Model
(Manufacturer: DOOSAN)
Key data: 800 mm, 450 mm, 510 mm
Doosan DNM 4500 Vertical Machining Center (VMC) Year of construction: 2016 Condition: Used – in very good working condition Well-maintained Doosan DNM 4500 vertical machining center, ideal for precision milling and general machining. Technical specifications: X-axis travel: 800 mm Y-axis travel: 450 mm Z-axis travel: 510 mm Rapid traverse (X/Y/Z): 36 / 36 / 30 m/min Spindle speed: up to 8,000 rpm Spindle power: 18.5 kW Spindle torque: 117.8 Nm Tool changer: 30 positions Table size: 1,000 mm Max. workpiece weight: 600 kg Machine weight: approx. 5,000 kg The machine has been regularly maintained and is in good condition. Inspection under power is possible.
Key data: 2160 mm, 762 mm, 650 mm
For sale : Doosan vertical machining center type DNM 750L II with a Heidenhain i TNC 620 controller. Very nice machining center like new. Available at short notice. Includes tool holder and machine clamps. X-, Y- and Z-axis movement 2,160 762 x 650 mm. Cooling by the spindle with 70 bar high-pressure, chip conveyor with right ejection, Renishsow workpiece measuring system, etc.
Inv. Num. : 9033 Type: PUMA ST32G Producer: DOOSAN Created: 2018 Parameters: Control System: FANUC Series 31i Model B Switch-on hours: 4,360 h Hours: 2,443 h Maximum turning diameter: 32 mm Max. turning length: 320 mm Maximum spindle speed: 8000 1/min Axis Z: 320 mm Rapid traverse X/Y/Z: 32 m/min Spindle diameter: 32 mm Length: 2640 mm Width: 1400 mm Height: 1840 mm Weight: 3500 kg Equipment: Technical documentation Chip conveyor High-pressure cooling 70 bar IEMCA BOSS 338 Bar Feeder Oil mist extraction Losma
DOOSAN VM 960L CNC machining center was built in 2016 in South Korea by Doosan Machine Tools. The machine on offer is an excellent choice for both roughing and finishing machining of workpieces with a maximum weight of 4500 kg. It is distinguished by a number of state-of-the-art technical solutions, which, combined with extensive equipment, guarantee excellent repeatability of the manufactured parts over many years of intensive operation. All machining processes, i.e. drilling, threading and milling, are performed by means of a reliable spindle and cutting tools taken from a 40-position magazine. The very accurately balanced spindle ensures vibration-free operation at all speeds. Its taper is cleaned continuously with compressed air to protect it from chips and coolant. The entire workspace, in turn, has been fully maximised to ensure freedom of operation. The offer also includes a ...
Key data: 376 mm, 760 mm
Description CNC turning-milling center Doosan Puma 2600 SYII with Fanuc control i series with accessories The machine has been used little, has about 2000 hours of operation so like new and is available now Additional Accessories Lathe Doosan Puma 2600 SY II -2 tool holders for external turning tool 25x25 -1 tool holder double for external turning tool 25x25 -1 tool holder for frontal machining 25x25 -2 tool holders for internal turning tools (boring rods) diameter 50mm -1 tool holder double for internal turning tools diameter 32 mm -1 tool holder for parting tool -1 tool holder double right for external tool (sub-spindle) -1 tool holder double left for external tool (main spindle) -4 motorized tool holders ER-32 radial (X axis) -5 Motorized Tool Holders ER-32 Axis (Z Axis) -1 motorized tool holder ER-32 radial (X axis) with internal coolant supply -1 motorized tool hold ...
Key data: 700 mm, 5050 mm
CNC Turning Milling Center Manufacturer: Doosan Type 700XLY ll Year of construction 11/20 IBN 2021 Control Fanuc iSeries Plus max. turning length 5050mm max. turning diameter 900mm 12-fold tool turret, all 12 of which are driven Full Y-axis and C-axis Switch-on hours approx. 25,000 on 22.05.25 Spindle hours approx. 5,000 on 22.05.25 Machine is in a very good condition. As accessories there are A large bezel SMW Three-jaw chuck 630mm Face Plate 800mm div. Powered Tools Various steel holders Accessories had cost 80,000 euros Machine is sold due to the poor order situation
Key data: 3000 mm, 850 mm, 800 mm
For sale Doosan 5-axis machining center type 850 LSR. equipped with a Fanuc control system, Key technical data (VCF 850LSR Travel (X/Y/Z): 3000 / 850 / 800 mm Table dimensions: 3500 x 870 mm Maximum table load: 3500 kg (incl. integrated turntable) Integrated rotary table (C-axis): Ø 800 mm B-axis (spindle inclination): 220° (+110° / -110°) Spindle speed: 12,000 rpm (standard) Spindle power: 18.5/22 kW (Fanuc) Spindle taper: BT40 (BIG-PLUS) Tool magazine: 60 stations (chain magazine) Rapid traverse (X/Y/Z): 40 m/min Machine weight: approx. 24,000 kg The machine is available from stock, subject to prior sale. For more information; Send an e-mail to chrismachinematch.nl
Control: Siemens Sinumeric 828 D Turning length: 1,600 mm Turning diameter: 900 mm X axis travel: 470 mm Z axis travel: 1,650 mm Speed: 3 – 1,500 rpm Tool turret: 12 places (all driven) Tool holder: BMT 85P Equipment: Self-centering bezel Conveyor Touchsetter 3-jaw chuck Programmable tailstock Aspirator Coolant pump 20bar with cyclone filter Oil mist extraction
Control Fanuc Max.workpiece diameter ... 800mm Table diameter ... 450mm Max. workpiece height ... 750mm Axis Z ... 780mm Number of positions in the tool changer ... 8 Axis X ... 390mm Axis Z ... 780mm Table speed ... 20-2000 rpm Main engine power ... 30/37kW Max. spindle torque ... 2243/2766Nm Machine weight ... 9000kg L x W x H ... 2000x2800x3300mm
Accessories: Loading bucket KSW 3.5 m³, 2,600 mm Loading bucket KSW 2.1 m³, 2,600 mm Quick coupler KSW L70
Key data: 376 mm, 760 mm, 3500 1/min
Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore.: 86mm With jacket tube.:78mm Revolver head.: 12 main positions 12 secondary positions, BMT65 connection, Sub spindle: 4500 1/min Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw Tool speed max=5000 1/min X movement range.: 260mm Z axis movement range.: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed.: 30m/min Automatic tool measurement with probe arm Weight.: 6450 kg
Key data: 370 mm, 712 mm, 3500 1/min
DOOSAN LYNX300M (34000euro) -:CNC FANUC - Chuck diameter: 250 mm - Diameter over bed: 651 mm - Max. turning diameter: 370 mm - Max. turning length: 712 mm - Spindle bore: 76 mm - Spindle speed: 3,500 rpm - C-axis - Main spindle motor: 15 kW - Rapid feeds X/Z: 30/24 m/min - BMT 55 turret: 12 positions - Rotating tool speed: 5,000 rpm - Machine weight: 4.5 t - Overall dimensions: 3 x 1.8 x 1.7 m
Key data: 376 mm, 760 mm, 3500 1/min
Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore.: 86mm With jacket tube.:78mm Revolver head.: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic Tailstock.: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range.: 260mm Z axis movement range.: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed.: 30m/min Automatic tool measurement with probe arm Weight.: 6000 kg
CNC Table Type Horizontal Boring Mill Doosan DBC 130II. S/No. MB0003-000435 New in 2013 Control Fanuc 31i-MA Spindle Dia. : 130mm Travel : XYZ – 3000/2000/1600 mm W – 700 mm Rotary Table (1/1000 ͦ) Size : 1600 x 1600 mm 2 Pallets Spindle Speed : 2500 rpm Tool type : BT50 ATC : 80 tools
The machine is in good technical condition, a visit and test drive is possible by prior arrangement. - Spindle passage 65 mm - without driven tools, with replaced bearings and belts.
The machine is in good technical condition, a test run is possible by prior arrangement. Hours: 8,981 Upper driven tool turrets with Y-axis, lower driven turret, double slide with two spindles. Control: FANUC 31i-B. Max. circumferential diameter above the bed: 300 mm Max. circumferential diameter over the support: 230 mm Max. turning diameter above the bed with upper turret: 230 mm Max. turning diameter above the bed with lower turret: 230 mm Max. turning length: 600 mm Max. distance between the ends of the right and left spindle: 980 mm Milling area outside the axis of rotation due to Y-axis: 100 mm (+/- 50 mm) Max. rod diameter (left spindle): 65 mm Max. rod diameter (right spindle): 65 mm Max. permissible workpiece weight without sub-spindle (incl. chuck weight = 23 kg): 12 kg Total weight: 7,800 kg Accessories: SS 2500 bar feeder, length 200–1 ...
Key data: 48 KW, 60 kVA, 400 V
ON HAND STAGE V 30 months warranty Stamford Alternator ComAp Control Generator Set Specifications: Model: EQ-DSV4536 Primary power: 60 kVA / 48 kW Standby power: 60 kVA / 48 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine Make: Doosan Engine Model: D34 Displacement (L): 3.41 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Emissions: Euro Stage V Dimensions of the generator set: Length: 2430 mm Width: 1056 mm Height: 1600 mm Weight Open: - kg Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Preheater (or preheater) Lubricating oil and antifreeze Batteries and cables Elect ...
Vertical machining center DOOSAN DNM 650, control system FANUC
used
Max Turning diameter 480 mm Max Turning lenght 790 mm Main spindle speed 2800 rpm Sub spindle speed 4500 rpm Main spindle power 22 kw With 4 pieces life tool
used
CNC Model: Fanuc - CNC Version: 18i - TB - Main Spindle Nose: ASA 8 - Main Spindle Power: 26Kw Main spindle bar passage: 81mm - Turning diameter: 300mm - Turning length: 350mm - Main spindle speed: 3500 Number of tool turrets: 2 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 255mm Y-axis travel first turret: +- 60mm First turret Z-axis travel: 800mm Number of second turret tool positions: 12 Number of motorized second turret: 12 Second turret X-axis travel: 190mm Second turret Z-axis travel: 900mm Fast feeds for linear axes X Y Z: 24m/min Sub-spindle: yes Spindle nose: ASA 8 Number of counter-spindle speeds: 3500 Counter spindle power: 26Kw Bar Passage: 81mm Z stroke sub-spindle : 810mm Chip conveyor: belt Presetting: yes Machine equipment: Machine supplied wit ...
For sale: Powerful Doosan vertical machining center type Mynx 7500/40, equipped with the well-known control system of the Fanuc i-series including Fanuc Manual Guide i dialog area. This model, with a net weight of 13,500 kilograms, has an X, Y and Z axis displacement of 1,525 x 762 x 625 mm each. The table size is 1,600 x 750 mm. The machine is fully equipped with block guides. The pivot shot is an ISO 40 shot. The machine has a so-called arm changer with 32 positions and is also equipped with cooling through the spindle. As an extra, the machine is equipped with an integrated fourth Nikken axle with counter center. The machine also has a right-hand discharge chip conveyor. On request, you can purchase additional tool holders for the machine. The machine is in excellent condition and for more information please send an email to chrismachinematch.nl
used
:::TECHNICAL SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 18-T - Spindle Nose: ASA 6 - Spindle Power: 18.5Kw - Turning Diameter: 310mm Turning length: 200mm - Main spindle speed: 3500 - Sub spindle speed: 3500 Number of tool positions for the first turret: 12 Number of fixed tool positions for the first turret: 12 Number of second turret tool positions: 12 Number of fixed tool positions for the second turret: 12 :::D DIMENSIONS AND WEIGHT::: Length: 2800mm Width: 2240mm Weight: 7000Kg
Key data: 330 mm, 730 mm, 3500 1/min
Stock number: 3953 CNC LATHE Manufacturer: DOOSAN, Type: S390 LM Aircraft NO.: LNV-1019, Year of manufacture: 2001 Specifications: Max. circumferential diameter 330 mm dia. Turning length 730 mm Turning over planing slide 580 mm dia. Main motor power 22 kw Main spindle speed range 3500 rpm Hole through drawing tube 77 mm dia. X axis movement 245 mm Z ash movement 750 mm Tool turret with 12 stations Powered stations revolver 1 12 pieces. Total power consumption 40 kva Control Fanuc 18I Fabr. Spindle operating hours 9482 hours Accessories: Hydr. Chuck main spindle 300 mm dia Chip conveyance. Tailstock Length: 6550 mm, Height: 2200 mm, Width: 2200 mm, Weight: 5000 kg
Inv. Num. : 8094 Type:- Producer: Doosan Created: 2023 Parameters: Maximum load capacity: 25 kg Inclination: 2700 mm Working Range: 360
Key data: 48 KW, 60 kVA
We currently offer: Number 47 Doosan generator set Type: G60 Engine John Deere Type: CD4045G Generator Leroy Somer Power 60.4 KVA / 48 KW Hz 50 RPM 1500 AVR control R438 Year of construction 2012 Hours: 17727 Diesel pump missing You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
Turning Diameter 830 mm Turning lenght 750 mm Spindle speed 2000 rpm Controller FANUC-i Chuck size 24"
Inv. Num. : 7971 Type: Lynx 2100 LYB Producer: Doosan Created: 2022 Parameters: Control system: Siemens Sinumerik 828D Maximum turning length: 510 mm Max. turning diameter: 300 mm Maximum length of travel in the X-axis: 205 mm Maximum length of travel in the Y-axis: 105 mm Maximum feed in the Z-axis: 560 mm Maximum main spindle power: 15 kW Maximum spindle speed: 4500 1/min Length: 2880 mm Width: 1711 mm Height: 1921 mm Weight: 3900 kg
Control Fanuc ... i Series Turning diameter ... 600mm Turning length ... 330mm Inclined bed Spindle bore ... 61mm Turret Circumferential diameter over bed ... 600mm Circumferential diameter via support ... 400mm Axis X ... 205mm Axis Z ... 340mm Rapid traverse of the X axis ... 30m/min Rapid traverse of the Z axis ... 36m/min Spin speed... 0-6000 rpm. Max. spindle torque ... 127Nm Main engine power ... 11/15kW Doosan Robot Cell Assembly: 2x LYNX 2100A + ROBOTEC APC7 (Fanuc AM-100 iC6L) - The machines are supplied with chucks and pliers - High pressure cooling 20bar - Arm for picking up workpieces (Ø65 x L130 mm, weight 3 kg) - Automatic door opening - Spindle bladders for cleaning the clamping jaws - Oil separator - OIL SKIMMER - Tool Load Monitor (works with X-, Z-axis and S-spindle) - Workpiece conveyor The machine is in good condition, possible to test un ...
Key data: 760 mm, 1540 mm
CNC turning/milling center DOOSAN PUMA MX2600ST Year of construction 08-2012 Fanuc 31i-A with Manual Guide i Max. turning diameter: 760 mm Max. swing diameter over bed: 1,000 mm Max. turning length: 1,540 mm Max. bar passage: 76 mm Travel: X1 axis: 630 mm Y1 axle: 230 mm Z1 axle: 1,585 mm B-axis: -120° + 120° X2 axis: 220 mm Z2 axis: 1,515 mm A-axis: 1,550 mm Spindle motor main spindle 22/26 kW Spindle nose A2-8 Max. spindle speed 4,000 rpm Spindle motor sub-spindle 22/26 kW Max. spindle speed 4,000 rpm Spindle nose A2-8 Spindle motor milling spindle 22/18.5 kW Capto C6 Max. spindle speed 12,000 rpm B-axis, 0.001° Tool magazine with 40 tool positions Lower turret, 12-speed BMT65P Max. speed driven tools: 4,000 rpm Cooling by the spindle, 1.5 kW, 2.0 MPA, 21.6 l/min Coolant pump for lower turret, 2.2 kW, 1.0 MPA, 30l/min Coolant for powered tools Co ...
Inv. Num. : 7585 Type: DNM 400 Producer: DOOSAN Created: 2010 Parameters: Control system: Fanuc Switch-on hours: 3042 h Work table length: 920 mm Work table width: 435 mm X-axis travel: 762 mm Y-axis travel: 435 mm Travel Z-axis: 510 mm
