used DOOSAN vc

DOOSAN LYNX 2100 LMA CNC turning center was manufactured in 2021 in South Korea. The machine offers best-in-class turning performance and precision, thanks to a wide design, a highly stable bed, a low-vibration spindle and a full guide guard that protects against coolant leaks and chips from entering into the machine. All this makes the DOOSAN LYNX 2100LMA CNC lathe ideal for any industrial facility where quality and precision are top priorities. The used spindle is driven by a reliable electric motor with high power, which is used for the versatile use of tools taken from the 12-position headstock. The turret, on the other hand, is controlled by a powerful servomotor which guarantees fast and accurate tool selection. All machining parameters are programmed in the intuitive DOOSAN FANUC i Series CNC control with many useful features, whose excellent optimisation allows maximising mach ...

DOOSAN LYNX 220 LSYC 5-AXIS CNC turning center was built in 2014 in South Korea. In order to meet all production requirements, the machine uses state-of-the-art components and technologies, which combined with an extremely stable design offer the best precision and turning performance in its class. In addition, the offered equipment allows even the most intensive machining process to be streamlined and fully automated in any production facility. Workpieces with a maximum length of 510 mm are machined inside a large working area with two high-speed spindles. During the machining process, the specially designed bed of the machine effectively dampens all vibrations and oscillations, resulting, e.g. in improved workpiece surface quality and increased tool life. The offer includes a wide range of equipment, such as the Y axis, bar feeder, measuring probe and the intuitive DOOSAN FANUC i ...

DOOSAN LYNX 220 LMSC CNC turning center was manufactured in 2015 in South Korea. This extremely efficient and reliable machine is able to streamline even the most demanding machining process in any production facility, thanks to the use of, among others, two high-speed spindles and an extremely stable design. Workpieces with a maximum diameter of 240 mm and a length of 510 mm are machined inside a large working area equipped with a specially designed bed. The bed effectively dampens all vibrations and oscillations, resulting in a better quality of the machined surface and increased service life of the cutting tools. To this date, the DOOSAN LYNX 220 dual-spindle CNC lathe has worked a total of 2198 hours and has been used exclusively for machining stainless steel. The total weight of the machine is 3400 kg. Technical data of the DOOSAN LYNX 220 LMSC CNC lathe General data - feeds in ...

Turning diameter: 500 mm Turning length: 450 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 i Tb Make Doosan S310NM Type S 310 NM Year 2007 / 3412 Hours ! Doosan s310 NM with Fanuc 21 iTB Centre height (mm) Swing = 500 Center distance (mm)DBC = 450 Spindle bore CNC Fanuc 21 iTB Live tooling ATC 12 positions Bar feeder LNS servo speed Chip conveyor + Tool eye Doosan S310 NM CNC Lathe  

New CoBot Brand: Doosan Robotics Type: H2017 The video shows a DOOSAN H2017 CoBot in cooperation with a CNC machining center VITAP K2 2.0 with automatic package. The Doosan Robotics H2017 Carries loads up to 20kg and works with a reach up to 1700mm. Including robot column, vacuum gripper, commissioning, pre-assembly, interface, training, safety technology and CE certification, the recommended retail price is approx. 65,000? net. The time required for teaching new parts is about one hour - always depending on the complexity of the work steps. The optimal area of application for this CoBot is recurring small batches and series that utilize the robot over several shifts. Have you become curious? Then please feel free to contact us about the topic!

Turning diameter: 900 mm Turning length: 1000 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: OT DOOSAN - PUMA 450 CNC Lathe Ø 900 x 1000 mm MACH - ID 6351 Make: DOOSAN Type: PUMA 450 Control: Fanuc OT YOP: 1997 Max. turning Ø    900 mm X-Axis    370 mm Z-Axis    1.075 mm Spindle bore       117 mm Speedrange         2000 Rpm Spindle power    37 kW ATC / revolver    12 Chip conveyor      yes Pinole taper          6 Mk Stroke pinole       150 mm Quill Ø     150 mm Dimensions Length      6.200 mm Width        2.460 mm Height       2.800 mm Weight      14.000 kg

Turning diameter: 630 mm Turning length: 0 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21i-TB MACH-id    4209 MAKE        DOOSAN TYPE          PUMA 280 M YEAR         2008 SPECIFICATIONS Swing over bed    630 Swing                  500 X Axis                  242 Z Axis                   680 Controll                  Fanuc 21i-TB Tool changer          12 Chip conveyor        Yes Swing over bed Ø      630 mm DIMENSIONS Length       4000 mm Width         2550 mm Height  ...

Turning diameter: 570 mm Turning length: 650 mm Turret positions: 0 CNC Brand: Fanuc CNC Model: 21 iTB MAKE   DOOSAN TYPE    PUMA 240 MB YEAR   2004 SPECIFICATIONS Swing over bed Ø  570 mm Control    FANUC 21 i TB Swing in the gap Ø  370 mm Distance between centres   650 mm Spindle bore   77 mm Spindle speeds / ranges  3500 Rpm Power   18.5 Kw DIMENSIONS Length   3430 mm Width    1800 mm Height    1800 mm Doosan PUMA 240 MB Ø 570 with Live tools, we have also some other cnc lathes for sale

Turning diameter: 550 mm Turning length: 513 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 i Tb Make Doosan PUMA Type 240 MB Year 2007 FANUC 21i TB Doosan Puma 240 MB Centre height (mm) Swing = 550 Center distance (mm) DBC = 513 Spindle bore Bore = 76 ATC 12 Position Speeds 4500 / 11 kW Live tooling 5.5 kW / 5000 Rpm* Bar feeder IEMCA 65 mm * Bar feeder interface * Chip conveyor * 7 Bar Coolant * Tool eye * Tool Gripper * Tool managment  

DOOSAN DNM 4500 CNC milling machine built in Germany in 2019 is used for drilling, milling or threading workpieces weighing up to 600 kg. Machining is performed in the X,Y,Z axes on a working table with dimensions (L x W) of 1000 x 450 mm. The vertical machining centre characterised by excellent precision and exceptional machining quality, will satisfy even the most demanding customers. Noise and vibrations occurring during machining are reduced thanks to the use of a high-performance direct drive spindle operating at speeds in the range from 80 to 8000 revolutions per minute. The tool magazine can store up to 30 tools, and they are changed in a very short time of just 1.2 seconds. The machining centre is also equipped with among others, through-spindle coolant, a lubrication system and an extremely efficient and reliable FANUC 0iMF CNC controller, ensuring full control of the mill ...

Key data: 480 , 600

Doosan gas generator in good condition. It has the following specifications: Manufacturer: Doosan Fuel: Gas Manufacture year: 2008 Kva: 600 Mass: 3740 Other specs: 10 cylinder, control panel, complete.

BRAND: DOOSAN YEAR: 2017 MODEL: DNM350/5AX PRODUCTION HOURS: 1685 APPLICATION TYPE: MILLING LOCATION: SOUTH KOREA MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: FANUC MODEL: SERIES 31I-MODEL B5 MAIN DRIVE SPINDLE SPEED RANGE: 20000 1/MIN MOVEMENT X-AXIS MOVEMENT: 400 MM Y-AXIS MOVEMENT: 655 MM Z-AXIS MOVEMENT: 500 MM MEDIA MAIN ELECTRONIC CONNECTION: 220V /50-60HZ Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - TS27R (RENISHAW) - TOOL SHANK: BT40 - INDEX DEGREE FOR TABLE:0. 001 DEGREE - SPINDLE AIR CURTAIN - THROUGH SPINDLE COOLANT 70 BAR - HELICAL INTERPOLATION, SPINDLE THERMAL COMPENSATION - STORED PITCH ERROR COMPENSA. - OPTIONAL CHAMFERING/CORNER ROUND - DSQ2 (AICC 200 BLOCKS & DATA SERVER 1GB) - DOOSAN TOOL MONITORING, AIR CONDITIONER, OIL COOLER, OIL S ...

Doosan gas generator in good condition. It has the following specifications: Manufacturer: Doosan Fuel: Gas Manufacture year: 2008 Kva: 600 Mass: 3740 Other specs: 10 cylinder, electric panel, complete.

Machine is in good working condition • Control unit: FANUC 18-T • Year : 1998 • Double Mirror: 8 and 6 inch available • C Axis: Available • Magazine: 12 sets • Machining Diameter Max. : Ø350x640mm • Spindle Diameter: Ø60mm • Conveyor: Available this extra information is standard for this model. Please always double-check the details during a visit The Doosan DOOTURN 310TML CNC lathe, manufactured in 1998, continues to stand as a reliable and efficient machine for precision turning operations. Equipped with a FANUC 18-T control unit, this lathe offers advanced control capabilities for precise and versatile machining tasks. Featuring a double mirror configuration with 8 and 6 inch options, the DOOTURN 310TML provides flexibility in accommodating a wide range of workpiece sizes and configurations. The availability of a C-axis further enhances its machining ...

KOMPRESOR DOOSAN 7/51 5,10m3 2014r !! Compresor DIESEL DOOSAN 7/51 maszyna po serwisie !! Dane techniczne: wydajność 5.10 m3/min; ciśnienie robocze 8,6 bar; ROK produkcji 2014; Silnik; YANMAR Przebieg 1019H Kompresor w pełni sprawny,gotowy do pracy,udzielamy gwarancji Cena net: 33500 zł Cena gross: 41205 zł Poniżej znajduje się link do wideo , pokazujący prace maszyny .

Doosan gas generator in good condition. It has the following specifications: Manufacturer: Doosan Fuel: Gas Manufacture year: 2008 Kva: 600 Mass: 3740 Other specs: 10 cylinder, electric panel, complete.

This Doosan DNM 6700 Vertical Machining center was manufactured in the year 2016 in South Korea. It is equipped with a Doosan Fanuc i-Series control unit and has 3 axis. The machine has a spindle speed of 12000 rpm.

The DOOSAN TT 1800 SY lathe, manufactured in 2006, features a FANUC Series 18i-TB control. It boasts robust features such as a sub-spindle, driven tools, dual C-axes, a Y-axis, and twin turrets. Additional amenities include a parts conveyor and a chip conveyor. Note, the automatic bar feeder requires some adjustments for optimal performance. Reach out for more information about this DOOSAN TT 1800 SY lathe.

Support / Pratzen/ Traverse N83ymlcr from a MobilExcavator Doosan with a total weight of approx. 16-19to. The attachment part is almost unused and was track suspension immediately after the new purchase of the excavator. It can be mounted in place of the clearing shield or on the opposite side. The exact year of construction and the type of excavator are not known.

Turning diameter: 320 mm Turning length: 350 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: Oi-Tc MACH-id     5463 MAKE         Doosan Korea TYPE           Lynx 220 YOP             2009 SPECIFICATIONS Max. turning Ø    320 mm X-Axis         175 mm Z-Axis          330 mm Spindle bore       51 mm Speedrange       4000 Rpm ATC / revolver        12 Control    FANUC Oi-TC Chip conveyor         yes Tool eye       yes Pinole taper        4 Mk Stroke pinole        80 mm Quill Ø       65 mm DIMENSIONS Length  &nbs ...

DOOSAN PU126TI 395 HP - 2100 RPM / 0 HOURS AFTER OVERHAUL / NEW PISTON RINGS / CONNECTING RODS / BEARINGS

Turning diameter: 510 mm Turning length: 650 mm Turret positions: 12 CNC Brand: Fanuc MACH-id     5372 MAKE          DOOSAN TYPE            LYNX 220 LM YOP              2008 SPECIFICATIONS Max. turning diameter Ø       510 mm DBC Turning length        650 mm X-Axis       175 mm Y-Axis       650 mm C-Axis        360000 ° Spindle bore      51 mm Speedrange        5000 Rpm ATC / revolver       12 Speed live tools      6000 Rpm Control            FANUC Chip conveyor        Yes Tool eye          Yes Pinole taper ...

BRAND: DOOSAN YEAR: 2017 MODEL: LYNX 220LSY APPLICATION TYPE: TURNING LOCATION: ITALY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: FANUC MAIN DRIVE SPINDLE SPEED RANGE: 4500 1/MIN NUMBER OF AXIS: 4 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAX DIAMETER 300MM - SUB SPINDLE: 6000 RPM - FULL CONTOUINGR C-AXIS - HEAVY DUTY 12 STATIONS TURRET THAT ACCEPT ROTATING TOOLS HOLDERS AND 24 POSITION INDEXING QUALITATIVE MACHINE BENEFITS: - MACHINE COMES WITH LEMCA BOSS 552 HEAVY DUTY - MILL-DRILL CAPABILITY AND Y-AXIS WITH FULL C-AXIS SUB SPINDLE, GREATLY REDUCE THE NEED FOR SECONDARY OPERATIONS, ELIMINATING ADDITIONAL SET-UP AND HANDLING COSTS. CLASSIC MANUFACTURING METHODS AND ULTRA RIGID CONSTRUCTION ARE COMBINED WITH ADVANCED TECHNOLOGICAL FEATURES TO PROVIDE EXCEPTIONAL VALUE. MAIN FEATURES - ...

BRAND: DOOSAN PUMA YEAR: 2018 MODEL: 5100LB APPLICATION TYPE: TURNING LOCATION: UNITED KINGDOM MACHINE TYPE: LATHE AVAILABILITY: 01 10 2023 Technical Information CONTROL UNIT BRAND: FANUC MODEL: SERIES OIT MAIN DRIVE SPINDLE SPEED RANGE: 1500 1/MIN NUMBER OF AXIS: 2 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - SWING OVER BED: 900 MM - SWING OVER SADDLE: 690 MM - MAX TURNING DIA: 650 MM - DISTANCE BETWEEN CENTRES: 204. 2 MM - SPINDLE BORE: 181 MM - BORE THROUGH DRAW TUBE: 166. 5MM - SPINDLE POWER: 37/45 KW - MACHINE WITH: 530MM 3 JAW HYDRAULIC CHUCK QUALITATIVE MACHINE BENEFITS: - OIL SKIMMER - SWARF CONVEYOR - FLOOD COOLANT THROUGH TURRET

We are looking for all models of Doosan, Daewoo, Hyundai and Hitachi wheeled excavators for export