do all used for sale

Height=1.6 m, Overall length= 1.6 m, Overall width= 1 m, Used, working conditions. Dough sheeting machine-

For sale Mori Seiki CNC lathe type DL-15 in good condition. Equipped with 2 x 12 positions turret and left and right spindle. Maximum speed 6,000 rpm of both spindles. Fanuc MSC-516 control. Chip conveyors and bar feeders. Still in good condition and still under power, subject to prior sale

Height=1.6 m, Overall length= 1.6 m, Overall width= 1 m, Suitable for soft dough. Working, good conditions.

GENERAL Project No.: 905789 Quantity: 1 pcs. Manufacturer: BUDERUS Type: BDG 220 Control: Siemens 840 D solutionline Year of Make: 2020 Condition: Used machine Spindle Approx (hrs): 3000 Shifts machine one approx. (hour): rarely used DESCRIPTION GRINDING Max. workpiece diameter 440 mm Max. workpiece height 150 mm Travel in X 170 mm Max. rapid traverse speed in X/Z 30 m/min Max. feed speed in X 0.01-15 mm/min Max. speed workpiece spindle 1000 1/min OTHER EQUIPMENT Workpiece probes for measuring thickness deviation Gate sensor Splash protection cladding with fully encapsulated working area Automatic work room door Lighting in the work area Mechanical oil/emulsion mist extraction system Coolant device with paper belt filter High pressure pump 25 bar Mobile control unit for set-up operation with electronic handwheel Machine condition light Au ...

Height=6 m, Overall length= 21 m, Overall width= 3 m, Producer: Hydrovoima piece Weight: 400-1500 gr the water content: 70-80% condition: Renovated In store Made in Finland Description rates of up to 1,800 pieces / hour or 1,500 kg / hour

Height=6 m, Overall length= 21 m, Overall width= 3 m, Producer: Hydrovoima Made in Finland Description Hydrovoima rye bread double divider used good working condition Sale on behalf of customer

Height=6 m, Overall length= 21 m, Overall width= 3 m, Producer: Ipeka Made in Finland Description Ipeka 2R industrial slicer 13 mm thickness oiling system stainless body good working condition Sale on behalf of customer

Height=19 m, Overall length= 90 m, Overall width= 125 m, Description Glimek Bowl lifter for mixer Glimek SP-240

Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Net weight= 820 kg, Producer: Werner & Pfleiderer condition: Refurbished Made in Germany Description Dough divider Parta U2 is designed for processing wheat flour and kneading up to 50% of the mass of rye flour method of careful processing of the dough two dividing chamber low oil consumption weight range 150-900 g or 80-750 g hopper volume 120 l dimensions with hopper 1127x750x1612 mm power 1.1 kW renovated

Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Description Belt rounder for rye bread Used in good working condition

Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Description Belt moulder for rye bread used good working condition

Height=1.6 m, Overall length= 0.66 m, Overall width= 0.7 m, Producer: Erika power: 380 V/ 50Hz Made in USA Description Semi automatic rounder Erika divides and rounds divide-rounded to 30 pcs 3 moulding plate

Height=1.6 m, Overall length= 0.66 m, Overall width= 0.7 m, Producer: Vitella, Italy piece weight range: min 40 g max 2000 g Description Vitella divider automatic / s emi automatic m anual dividers divides the dough into 10 to 0 parts dimensions 660 x 700 x 1100/1600mm power 400 V/50 Hz/3 knife cleaning button 9 different programs

Height=1.6 m, Overall length= 0.66 m, Overall width= 0.7 m, Producer: Kemper power: 2.6 / 3.2 kW / 380V condition: Renovated In stock Made in Germany Description The mobile spiral mixer optimal mixing results even with very small quantities max. 80 kg dough / 50 kg. flour bowl spiral and guard from stainless steel two speeds wheat mixed wheat mixed rye rye doughs

Brand Cincinnati Milacron Austria GmbH Type CMT 35 Machine number 2005723/10 Type Screw Conical Double Screw Year of manufacturing 1993 Ble Ud Dvyovl Hzgocop Machine hours 104.599 hours Screw Diameter 35 mm Dimensions (LxWxH) 3200 x 1500 x 1720 mm Weight (approx) 2000 kG

Merk: Leistritz AG Model: Micro 27/40 D Type schroef: Dubbele schroef Bouwjaar: 1993 Schroef Ø: 27 mm L/D-verhouding: 40 Werkuren: 2.466 Bws Ud Dvyju Aqdkocjw

Deze extruder van Cincinnati staat bij Plastima Used Machinery in de machineopslag. De machine komt uit 1999. Bj Usq Tr T Rod Dvycjlp – Merk: Cincinnati – Model: Titan 45R-APC – Bouwjaar: 1998 – Conische dubbele schroef extruder – Schroef Ø: 45 mm – Werkuren: 64.082

• One pair of original WEBER screws (excellent state, including measurement report • One pair of non-original screws Be Udowaxuae Dvycsww • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS-control • Output on PVC around 700 kg/hour

Doppelkopf W. Müller 1 channel Material: PVC Good condition

Hydraulic cylinder, double-acting, 210bar, stroke 1500mm, D80mm, NS41191534.., Parker, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Parker double-acting hydraulic cylinder, Type: NS41191534/DDHMDRN24M-C1100, Overall dimensions: 1740x130x200mm, approx. 100kg, Stroke 1500mm, Piston D 80mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential d ...

Siemens Dome Transformer 25 MVA 10.5KV/20KV immediately available and ready for use For more information, see nameplate Best regards, Markus Schmidt M&S Export

2 metal doors in mint condition, complete with frame 60 cm wide, 2 m high, had not yet been installed

Inv. Num. : 8811 Type: DG 104 Producer: ELUMATEC Created: 1990 Parameters: Control unit: E 200

Universal CNC lathe INDEX G 400 RATIO Line Hersteller [manufacturer]: INDEX Type [ type]: G 400 Control unit: Siemens C200-4D incl. milling of cylindrical tracks Incl. handwheel Baujahr[construction year]: 10/2004 Turning length 1250 Main spindle D102 with swing-in gear 1700 Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE TOOL CARRIER 1 COMPL. AXES X,Y,Z,B with turning/milling operation Disc turret VDI40 10 stations MILLING SPINDLE HSK A63 Tool carrier axles 2 XZ Disc turret VDI40 10 stations SUB-SPINDLE D102 DIRECT DRIVE 1300Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE DISC MAGAZINE ON THE LEFT OF THE HSK63 SINGLE-SWING GEARBOX WITH 32 TOOL HOLDERS DISC MAGAZINE RIGHT COMPL. M.32 TOOL HOLDERS HSK 63A Travel path: X= 320mm Z=1250mm Displacement measuring system X-axis glass mast. (abs) Fe ...

SPECIFICATIONS: Chain operation Vertical Machining Voltage: 380 V

Code: 0246 Brand: OMGA Model: TR 2B NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600

Used Roll Press FORTUNA, Machine Size 4 -In Bakery Condition- - 30 hollows per plate - Weight range: 40 - 110g - Condition: very good, - Video on request A viewing is of course possible by arrangement.

E+K Bunker Dosing and Storage Bunker Vibration Bunker Dosing and storage bunker: Dimensions: LxWxH = 760 x 400 x 125 mm Automatic controller: Type: PiCo A1-3/B.7 230 V Hz 50/60 Hz Drive: LSF 90 Linear Vibratory Actuator Length: 669mm Internal dimensions in kg max 7.00 kg min 3.00 kg Connection to control unit only 230 Volt Hz 50 A: 1.00 Total dimensions LxWxH = 1020 x 400 x 360 mm More items - new and used - can be found in our shop! International shipping costs on request!

Code: 0252 Brand: MA BREVETTI Model: JUNIOR 275 Pneumatic double mitre saw for 45° + 45° cuts at both ends, in frames and mouldings of any shape and kind Technical data: Blade diameter mm 275 F30 Max cutting capacity: Width 70 mm - Height 90 mm Production rate approx. 700/800 cuts Motors n° 2 - 2 Hp each - rpm 2800 Power supply V.380/50 Operating pressure 6 bar Suction port diameter 100 mm Overall dimensions mm 850 x 700 x 1400 mm Weight kg 265

Precision dowel boring machine. Pneumatic clamping, 2 drilling units, swivelling (0-90 degrees). Working width approx. 1200mm. Inspection possible by appointment.

The AutoDoor ADxxxC is a customer-specific version with cylinder function. The stroke is precisely adapted to the machine model. This model is particularly suitable for special applications where a classic electric hoist drive is not sufficient. Standard features: - Available in 3 different lengths as standard. - Standard brackets for quick and easy installation. - Available with machine-adapted brackets for different machines. - Standard for 180 kg door weight, stronger options available. - Single or double door function. - Can handle different stroke lengths in double-door operation (option). - Fits all CNC machines on the market. - No light barriers or terminal strips are required; the safety function is integrated into the product as standard. - Full safety classification according to EN ISO 13849-1 performance level PL d. - Connections are available on both sides and  ...

A double mitre saw Emmegi (Pressta Eisele) is available. Saw blade diameter: 500mm, saw heads: 2, saw head swivelling range: 90°-45°, cutting length range: 250mm-5000mm, max. cutting height: 350mm, max. cutting width: 160mm. Machine dimensions X/Y/Z: approx. 5750mm/1250mm/1700mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible.

Dimensions (L/W/H): 1300x1100x1350 mm Weight: 500 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1050x1050x110 mm Weight: 350 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2800x1100x2200 mm Weight: 1100 kg Total power requirement: 8,8 kw Horizontal and vertical drilling machine MULTI MZ3x8 - Max. Center Distance Between Holes 2440(L)mm x 300(W) mm- Min. Center Distance Between Holes 220(L)mm x 32(W) mm - Max.process length 2440 mm - Min.process length 220 mm - Plate thickness 12~40 mm - Total number of drilling bit 32pcs - Horizontal backside drilling rows 4 rows - Max. drilling dia. 35 mm(Single bit) and 13 mm (Multi)- Max. drilling depth 50 mm - Dia. of drilling bit shaft 10 mm - Length of drilling bit 57 mm/70 mm - Drilling bit speed 2840 rpm - Qty of horizontal L&R drilling rows 2 rows - Qty of vertical up drilling rows 2 rows - Air pressure 0.5~0.6 Mpa - Total power 8.8 kw - Net weight 1100 kg - Overall dimension 2800 x 1100 x 2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5350x4380x1820 mm Weight: 6800 kg Total power requirement: 41 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1200x930x1080 mm Weight: 390 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1780x850x1250 mm Weight: 1000 kg Total power requirement: 12 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4850x4650x1820 mm Weight: 6500 kg Total power requirement: 47 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4850x4380x1820 mm Weight: 5800 kg Total power requirement: 41 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1300x800x1350 mm Weight: 370 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1320x1220x1400 mm Weight: 275 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5350x4650x1820 mm Weight: 7500 kg Total power requirement: 47 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 560x500x580 mm Weight: 80 kg Total power requirement: 0,75 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 630mm, table length: 1600mm, max. dough belt thickness: 30mm, machine dimensions X/Y/Z: approx. 2250mm/1200mm/1200mm, weight: approx. 250kg. On-site inspection is possible.

Dough dividing and warping machine W&P Multimatic 4-row head machine defective Head machine from Werner & Pfleiderer Multimatic 4-row used immediately available in stock for sale. W&P Roll Line / Head Machine Type: Multimatic 4-row - Standing machine - 4 rows - Machine is defective

A used dough weigher W&P Parta U2001 stainless steel is currently for sale and immediately available in our warehouse in Bielefeld. Dough divider WP PartaU 2001 - with 1 chamber - Stainless steel clad - Weight range: 300 grams to 2800 grams - Hourly output macx. 1140 Pieces - the dough divider is in baker's condition - Year of construction 2007

Brand: Cincinnati Milacron Austria GmbH Type: PHPO 40 Year of manufacturing: 1999 Weight: 6.200 kg

For sale Emco CNC double spindle lathe type Hyperturn 45. A very complete CNC lathe with left and right spindle, as well as an upper and lower turret. Both turrets have driven tool positions! The upper turret also has a Y-axis with 70 mm travel. Tool holder attachment VDI25, rod capacity left spindle is Ø 45 mm, maximum speed 7,000 rpm. Maximum diameter is Ø 300 mm. Maximum part diameter is 480 mm. The distance between the two spindles is 720 mm. Fanuc 18i-TB control. The machine is equipped with high pressure pump, chip conveyor with right ejection, parts catcher, manual collet devices, etc. Available from stock, subject to prior sale. The machine has a light layer of soot. This can be easily removed.

Dough divider for rustic rolls and ciabatta incl. sowing KEMPER, type: Quadro Fit -In bakery condition- - Head machine / dough divider KEMPER Quadro Fit - Including various cutting rollers - Adjustable speed mesh band - Sowing station with moistening and seed pad - Adjustable speed turntable - Plate included - Condition: good - Ready to use Visits and test runs are possible by arrangement.