dmu 50 evolution used for sale

Control: Siemens Travel X/Y/Z: 350 x 240 x 340 mm Spindle speed 6300 min-1 Tool holder SK 40 Manual swivel rotary table Tool holder Vice Accessories

x-travel: 350 mm y-travel: 240 mm z-travel: 340 mm turning speed range: 20 - 6.300 U/min feed speeds: 1 - 5.000 mm/min rapid traverse: 5 m/min tool taper: SK 40 power capacity: 6,3 / 10 kW control: Sinumeric 810 D tool change unit: pneumatisch manuell total power requirement: kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: ca. 2 x 2 m 11065352834 5-sided universal milling machine Rotary table with swivel axis (clamping surface 400 x 290 mm) Rotation range C-axis displayed 360 ° on the screen B-axis swivel range +105 / -15 ° shown on the screen Table load capacity 100 kg, Operating modes 2 and 3, prepared for Net service, programming instructions included, RS 232 C interface Operating mode 4 (extended manual intervention) Accessories: coolant device, electronic handwheel Machine is workshop tested and with electrical Acceptance report The data for this ad was create ...

Deckel Maho Universal Machining Center CNC DMU 70 VL Deckel Maho Manufacturer [manufacturer]: Deckel Maho (DMG) Typ [ type]: DMU 70 VL [control unit]: Heidenhain TNC 430C Jahr [construction year]: 2002 Travel range [travel path]: X= 710mm Y=520mm Z=520mm spindle rotation speed: 20-18,000 rpm Main spindle power: 36 kW IKZ internal coolant supply Tool changer: 2 x 32 places Tool holder: SK 40 to DIN2080 Cooling system: Knoll Chip conveyor: 2 units/units Weight [weight]: 12.800kg Dimensions [needed space]approx. (L x W x H): 5.3m x 2.75m x 2.75m Technical documentation/documents available in detail

Ref. -No.: 10144 Manufacturer: DECKEL Year of construction: 2001 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 11130000713 X-Travel: 880 mm Y-Travel: 630 mm Z-Travel: 630 mm Machine length: 3600 mm Machine width: 2700 mm Machine Height: 2500 mm Table Dimensions (Lengthxwidth): 1250 x 700 mm Table Load: 1000 kg Max. Workpiece Weight: 8 kg Tool Taper: SK 40 Tool Piece Magazine With: 32 Pcs./pcs. Spindle Speed: 18.000 RPM Rapid Traverse: 30 m / min Total connected load max.: 37 kVA Weight Of The Machine Ca.: 9 t Operating hours: 42.340 H Further information: Additional information: • Table: swivel milling head

Key data: 630 mm, 560 mm, 560 mm

Year of construction 2003 Heidenhain control MC 422 18200 Spindle hours NC rotary table installed in rigid table 1000 x 600 mm Controlled B-axis 24-fold tool changer Workspace Tool holder SK40 Motor spindle 12000 rpm Incl. coolant system, chip conveyor (auger) Top condition! Machine weight 6500 kg Transport dimensions: 3.5 x 2.7 x 2.21 m

Control: iTNC 530 Max.travel range: X 500 mm Y 450 mm Z 400 mm A +5 / - 110? - manual C nx 360? - manual Spindle speed ? 10000 rpm Taper ? SK 40 Tool changer ? 16 positon measuring probe for parts set up 3 axis + 2 axis (dividing head) Tool pr

Universal Milling & Drilling Machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 124 Year of construction: 2001 Travels: X 500 Y 400 Z 400 Speed range: 20 – 4,500 rpm infinitely variable With the following accessories: Manual swivel – rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Electronic Handwheel for X, Y, Z Axis Splash protection booth Machine light 4 pcs. Height-adjustable machine shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm Control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 / 82 Nm tool taper: HSK A63 swivellable: B: 0 - 190 ° swivle time: 1,2 s NC-Rotary table:: table diameter: 900 x 700 mm max. table load: 1.400 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 60 pos. tool taper: HSK A63 change-time chip to chip: ca. 5,0 sec feeds:: rapid traverse ( X / Y / Z ): 60 m/min rapid traverse: B: 30 m/min rapid traverse: C: 30 m/min feed speeds: max. 60.000 mm/min total power requirement: 64 kVA weight of the machine ca.: 14,0 t dimensions of the machine ca.: 6,0 x 6,5 x 3,2 m Documents: Coolantsystem: high pressure coolant: through spindle coolant: 40 bar turning milling head: NC-rotary table: Tool Magazine: Chip conveyor: test probe: Heidenhain TS 640 tool mo ...

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 / 82 Nm tool taper: HSK-A 63 swivellable: B: +30° / -120 ° NC-Rotary table:: table surface area: Ø 700 / 1.250 x 700 mm max. table load: 650 kg rotatable: C: 360 ° max. workpiecediameter: 850 mm max. workpiece height: 550 mm tool magazin:: number of toolpositions: 32 pos. tool taper: HSK-A 63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 160 mm max. tool weight: 8,0 kg change-time chip to chip: 10 sec feeds:: feed speeds: max. 30.000 mm/min rapid traverse: 30 m/min Accelaration: 5 m/s² total power requirement: 48 kVA weight of the machine ca.: 14,0 t dimensions of the machine ca.: 6,5 x 5,0 x 2,9 m Documents: Chip conveyor: Coolantsystem: test probe: Heidenh ...

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 10.000 min/-1 power capacity - main spindel: 13 kW Torque: 13 Nm tool taper: SK 40 work table:: table surface area: 1.250 x 700 mm max. table load: ca. 500 kg table diameter: 700 mm T-slots: 11x 14 x 63 mm max. table speed: 15 min/-1 tool magazin:: number of toolpositions: 32 (2x 16) pos. tool taper: SK 40 max. tool diameter: 80 / 130 mm max. tool-dia with free toolbox: 160 mm max. tool length: 315 mm max. tool weight: 8,0 kg feeds:: feed speeds: 20 - 15.000 mm/min rapid traverse: 12 m/min total power requirement: 30 kVA weight of the machine ca.: 9,0 t dimensions of the machine ca.: 4,0 x 3,0 x 2,5 m Documents: swarf management system: Coolantsystem: NC-rotary table: elektr. hand wheel: Automatic Tool Changer: tool setting: CNC - MachiningCen ...

Deckel Maho Universal Milling Machine DMU 125 P 1,250 x 880 x 800 mm Motor spindle 18,000 1/min. Tool holder SK 40 Automatic Swivel Milling Head Horizontal tool changer setup Double gripper 30 magazine slots Coolant tank 600 litres Internal cooling IKZ Form AD Conveyor Rotating viewing panel 3D path control TNC 430 NC rotary table diameter 1,250 x 1,000 mm Universal milling head with controlled B-axis Electronic handwheel Probe Infrared Heidenhain TS 631

x-travel: 1.600 mm y-travel: 1.250 mm z-travel: 1.000 mm Control: HEIDENHAIN iTNC530 Nc rotary table: : surface area: Ø 1.500 x 1.250 mm : 0,001 ° workpiece weight max.: 4.000 kg Universal Milling Head: - B-axis: stufenlos + 180 / - 7 ° resolution: 0,001 ° max. power ED 40 %: 28 kW Speed range, stepless: 20 - 18.000 min-1 feed, rapid traverse:: - feeds x/y/z -stepless: 0 - 15.000 mm/min rapid in X/Y/Z: 60.000 mm/min tool magazine: - Number of tool places: 60 St tool taper: HSK-63 DIN 69893 Form A voltage: 3 x 400 V operating frequency: 50 Hz Overall size: - Space requirement: ca. 8,8 x 8,8 x 3,5 m weight of the machine ca.: 35.000 kg Versatile 5-axis universal machining center with NC – Rotary table, tool magazine and large loading door at the front. • NC-swivelling milling head with 18,000 rpm motor spindle for 5 -axis simultaneous machining • 3D CNC - -Control HEIDENHAIN  ...

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm control: Siemens 840D total power requirement: 13/9 kW weight of the machine ca.: 4,7 t dimensions of the machine ca.: 3,4 x 2,5 x 2,2 m Brand DMG Mori Seiki Machine no F652 Type DMU 50 Ecoline Control Siemens 840D Year of make 2012 Table width 500 mm Table diameter 630 mm ø Table adjustable in degrees X 500 mm Y 450 mm Z 400 mm Spindle taper SK40 Speed minimum 20 RPM Speed maximum 10.000 RPM Maximum table load 200 kg Chip transport Machine size 3.400 x 2.500 x 2.200 mm Machine weight 4.700 kg Tool magazine positions: 30 B-as: -5/+110 ° C-as: 360 ° Engine power: 13/9 Kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 12.000 min/-1 power capacity - main spindel: 15 / 10 kW max. Torque: 125 Nm tool taper: MAS BT 40 swivellable: B: 103 ° feed:: feed speeds: 20 - 10.000 mm/min rapid traverse X-axis: 26 m/min rapid traverse Y-axis: 26 m/min rapid traverse Z-axis: 20 m/min Resolution: 0,001 mm input unit: 0,001 mm work table:: surface area: 1.000 x 600 mm rotary table dia.: 600 mm number of T-slots: 8 / 1 T-slot - width: 14 H12 / 14 H7 T-slot - distance: 63 mm max. table loading capacity: 350 kg rotatable: C: 360 ° Tool-Presetter:: number of toolpositions: 24 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 315 mm max. tool weight: 8 kg total wight: max. 100 kg total power requirement: 26 kVA weight of the machine ca.: 6,7 t di ...

Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmGeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS X with HEIDENHAIN TNC7 Tool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgNC swivel rotary tableTable surface Ø650 mmCentre bore 32 mmMaximum load (table centre) 600 KgRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +/- 120 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 63 mmNumber of Slots 9Slot width 14 mmIntegrated motor spindle speedMASTER®Drive ...

x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm Control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 / 82 Nm tool taper: HSK-A63 swivellable: B: 0 - 190 ° swivle time: 1,2 s NC-Rotary table:: table diameter: 900 x 700 mm max. table load: 1.400 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 40 pos. tool taper: HSK-A63 change-time chip to chip: ca. 5,0 sec feeds:: rapid traverse ( X / Y / Z ): 60 m/min rapid traverse: B: 30 m/min rapid traverse: C: 30 m/min feed speeds: max. 60.000 mm/min total power requirement: 64 kVA weight of the machine ca.: 14,0 t dimensions of the machine ca.: 6,5 x 6,5 x 3,5 m Documents: Coolantsystem: high pressure coolant: through spindle coolant: 40 bar turning milling head: NC-rotary table: Tool Magazine: Chip conveyor: tool monitoring: BLUM Laser elektr. h ...

GeneralUniversal machining centre; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical80000/80000/80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal800 mmCross650 mmVertical550 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,56 x 7,98 x 3,05 mWeight approx.12000 KgIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWTorque (100% DC) 86 NmTorque (40% DC) 130 NmSpeed range -20000 rpmSpindle taper SK40 - BIG-PLUSClamping System DIN ISO 7388Dynamic package DMU 80 eVo linearDynamic package for DMU 80 eVo linear linear drive X/Y-axis with  ...

DECKEL MAHO DMU 160P duoBLOCK CNC Machining Center TECHNICAL FEATURES: Year: 2008 CNC Type: HEIDENHAIN TNC 530 Number of continuous axes: 5 X-axis stroke: 1600 [mm] Y-axis travel: 1250 [mm] Z-axis travel: 1000 [mm] X, Y and Z axis travel speed: 15000 [mm/min] Fast travel speed X, Y and Z: 60000 [mm/min] Table dimensions: Ø1500 x 1250 [mm] Maximum weight Tabletop Allowable: 4000 [Kg] Pin attachment: SK 40 (DIN 69871) Minimum speed. Spindle: 20 [rpm] Maximum speed Spindle: 12000 [rpm] Number of tool magazine stations: 60 Machine weight: 35000 [Kg] EQUIPMENT INCLUDED: x1 HEIDENHAIN workpiece probe x1 Laser Gauge x3 HEIDENHAIN measuring rulers on the X, Y and Z axes x1 Watering Center Spindle x1 Chip Conveyor x1 Paper Filtration Unit More information on request.

x-travel: 2050 mm y-travel: 520 mm z-travel: 520 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Heidenhain TNC 430 2x 32-fold tool changer coolant device 2x chip conveyor measuring feeler The hole X-axis travel is 2050mm. You can work in one move 2 meters. A dividing wall is also with the machine. Then the X-travel will be split. Technische Daten / technical details: X-Weg / X-travel 2050 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 520 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Werkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kW Gewicht ca. / weight 12800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are  ...

x-travel: 350 mm y-travel: 240 mm Ucblcnl2H9 z-travel: 340 mm Speed: 20 - 4,500 1/min Table: D 400 x 280 Control: 810 D Shop mill SIEMENS Tool holder: SK 40 Rapid traverse: 5 m/min Spindle: 6.3 / 10 kW Total connected load: 15 kVA Approx. space requirement: 1.7 x 1.55 x 2.1 m Universal CNC Milling Machine, Rotary swivel table manual with angle display on the screen, El. Handwheel

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinChip removalChip removal: manual, from the chip troughCoolant supplyCoolant supply: Multi-jet strip at spindle head, switchable from coolant to air (max. 6 bar / 90 psi, 6 water jets, 6 air jets) Pump capacity: 70 l/min / 18 gallon/min (theoretical pump performanc ...

x-travel: 350 mm y-travel: 240 mm Ucblcnl2H9 z-travel: 340 mm Speed: 20 - 4,500 1/min Table: D 400 x 280 Control: 810 D Shop mill SIEMENS Tool holder: SK 40 Rapid traverse: 5 m/min Spindle: 6.3 / 10 kW Total connected load: 15 kVA Approx. space requirement: 1.7 x 1.55 x 2.1 m Universal CNC Milling Machine, Rotary swivel table manual with angle display on the screen, El. Handwheel

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: HEIDENHAIN iTNC 530 Table dimensions: 500 x 380 mm table weight: 500 Kg c-axis: 0.001º ( ± 360º) 0 b-axis: 180 ° rapid traverse X-axis: 80 m/min feeds: 50 m/min spindle turning speed range: 18.000 U/min spindle taper: BT- 40 spindle drive: 30 kW Internal cooling system: 40 bar handwheel: HEIDENHAIN HR-410 total power requirement: 50 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: m Chip conveyor: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of manufacture 2001 Heidenhain TNC 310 Travel distances 350 x 240 x 340 Spindle speed 20 - 5000 Drive power 6.3/10 KW Total connected load 15 kW Tool holder SK40 Accessories: el. Handwheel Universal swivel rotary table 400 x 280 mm, Rotation range 360°, swivel range +105/-15° with electronic angle display Coolant Setup

Inv. Num. : 5211 Type: DMU 80 P Producer: Deckel Maho Generated: 2000 Parameters: Control system: Heidenhein TNC 430 Switch-on hours: 87285 h Hours: 34100 h Minimum vertical spindle speed: 20 1/min Maximum vertical spindle speed: 12000 1/min X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Cone: ISO 40 Number of all tools: 30 pieces Equipment: IKZ Workpiece Probe Conveyor Spindle cooling 2020: Replacement of the PILS contactors New E/R module New X/Y Module 2019: Lock Replacement Workpiece Probe Sensor Replacement Replacing the hydraulic hose of the tool clamp 2018: New X/Y axle bolt Replacement of the Y-axis blind Replacement of the B-axis planetary gearbox New motor and B-axis measuring cable 2016: New spindle bearings System Replacement Replacing the UV105 power supply Replacement of the spindle mod ...

COOLANT UNIT for DMU 160P. General Aspects COOLANT TANK CAPACITY (L): 1.300 FILTER CAPACITY (L/MIN): 600 MOTOR: MOTOVARIO SW040 T 100 POWER (KW): 0,12

Key data: 600 mm, 525 mm, 200 mm

Tool Milling Machine - Universal DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial No.033 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled Machine is sold as a defect

Key data: 600 mm, 525 mm, 500 mm

Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial no.023 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled

Key data: 600 mm, 525 mm, 500 mm

Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial.no.063 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled

Key data: 710 mm, 520 mm, 520 mm

TECHNICAL DETAILS X-axis travel:710 mm Y-axis travel:520 mm Z-axis travel:520 mm Rapid traverse X-axis:30 m/min Y-axis rapid traverse:30 m/min Rapid traverse Z-axis:30 m/min X-axis feed speed:10 m/min Y-axis feed speed:10 m/min Z-axis feed speed:10 m/min Overall height:3,300 mm Overall length:4,600 mm Overall width:5,500 mm Total weight:6,000 kg Spindle speed (min.):20 rpm Spindle speed (max.):12,000 rpm Spindle motor power:25,000 W Input voltage:400 V Type of input current:three-phase Work table length:700 mm Worktable width:500 mm

This 5-axis DMG MORI DMU 50 3rd gen was manufactured in 2017. It features impressive axis travels of 650 x 520 x 475 mm and a maximum spindle speed of 15,000 rpm. The machine includes a tool magazine capacity of 60 positions and a robust table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 50 3rd gen vertical machining centre we have for sale. Contact us for further details.

Technical data (XYZ): X 980 mm / Y 630 mm / Z 630 mm Control: HEIDENHAIN iTNC 530 Miscellaneous: 32-tool changer, 24,000 rpm, HSK63/BT40/CAT40, rotary table, swivel head, internal coolant supply, chip conveyor.

x-travel:600 mm y-travel:700 mm z-travel:60 mm tool taper:SK40 magazine place:30 Stück table surface area:630 mm 5axis-CNC-Milling Machine Make: DMG Type: DMU 60 P YOM: 2004

x-travel: 1250 mm y-travel: 880 mm z-travel: 800 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: 63 l tank: 250 l Pressure power: 1,5 (max. 2,5) bar total power requirement: - kW weight of the machine ca.: 100 kg dimensions of the machine ca.: 1,40,61 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Cross650 mmLongitudinal735 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools90 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12400 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mmNumber of Slots 9Rotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRot ...

GeneralUniversal Machining Centre in monoBLOCK construction - MPC Machine Protection Control; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal750 mmCross650 mmVertical560 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWTorque (100% DC)86 NmTorque (40% DC)130 NmSpeed range- 20000 rpmSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmMiscellaneousClamping SystemHSK-A 63 Floor space/WeightWeight approx.12300 KgNC swivel rotary tableTable surface 800 x 650 (Ø 650) mmCentre bore 50h6 mmMaximum load (table centre) 600 KgDirect measuring systemDir ...

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal400 mmCross400 mmVertical375 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mWeight approx.7200 KgDie and Mold Package linearDie and Mold Package linear Dynamic package V-type Eagle timing belt for Z axisPackage Mill / TurnPackage Mill / Turn (only available for Siemens 840D solutionline) NC-Mill-turn table 450x450 mm / 17.7x17.7 in rounded down to d460 mm / 18.1 in C ...

GeneralHorizontal universal machining center; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal650 mmCross700 mmVertical950 mmCabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDriveNC swivel rotary table direct drive Table plate: d 650 mm / 25.6 in 1 x T-slot 14 H7 / 0.55 H7 (alignment groove, table centre) 8 x T-slot 14 H12 / 0.55 H7 (clamping grooves) Permissible load: 600 kg / 1,323 lbs Rotary-axis: 80 min-1 direct drive Swivel-aKinematics a ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1Drive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWSpeed range 20 - 15000 rpmTorque (40% DC) 121 NmTorque (100% DC) 84 NmSpindle taper HSK-A 63Clamping System HSK-A 63Tool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationTool magazine 60 ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmVertical420 mmCross450 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® toolsDrive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWTorque (100% DC) 84 NmTorque (40% DC) 121 NmSpeed range 20 - 15000 rpmSpindle taper SK40 Tool holder DIN ISO 7388-1-AClamping System DIN ISO 7388-3-A, ADToolchanger with set up station for tool loadingNumber of tools 30NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformat ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® toolsDrive power (100% DC) 14,5 kWSpeed range 20 - 15000 rpmTorque (40% DC) 121 NmTorque (100% DC) 84 NmDrive power (40% DC) 20,3 kWSpindle taper HSK-A 63Clamping System HSK-A 63Tool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working p ...

Inv. Num. : 8243 Type: DMU 60 P Producer: DMG Generated: Parameters: Work table length: 1000 mm Work table width: 600 mm Number of axles: 5 pieces X-axis travel: 600 mm Y-axis travel: 525 mm Travel Z axis: 500 mm Speed: 12000 1/min Machine weight: 4000 kg

Control Heidenhain ... TNC 530 Clamping table surface ... 600x1000mm Axis X ... 630mm Axis Y ... 560mm Axis Z ... 560mm Spindle speed ... 0-12000 rpm controlled axes ... 5 cooling HSK 63 Table diameter ... 600mm Magazine spaces ... 24 Main engine power ... 15/10kW Max. workpiece weight ... 500kg The machine is in good condition, possible to test under power.

x-travel: 450 mm y-travel: 400 mm z-travel: 400 mm control: Heidenhain Mill Plus V600 total power requirement: kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 1/min Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axis Clamping surface Ø 700 x 500 mm max. table load 200 kg Infrared Probe Workpiece Measurement

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: HEIDENHAIN control: MillPlus iT table surface area: ø 500 x 380 mm B-axis: 0 - 161,955 ° C-axis: 360 ° spindle taper: SK 40 spindle turning speed range: 20 - 18.000 U/min spindle power: max. 35 kW max. torque on the spindle: max. 130 Nm feeds -stepless-: bis 20.000 mm/min rapid traverse X/Y/Z axis: 80 / 50 / 50 m/min rapid traverse B-axis: 40 U/min C-axis rapid feed: 50 U/min no. of tools in magazin: 30 tool diameter if 2 vacant positions: 130 mm tool diametre at full load: 80 mm tool length - max.: 300 mm weight of tools max.: 6 kg internal coolant system feed: 40 bar total power requirement: 52 kVA weight of the machine ca.: 6 t = 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter device The data for this ad was created with ModulMWS - the  ...

Key data: 500 mm, 450 mm, 400 mm

Brand DMG Mori Seiki Machine No: F652 Type DMU 50 Ecoline Control Siemens 840D Year of construction 2012 Table width 500 mm Table diameter 630 mm ø Table adjustable in degrees X 500 mm Y 450 mm Z 400 mm Spindle Taper SK40 Minimum speed 20 RPM Maximum speed 10,000 RPM Maximum table load 200 kg Chip transport Machine size 3,400 x 2,500 x 2,200 mm Machine weight 4,700 kg Magazine slots: 30 B-axis: +110/-5° C-axis: 360° Engine power: 13/9 Kw

x-travel: 730 mm y-travel: 560 mm z-travel: 560 mm control: iTNC 530 Heidenhain NC-Swivle milling head:: turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 10 / 15 kW max. Torque: 130 / 87 Nm tool taper: HSK-A63 swivellable: NC: +30 / -120 ° work table:: table surface area: 1.000 x 600 mm T-slots: 9x 14 x 63 mm NC-Rotary table:: table diameter: 600 mm rotatable: C: 360 ° max. table load: 500 kg tool magazin:: number of toolpositions: 60 pos. tool taper: HSK-A63 total power requirement: 40 kVA weight of the machine ca.: ca. 11,0 t dimensions of the machine ca.: 4,5 x 4,5 x 3,5 m Documents: Chip conveyor: Coolantsystem: Coolant through spindle: AD high pressure coolant: 20 bar turning milling head: NC NC-rotary table: elektr. hand wheel: test probe: TS 640 Heidenhain elektr. hand wheel: iTWC 530 tool setting: BLUM Laser 3D quickSET: Signal lam ...

Axes: 5, travel X/Y/Z: 400mm/400mm/375mm, spindle speed: 18000rpm, power: 35kW, tool holder: HSK-A63, tool positions: 60, rapid traverse: 30m/min, table dimensions X/Y: 480mm/480mm, max. workpiece weight: 250kg, machine weight: approx. 8150kg, operating hours: approx. 50950h, spindle hours: approx. 20200h. The lifting and swivel unit of the pallet changer are defective. Documentation available. An on-site inspection is possible.