We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,378 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
PUMA TT1800SY Upper Driven Head with Y Axis, Lower Driven Head, Dual Spindles. FANUC 31i-B control system. Max. circulating diameter above the bed 300mm. Max. circulating diameter above support 230mm. Max. turning diameter above bed with upper head 230mm. Max. turning diameter above bed with lower head 230mm. Max. turning length 600mm. Max. distance between the face of the right and the face of the left spindle 980mm. Milling range outside the turning axis using the Y axis mm 100 (+/- 50). Max. diameter of turned bar (left spindle) 65mm. Max. diameter of turned bar (right spindle) 65mm. Max. permissible weight of the workpiece without the use of a counterspindle (including the weight of the chuck = 23 kg) 12 kg. Total weight 7800kg. Accessories: Feeder SS 2500, length 200-1525mm. Standard accessories. The machine is in good technical condition, it is necessary to seal the upper machining ...
used
We hereby offer this used Doosan Puma GT2100 CNC lathe from 2021, located in Slovakia. With a generous 562 mm turning length, Fanuc i control unit, 4500 RPM spindle speed, and a robust 18.5 kW motor, this machine offers precision and power for your turning needs. Technical specifications: Year: 2021 Made in: South Korea Working hours: 630 hours Control unit: Fanuc i X-Axis travel: 230 mm Z-Axis travel: 580 mm Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 30 m/min Max turning diameter: 390 mm Max turning length: 562 mm Through hole diameter: 66 mm Chuck size: 203 mm Spindle speed: 4500 rpm Motor power: 18.5 kW Turret stations: 12 slots Dimensions: Length: 2940 mm Width: 1628 mm Height: 1700 mm Weight: 3700 kg
used
The machine is in good technical condition, it is possible to test it by agreement. Control system: DOOSAN FANUC-i Total hours: 8205 hours Maximum turning length: 510 mm Max. turning diameter: 300 mm Turning diameter above the bed (max): 600 mm Turning diameter over the transverse slide (max): 400 mm Controlled axes: X/Z/Y/C1/C2/B Maximum travel length in the X axis: 205 mm Maximum feed rate in Z axis: 560 mm Y axis: 105 mm C1/C2 axis: 360 Maximum power of main spindle: 15 kW Spindle drilling diameter: 76 mm Minimum speed of main spindle: 45 1/min Maximum speed of spindle: 4500 1/min Weight workpiece: 300 kg Maximum travel length in B axis: 560 mm Max. bar material passage: 65 mm Length: 2880 mm Width: 1710 mm Height: 1920 mm Weight: 4200 kg Equipment: Bar feeder SS 2500 Chip conveyor
used
The machine is in good technical condition. X/Z axis travel: 205/340mm X/Z axis rapid traverse: 30/36m/min Fanuc i-Series control system Spindle speed 6000rpm Clamping ASA A2-5 Max. circulating diameter above support 400 mm Max. turning diameter above the bed 350 mm Max. turning length with chuck 330 mm Max. diameter of the turned bar 42 mm Automatic tool head bidirectional with hydraulic blocking Number of places in the tool head 12 pcs Indexing time 0.11/0.6 s Chuck SMW-Autoblok, type KNCS-N 170-43-3-A05-GKB+WAK + set used soft jaws. The hydraulic cylinder of the machine was replaced on February 8, 2022. The machine is in operation and can be inspected by prior arrangement.
used
- Control FANUC 31i - model B - Machine hours Control on: 26,400 h Spindle: 4,896 h - 12-speed revolver - 8-speed turret - No driven tools - max rotational diameter 255 mm - max. rod diameter 76 mm -Tailstock - Bar Feeder Interface - Scraper tape conveyor LNS -Auto. Tool Setter - Coolant pump 10 bar, 30 l/min Machine weight 7,000 kg
used
Machine in good technical condition, possibility of testing after agreement. Circulating diameter above the bed max. 780 mm Circulating diameter above support max. mm 630 Max. turning diameter above the bed mm 406 Max. turning length in the chuck mm 760 Max. diameter of the turned bar (on the main spindle) mm 65 Stroke in the X axis mm 260 Stroke in the Z axis mm 830 Stroke in Y axis mm 102 (+/-51) Stroke in the B axis mm 830 Stroke in the C1 axis (rotation of the main spindle) - ± 360° Stroke in the C2 axis (rotation of the secondary spindle) - ± 360° ØS Fanuc, weight 6,000 kg.
used
Inv. Num. : 7399 Type: PUMA 3100 Producer: DOOSAN Created: 2015 Parameters: Control system: FANUC Max. turning length: 760 mm Max. turning diameter: 525 mm Maximum travel length in the X-axis: 293 mm Maximum feed rate in the Z-axis: 830 mm Spindle speeds: 2800 1/min Maximum main spindle power: 22 kW Number of tools: 10 pieces Length: 4095 mm Width: 1978 mm Height: 2010 mm Weight: 5850 kg Equipment: Conveyor Programmable tailstock/quill 3-jaw chuck 2022/8: Replacement of bearings in the spindle
used
faceplate diameter: 2500 mm swing diameter: 2900 mm turning height: 1650 mm slides vertical travel: 850 mm side head - cross travel: 900 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
General SKU391U1096 LocationBarneveld MakeDosimex TypeGN05 Main Features MaterialStainless steel Motor0.25 KW Specified Features - Metering screw MaterialStainless steel 1.4301 (304) Metering screws Metering screwcheck Screw diameter53 mm Pitch30 mm Shaft diameter11 mm Screw length40 cm With hoppercheck Capacity15 Ltr. Hopper sizes200 x 250 x 400 mm Inlet200 x 250 mm OutletDia 55 mm With motor0,25 kW Screw speed300 rpm With breaking/mixing shaft100 rpm Without motorcheck Information Year of constructionunknown ( type plate missing) Floorspace0,8 x 0,4 m Total height0,6 m Weight75 kgMetering screwsDosimexDosing units > Metering screwsBrand > Dosimex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, T ...
used
Year of construction: October 2023 Printing width: 782 mm incl. Editor Super Tracker Controller, UV curing system, cooling system and roller section for integration into a Bobst die-cutting machine with few operating hours
used
Shredder for green waste, biomass, roots, bulky waste, waste wood, commercial waste, etc., equipment: radio remote control, hydraulic travel drive, overbelt magnet, auxiliary hydraulics, humidification for dust binding for external water connection, service and tools new. SPECIAL FEATURE: Engine original MTU- Mercedes NEW due to dust damage.
used
KOMPRESOR DOOSAN 7/51 5,10m3 2014r Compresor DIESEL DOOSAN 7/51 maszyna po serwisie Dane techniczne: wydajność 5.10 m3/min; ciśnienie robocze 8,6 bar; ROK produkcji 2014; Silnik; YANMAR Przebieg 1019H Kompresor w pełni sprawny,gotowy do pracy,udzielamy gwarancji Cena net: 33500 zł Cena gross: 41205 zł Poniżej znajduje się link do wideo , pokazujący prace maszyny .
used
Hello from Moers, We offer the modular solution for high-resolution prints from our packaging hall. The device is dismantled and is offered with a conveyor belt (see pictures) The conveyor belt is aluminum-based with an electric motor! Both articles can be viewed in Moers!
used
Description: SPECIFICATIONS Character: Doall Type: C-996A Fully automatic: yes Capacity rectangular 90º: 250 x 440 mm Saw blade size: 4,014 mm weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 1,500 x 1,400 mm
used
Coding and marking of PET, glass, plastic, foil, coated metal, cardboard, paper, polypropylene Labeling field 58 x 58 mm up to 452 x 572 mm Labeling of up to 60 codes, e.g. alphanumeric / data matrix / QR / bar / pharmaceutical codes Output 30 W Capacity: 40000 bph Laser wavelength: 10 µm incl. touch panel and control unit
used
Description: Nominal capacity 1500 kg ,, A 500 mm B 3030 mm , Weight without battery 2380 kg Battery weight 700 kg Fork length 1500 mm , Including charger : Manufacturer EB, D400 g 48 / 80 B1 - FML Puls , Battery charger 48 Volt UE 400 Volt IEM 8,0 Ampere 50-60 Hertz A truck with an access ramp will be ordered for collection Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 2,000 mm, weight approx.: 3,030 kg
used
Description: Lifting capacity 1800 kg Simplex mast lifting frame Height of lift 2490 mm , Assembly height 1650 mm , Battery 24 V / 230 A Charger 24 V / 30A Fork length 1500 mm , Approx. Onsite Dimension. (l x w x h): 660 x 1,900 x 1,650 mm, weight approx.: 1,000 kg
used
Doosan gas generator in good condition. It has the following specifications: Manufacturer: Doosan Fuel: Gas Manufacture year: 2008 Kva: 600 Mass: 3740 Other specs: 10 cylinder, electric panel, complete.
used
Fiber Laser welder 1 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Creates smooth joints that achieve strength basic material. ADLCW machine with stable performance that allows their use even under specific conditions. The machine is easy to operate and do not take up much space and can be easily transported.
used
Fiber Laser welder 1,5 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Manual laser welding devices with optical fiber laser emitters are the latest development in the field of welding technologies, which replaced argon arc welding. They are used for welding such metals as stainless steel, iron, aluminum and other metals.
used
Fiber Laser welder 3 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Creates smooth joints that achieve strength basic material. ADLCW machine with stable performance that allows their use even under specific conditions. The machine is easy to operate and do not take up much space and can be easily transported. Laser wavelength - 1064 ~ 1080 nm Pulse frequency - 5000~10000 Hz Cooling method - Water cooling (Chiller) Laser type - Fiber Laser generator - Raycus Guidance and positioning system - Red Point Temperature of the cooling water - 5-45℃ Length of the output fiber - 5/10/15m (optional) Processing width (for cleaning) - 10-80 mm Working temperature - 0-40 ℃ ...
used
Fiber Laser welder 2 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Creates smooth joints that achieve strength basic material. ADLCW machine with stable performance that allows their use even under specific conditions. The machine is easy to operate and do not take up much space and can be easily transported. Laser wavelength - 1064 ~ 1080 nm Pulse frequency - 5000~10000 Hz Cooling method - Water cooling (Chiller) Laser type - Fiber Laser generator - Raycus Guidance and positioning system - Red Point Temperature of the cooling water - 5-45℃ Length of the output fiber - 5/10/15m (optional) Processing width (for cleaning) - 10-80 mm Working temperature - 0-40 ...
used
This DOOSAN Puma 4100B Horizontal Lathe was manufactured in 2018 in South Korea. It is equipped with a maximum workpiece diameter of 550 mm and a maximum workpiece length of 1042 mm. Controlled by a FANUC 0i Series control, it offers a spindle speed of 2000 rpm with a spindle power of 35 kW (30 min) / 22 kW (continuous). This machine accommodates 10 tools and features a A2-11 ASA taper size, providing versatility and precision in machining operations. It comes with chip conveyor, hydraulic, lubrication and cooling system. The machine has a run time of 796 hours, is still under power and can be inspected at any time.
used
This DOOSAN LYNX 220LMA Lathe was manufactured in 2007 in South Korea. It is equipped with a FANUC Oi-TC control. The machine has 2 axes (X-Axis Travel: 175 mm, Z-Axis Travel: 330 mm), a max. turning diameter of 320 mm and a max. turning length of 322 mm. It comes with 24 turret stations and a spindle speed range of 60-6000 rpm. Swing over bed is 510 mm and swing over carriage is 290 mm. This lathe is in good condition, only the coolant pump has an issue which requires a technical review.
used
This DOOSAN V8300MR Lathe was manufactured in the year 2020 in Germany. It is equipped with a FANUC 0iTF Control unit. The machine has a 1 BMT75 Driven Turret with 12 positions (7.5kW, 4500 rpm), a Chip Conveyor with Belt and an axis/spindle Load Monitoring System with triple signal light. It is included a Hydraulic Chuck 15 (380[mm]) and a Standard tool kit: 2 Straight Driven Tools, 2 Angular Driven Tools, 1 Set of Tool Holders for Turning Knives and a Hard Jaws 15 (1 Set: 3 Pieces).
used
This DOOSAN MYNX 5400/50 Vertical Machining center was manufactured in the year 2022 in South Korea and has 1452 production hours, of which 211 are cutting hours. It is equipped with a DN Solutions Fanuc i- Series control unit. The machine has a spindle speed of 6000 rpm.
used
This DOOSAN DNM 400A Vertical Machining center was manufactured in the year 2013 in Korea and has 37790 production hours. It is equipped with a Fanuc control unit and has 3 axis combined with an ISO 40 tool taper. The machine has a spindle speed of 8000 rpm and a spindle motor power of 11 Kw.
used
This DOOSAN HM 630 Horizontal Machining center was manufactured in the year 2007 and has 11272 production hours. It is equipped with a Fanuc Series 18i-MB control unit and has 4 axis. The machine has a spindle speed of 6000 rpm.
used
This DOOSAN DNM 500 (2012) 4-axis Vertical Machining Centre was manufactured in 2012 in South Korea. It is equipped with a 8,000 rpm spindle, BT40 tool taper, a 4th axis (lehmann rotary table - dividing head) and a FANUC control unit. The table size is 1200 x 540 mm (X-axis 1020 mm / Y-axis 540 mm / Z-axis 510 mm). As additional equipment it comes with chip conveyor and internal cooling (IKZ). The machine is in very good condition due to installation of a new spindle and refurbishment of the rotary table in 2021. The rotating union has also renewed recently in 2024. It has operated 24420 run time hours and 9802 cutting hours.
used
This DOOSAN DNM 650 Vertical Machining Centre was manufactured in 2012 in South Korea. It is equipped with a HEIDENHAIN iTNC 530 control and internal cooling - IKZ - 18 bar. This 5-axis machining centre has a ISO 40 spindle with 12,000 rpm and 18kW motor power. It comes with presetting, chip conveyor and a 30 tool magazine. The table size is 1300 x 700 mm.
used
Longitudinal travel X: 1020 mm Transverse travel Y: 540 mm Vertical travel Z: 510 mm Control: Siemens 820D Table length: 1200 mm Table width: 540 mm Maximum weight on the table: 800 kg Tool magazines: 30 Spindle taper: SK 40 Maximum spindle speed: 12000 rpm Spindle motor power: 15 kW ------------------- Length x width x height 3750.0 × 2284.0 × 2703.0 Weight 6500 kg
used
Due To Non-use 60 Hours Of Machining We Sell: Vertical And Horizontal Milling Machine M+z6 With Dimension Display On The 3 Axes - Align Tool Wrench On Vertical Head And Hp5 Fast Head With Mechanical Variator Iso40 Vertical Head With Rest Support Stand Ltf Divider Mod 125 Complete With Disks Ltf Divider Mod 160 Complete With Discs 4 To 2 Arnes Collet Chuck High Precision Base Moulders - Opening 210135 Mm Spindles 5-piece Shank Spindle Set 3-axis Visualizer Pedana
used
Inv. Num. : 7471 Type: UPFS 150/88 XYZ Producer: DOEBELI Created: 1991 Parameters: Control system: Bosch Table diameter: 250 mm Axis X: 150 mm Axis Y: 50 mm Axis Z: 60 h Equipment: Filtration Coolant tank
used
Inv. Num. : 7472 Type: UPFS 150-117 Producer: DOEBELI Created: 1995 Parameters: Control system: Bosch Table diameter: 250 mm Axis X: 150 mm Axis Y: 50 mm Axis Z: 60 mm Equipment: Filtration Coolant tank
used
with CNC control, Fabr. SIEMENS, type: 828D, chuck processing up to: 350 mm, center distance: 1200 mm, max. 4000 rpm, BMT turret with 12 tool positions and driven tools, autom. Part removal, bar machining with counter spindle, diameter: 75 mm, internal tool measurement, with autom. Rod bearings, Fabr. BREUNING, Type: ILS-MUK, Oil Mist Extraction, Chip Conveyor & Coolant Supply
used
ID3252 Doppstadt SM618 Profi year/Year of construction 2001 approx. 1011 hours acc. Counter/hours according to counter 15 t Drum sieve, with 3 sieves (15/20?/50 mm perforation) Drum sieve, with 3 sieves (15/20?/50 mm perforation)
used
ID3253 Doppstadt AK510 K year/Year of construction 2014 approx. 5210 hours/hours 29 t Shredder Shredder
used
ID3259 Doppstadt DW2560 BK Bison year/Year of construction 2003 approx. 8130 hours/hours 28 t Wood shredder, screening system new approx. 1200 hours ago, gearbox overhauled and shaft replaced approx. 1200 hours ago Wood shredder, screening plant new approx. 1200 hours ago, gearbox overhauled and shaft renewed approx. 1200 hours ago
used
Specifications: - Drilling capacity into solid steel ST 60 40 mm - Drilling capacity GG 25 50 mm - Tapping ST 60 M 33 - Tapping GG 25 M 45 - Drilling spindle holder MK - Spindle diameter 55 mm - Quill stroke 200 mm - 18 drilling spindle speeds 35 - 1800 rpm - Drilling feeds 0.075 - 0.60 mm/rev - Height adjustment of the drilling column 450 mm - Drilling radius min / max 305 / 1005 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1900 x H 2800 x D 2300 mm - Weight approx. 1800 kg -with: -Auto. Selection of speeds + feeds - Tapping device - hydr. Columns + Boom Clamping - Coolant device - T – Vertical grooves on the left side of the machine
used
Can seaming machine, semi-automatic, make Lanico, type V110 PH, year 2004 Ü, Can seaming machine, working semi-automatically,, Version: stainless steel,, was in use for beverage cans,, Processing range:, Diameter: from 42 to 163 mm, Height: from 26 to 300 mm, The machine was only driven in one shift and is in good technical condition, with pneumatic clamping and height adjustment., With storage - dispenser for the lid to be folded (56 mm), With 4 format sets for plastic cans with a metal closure with a diameter of 46, 50, 52 and 56 mm, power: up to 850 closures / hour
used
Potato processing line (French fries and split potatoes),, - French fries - line, Potato (French fries) processing line,, Output: approx. 220 kg per hour based on the end product,, French fries dimension 10x10x60 mm, consisting of:, feed bunker with stone catcher,, Carborundum - roller peeler, number of peeling rollers: 7,, Length of the peeling rollers: approx. 2,700 mm, new rollers, with interchangeable roll set for quick replacement of the rolls,, alluvial basin with discharge - elevator,, Bunker conveyor belt, make Marcelissen, type BNT 350-400, Knife block, make Marcelissen, 11x11 mm, Extension conveyor belt with small container, Marcelissen, Roller sorting table, make Marcelissen, type IR 2000-600, Narrow piece sorter, make Marcelissen, type FR4-1750, Flipmaster, make Marcelissen, type 902 MA, With swiveling supports, Continuous fryer make Riehle, type DLA 300 SC-3, 54 kW, vHi, Wit ...
used
Description: Panel Sizing Units 2 PANEL SIZING UNITS 1 Unit : miller hogger PANEL SIZING UNITS 2 Unit : scoring unit Approx. Onsite Dimension. (l x w x h): 3,650 x 2,100 x 2,100 mm, weight approx.: 2,381 kg
used
Extraction system Donaldson Torit DCE-DEFPRO 16 Year of construction: 2011 Power: Motor 22 kW, approx. 16,000 cbm/h, Net weight: approx. 2200 kg Facility immediately available.
used
Description: 2.9m dipper High and low flow lines 700mm offset skid 3m wide GROENEVELD automatic greasing system MORIN hydraulic attachment 3 fixed buckets (2m, 1.5m, 600mm) Overhauled machine Approx. Onsite Dimension. (l x w x h): 9,490 x 2,990 x 3,005 mm, weight approx.: 22,100 kg
used
Description: 2.9m dipper High and low flow lines 700mm offset skid 3m wide GROENEVELD automatic greasing system End of beam As is (scales will be reassembled for sale) Approx. Onsite Dimension. (l x w x h): 9,490 x 2,990 x 3,005 mm, weight approx.: 22,100 kg
used
Description: 2.9m dipper High and low flow lines 700mm offset skid 3m wide GROENEVELD automatic greasing system End of dipper (No attachment, no buckets) Overhauled machine OPERATING MASS: 22400 KG ENGINE POWER: 124,3 Approx. Onsite Dimension. (l x w x h): 9,490 x 2,990 x 3,005 mm, weight approx.: 22,100 kg
used
Inkjet Dating Domino A420i Touch panel Product manual available Year of construction 2014 More details and price on request
used
Dust collector with filter extraction system Voltage: 3X400V Frequency: 50 Hz Propulsion: 5.5 kW Weight: 750 KG Dimensions: L: 2400 mm W: 1300 mm H: 2700 mm Subject to prior sale - errors possible Internal Reference Number: D-1179
used
Description: TRANSPORT DIMENSIONS: Machine body: 3000x2400x2800 mm Evacuator 1: 3200x1900x1300 mm Evacuator 2: 4100x800x1600 mm z-motion: 510 mm, x-motion: 1,050 mm, y-motion: 570 mm, control: FANUC i Series, table surface area l x w : 1050x570 mm, taper: ISO 40, feed range: 1 - 150000 mm/min, weight approx.: 6,500 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,400 x 2,700 mm
used
Description: X1 axis travel: 250 mm (9.8 inches) Z1 axis travel: 1050 mm (41.3 inches) X2 axis travel: 150 mm (5.9 inches) Z2 axis travel: 1030 mm (40.5 inches) Rapid traverse X-axis 20 m/min (787 inches/min) Z-axis rapid traverse: 24 m/min (945 in/min) Max. turning diameter (upper turret)⌀370 mm (14.6 in) Max. turning diameter (lower turret)⌀240 mm (9.4 in) Max. turning length 1000 mm (39.4 inches) Through hole diameter ⌀68 mm (2.7 inches) Lining size: 8 inches Speed 5000 rpm Power18.5 kW (25 HP) Torque 476 Nm (351 ft-lbs) tool shank BMT-KEY tower stations (top) 12 tower stations (bottom) 8 Boring bar diameter⌀40 mm (1.5 inch) Drehlänge: 1,000 mm, x-motion: 250 mm, total power requirement: 18,5 kW, weight approx.: 8,400 kg, Approx. Onsite Dimension. (l x w x h): 3,900 x 2,144 x 1,930 mm