dmu 50 used for sale

A Deckel Maho 5-axis CNC milling machine in need of repair is offered. Travel X/Y/Z: 1080mm/710mm/710mm, NC-mounted rotary table C-axis X/Y: 800mm/620mm, swiveling milling head B-axis: 90°, max. spindle speed: 12000rpm, tool taper: SK40, tool positions: 32, control: Heidenhain iTNC 530, control-on hours: 75100h, program run hours: 24720h. Equipped with internal air blast supply, external coolant supply, Heidenhain infrared touch probe, Heidenhain electronic handwheel, Rotoclear rotating inspection window, chip conveyor, oil mist extraction system, coolant system with paper band filter, chip flushing gun, work area light and clamping support next to the mounted rotary table for longer workpieces. The milling head clamping system is leaking, but the machine is still operational. An on-site inspection is possible.

DMG DMU 40 eVo ist ein vertikales Bearbeitungszentrum mit hoher Präzision, Genauigkeit und Zuverlässigkeit. Arbeitsfähigkeiten: Tisch 480x400 mm, 5 T-Nuten (63 mm Abstand, 14H7), Zentrierbohrung 30H6, max. Tischlast 250 kg; Wege X400 Y400 Z375 mm, B -5/+110°, C 360°, Tischdrehzahl 60 t/min. Technische Hauptdaten: Leistung 50 kW, Spindel HSK-A63 bis 24000 min-¹ (stufenlos), Drehmoment 130/86 Nm, Spindelleistung 35/25 kW, Vorschub 0-80000 mm/min, Druckluft 6 bar, 3x400V 50Hz, Abmessungen L2960xB2620xH2530 mm, Gewicht ~7150 kg. Zubehör: FANUC Lade-Roboter, Kühlmittel/IKZ 40/80 bar, TRS2 Werkzeugbruchkontrolle, Laser-Werkzeugvermessung, Späneförderer, Nebelabsaugung, Spülpistole, rotierendes Sichtfenster, Schaltschrank-Klimagerät. Erreicht enge Toleranzen; typische Branchen: Automotive, Luftfahrt, Medizintechnik, Uhrmacherei, Werkzeugbau. Technische Daten ohne Gewähr

x-travel: 735 mm y-travel: 650 mm z-travel: 560 mm control: 840D sl FD operate Siemens Main spindle:: turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 35 / 24 kW max. Torque: 119 Nm tool taper: HSK-A63 DIN 69893 swiveling-rotary-table:: table diameter: 680 mm max. table load: 600 kg max. workpiece sizes: 650 x 650 x 500 mm swivellable: +/- 120 ° rotatable: 360 ° tool magazin:: number of toolpositions: 30 pos. tool taper: HSK-A63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 160 mm max. tool length: 315 mm max. tool weight: 8,0 kg change-time chip to chip: ca. 4,9 sec feeds:: feed speeds: max. 40.000 mm/min rapid traverse: 40 m/min total power requirement: 65 kVA weight of the machine ca.: 11,6 t dimensions of the machine ca.: 4,0 x 3,0 x 2,95 m Documents: Chip conveyor: Coolantsystem: 600 L through spindle coolant: 40 bar paper ba ...

GeneralHorizontal 5-axis universal machining centre; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Cross900 mmLongitudinal850 mmVertical1150 mmNC swivel rotary table integrated in rigid tableType of Measuring systemTable surface 1000 x 850 (Ø 850) mm5. Axes (swivelling range) +120 / -120 (AC) degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 9Slot width 14 mmMaximum load (table centre) 1000 KgCentre bore 50 mmCabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brus ...

Used machine DMU 40eVo linear Machine Type: CNC 5-Axis Milling Center Model: DMU 40eVo linear Manufacturer: DMGMORI Control:CELOS Siemens 840D sl Operate Year of Make: 2022 #001431 Location: Germany Technical data Travel range X-axis approx. 400 mm Y-axis approx. 400 mm Z-axis approx. 375 mm C-axis 360° B-axis -5/+110 ° Workpiece diameter approx. 450 mm Workpiece weight max. approx. 250 kg Speed max. approx. 20,000 rpm Spindle motor approx. 35/25 KW Number of tool positions approx. 120 Rapid traverse approx. 80 m/min Pick-up taper approx. HSK63 Additional axles approx. 2 4th/5th Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 32 kVA Footprint L x W x H approx. 2.05x2.85x2.53 m (without pallet pool) Machine weight approx. 7,500 kg Facilities Dynamic Package for DMU 40 eVo linear - Motor Spindle speedMASTER® HSK-A63 RPM 20-20,0 ...

5-axis machining center, year 2007, 20070 operating hours, CNC iTNC 530. Used machine in good condition. More info & price on IndustrialBuyer.

x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm Control: total power requirement: --- kW weight of the machine ca.: 6,8 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition; it can be tested by prior arrangement.

Key data: 1800 mm, 2100 mm, 1250 mm

We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMU 210 P Year of construction: First commissioning June 2017 Condition: very good – machine set to half tolerance Control: Name: Heidenhain iTNC 530 HSCI Handwheel: Heidenhain HR 520 FS Technical data: • Spindle: 20-12000 rpm // 457 Nm – spindle with increased torque • CNC rotary table Ø 1700 mm • Table load: 8000 kg • B-axis (infinitely variable) • 120x WZW • HSK-A 100 interface • IKZ (internal coolant supply) 80 bar – frequency-controlled • 980 l coolant tank with paper belt filter • Zero-point clamping system incl. extensive accessories – pots, spigots, matching clamping plates, etc. • Chip conveyor • Rinsing gun • Infrarottprobe • Blumlaser • MPC – Machine Protection Control The machine is in very good con ...

5-axis CNC machining center Type: DMU 40 eVo Manufacturer: DMG MORI Year: 2013 Control: Heidenhain iTNC 530 X: 400 mm Y: 400 mm Z: 375 mm B: -5•/+110• C axis Spindle speed: 18000 rpm Spindle taper: HSK 63 Max work diameter: 450 mm Max work height: 460 mm Max work weight: 250 kg Machine weight: 6900 kg Chip conveyor Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinPackage Mill / Turn HSK-A 63Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Table plate C-axis d 680 mm / 26.8 in Speed C-axis 1.000 min-1 Integrated balancing sensor Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20 ...

GeneralUniversal Machining Centre in monoBLOCK construction - MPC Machine Protection Control - Chip trough with integrated coolant tank 500 l / 132 gallon; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal750 mmCross650 mmVertical560 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWTorque (100% DC)86 NmTorque (40% DC)130 NmSpeed range- 20000 rpmSpindle taperHSK-A 63 DIN 69893 Feed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmMiscellaneousClamping SystemDIN 69872 Floor space/WeightWeight approx.12300 KgNC swivel rotary tableTable surface 800 x 650 (Ø 650) mmCentre bor ...

Management Heidenhain MillPlus IT Travel X/Y/Z: 1250 x 710 x 710 mm Spindle speed: 12,000 min-1 Tool magazine for 60 Wkz., SK 40 NC rotary table integrated in rigid table d 800 mm / 1500 mm x 800 mm Controlled NC swivel milling head (B-axis) incl. hydraulic clamping Swivel range -120/+30° Probe Infrared Fabr. Heidenhain TS 649 3D quickSET Expansion Pack Production package 40 bar/23 l/min (theor. Pump capacity)Tank 600 l, paper belt filter, rotating viewing panel Chip conveyor

x-travel: 935 mm y-travel: 850 mm z-travel: 650 mm control: Heidenhain TNC 640 Main spindle:: turning speed range - main spindle: 20000 min/-1 power capacity - main spindel: 35 kW tool taper: SK 40 work table:: table surface area: 1000 x 750 (dia 850) mm max. table load: 1500 kg tool magazin:: number of toolpositions: 60 pos. tool taper: SK40 feeds:: feed speeds: 40.000 mm/min rapid traverse: 40 m/min Accelaration: 5 m/s² c-axis: 360 ° A-Axis: +/- 120 ° total power requirement: 46 kVA weight of the machine ca.: 14 t dimensions of the machine ca.: 3,1 x 4,4 x 3,2 m 5-axis universal machining centre equipped with: - Heidenhain TNC 640 CNC control - 60-position ATC (SK 40) - Heidenhain TS 460 touch probe - Chip conveyor with coolant - Paper belt filter - IKZ 40 bar - Blum laser tool measurement system - NC swivelling rotary table, diameter 850 x 750 mm 16,800 spindle hours and 48,00 ...

Year of construction: 2002 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1800 Y-axis travel mm: 2000 Z-axis travel mm: 1100 C-axis degrees: 360º (0,001) B-axis degrees: -7/+187º Feed rates m/min: 60/40/40 Rapid traverse m/min: 60/40/40 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1700x1400 Max. workpiece weight kg: 5000 Table rotation speed rpm: 200 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: SK 50 Tool magazine slots: 60 Tool changer: Double gripper Chip-to-chip time s: 13.5 Equipment Electronic Handwheel Chip conveyor Rigid table with integrated rotary table Swivel head Infrared probe Internal cooling lubricant supply Rotating inspection windows Ri ...

x-travel:630 mm y-travel:560 mm z-travel:560 mm weight of the machine ca.:6,5 t Number of axles:5 St. spindle turning speed range:18.000 U/min numbers of tools in magazin:24 tool taper:SK 40 Round Table B-Axis

x-travel:1.250 mm y-travel:880 mm z-travel:800 mm spindle turning speed range:1 - 10.000 U/min high speed spindle taper ISO:50 table-size:1.250 x 1.000 mm max. workpiece weight: 2.000 kg feed speeds infinitely variable:1 - 30.000 mm/min rapid traverse speed:40 m/min weight of the machine ca.:16 t dimensions of the machine ca.:7,2 x 4,4 x 2,9 m

x-travel:630 mm y-travel:560 mm z-travel:560 mm total power requirement:10 /15 kW weight of the machine ca.:6500 kg dimensions of the machine ca.: 4,4 x 5,4 x 2,9 m Table dimensions:1000 x 610 mm Loading:400 kg rapid traverse::X 26, Y 26, Z 20 m/min speeds::20 - 12.000 min -1 tool taper:SK 40 Number of tools:20 ( 2 x 10 ) St. control:CNC MillPlus/TNC430 Documents:vorhanden

x-travel:1250 mm y-travel:880 mm z-travel:800 mm spindle turning speed range:1 - 10.000 U/min spindle taper ISO:50 table-size:1250 x 1000 mm max. workpiece weight:2000 kg feed speeds infinitely variable:1 - 30.000 mm/min rapid speed:40 m/min weight of the machine ca.:16 t dimensions of the machine ca.:7,2 4,4 x 2,9 m 5-axes Machining Center with CNC SIEMENS 840 D A-axis 0,001°, C-axis 0,001° autom. toolchanger30-pockets NC table through spindle coolant 40 Bar , chip conveyor

Reinforced steel scissors Round iron scissors Scissors Manufacturers Muhr and Bender Type 50N/22 and 50N/28 50N/22 intersects at 450N/mm2: Round: 22mm Square 22mm Flat: 35x10mm 50N/28 intersects at 450N/mm2: Round: 28mm Square 24mm Flat: 40x15mm Both machines new and ovp Special price

Rieter Press Type SP 500/500

Data sheet of retrofit POS. GE 11.70 Gebhardt 5.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Belt length: 900 mm Length of main conveyor: 5,549 mm (incl. upper bow piece) Length upper bow piece: 613 mm Total width: 610 mm Belt width: 500 mm Belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 650 mm H 2 above 2,300 mm Difference in altitude: + 1,650 mm, trail/slope 19° or 34% Support: Please ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction year: 2007 condition: very good (used) Conveying length in mm: 6449 ...

Gebhardt Belt conveyor system 5549-610-500 with pre-flow belt 900-610-500 RA1005 The belt conveyor system from Gebhardt is from 2007 and is in a very good (used) condition. It has an engine of the brand SEW. The system can be used in up-and-down operation. Inclination angles are adjustable as desired, upper arc and supports can be adjusted. Columns are not included in the scope of delivery. These are optionally available. Consisting of: 1 x pre-flowstrip, 1 x main band, 1 x sheet piece Technical data: Manufacturer: Gebhardt Type: 300.10 Position: GE 12.20 Built: 2007 Condition: very good (used) Engine: fully functional Length main band: 5549 mm (incl. top bow) Nominal/outer width (NB): 610mm Belt width (GB): 500 mm Webbing: slightly structured Length pre-flow belt: 900 mm Length of sheet: 613 mm Webbing: smooth Heights OK Strap: H 1 bottom + 650 mm H 2 top 2,300 mm Height differenc ...

Data sheet of retrofit POS. GE 22.10 Gebhardt 7.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7.449 mm (incl. upper bow piece + straight piece) Upper bow piece length: 392 mm Upper straight piece length: 3,830 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 1700 mm H 2 above 2,800 mm Difference in altitude: + 1.100 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction  ...

Data sheet of retrofit POS. GE 12.05 Gebhardt 7.7 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7,733 mm (incl. upper bow piece + straight piece) Upper bow piece length: 375 mm Upper straight piece length: 1,293 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 2,300 mm H 2 above 4,320 mm Difference in altitude: + 2,020 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction ...

90° roller curve left + 880 mm straight piece as combination Make: Dematic Rolling curve: 90° link running Width: 440 mm Nominal width (overall width incl. sidewalls): 500 mm Inner radius of the curve: 765 mm Straight piece: Length: 880 mm Width: 440 mm Total width: 500 mm Roles, bright zinc-plated Scale: 70 mm Gearmotor: Make Franz Bangert optional Guide on both sides 3 support Height role OK 800 +/-100 mm Features: Running direction: LEFT condition: very good (used) Nominal / inner radius in mm: 765 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES Engine type: Franz Bangert Getriebemotor scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung  ...

Re circulation pump, used Horizontal type NPR 500 system KÖSTER Manufacturer Ritz Atro Built in 1992 Temperature of pumped liquid of 40 ° C Flow 240 l / s Pumping height 1.00 m Power 3 kW Pump speed 480 min Direction of rotation of the impeller left TMU submersible motor drive type Performance of the drive machine 4 kW Installation type horizontal Sufenzahl 1 Axial impeller shape Number of propeller blades 5 adjustable More info and photos on request.

System: Mobile dewatering system on trailer Type: Chamber filter press 500 x 500 Execution: filter press Year of constr.: 2017 refurbished Number of plates: 5 + head and end plate Filter plates: PP Filter cloths: optionally available in voting on the medium Presses contents: approx. 130 dm3 Filter pressure: 15 PSI Material: product-contacting parts flange, traverses stainless steel, PP or rubberized Material: non-product-contacting parts stainless steel Pump technology: In consultation System: The system is delivered as turnkey dewatering equipment ready to plug. Visit: the systems in consultation with us in the work. Other: we deliver the equipment you used ready or refurbished adapted according to your wishes and requirements.

Transformer - Voltage Transformer 500 --> 230V 100kVA Manufacturer Hinzen Type DU80-127kVA Power 100kVA Primae 3x500V 118A Sekundaer 3x230V 263A Hz 50-60 Insulating-Kl.E Special price

Transformer - Voltage Transformer 500 --> 220V 10kVA Manufacturer Flasshoff & Klosterberg Type DTB10kVA JP43 Power 10kVA Primae 3x500V 12A Sekundaer 3x220V 26,20A Hz 50-60 Insulating-Kl.E Special price

Rated power up to 150 kg/h engine power 1.1 (1.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 1100 mm Width 990 mm He 1430 mm Juice pan in 1.4301 / AISI 304 press force 14 to Press pressure 380 bar Juice yield up to 75% Connection for juice drain 30mm High juice drain 470 mm Supplied delivery 7 presses 70x70cm, 8 pressing inserts made of acacia wood 41x41cm ; New machine - best condition

Amlifier card VT 5041 for ENGEL hydraulic

Centrifugal compressor in landfill gas use. Technical data sheet located as an attachment. The compressor is located in a very good condition, is until end of July 2018 in the operation and is very robust (casing). Pressure difference 180mbar and 15 kW drive motor. Radial blower used for landfill gas utilization. Technical specification see attached data sheet. The blower is in good technical condition and still in operation on a bio-gas plant in Germany untill end of July 2018. Pressure drop 180 mbar with 15kW electrical drive.

Hypoid gearbox, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, new -40% Special price The current new price of a similar product is € 3,430 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Low backlash Wittenstein hypoid gearbox (alpha Advanced Line) - Type: SPK+100S-MF3-500-0E1-1S11, I=500, - Suitable for servo motor attachment Siemens 1FK7042-2AF71-1CH1, - Motor side: centring D81mm, for motor shaft D19mm, plug-in sleeve, - Gearbox: centring D90mm, shaft D32mm, Attention: We have the complete winding drive, rewind drive D75mm an ...

Replacement welding controllers 19" for resistance welding machines MPS 8043/1 MPS 8043 Q

Replacement welding controls for resistance welding machines MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1

Premixer Falterbaum Typ: Famix 5000 Capacity: up to max. 5.000 l/h Year of manufacturing: 1973 2-component mixer with Bran + Lübbe pump (syrup and water) including vacuum pump

Hydraulic pump, high-pressure pump -Max. pressure: 500 bar -Hydraulic connections: 7 -Pressure gauge up to: 600 bar -Pressure: can be switched on/off via foot switch -Pressure: mechanically adjustable -Motor power: 0.15 kW at 1370 rpm

Column jib crane, overhead crane, workstation crane -Column jib crane: Lifting capacity 500 kg -Base plate: 755 x 755 mm -Reach: 4100 mm -Total height: 4,065 mm -Hook height: 2,790 mm -Main stroke: m/min -Fine stroke: m/min -Transport dimensions: 4370/1160/H755 mm -Empty weight: 980 kg

Height gauge, parallel gauge, height measuring device, height measuring and marking device, height marker -Manufacturer: Carl Mahr, altimeter -Max. working height: 550 mm -Dimensions: 220/70/H635 mm -Weight: 2.2 kg

Height indicator, parallel indicator -Max. Working height: 500 mm -Hard metal needle -Dimensions: 230/80/H650 mm -Weight: 3.4 kg

Height indicator, parallel indicator -Max. Working height: 500 mm -Hard metal needle -Dimensions: 615/120/H75 mm -Weight: 2.7 kg

Sales due to lack of space LSM500 Turnkey complete system built in 2021 - PC+touch screen - Including labeling software - Compact free-standing booth laser protection class 1 - Viewing window with laser protective glass - Manual access door with safety switch - Light indicators "Laser in operation" - Key switch to activate the laser - Electric height adjustment (tap mode) - Pilot laser - High life expectancy - High beam quality - Gray value labeling - Barcode scanner can be connected - With connector for extraction - Clamping surface with T-slot plate - USB port Technical data: - Labeling field approx. 100 x 100 mm - Laser power pulsed 20 W - Wavelength 1060~1085 nm - Polarization Random - Single pulse energy 20kHz 1.0 mJ 20kHz - Beam quality

Transnorm belt curve conveyor left 90°-700-500-IR900 RA1967 Technical data: Frame width (NB): 700 mm belt width (GuB): 500 mm height (BH): 220 mm height including motor (MH): 480 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees Conveying speed (v m/s) Drive: SEW gear motor Electrical data: 50Hz V230/400, kW 0.37 / S1 Belt:KT58, wear see pictures Year of construction: 1997 Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 1997 condition: gut Nominal / inner radius in mm: 900 Nominal / outside width in mm: 700 Belt width in mm: 500 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,37/S1 scope of delivery: ohne Frequenzumrichter, without supports and side guides If you need other dimensions or individual ...

CENTRAX 501-KB7 GAS TURBINE FOR SALE CENTRAX 501-KB7 gas turbine generator set, manufactured in 2008, available for sale. Main Specifications Manufacturer: CENTRAX Model: 501-KB7 Year: 2008 Fuel: Natural Gas Operating Hours: Approx. 30,000 hours Generator / Alternator: Leroy-Somer (LS) Rated Power: 6,650 kW Application: Power Generation Condition & Maintenance The gas turbine has accumulated approximately 30,000 operating hours. Major overhaul is due / required. The unit is offered for sale in its current condition (as-is, where-is). A technical inspection can be arranged for serious prospective buyers. Additional Information Available Upon Request Detailed photographs of the complete installation Nameplate photographs Available technical documentation Maintenance history Generator specifications List of auxiliaries and equipment included in the s ...

ABLEPick Picking tag AT-505 Rev 1.3 RA2336 S/N A17610000-2302 102AT505000004G V1.1 Product dimensions: 147 x 46 x approx. 20 mm Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Hersteller: Ablepick

description: Here we offer used safety light barriers of the brand Leuze. These photocells are already installed in the original bracket of Leuze and these brackets are equipped with two sensors + counter mirror. After delivery / pickup, you have the right to return the photocells without giving reasons, within 2 weeks unfree and get back the purchase price afterwards. Furthermore we offer used inverters of the VLT 5000, 2800, FC and FCD series in different designs and performance levels. Also with or without BUS card. Before delivery, the inverters are professionally formatted to allow an uncomplicated re-start. DRINK has more than 4,000 mainly used but also original packaged components in stock. Including Siemens S5 / S7 PLC. Contact us, if you can not find the right component. All statements without guarantee. Besides buying and selling of conveyors and machine ...

SINGLE SHAFT SHREDDER, V Rotor width 1.500 mm. Rotor diameter 500 mm 16.69″ Motor power 90 kW n.82 knives 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star-delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - v ...

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed (and throughput rate) can be adjustable to change throughput rate 500 to 1.000 kg/h, by adding an inverter, Low water consumption (depending on contamination), The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- round-type) (available separately), This machine is to be electrically connected to an  ...