We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Specifications: - Drilling capacity into solid steel ST 60 40 mm - Drilling capacity GG 25 50 mm - Tapping ST 60 M 33 - Tapping GG 25 M 45 - Drilling spindle holder MK - Spindle diameter 55 mm - Quill stroke 200 mm - 18 drilling spindle speeds 35 - 1800 rpm - Drilling feeds 0.075 - 0.60 mm/rev - Height adjustment of the drilling column 450 mm - Drilling radius min / max 305 / 1005 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1900 x H 2800 x D 2300 mm - Weight approx. 1800 kg -with: -Auto. Selection of speeds + feeds - Tapping device - hydr. Columns + Boom Clamping - Coolant device - T – Vertical grooves on the left side of the machine
used
- Boom travel max.: 900 mm - Quill stroke: (Z-axis) 140 mm - Column stroke max.: (W-axis) 400 mm - Distance spindle/table min/max: 180 / 720 mm - Swivel angle max: 325° - Drilling radius min/max: 420 / 1320 mm - Clamping surface: 1200 x 600 mm - Table height above floor: 905 mm - Spindle speed range: 60 - 3050 rpm - Spindle speeds: 18 pieces - Tool holder short spindle: MK 4 - Total power: 5 kW - Machine weight: 2110 kg - Space requirements (W x D x H): 1.3 x 2.3 x 2.1 m - Condition: very good Details High-speed radial drilling machine, drilling capacity into full st. 60 / E335 max. diameter 30 mm, drilling capacity into full GG 20EN-GJL 200 max. diameter 32 mm, tapping capacity St 60 M24, well-maintained condition, was not used much, well-maintained machine Accessories Documentation, various clamping devices, various drill chucks, machine feet
used
Key data: 40 mm, 1007 mm
Code 231027 Rewriting Controlled Fast Radials Make DONAU Type DR 40 Machine No. 1137 – 3 Built in 1988 Drilling into full stem 60 40 mm Drilling into full GG 22 50 mm Tapping capacity into the St. 60 M 33 Tapping capacity into the GG 22 M 45 Steep taper of the drilling spindle SK 40 Feed normal ( 5x ) 0.075 – 0.6 mm/rev Drilling spindle speeds 18 pcs. 35 – 1800 rpm Drilling spindle stroke 200 mm Drilling radius min/max 350 / 1300 mm Projection min/max 120 / 1007 mm Height adjustment of the drilling spindle head 450 mm Distance drilling spindle/table min/max 350 / 800 mm Table top 1225 x 750 mm Power 2 / 3 kW 380 Volt Weight 2000 kgs Dimensions LxWxH 2300 x 1225 x 2400 mm Accessories for tapping device Coolant system Condition machine is in good condition
used
Code 230302 Description of fast radials Brand DONAU Type DR – 13 G Machine r. 321 – 2 Year of construction 1966 Capacity in steel 60 13 mm Capacity in GG 16 mm Thread cutting capacity in steel M8 – M 10 Thread cutting capacity in cast iron M 10 – M 12 Spindle holder 2 MK Projection 820 mm Table 1000 x 700 mm Vertical movement of the boom 400 mm Spindle stroke 100 mm Spindle table min. – max. 180 – 580 mm Spindle speeds infinitely variable in 2 steps 200 – 1100 / 600 – 3400 rpm Power 0,37 / 0,44 kW – 380 Volt Dimensions Br. x D x H 1000 x 1300 x 1800 mm Weight 590 kgs Condition machine is in normal condition
used
Donau DR 23 /Quick Radial /Boom Drilling Machine Drilling capacity / steel approx. 23mm Projection approx. 700mm Table contact surface approx. 1200x600mm Spindle holder MK 3 Speed range approx. 70 - 1550 rpm Feed range approx. 0.075 - 0.3mm /automatic Drilling depth approx. 130mm Thread cutting device Q7tn9 Electromotive drill head adjustment Boom forward - backward movable & horizontally swivelling Hydraulic clamping Gearshift Lateral clamping option for workpieces Chuck Documentation Dimensions approx. LxWxH approx. 2x1.6x1.9 meters Weight approx. 2to
used
Code 220406 Description of fast radial MK-4 Brand DONAU Type DR – 32 Machine r. 686 – 3 Year of construction ± 19.. Capacity in steel 60 32 mm Capacity in GG 45 mm Tapping in steel 60 M 26 Thread cutting in GG M 36 Spindle holder 4 MK Projection 900 mm Table 1200 x 600 mm Vertical movement of the boom 400 mm Spindle stroke 190 mm Spindle table min. – max. 80 – 650 mm 18 spindle speeds 31 – 1370 rpm Spindle feeds 0.1 – 0.15 – 0.2 – 0.3 mm/rev Power 1.5 / 2.2 kW – 380 volts Accessories tapping device Dimensions Br. x D x H 1200 x 1600 x 1910 mm Weight 1700 kgs Condition machine is in normal condition
used
Rapid radial / Rapid radial / Snel radial DANUBE DR 13
used
Code 171314 Description Controlled rapide radialdrilling machine Make DONAU Model DANUMERIC 340 Serial No. 6110 – 3 Year 1995 Control Donau Drilling cap. in St. 60 in full 40 mm Drilling cap. in Castiron GG 22 in full 50 mm Thread cutting in St. 60 M 36 Thread cutting in Castiron GG 22 M 45 Spindle taper ISO 40 Spindle speeds stepless 15 - 2800 rpm Quill movement 200 mm Feeds stepless 5 - 2000 mm/min Min/max radius of spindle 540 / 1590 mm Working surface table 1800 x 600 mm Min/max height spindlenose / top of table 85 / 695 mm Motor 5,5 kW 400 V Dimension 1800 x 2500 x 2300 (2700) mm (L x W x H) Weight 2900 kg Accessoiries Position controlled in X – Y – Z and spindle Coolant Machine can also be used without control Condition Machine is in very good condition
used
Code 111258 Description Rapid Radial Drilling machine Make DONAU Model DR – 24 Serial No. 2300 – 3 Year 1984 Drilling cap. in St. 60 in full 28 mm Drilling cap. in Cast Iron 35 mm Tapping cap. in St. 60 M 20 Tapping cap. In Cast Iron M 30 Spindle taper 3 MK Spindle radius max / min. 1000 / 400 mm Min/max height spindle / top of table 80 / 650 mm Arm traverse 450 mm Spindle traverse 175 mm Number of speeds 18 steps Speed range 45 – 2240 rpm Number of feeds 4 Feed range 0,075 – 0,15 – 0,3 – 0,45 mm/rev. Working surface table 1200 x 500 mm Motor 1,1 / 1,6 kW – 380 Volts Dimension W x D x H 1200 x 1600 x 1910 mm Weight 1400 kg Accessoiries screw cutting Condition Machine is in normal condition
used
Code 81221 Description Position Controlled Fast Radial Drilling machine Make DONAU Model DR 32 NC Serial No. 7107 Year 1984 Control Heidenhain TNC 145 Drilling cap. in St. 60 in full 32 mm Drilling cap. in Castiron GG 22 in full 45 mm Thread cutting in St. 60 M 26 Thread cutting in Castiron GG 22 M 36 Table 1120 x 800 mm X – Axis 800 mm Y – Axis 630 mm Z – Axis ( Quill ) 170 mm Max. distance Column-Spindel 750 mm Vertical movement Spindelhead 400 mm Spindle taper MC 4 Spindle speeds 45 – 2240 rpm Quill movement 170 mm Rapide feed 8000 mm/min Feeds 4000 mm/min Motor 2,2 / 4,0 kW 380 Volts Dimension 5,0 x 4,0 x 2,7 meters (L x W x H) Weight 3000 kg Accessoiries Position controlled in X – Y – Z ( Quill ) Coolant Machine can also be used without control Condition Machine is in good ...
used
- Drilling capacity into full steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drilling spindle holder MK 3 - Spindle diameter 50 mm - Pinolene stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drill feeds 0.1 - 0.45 mm - min./ max. distance spindle - table 300 / 700 mm - Drilling radius min. / max. 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx.B 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. Columns + boom clamping - Coolant device
used
Preliminary information: stock no. 4657: 1 used Rapid radial drilling machine Make DONAU, mod. DR 28 Z with drilling head adjustment 600 mm work range: table 1200 x 500 mm
used
CONTROLS NC controls WORKING RANGE - BORING drilling capacity full bore (steel): 40 mm throat (max): 800 mm SPINDLE / HEAD spindle revolutions (min): 335 /min spindle revolutions (max): 1800 /min number of gears: 2 tool fixture: MK 4 TECHNICAL SPECIFICATION table surface (left-right): 1000 mm table surface (front-back): 500 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 2500 mm space requirements -front/back-: 1250 mm total height: 2500 mm - 9`600h operating hours - div. tool holders, - coolant system - with cube table
used
Rapid radial drilling machine, radial drilling machine, drilling machine, boom drilling machine -Clamping table: 500 x 1055 mm -Projection: 1120 mm -Cone mount: MK4 -Motor power: 1.5/2.2 kW -Speeds: 45-2240 rpm, electrically switchable in steps -Columns: Ø 150 mm -Spindle stroke: 160 mm -Tapping device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 2000/1200/H2320 mm -Weight: 1800kg
used
Rapid radial drilling machine, radial drilling machine, drilling machine, boom drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Cone mount: MK4 -Motor power: 1.35/1.8 kW -Speeds: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg
used
x-travel: 1500 mm y-travel: 1000 mm z-travel: 700 mm number of tools: 8 spindle turning speed range: 4200 U/min table-size: 1500 x 1000 mm capacity: 20 kVA rapid traverse longitudinal and cross: 30 m/min rapid traverse Z-axis: 20 m/min tool taper: SK 40 Boring power: 40 mm thread - module: 24 mm Control: MITSUBISHI MMI table height: 780 mm max. dist. between floorpl. and spindle-nose: 670 - 1320 mm max. distance between table and spindle-nose: 180 - 830 mm total power requirement: 11 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 3,9 x 2,2 x 3,27 m Chip Conveyor: : Coolant System: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Rapid radial drilling machine make DONAU type DR 13 GMasch. -No: 332-1 built in 1967Technical specifications:Drilling capacity ST 60 / GG 213 / 16 mmThread St 60 / GG 2 M 10 / M 12Throat: 800 mmTable size: 630 x 915 mmSpindle stroke: 100 mmSpindle size: MK 2Stepless speeds: 200 - 3400 rpm.Weight approx: 800 kgWith- threading device- machine lightused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Drilling capacity: 40 mm Radius: 800 mm Spindle taper: 36 SPECIFICATIES Uitlading / arm lengte 800 mm Boor capaciteit 40 mm Boor capaciteit staal Ø 40 mm Boor capaciteit gietijzer Ø 50 mm Tap capaciteit M M 36 Spindel pinole opname Mk Sk 40 Spindel diameter Ø 195 mm Spindel pinole slag 200 mm Max. afstand spil - tafel 695 mm Tafel / voet afmeting lengte x breedte 1200 x 750 mm Vermogen kW 5.5 kW Toeren - Snelheden - Stappen 2800 Rpm
used
hobbing length: 2100 mm milling width: 300 mm max. module: 16/18 min. module: total power requirement: 10 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.