do all used for sale

Double glass frame steel orange, approx. 150x200h cm, without contents

Flat dowel cutter / groove cutter BOSCH GUF 4-22 A, 620 W

Office double workstation light grey, 2 angle desks each approx. 250x160 cm, 2 filing cabinets each approx. 80x205h cm, hanging file cabinet, sideboard, 1 swivel chair

Low Usage 2018 SAGAFLUID Automated Robotic Sampling & Dosing System Overview High-precision industrial installation designed for the automated preparation and dosing of chemical samples. Built in 2018 by SAGAFLUID for a Tier 1 energy company (REPSOL), this system combines gravimetric dosing, controlled heating, and collaborative robotics. Condition & Usage The equipment is in excellent condition with very low operational hours: approximately 350 hours of use between 2019 and 2020. It has been maintained under industrial standards and includes full technical documentation. Key Technical Features Advanced Dosing System: Equipped with 28 dosing pumps for raw materials (MM.PP.) and a high-precision gravimetric scale. Includes an automatic anti-drip system and programmable recipe selection. Robotic Integration: 1 Collaborative robot for container handling. 1 Robot equ ...

Grinding wheel diameter max. 300 mm Speed 1390 rpm Connection voltage 400 V Motor power 2.2 KW Condition: unchecked Auction-ID: A7-45761-739

Dough dividing machine Kemper Consul ET dough weigher - Manufacturer: Emil Kemper GmbH - Type: Consul - ET - Year of construction 2003 - With manual control

Dough section and crier WP Multimatik MUS - Manufacturer: Werner & Pfleiderer Lebensmitteltechnik - Type: MUS - 4-row - Year of construction: 2005

OMGA TR2A double miter saw: – useful opening 2800mm – adjustable blades D=300mm – total power kw 3.2, volt 380 Machine not CE compliant, for export

Key data: 300 t, 2 mm, 600 mm

Pressure: 300 tons Distance between the uprights 1800mm Side passages: Yes Installation height: 1000mm Table: 1800x1000mm Plunger: 1800x1000mm Stroke: 600mm Weight: 43 tons Height: 4700mm Siemes S7 Controller Ground-level installation Sick Light Barrier Cushion: Stroke 200mm

Sliding door wall cabinet approx. 100 cm, intermediate shelf

Sliding door wall cabinet approx. 160 cm, intermediate shelf

Gastromöbel STEIN Commercial kitchens Stainless steel sliding door cabinet approx. 160 cm w. worktop approx. 200 cm, including frame for shelves GN 1/1 deep, pot sink, double sink approx. 160 cm, intermediate frame, U-shape, coffee machine BRAVILOR Bonamat Mondo 2

Macchina composta da: Dosatore GRAVIMETRICO/VOLUMETRICO Minimix MCBAL + Aspiratore Monofase FG 204.1.

A dough sheeting machine Fritsch for folded dough sheets for subsequent processing is available. Belt width: 700mm, working width: 650mm, roller gap range: 0.3mm-50mm, roller diameter: 98mm, max. dough block weight: approx. 20kg, belt speed: 50m/min, machine dimensions X/Y/Z: approx. 3300mm/1250mm/1550mm, weight: approx. 500kg. An on-site inspection is possible.

Monta coclea G1S Produzione: 0,15 - 2,5 Kg/h

dosatore gravimetrico a 2 stazioni a serranda e 2 stazioni a coclea con sensore livello tramoggia su scarico produzione oraria : 80Kg/h portata coclee : 24 Kg/h capacità camera mescolazione : 7 dm3

CILINDRO TRAMOGGIA PESATURA NUOVO.

- Produzione: 0,5 - 7,2 Kg/h - Caricatore / Aspiratore Piovan S 31 - Potenza assorbita: 0.23 kW

dosatore gravimetrico a 2 stazioni a serranda con serranda scarico mixer e sensore livello tramoggia produzione oraria : 80Kg/h capacità camera mescolazione : 7 dm3 cilindro nuovo serranda scarico mixer

- Produzione: 1 - 15 Kg/h

dosatore gravimetrico a 2 stazioni a serranda con serranda scarico mixer e sensore livello tramoggia produzione oraria : 80Kg/h capacità camera mescolazione : 7 dm3

- Produzione: 1 - 15 kg/h

dosatore gravimetrico a 2 stazioni a serranda con serranda scarico mixer e sensore livello tramoggia produzione oraria : 80Kg/h capacità camera mescolazione : 7 dm3

Macchina composta da: Dosatore Gravimetrico/Volumetrico Minimix MCBAL + Aspiratore monofase FG 204.1.

dosatore gravimetrico a 2 stazioni a serranda con serranda scarico mixer e sensore livello tramoggia produzione oraria : 80Kg/h capacità camera mescolazione : 7 dm3

Macchina composta da: 2 Dosatori Gravimetrici/Volumetrici con cella di carico in tramoggia di dosatura + 1 Pannello di programmazione.

Macchina composta da: Dosatore GRAVIMETRICO/VOLUMETRICO Minimix MCBAL + Aspiratore Monofase FG 204.1.

dosatore gravimetrico a 3 stazioni a serranda produzione oraria : 30Kg/h capacità camera mescolazione : 2,5 dm3 boccole di scarico : 30mm staz. 1 e 2 - 15 mm staz. 3

monta coclea G1S produzione oraria 0,15 - 2,5 Kg/h

dosatore gravimetrico a 2 stazioni a serranda con serranda scarico mixer e sensore livello tramoggia produzione oraria : 80Kg/h capacità camera mescolazione : 7 dm3

dosatore gravimetrico a 2 stazioni a serranda con serranda scarico mixer e sensore livello tramoggia produzione oraria : 80Kg/h capacità camera mescolazione : 7 dm3

Monta coclea G1S Produzione: 0,15 - 2,5 Kg/h

Macchina composta da: Dosatore GRAVIMETRICO/VOLUMETRICO Minimix MCBAL + Aspiratore Monofase FG 204.1.

- Produzione: 1 - 15 kg/h

- Produzione: 1 - 15 kg/h

- Produzione: 30 kg/h Modello con cella di carico sul mixer.

dosatore gravimetrico a 2 stazioni a serranda con serranda scarico mixer e sensore livello tramoggia produzione oraria : 80Kg/h capacità camera mescolazione : 7 dm3

dosatore gravimetrico a 2 stazioni a serranda con serranda scarico mixer e sensore livello tramoggia produzione oraria : 80Kg/h capacità camera mescolazione : 7 dm3

monta coclea G1S pruduzione : 0,15 - 2,5 Kg/h

Belshaw HI18F Icer 2021, Stainless, This icing machine quickly applies icing to an entire tray or pan of donuts, can ice up to 24 donuts in one swift action, tray size up to electronic temperature controller, up to 1500 donuts per hour, mobile, 1Ph, two in stock

Belshaw HI18F Icer unused, 2023, Stainless, This icing machine quickly applies icing to an entire tray or pan of donuts, can ice up to 24 donuts in one swift action, tray size up to electronic temperature controller, up to 1500 donuts per hour, mobile, 1Ph

horizontal boring - glue injection - dowel inserting Single drill and inserter which can be freely programmed Drilling depth manually adjustable Z-axis with manual setting Workpiece sizes: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/max: 10 / 60 mm max. workpiecewidth with middle fence on 2 fields: 600 mm, on 1 field: 1200 mm Middle fence with pneumatic rise/fall 6 vertical pressure units Double membrane glue pump 1:1 Glue viscosity 350 mPas Dowels: 8 mm x 30 mm, 8 mm x 35 mm Controlls: Powercontrol PC85 with Woodwop software

Process: horizontal drilling - injecting glue - driving dowels 1 drilling and doweling unit, freely programmable Workpiece dimensions: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/ max: 10 / 60 mm Z-axis manually adjustable Drilling depth manually adjustable Center stop pneumatically lowerable 4 vertical pushers Double diaphragm pump 1:1 Dowels: 8 mm x 30 mm, 8 mm x 35 mm Control: Powercontrol PC85T with Woodwop software

machine 1: Fixed side at the left, working width 220 mm to 2500 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 10 - 40 m/min Chain infeed taking 1,62 m. panels in front of the dogs Panel alignment at the infeed Middle support NC 30 controlls Equipment left and right: 1+1 Jump universal shaper 6 kW 1+1 Twin hogging unit, motors 6,6 kW (2 motors) 1+1 Universal shaper 6 kW 1+1 Jump universal shaper 6 kW panel turning device HOMAG TD 31/30/13 Year 1989 machine 2: Fixed side at the left, working width 220 mm to 3000 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 8 - 40 m/min Chain infeed taking ...

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...

Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC

Working width 180 - 3200 mm, electronic setting Sieb & Meyer Fixed side at the left Chain transport, 80 mm wide Infeed for panels of about 1 m. Top pressure by driven belts Max. workpiece thickness: 80 mm Feedspeed 7 - 35 m/min, motor 2,2 kW Pop-up dogs every 1m10 Equipment left / right: 1 st post Front: 1+1 Jump scorer, motor 1,5 kW, 100 Hz, joined to 1+1 Hogger, motor 3 / 4,4 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz 2nd post Front: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz Rear: 1+1 Fixed milling, tilting, motor 2,2/3,3 kW, 50/100 Hz 3th post Front: 1+0 Jump milling, tilting, motor 2,2/3,3 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz All units with horizontal/vertical adjustment and Siko read-out Outfeed chain approx. 80 cm length Sound and safety enclosures

Machine designed for machining solid wood doors with frame and raised panels Workpiece dimensions Length 150 - 3000 mm Width 40 - 300 mm Thickness 20 - 60 mm Material: hard woods/soft woods Machine equiped with 2 working areas, including - 3 NC-axes X, Y, Z - telephone modem - 1 sawing unit - 1 horizontal boring unit - distance horizontal drill above table (Z):max. 40 mm - fixed workpiece table - central lubrication - CE package - max. workpiece length 2.400 mm KOCH Numeric with 3 NC-axes Positioning control with PC Pentium CPU Operating system Windows XP Professional: english 15? Touchpanel VGA + Touchscreen by means of LVDS connection USB-connection on PC and on Touchpanel Seriel and parallel interface on the PC Hard disk 2,5? Input of machine commands and motor control through the Touchpanel PS2 connection for external keyboard Office PC software Stretched machine bas for max. workp ...

Code: 0359 Brand: MASTERWOOD Model: TEKNOMAT 2000-P - CE Standard Electronic anuba inserting machine with 2 controlled axis for inserting anuba hinges – CE Standard Technical specifications: Working stroke length 3100 mm – Displacement speed 72 mt/min Working stroke height 350 mm – Displacement speed 15 mt/min Working stroke depth 150 mm - Displacement speed 15 mt/min Working table mm 150 x 3800 N° 2 rear stops with manual positioning N° 4 rear bracket-type clamps with reference stops Side stops with manual positioning 1 right - 1 left 2 pneumatic front clamps Anuba unit with double magazine for male female anuba hinges - Diameter 14 mm Tilting head - 7 + 90° Double stem anuba screw device Front fences on machine table for machining of assembled doors and windows Control CNC 2: Microprocessor control unit – Digital display – Multitasking operating syst ...

Double bench grinder REMA DS04/150 built in 2013, S/N 131024008, 160x25x51 mm, 400 V