412366015 Year of construction2005 Main Features MaterialStainless steel Length880 mm Specified Features - Vibro feeder MaterialStainless steel 1.4404 (316L) Vibro feedercheck Feeder diameter100mm Feeder length880mm (center to center 750mm) Closedcheck With hoppercheck InletDia: 100mm OutletDia:130mm With vibro motorcheck Information Mounted on framecheck With switchcheck With switchgearcheck(as is) Weight190kg CEcheck Floorspace1,52x0,7 Total height1,43m Extra SpecificationsThis machine is equipped with a Mettler Toledo ID7 with printer (as is). Vibro feedersLB BohleConveying systems > Vibro feedersBrand > LB Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect th ...

General SKU225T219 LocationBarneveld MakeAlfa Laval TypeTV No.PH 139576 Year of construction1982 Main Features MaterialStainless steel Volume400 Ltr. Motor0.55 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity400Ltr. Vessel sizesDia:1000x1200mm Conical bottomcheck Dished top sidecheck With covercheck Manholecheck Dia: 420mm Top connectionsDia: 50mm (3x) OutletDia: 80mm With paddle stirrercheck Motor0.55kW, 220/380Volt, 1380rpm Speed mixing shaft102rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Information Mounted on legscheck Weight350kg Floorspace1,3x1,2m Total height1,8mStirring vesselsAlfa LavalStirring vessels > Stirring vesselsBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- ...

General SKU392U1285 LocationBarneveld MakeK-tron / Burgener TypeK-PH-MV-KT20 / AFS002 No.1102400/M-984900 Main Features MaterialStainless steel Motor0.75 KW Inlet diameter200 mm Specified Features - Metering screw Metering screwcheck Screw diameter± 25 mm (2x) Pitch± 10 mm Screw length300 mm With hoppercheck Hopper sizesdia. 200x220 mm Inletdia. 200 mm OutletDN40 With motor0,75 kW Screw speedmax. ± 460 rpm: With breaking/mixing shaftcheck (max. ± 21 rpm) Motor0,75 kW Metering screws MaterialStainless steel 1.4401 (316), Stainless steel 1.4404 Information Year of construction2011 Mounted on framecheck Mounted on legscheck Mounted on wheelscheck CEcheck With switchgearcheck Floorspace1,4x0,8 m Total height2,4 m ATEX compatiblecheck Extra SpecificationsThe filling plant allows for the semi-automatic filling of biologically highly active, hygroscopic,  ...

Dürr Ecoclean 79W KVI parts washer The Dürr Ecoclean KVI system enables the cleaning of a wide variety of workpieces, both in the injection/flood cleaning process and for a limited period of time in the spraying process. The KVI cleaning system is characterized by a modular design. This means that a maximum of three systems can be connected in series with this type of cleaning system. The control as well as the data entry is done via the control panel of the 1st module, the other two modules can be controlled from there. The main advantage of this modular technology is that different treatment media can be used and thus almost all surface treatments / cleanings can be carried out. Compared to conventional cleaning methods, the Dürr Ecolean KVI system achieves very good cleaning results, especially for bulk materials, workpieces with hollows, threaded holes, blind ho ...

Liquid dosing unit (oil dosing unit) Dosing unit with 12 dosing nozzles For automatic filling of cups, containers, trays, thermoformed packaging, etc. designed with 6 filling flow outputs with SIEMEN SIMATIC S7 – 300 PLC controller Hopper (capacity) up to 55 litres Dosing unit with 12 dosing nozzles Equipped with 6 filling stations (each with 2 dosing nozzles) Dimensions set-up for the machine: 75 x 150 x 220 cm (W/D/H)

Horizontal packaging machine for the automatic production, filling and sealing of stand-up pouches with regular and irregular shape, with hanging hole, without zipper. Suitable for big stand-up bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. Any dosing unit and/or other modules (such as conveyo ...

Used line for packing product into cups by FDPm type PAK 2LTF. New 2015. Power supply 3 x 400 V Power 6.5 kW Pressure 6-8 bar Weight 3400 kg Technical specifications: 1. the control of the machine is supervised from the control panel Mitsubishi controller. The machine operates in an automatic cycle. The controller has the following operating programmes: - automatic operation mode with control of the product level in the tank - presence of packages - cyclic operation mode - one cycle - dose regulation The control system switches off the dispensers in the following cases: - lack of pressure - opening of covers - lack of packaging The control system is also equipped with: - visual and acoustic signalling of the operating state 2. Control cabinet - IP 65, located inside the unit, equipped with ventilation and a heat sink. In addition, the electrical cabinet an ...

Linear weight filling machine, consisting of three filling stations for filling different components (meat, vegetables, carbohydrates), as well as a pre- and post-dosing of vegetable brew., Output: up to a maximum of 600 glasses/h, Functionality:, Manual entry of empty glasses,, pre-dosing of vegetable stock,, Platform with weighing cell for filling the first component using a dosing screw,, Pneumatic tamper to better distribute the product in the jar,, Platform with weighing cell for filling the second component using a dosing screw,, Pneumatic tamper to better distribute the product in the jar,, Platform with weighing cell for filling the third component using a dosing screw,, Pneumatic tamper to better distribute the product in the jar,, Full dosing of the glass with vegetable stock (vacuum filler, 1 station),

COMPLETE PANCAKE LINE for the production of plain, cherry, apple, pineap-ple, etc. pancakes Very little used, only 3 weeks in test production After that the management decided to invest more in existing pizza line and cancelled new products pancakes Pancakes 32g ø 80mm (According to pre-owner) â?¢ SCHENK T4096-5035-8 V1.0 contact fryer For baking of dough or meat products competely stainless steel, electrical heating, total length 11 m turning station, complete with 2 DáBáR TSA 800 fat spraying units 22 noz-zles, only used for testing purposes, like new â?¢ ALIMEC DOSATRICE dosage unit Closed for dough with 22 dosing heads with a max. dosing weight of 36 g per dosing head, only used for testing purposes, like new â?¢ MONDINI DTT/LC80 Dosing line for fruit pieces, 22 dosing heads, only used for testing purposes, like new â?¢ 2 DOMINO transport trolley ...

Dismantled CONCRETE PLANT Easy to operate and ready relocation. Horizontal concrete plant type «ROME CZ 5P24B» with a capacity of 65 m3 / h of fresh concrete or 45 m3 integrated vibrated concrete with additional equipment + heating system ACV. The concrete unit consists of units: - storage boxes for gravel 5 units 150m3/unit (galvanized version), - vibration system, mounted on two outlet cones each consisting of a 260 W vibrator mounted on a special plate with all the necessary electrical equipment - scale for gravel, 4 units, maximum load capacity 2400 kg, 12m3 geometric volume each, vibrator 180 W - scale for cement, maximum load capacity 600 kg, 3 units weighing cells, EC certificate, volume of the bunker 480 L, pneumatic hood fi 323 mm, pneumatic vibrator VPC 1 piece - compressor and pneumatic equipment, volume 270 L, air flow 462 l/min, compressor 3 kW - planetary m ...

Würschum semi-automatic 4-fold filling line Pneumatic filling machine with four filling stations For liquid and viscous products The filling machine has a pneumatic drive for the linear movement of the dosing piston in the stainless steel cylinder. Limit switches define very precisely the volume that the dosing piston sucks in. The dosing volume is set manually with a milliliter scale and a handwheel. This model requires only a compressed air connection, electricity is not required. The suction and dosing speed can be adjusted to the product viscosity by means of throttle valves. With an optional pneumatic manual screwdriver, the containers can be closed immediately after filling. The machine table can be rolled and can be moved to another room for cleaning after the end of production. Applications: Production and Laboratory Chemical industry Cosmetics i ...

Complete vertical packaging system for dosing coffee beans AND ground coffee and packaging in coffee stand-up pouches with aroma valve. The system is equipped with two separate dosing systems (auger filler for powder, volumetric cup dosing unit for granules) and also has a Z-conveyor, screw conveyor, outfeed conveyor and an AMTEC PRO P60XL as VFFS packaging machine. A hot stamping printer for date, batch number (optional: thermal transfer printer on request), an anti-static module, stand-up pouch module (gusset device) and flat-bottom module (bottom seam is applied tightly to bottom, depending on the film material) are also part of the equipment. - Specifications VFFS: Stable film pulling by vacuum | MITSUBISHI/SIEMENS PLC, WEINVIEW touch screen operator interface | mark sensor registration control | quick change former assembly, pneumatic sealing unit | servo motor film pulling | bag si ...

Complete vertical packaging system for dosing coffee beans AND ground coffee and packaging in coffee stand-up pouches with aroma valve. The system is equipped with two separate dosing systems (auger filler for powder, volumetric cup dosing unit for granules) and also has a Z-conveyor, screw conveyor, outfeed conveyor and an AMTEC PRO P60L as VFFS packaging machine. A hot stamping printer for date, batch number (optional: thermal transfer printer on request), an anti-static module, stand-up pouch module (gusset device) and flat-bottom module (bottom seam is applied tightly to bottom, depending on the film material) are also part of the equipment. - Specifications VFFS: Stable film pulling by vacuum | MITSUBISHI/SIEMENS PLC, WEINVIEW touch screen operator interface | mark sensor registration control | quick change former assembly, pneumatic sealing unit | servo motor film pulling | bag siz ...

Horizontal packaging machine for the automatic production, filling and sealing of stand-up pouches with regular and irregular shape, with hanging hole, with a spout on top. Suitable for small stand-up bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Two bags are handled per machine cycle, whereby a higher output will be achieved per minute. 2 dosing units are needed and accordingly 2 charging hopper are mounted. The possibility to upgrade the machine with two additional dosing units and charging hoppers does exist, either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperatu ...

Horizontal packaging machine for the automatic production, filling and sealing of stand-up pouches with regular and irregular shape, with hanging hole, without zipper. Suitable for small stand-up bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Two bags are handled per machine cycle, whereby a higher output will be achieved per minute. 2 dosing units are needed and accordingly 2 charging hopper are mounted. The possibility to upgrade the machine with two additional dosing units and charging hoppers does exist, either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature mo ...