dmg 300 used for sale

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Oil- and Emulsion Mist SeparatorOil- and Emulsion Mist Separator Note: 1. Option available only for PRO version.Air coolant external and internalAir coolant external and internal (through spindle centre) switchable via M-FunctionElectronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperBT 40 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)Tool Clamping BT 40Tool Clamping BT 40 for pull-studs DIN 69872 (differently from standard)Air coolant external and internalAir coolant external and internal (through spindle centre) switchable via M-FunctionElectronic HandwheelExternal electronic Handwheel

CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperBT 40 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)Tool Clamping BT 40Tool Clamping BT 40 for pull-studs DIN 69872 (differently from standard)Electronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmRapid feed X / Y / Z24/24/24 m/minDimensions (L x W x H)3,07 x 2,67 x 2,84 mMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)Tropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperatureSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Oil- and Emulsion Mist SeparatorOil- and Emulsion Mist Separator Note: 1. Option available only for PRO version.Air coolant external and internalAir coolant external and internal (through spindle centre) switchable via M-FunctionElectronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Air coolant external and internalAir coolant external and internal (through spindle centre) switchable via M-FunctionElectronic HandwheelExternal electronic Handwheel

CharacteristicsTable surface850 x 650 mmSpeed max.12000 rpmDrive power (100% DC)9 kWDrive power (40% DC)13 kWDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electroni ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (100% DC)9 kWDrive power (40% DC)13 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electroni ...

CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mMovement X / Y / Z550/550/510 mmRapid feed X / Y / Z24/24/24 m/minSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmTool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmSpindle taperSK 40 DIN 69871 Movement X / Y / Z550/550/510 mmRapid feed X / Y / Z24/24/24 m/minDimensions (L x W x H)3,07 x 2,67 x 2,84 mWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Max. torque83 NmTorque (100% DC)57 NmTool Magazine with24 PositionsDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

CharacteristicsTable surface850 x 650 mmRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)Tropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperatureSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

Description: serial no.: 14565616324 operating voltage: 400 V frequency: 50 HZ connected load: 19 kVA nominal current 35 A internal coolant unit, 40 bar motor drive power 40% DC: 14,5 kW, nominal power 100%: 11,5 kW max. spindle torque value 40% DC: 121 Nm, nominal torque value 100% DC: 84 Nm path measuring system resolution X, Y and Z-axis: 0,01 µm distance between T-slots: 100 mm number of clamping slots/size: 4 / 14H12 slot/size: 1 / 14H7 max. table load: 800 kg delivery height (floor-upper edge of table): 800 mm inclusive chip conveyor and coolant unit ,of manufacturer KNOLL read off spindle hours: 22322 h attention: without clamping element on table transport width: 2300 mm see also video z-motion: 475 mm, x-motion: 650 mm, y-motion: 520 mm, control: SIEMENS CELOS ERGOLINE, table surface area l x w : 960 x 570 mm, taper: SK 40, toolchanger positions: 20, tur ...

GeneralVertical Machining Center; Control: Control SINUMMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelLifting KitLifting kit Required option for customers using a crane to unload and move the machine.

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Air coolant external and internalAir coolant external and internal (through spindle centre) switchable via M-Function

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mMovement X / Y / Z550/550/510 mmRapid feed X / Y / Z24/24/24 m/minSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

General2 Axes Universal Turning Machine - tool drive - C axis - Y axis - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® multi-touch control Working areaSwing diameter over guide ways700 mmSwing diameter over transverse guideway370 mmBar diameter max.80 mmTurning diameter400 mmSlide 1Longitudinal stroke830 mmTransverse stroke271 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y22,5 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)630 NmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,0 x 2,66 x 1,94 (4,30 x 2,43 x 1,94) mWeight approx. ...

General2 Axes Universal Turning Machine - tool drive - C axis - Y axis - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® multi-touch control Slide 1Longitudinal stroke830 mmTransverse stroke271 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y22,5 m/minWorking areaSwing diameter over guide ways700 mmSwing diameter over transverse guideway370 mmTurning diameter400 mmBar diameter max.80 mmMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmC-Axis Speed-200 rpmMax. torque (40% DC)426 NmTorque of C-Axis (holding torque)630 NmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,0 x 2,66 x 1,94 (4,30 x 2,43 x 1,94) mWeight approx. ...

Inv. Num. : 7145 Type: DMC 635 V eco Producer: DMG Created: 2014 Parameters: Control System: Fanuc Series Oi-MC Work table length: 790 mm Work table width: 560 mm Maximum table load (uniform): 600 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 635 mm Y-axis travel: 510 mm Z-axis travel: 460 mm Machine height: 2650 mm Machine length: 2050 mm Machine width: 2530 mm Machine weight: 3900 kg 2023: Spindle replacement

turning diameter: 700 mm turning length: 1250 mm control: Sinumerik 840D SL total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Siemens 840D sl control 3-jaw chuck milling spindle (B-axis) Y-axis steady rest 120-fold chain magazine (Capto C6) tail stock chip conveyor coolant device Technische Daten / technical details: max. Umlaufdurchmesser / max. rotary diameter 700 mm max. Drehdurchmesser / max. turning diameter 700 mm max Drehlänge / max. turning length 1250 mm X-Achse / X-axis 800 mm Z-Achse / Z-axis 1300 mm Y-Achse / Y-axis +-210 mm Drehzahl Frässpindel /speed of milling head 12000 UpM / rpm Drehzahlbereich Spindel/ spindle speed 5000 UpM / rpm Schwenkbereich B-Achse/swivel range B-axis +-120 ° Eilgang B-Achse/ rapid feed B-axis 100 m/min Eilgang X,Z,Y / rapid feed X,Z,Y 50,50,50 m/min Antriebsleistung Spindel (40%ED) ...

Inv. Num. : 7394 Type: ecoMill 70 Producer: DMG Created: 2016 Parameters: Maximum spindle speed: 12000 1/min X-axis travel: 750 mm Y-axis travel: 600 mm Z-axis travel: 520 mm Machine weight: 7,800 kg Equipment: Workpiece probe Tool Probe

x-travel: 730 mm y-travel: 730 mm z-travel: 880 mm control: 840 D sl Siemens size of pallet: 500 X 500 mm total power requirement: 46,2 kW weight of the machine ca.: 15 t dimensions of the machine ca.: 5,5 X 3,0 X 2,8 m CNC machining center horizontal DMG MORI-NHX 5000 - 2-fold pallet changer - 15.094h spindle hours Technical details / accessories / supplement: x-travel 730 mm y-travel 730 mm z-travel 880 mm Control 840 D sl Siemens main spindle: max. spindle speed 12,000 rpm Drive power - milling spindle 30 kW Max torque 102Nm Tool holder SK 40 Distance spindle center to table 80 - 810 mm Distance spindle nose and table center 70 - 950 mm Pallet changer: Number of pallets 2 Pallet size 500 x 500 mm max. workpiece weight 500 kg max. workpiece diameter 800 mm max. workpiece height 1,100 mm Pallet change time 9.5 seconds Indexing time 1.3 sec B axis (table) 360 x 1° tool changer: Number o ...

travel -x axis: 1.250 mm travel -y axis: 880 mm travel -z axis: 800 mm control: HEIDENHAIN turning speeds: 10.000 U/min numbers of positions in the tool changer: 120 tool taper: SK50 5-axis simultaneous machining center | DMG - DMC 125 U equipped with automatic B-axis Equipment/accessories: - 4 pallets - Handwheel - Blown air spindle center - Measuring probe: TS 641 The machine is in a well-maintained condition and can be inspected at any time under power. Please find further equipment information about this machine in the original documents included in the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMC125U | DMC-125U | DMC 125U | DMC125 | DMC-125 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm, 400 mm, 400 mm

1 universal milling machine Deckel-Maho DMU 50 T built in 2003 Training machine only 300 hours as good as new Control Heidenhain Mill-Plus IT Spindle speed 20-9000 rpm SK 40 Travel X/Y/Z 500 mm x 400 mm x 400 mm 16-fold tool changer Manual swivel rotary table with display in the control C&B axis electr. Handwheel, Infarot Measuring Device

CNC lathe Manufacturer: Gildemeister Type: CTX 620 Linear V3 Year of construction: 2007 Control: Heidenhain IT Circulation diameter: 800 mm Drive power: 40%/100% ED 43/33 kW Speed range from – to: 20-2500 rpm Weight approx.: 9600 Kg Equipment: Axes: X,Z,C axis Powered Tools: Yes Tool carrier: 12-speed turret Tailstock: Yes Quill Stroke Automatic: Yes Quill mount: MK5 Chip Conveyor: Yes Very good condition. Errors excepted

DMG MORI SEIKI NHX4000 CNC machining center made in 2014 in Germany is an ideal combination of functionality, productivity and precision that can handle even the most complex challenges in a wide range of industries. This technologically advanced machine consists of a single-piece bed with sliding column, reliable components and extensive optional equipment. The machining process takes place inside a large work area, which includes an extremely powerful high-speed spindle, a 4-axis rotary table and a two-pallet system. This system allows uninterrupted machining of multiple workpieces, thus significantly increasing production efficiency and reducing machine downtime to a minimum. In addition, all basic machine components are cooled to increase their service life. The DMG MORI SEIKI horizontal machining center is equipped with optional equipment, including measuring probes, tooling and  ...

Key data: 1050 mm, 800 mm, 560 mm

Machine Type: CNC Vertical Double Column Machining Center Manufacturer: DECKEL-MAHO (DMG) Model: DMC 105 V linear Year of construction: 2008 Condition: very good Offer Type: Used Machine Specifications: Control: Heidenhain iTNC 530 Speed range: 18000 rpm. Spindle holder: HSK-A63 Table: 1200 x 850 mm Travel range: x = 1050 mm y = 800 mm z = 560 mm Rapid traverse speed: in x/y/z = "90m/min." Tool changer: with 60-fold tool magazine Propulsion: 25/35 kW Remark: Heidenhain touch probe for: automatic workpiece measurement, Automatic tool measurement IKZ with high-pressure pump, Spindle cooling, Conveyor electric handwheel Weight: 12000 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

CNC lathe Manufacturer: Gildemeister Type: CTX 410 V3 Year of construction: 2006 Control: Heidenhain IT Circumferential diameter: 505 mm Drive power: 40%/100% ED 28/21 kW Speed range from – to: 25-5000 rpm Weight approx.: 5600 Kg Equipment: Axes: X,Z,C axis Tool carrier: 12-speed turret Tailstock: Yes Quill Stroke Automatic: Yes Quill mounting: MK4 Chip Conveyor: Yes Very good condition. Errors excepted

X-axis: 2500 mm Y-axis: 920 mm Z-axis: 820 mm Work table: 3100 x 900 mm Spindle Exception: SK/ISO40 Spindle speeds: 20 - 18,000 rpm. Tool changer: 30 pcs. Control: Heidenhain iTNC 530 Equipped with: -Conveyor - Cooling by spindle 40 bar - ISO40 tools -Operating instructions Country of origin: Germany Motor power: 35 KW Machine LxWxH: 6000 x 3800 x 2950 mm (transport dimensions) Machine weight: 25.000 kg

- - -: - - - - - - - - -: - - - - - - - - -: - - - - - - Turning Automatic Lathe - swiss lathe | DMG - SPRINT 42 linear The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint42 | Sprint-42 | 42linear The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- - -: - - - - - - - - -: - - - - - - - - -: - - - - - - Turning Automatic Lathe - swiss lathe | DMG - SPRINT 42 linear The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint42 | Sprint-42 | 42linear The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: CNC SIEMENS SINUMERIK 840D with DMG MORI SLIMLine Multi-Touch Control Max. workpiece diameter: 700 mm Max. workpiece length: 1,240 mm Max. bar clearance: 80 mm Max. X-axis: 308 mm Max. Z-axis: 1,240 mm Driven tools VDI40 Spindle speed: 3,250 rpm Tool speed 4,000 rpm. 3- Jaw chuck Kitagawa B-210 Hydr. tailstock, handwheel, chip conveyor, extraction system, door automation, High Pressure Pump

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm spindle turning speed - stepless: 20-14000 U/min weight of the machine ca.: 4 t dimensions of the machine ca.: 5 x 3.5 x 2.7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Heidenhain iTNC 530 x-travel: 450 mm y-travel: 400 mm z-travel: 480 mm b-axis: -95/+30 ° c-axis: 360 ° spindle turning speed - stepless: 12000 U/min weight of the machine ca.: 4.5 t dimensions of the machine ca.: 2.4 x 3.0 x 2.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This DMG GILDEMEISTER CTV 250 Vertical lathe machine was manufactured in 2012 in Germany and has 38984 production hours. It is equipped with a SIEMENS control unit. The machine dispose of a chip conveyor and a high pressure cooling system with paper filter. The revolver head was completely renewed at the end of the previous year.

This DMG MORI CTX2500/1250 Universal Turning Centre was manufactured in 2023 and is brand new. It is available immediately in GERMANY and can be delivered right away. The machine comes with a CELOS / SIEMENS 840D sl Operate Control Unit, 12 ISM 102 main spindle and turnMASTER 8 Y-axis counter spindle. An automation option Robo2Go can be offered additionally upon request. See original brochure attached as PDF and video impressions of CTX2500 series in the video gallery.

This DMG MORI NHX6300 horizontal machining center was made in the year 2018 in Japan and has 429 hours. It is equipped with a DMG MORI ERGOline, CELOS with FANUC control unit, and has 4 axis. The machine has a spindle speed of 8000 rpm.

This DMG MORI LASERTEC 65 3D Hybrid 5-axis precision machine for milling and laser machining was manufactured in the year 2014 in Germany. It is special for the ability to produce components using 3D Printing and to post-process them at the same time. Ideal for manufacturers who need a high-performance additive manufacturing solution of metallic 3D components. The machine features a fixed integration of the laser head in the headstock for greater installation space and more performance. In addition it offers 5-axis material application via coaxial nozzle for uniform powder distribution regardless of the laser build-up direction. It is the ideal dedicated solution for prototypes, small series, repair and coating. This LASERTEC 65 3D is equipped with an integrated SK 40 motor spindle with spindle speed up to 14,000 1/min. In addition it operates with a fiber-guided diode laser of 2.5 kW l ...

This DMG DMC 1035 V ecoline Vertical Machining center was manufactured in the year 2012 in China. It is equipped with a SIEMENS SLIMline control unit and has 3 axis. The machine has a spindle speed of 8000 rpm. Availability is beginning of May 2024, depending on the arrival of a new machine.

This DMG MORI DMC 1150V 3-Axis Vertical Machining Centre was manufactured in the year 2017 in Germany and has 656 spindle hours. It is equipped with a DMG MORI / SIEMENS 840D Solution Line control unit and a 18,000 rpm spindle with SK40. The machine comes with chip conveyor, IKZ (20 bar), oil mist extractor, machine cabin roof, touch probe Heidenhain TS 649 and electronic handwheel. Contact us anytime for further questions!