dnc used for sale

Force of pressure: 150 t working width: 4300 mm clear stand width: 3600 mm stand projection: 300 mm maximum height: approx. 500/700 mm operating speed: up / down 41 - 65/10 mm / sec back gauge: 1000 mm Electr. Supply: 400 V, approx. 15 kVA kW weight: 14 t space: 4600 x 1950 x 3100 mm

Standard cylinder with locking unit, DNC-125-500-PPV-A-KP, 163494, Festo, used Top Special price For your info - The current new discounted price of a similar product is € 1955 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company's spare parts warehouse, was only used for a very short time and is in very good condition. Standard cylinder with locking unit, DNC-125-500-PPV-A-KP, 163494, Festo, used-Top, consists of: - Standard cylinder DNC-125-PPV-A (current discounted new price € 419 excl. VAT) - Locking unit KPE-32 (current discounted new price € 1536 excl. VAT) - and a longer piston rod Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, wh ...

x-travel 1,035 mm y-travel 560 mm z-travel 510 mm CNC control SINUMERIK 810D SIEMENS Table size 1200 x 560 mm max. table load 1000 kg Spindle holder SK 40 Spindle speeds 8,000 rpm Drive power - spindle motor 13 kW Infinitely variable feed 20,000 mm/min Rapid traverse 25 m/min Tool changing device 20 pos. Uiwzmu3B22 Coolant Setup Operating voltage 400 V Total power requirement 17 kVA Machine weight approx. 4.1 t Dimensions approx. 2.55 x 2.30 x 2.25 m Chip conveyor 3.80 x 0.90 x 1.55 m - Spindle ON: 5324 h - Control: SIEMENS Sinumerik 810 D - electr. Handwheel -Conveyor - Coolant device

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Festo, standard cylinder type DNC-40-80-PPV-A -Stroke: 80 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm/M12 x 1.25 -Price: per piece -Number: 2 piece -Dimensions: 240/55/H87 mm -Weight: 1.3 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Festo, standard cylinder type DNC-40-50-PPV -Stroke: 50 mm -Piston:Ø 40 mm -Piston rod: Ø 16 mm/M12 x 1.25 -Price: per piece -Number: 4 Stück -Dimensions: 213/53/H87 mm -Weight: 1.2 kg/piece

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: DNC-40-160-PPV-A -Piston: Ø 40 mm -Stroke: 160 mm -Max. Pressure: 12 bar -Dimensions: 325/55/H55 mm -Weight: 1.5 kg

LCD monitor with electronic for Cybelec DNC 800, 804, 806 control . only a few years in use. Supplier / Manufacturer : TSUBIS Germany , Art Nr: LCD10-0072

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 555 mm -Piston diameter: 80 mm -Type: DNC-80-555-PPV-A Q R3 -Pressure: max. 10 bar -Dimensions: 770/93/93 mm -Weight: 8.4 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-32-300-PPV-A -Piston diameter: 32 mm -Stroke: 300 mm -Pressure: max. 12 bar -Dimensions: 455/45/45 mm -Weight: 1.5 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Type: DNC-50-700-PPV-AQ -Pressure: max. 12 bar -Stroke: 700 mm -Piston diameter: 50 mm -Dimensions: 885/65/65 mm -Weight: 5.5 kg

Monforts DNC5 CNC Lathe for sale. control unit: Siemens 810D Find more here - / Contact us at -

Key data: 500 mm, 600 mm

Machine Details Stock-No. 1105-04060 Type of machine CNC Lathe Make MONFORTS Type DNC 5 Year of manufacture 1995 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight basis ex works Price Technical details turning diameter 520 mm turning length 600 mm control Siemens type 840 C Spindle Passage 85 mm Spindle diameter 130 mm swing diameter 560 mm Tool changer 12 Tool changer 12 turning speeds 32-4000 rpm weight of the machine approx. 13 t dimensions of the machine approx. 4.5x5.5x2.1 m Additional information Machine is equipped with a counter spindle. lots of accessories CNC SIEMENS 840 C

swing diameter: 530 mm turning diameter: 150 mm spindle passage: 65 mm control: SIEMENS 840 C travel x1: 175 mm travel y1: +/- 70 mm travel z1: 433 mm travel x2: 175 mm travel y2: +/- 70 mm travel z2: 433 mm spindle turning speed range: 38 - 4000 U/min C-axis: 2 x tool turret: 2 x 12 Pos. number of driven tool stations: 2 x 12 tool shaft (cylinder shaft DIN 69880): VDI 30 total power requirement: 33 kW dimensions of machine L x W x H: 3,95 x 2,49 x 2,6 m Accessories: collet fixtures on main spindle and sub spindle, one collet for main spindle and one for sub spindle, various tool holders (for driven tools as well), various spindle reductions, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 80 mm -Piston diameter: 63 mm -Piston rod: 20 mm -End position cushioning: adjustable on both sides -Max. Pressure: 12 bar -Price: per piece -Number: 1 pieces -Dimensions: 285/75/H75 mm -Weight: 2.35 kg/piece

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 80 mm -Piston diameter: 50 mm -Piston rod: 20 mm -End position damping: adjustable on both sides Quantity: 1 piece -Dimensions: 260/65/H65 mm -Weight: 1.8 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 80 mm -Piston diameter: 50 mm -Piston rod: 20 mm -End position cushioning: adjustable on both sides -Max. Pressure: 12 bar -Dimensions: 300/64/H64 mm -Weight: 1.95 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: DNC-32-160-PPV-A -Piston: Ø 32 mm -Stroke: 160 mm -Max. Pressure: 12 bar -Price: per piece -Number: 2 pieces -Dimensions: 306/45/45 mm -Weight: 1 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-63-160-PPV-A -Piston: Ø 63 mm -Stroke: 160 mm -Max. pressure: 12 bar Quantity: 1 piece -Dimensions: 365/75/H75 mm -Weight: 2.9 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-63-160-PPV-A -Piston: Ø 63 mm -Stroke: 160 mm -Max. Pressure: 12 bar -Dimensions: 470/75/H110 mm -Weight: 3.6 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-80-200-PPV-A -Piston: Ø 80 mm -Stroke: 200 mm -Max. Pressure: 12 bar -Dimensions: 420/95/H95 mm -Weight: 5 kg

Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Manufacturer: Festo, standard cylinder type DNC-63-250-PPV-A -Stroke: 250mm -Piston: Ø 63 mm -Piston rod: Ø 20 mm / M16 x 1.5 -Max. Pressure: 12 bars -Dimensions: 450/75/H75 mm -Weight: 3.6 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-32-400-PPV-A -Piston: Ø 32 mm -Stroke: 400 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -for: proximity switch -Number: 1x available -Price: per piece -Dimensions: 45/45/H545 mm -Weight: 1.7 kg

Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Manufacturer: Festo, standard cylinder type DNC-100-700-PPV-A -Lifting stroke: 700 mm -Piston: Ø 100 mm -Piston rod: Ø 25 mm / M20 x 1.5 -Max. Pressure: 10 bars -Dimensions: 925/110/H165 mm -Weight: 12 kg

Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Manufacturer: Festo, standard cylinder type DNC-63-600-PPV-A -Stroke: 600mm -Piston: Ø 63 mm -Piston rod: Ø 20 mm / M16 x 1.5 -Max. Pressure: 12 bars -Dimensions: 790/75/H110 mm -Weight: 6,2 kg

Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Manufacturer: Festo, standard cylinder type DNC-63-410-PPV-A -Stroke: 410mm -Piston: Ø 63 mm -Piston rod: Ø 20 mm / M16 x 1.5 -Max. Pressure: 12 bars -Dimensions: 605/75/H75 mm -Weight: 4,6 kg

Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Handover: in current condition as seen -Piston rod: without threaded attachment -Manufacturer: Festo, standard cylinder type DNC-32-170-PPV-A -Stroke path: 170 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm / without threaded attachment -Max. Pressure: 12 bar -Dimensions: 295/45/H73 mm -Weight: 1.0 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Festo, standard cylinder type DNC-50-125-PPV-A unused -Stroke: 125 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm / -Hole diameter: 16 mm / hole spacing retracted 368 mm -max. pressure: 12 bar -Quantity: 59 pieces -Price per piece -Dimensions: 400/65/H65 mm -Weight: 2.4 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Festo, standard cylinder type DNCKE-40-2380-PPV-AS -Stroke travel: 2380 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Max. pressure: 8 bar -Quantity: 21 pieces -Price: per piece -Dimensions: 2690/95/H85 mm -Weight: 14 kg/pc.

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Festo, standard cylinder type DNC-32-25-PPV-A 163305 -Stroke: 25 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm / M10 -Max. pressure: 12 bar -Number: 2x cylinders available -Price: per piece -Dimensions: 200/45/H45 mm -Weight: 0.6 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 50 mm -Piston diameter Ø mm -Piston rod: 20 mm (connection M 16 x1.25 thread) -Total length: 230 mm -Total length extended: 280 mm -Air inlet and outlet: adjustable -Quantity: 3 pieces available Price: per piece -Weight: 1.6 kg/piece

turning diameter:370 mm turning length:200 mm Spindle 1 RPM:4000 1/min control:Siemens 840 D Spindle 2 RPM:4000 1/min power capacity:L / R 18/24 kW max. torque on the spindle:630 nM C-Axis:0,001° Turret No.1 stations / rotary tools:12/12 VDI 40 Turret No.2 stations / rotary tools:12/12 VDI 40 turning speed range - milling:3000 1/min power capacity - milling spindle:8,8 kW torque rotary tools:28 Nm Bar capacity spindle 1:85 mm total power requirement:65 kVA weight of the machine ca.:13 t dimensions of the machine ca.:5,7x2,4x2,1 m Travel x1:260 mm Travel x2:260 mm Travel Y1:600 mm Travel y2:600 mm Power Chuck:2 x 250 mm manual tool eye:l & r High performance 6-axis subspindle CNC-Lathe with twin turren and rotating tools.

Pneumatic cylinder with position sensors FESTO DNC-50-40-PPV-A 163370 stroke: 40 mm rod diameter Ø 20 mm with swivel attachment ! Dimensions: 290 x 72 x 65 mm

Pneumatic cylinder with position sensors FESTO DNC-50-125-PPV-A 163374 stroke: 125 mm rod diameter Ø 20 mm with fasteners ! Dimensions: 450 x 75 x 70 mm

Pneumatic cylinder, standard cylinder with locking cartridge FESTO DNC-40-35-PPV-A-KP 16334 KP-16-1000 stroke: 35 mm rod diameter Ø 16 mm with locking cartridge ! Dimensions: 400 x 110 x 60 mm

Pneumatic cylinder FESTO DNC-100-200-PPV-A 163472 stroke: 200 mm Rod diameter: Ø 35 mm pmax: 12 bar used ! Dimensions: 580 x 115 x 160 mm

Pneumatic cylinder FESTO DNC-80-1200-P 163430 stroke: 1200 mm rod diameter Ø 25 mm Piston rod thread: M20 x 1,5 used, tested ! Dimensions: 1540 x 95 x 95 mm

FESTO Standard Cylinder DNC-32-80-PPV-A , 163308 , pmax 12bar Auction-ID: A7-45483-33

FESTO Pneumatic Cylinder 163366 - DNC-50-700-PPV-A-60-K8 , Made in Germany Auction-ID: A7-45483-39

FESTO Standard Cylinder DNC-32-80-PPV-A , 163308 , pmax 12bar Auction-ID: A7-45483-34